requires current and desired network parameters, so I have created a network parameter structure and used two on them in the softc. This gives a bit of room of expansion. Re-wrote the update check in _net to work with this.
Tidyed up softc due to above.
Removed startccs and startcmd as they were only used by NetBSDs startup timeout.
Sockstat use netstat tcp/udp socket print, and fstat tcp/udp
socket print, but it just specify all of IPPROTO_IP and
IPPROTO_IPV6 sockets for fstat.
Now IPv6 socket also use raw socket, but only netstat don't print it,
so now they are printed as empty entries in sockstat output.
Approved by: jkh
(Last commit message is not related to this file. This file is mistakenly
committed with last commit of other files.)
Prevent possible kernel panic at tcp_input().
When some IPv4 apps do setsockopt() to control message receipt,
then kernel will panic at control message creation processing.
(Currently, only bgp daemon in KAME package known to cause the problem.)
Submitted by: jinmei@kame.net
Now most big problem of IPv6 is getting IPv6 address
assignment.
6to4 solve the problem. 6to4 addr is defined like below,
2002: 4byte v4 addr : 2byte SLA ID : 8byte interface ID
The most important point of the address format is that an IPv4 addr
is embeded in it. So any user who has IPv4 addr can get IPv6 address
block with 2byte subnet space. Also, the IPv4 addr is used for
semi-automatic IPv6 over IPv4 tunneling.
With 6to4, getting IPv6 addr become dramatically easy.
The attached patch enable 6to4 extension, and confirmed to work,
between "Richard Seaman, Jr." <dick@tar.com> and me.
Approved by: jkh
Reviewed by: itojun
keyboard port and interrupt is enabled and the driver is attached even
when the keyboard itself is not present when the system is booting.
(This has been the behavior through out 2.X and 3.X, but is somehow
broken in 4.0.)
# I certainly don't recommend people to `hot-plug' the AT keyboard,
# because the interface isn't designed for hot-plugging and such act
# will often break the keyboard controller. But, so many people want to
# do that anyway...
Approved by: jkh
ARP packets. This can incorrectly reject complete frames since the frame
could be stored in more than one mbuf.
The following patches fix the length comparisson, and add several
diagnostic log messages to the interrupt handler for out-of-the-norm ARP
packets. This should make ARP problems easier to detect, diagnose and
fix.
Submitted by: C. Stephen Gunn <csg@waterspout.com>
Approved by: jkh
Reviewed by: rwatson
- Add double spaces following full stops to improve typeset output
- mdoc-ification. (Though I'm uncertain whether option values and
contents should be .Dq or something else).
- Fix a missed /etc/ssh change
- Expand wording on RandomSeed and behaviour when X11 isn't forwarded.
- Change examples to literal mode.
- Trim trailing whitespace
PR: docs/17292
Submitted by: Peter Jeremy <peter.jeremy@alcatel.com.au>
VM_PROT_EXECUTE must be added to prot before calling vm_map_find.
Without this change, an mprotect on a shmat'ed region fails (when
it shouldn't). This bug was reported Feb 28 by Brooks Davis
<brooks@one-eyed-alien.net> on -hackers.
Reviewed by: bde
Approved by: jkh
o break out some of the probe routine the allocation of resources
into an attach routine
o Recognize PnP ids
o Allocate IRQ per card rather than per system
o Better polling reporting
o Remove unneeded include files in slot.h
o store a pseudo unit number on each device we find.
o Pass a unit number to interrupt/timeout routine and use it for polling
the hardware.
Tested on: My VAIO and with the Linksys pccard reader.
Approved by: jkh
modem side of my Xircom CreditCard Ethernet+Modem 33.6. Eliminate bad
Xircom entry. Complete IBM Push/Pop Modem(14.4 -> Push/Pop
Modem(14.4K).
Approved in concept by: jkh
particular ISDN card with the 2nd IDE controller and/or other cards
depending on configuration.
The amount of i/o ports allocated are reduced from 0x40 per range to
0x20 per range.
Submitted by: Andrew Gordon <arg@arg1.demon.co.uk>
Approved by: jkh
being accessed after the bp had been releaed. A simple move of the
brelse() solves the problem.
Approved by: jkh
Submitted by: Ian Dowse <iedowse@maths.tcd.ie>
and gids bigger than 16 bits. Added checks for uids and gids that are
bigger than 32 bits.
Approved by: jkh (partly, this fix is bigger than I first intended)
Some inetd internal udp servers didn't worked with problem.
Also fix recvfrom() "fromlen" arg type from int * to socklen_t *.
Approved by: jkh
Submitted by: bde
Without this, kernel will panic at getsockopt() of IPSEC_POLICY.
Also make compilable libipsec/test-policy.c which tries getsockopt() of
IPSEC_POLICY.
Approved by: jkh
Submitted by: sakane@kame.net
