- Adds re-partitioning TLB per core for enabled threads.
- Adds hardware thread id to cpuid mapping
- updates rge driver packet distribution and message ring handling
threads to be started based on hardware thread id.
- remove unused early debugging code to set control registers.
- coding style fixes
Approved by: rrs (mentor)
here, make the style of assertion used by pmap_enter() consistent
across all architectures.
On entry to pmap_remove_write(), assert that the page is neither
unmanaged nor fictitious, since we cannot remove write access to
either kind of page.
With the push down of the page queues lock, pmap_remove_write() cannot
condition its behavior on the state of the PG_WRITEABLE flag if the
page is busy. Assert that the object containing the page is locked.
This allows us to know that the page will neither become busy nor will
PG_WRITEABLE be set on it while pmap_remove_write() is running.
Correct a long-standing bug in vm_page_cowsetup(). We cannot possibly
do copy-on-write-based zero-copy transmit on unmanaged or fictitious
pages, so don't even try. Previously, the call to pmap_remove_write()
would have failed silently.
am now able to run 32 cores ok.. but I still will hang
on buildworld with a NFS problem. I suspect I am missing
a patch for the netlogic rge driver.
JC check and see if I am missing anything except your
core-mask changes
Obtained from: JC
vm_page_try_to_free(). Consequently, push down the page queues lock into
pmap_enter_quick(), pmap_page_wired_mapped(), pmap_remove_all(), and
pmap_remove_write().
Push down the page queues lock into Xen's pmap_page_is_mapped(). (I
overlooked the Xen pmap in r207702.)
Switch to a per-processor counter for the total number of pages cached.
queue length. The default value for this parameter is 50, which is
quite low for many of today's uses and the only way to modify this
parameter right now is to edit if_var.h file. Also add read-only
sysctl with the same name, so that it's possible to retrieve the
current value.
MFC after: 1 month
architecture from page queue lock to a hashed array of page locks
(based on a patch by Jeff Roberson), I've implemented page lock
support in the MI code and have only moved vm_page's hold_count
out from under page queue mutex to page lock. This changes
pmap_extract_and_hold on all pmaps.
Supported by: Bitgravity Inc.
Discussed with: alc, jeffr, and kib
pmap_ts_referenced() is not always appropriate for checking whether or
not pages have been referenced because it clears any reference bits
that it encounters. For example, in mincore(), clearing the reference
bits has two negative consequences. First, it throws off the activity
count calculations performed by the page daemon. Specifically, a page
on which mincore() has called pmap_ts_referenced() looks less active
to the page daemon than it should. Consequently, the page could be
deactivated prematurely by the page daemon. Arguably, this problem
could be fixed by having mincore() duplicate the activity count
calculation on the page. However, there is a second problem for which
that is not a solution. In order to clear a reference on a 4KB page,
it may be necessary to demote a 2/4MB page mapping. Thus, a mincore()
by one process can have the side effect of demoting a superpage
mapping within another process!
physical addresses.
o) Set a local maxmem in sb_machdep.c to avoid trying to use pages over 2^64
under 32-bit ABIs. Our pmap needs corrected to use vm_paddr_t consistently,
then we can make vm_paddr_t 64-bit under 32-bit ABIs and add code in pmap
to limit phys_avail by the maximum PFN that a 32-bit PTE can hold.
o) Use <machine/asm.h> macros for register-width, etc., rather than doing it
by hand in a few more assembly files.
o) Reduce diffs between various bits of TLB refill code in exception.S and
between interrupt processing code.
o) Use PTR_* to operate on registers that are pointers (e.g. sp).
o) Add and use a macro, CLEAR_PTE_SWBITS rather than using the
mysteriously-named WIRED_SHIFT to select bits to truncate when loading PTEs.
o) Don't doubly disable interrupts by moving zero to the status register,
especially since that has the nasty side-effect of taking us out of 64-bit
mode.
o) Use CLEAR_STATUS to disable interrupts the first time.
o) Keep SR_PX set as well as SR_[KSU]X when doing exception processing. This
is the bit that determines whether 64-bit operations are allowed.
o) Don't enable interrupts until configure_final(), like most other ports.
attributes for XKPHYS.
o) Make coprocessor 0 accessor function macros for register+selector registers
take the full name so that e.g. (as done in this commit), prid selector 1
can be written through mips_wr_ebase() rather than mips_wr_prid1().
o) Allow for sign extension of 32-bit segment addresses.
o) Remove an unused MIPS-I register number.
address space for an address as aligned by the new pmap_align_tlb()
function, which is for constraints imposed by the TLB. [1]
o) Add a kmem_alloc_nofault_space() function, which acts like
kmem_alloc_nofault() but allows the caller to specify which find-space
option to use. [1]
o) Use kmem_alloc_nofault_space() with VMFS_TLB_ALIGNED_SPACE to allocate the
kernel stack address on MIPS. [1]
o) Make pmap_align_tlb() on MIPS align addresses so that they do not start on
an odd boundary within the TLB, so that they are suitable for insertion as
wired entries and do not have to share a TLB entry with another mapping,
assuming they are appropriately-sized.
o) Eliminate md_realstack now that the kstack will be appropriately-aligned on
MIPS.
o) Increase the number of guard pages to 2 so that we retain the proper
alignment of the kstack address.
Reviewed by: [1] alc
X-MFC-after: Making sure alc has not come up with a better interface.
o) Mask off PAGE_MASK bits in pmap_update_page, etc., rather than modifying the
badvaddr in trapframe. Some nearby interfaces already did this.
o) Make PTEs "unsigned int" for now, not "unsigned long" -- we are only ready
for them to be 32-bit on 64-bit platforms.
o) Rather than using pmap_segmap and calculating the offset into the page table
by hand in trap.c, use pmap_pte().
o) Remove unused quad_syscall variable in trap.c.
o) Log things for illegal instructions like we do for bad page faults.
o) Various cast cleanups related to how to print registers.
o) When logging page faults, show the page table information not just for the
program counter, but for the fault address.
o) Modify support.S to use ABI-neutral macros for operating on pointers.
o) Consistently use CALLFRAME_SIZ rather than STAND_FRAME_SIZE, etc.
o) Remove unused insque/remque functions.
o) Remove some coprocessor 0 accessor functions implemented in assembly that
are unused and have inline assembly counterparts.
o) Remove NBPG, PGOFSET and PGSHIFT. Use the standard names.
o) Remove some unused macros and move things from param.h to vmparam.h that
belong in the latter. (Actually, all of the kernel segment values, virtual
addresses, etc., belong in one place, but this is a step in the right
direction.)
same time.
o) Remove some unused trivial uart functions from octeon_machdep now that the
uart part is fully working and they are unused.
o) Use __func__ instead of __FUNCTION__.
o) Use intr_*() instead of other routines that do the same thing.
o) Remove some duplicate printfs from the Octeon port, as well as duplicate
setting of Maxmem.
o) Use the right frequency divider on Octeon.
o) Use PCPU_GET(cpuid) consistently to get the cpuid of the running core.
o) Remove some unused macros in the Octeon port.
o) Use mips_sync() around use of the global dpcpu, whose value may not be
visible to APs at first.
o) When loading the first thread's stack, use macros to make the code correct
for n64 as well.
o) Remove stub, do-nothing FAU init/enable/disable functions from the RGMX
driver.
that turned out to be unrelated, and the rest was, as pointed out by Neel,
just wrong-headed.
o) Tweak mem.c to fix use of /dev/kmem for direct-mapped addresses.
ones implemented using assembly.
o) Use TRAPF_USERMODE() consistently rather than USERMODE(). Eliminate
<machine/psl.h> as a result.
o) Use intr_*() rather than *intr(), consistently.
o) Use register_t instead of u_int in some trap code.
o) Merge some more endian-related macros to machine/asm.h from NetBSD.
o) Add PTR_LI macro, which loads an address with the correct sign-extension for
a pointer.
o) Restore interrupts when bailing out due to an excessive IRQ in
nexus_setup_intr().
o) Remove unused functions from psraccess.S.
o) Enter temporary virtual entries for large memory access into the page tables
rather than simply hoping they stay resident in the TLB and we don't need to
do a refill for them.
o) Abstract out large memory mapping setup/teardown using some macros.
o) Do mips_dcache_wbinv_range() when using temporary virtual addresses just
like we do when we can use the direct map.
sparc64.
o) Use uiomove_fromphys rather than the broken fpage mechanism for /dev/mem.
o) Update sf_buf allocator to not share buffers and to do a pmap_qremove when
done with an sf_buf so as to better track valid mappings.
bit.
o) Remove some unused inlines.
o) Generate CP0 access functions for 64-bit TLB registers when building for
n64.
o) Add an inline function version of the COP0_SYNC macro.
subsequently in pmap_pinit() with the following signature:
panic: lock "pmap" 0xc7878bc8 already initialized
This bug was uncovered by the changes made to vm_map.c in r206140.
This causes a panic in vm_thread_dispose() when it tries to add this kstack
to the kstack cache. This happens only when 'td_kstack' is not (PAGE_SIZE * 2)
bytes aligned and we have unmapped the page at that address in cpu_thread_alloc.
Pointed out by: nwhitehorn@
due to rounding the buffer's physical address to the beginning of its
page. This fixes a panic in arge(4) when using PPPoE.
Reported by: Jakob van Santen <vansanten at wisc dot edu>
Reviewed by: gonzo
Obtained from: amd64
