have code that detects this and makes two
transmit descriptors. However its possible
that the algorithm detects when the second
page is not used (when the data aligns perfectly
to the bottom of the page). This caused a 0
len descriptor to be added which locks up the
rge device. Skip such things with a continue.
JC provided this patch... Thanks JC :-)
Obtained from: JC (c.jayachandran@gmail.com)
Specifically on an SMP kernel it was observed that if both the
processors are doing an exit1() via ast()->postsig()->sigexit()
then we will deadlock.
This happens because exit1() calls vmspace_exit() that in turn
calls pmap_invalidate_all(). This function tries to do a
smp_rendezvous() which blocks because the other processor is not
responding to IPIs - because it too is doing AST processing with
interrupts disabled.
The platform that supports SMP currently is a SWARM with a dual-core Sibyte
processor. The kernel config file to use is SWARM_SMP.
Reviewed by: imp, rrs
disabling interrupts.
Simplify register usage - we can directly load 'curpcb' into 'k1' after
interrupts are disabled. There is no need to do so indirectly through 'a1'.
The only reason we need to have the sb_load64() and sb_store64()
functions in assembly is to cheat the compiler and generate the
'ld' and 'sd' instructions which it otherwise will not do when
compiling for a 32-bit architecture. There are some 64-bit
registers in the SCD unit that must be accessed using 64-bit
load and store instructions.
The basic idea is to use a the same virtual address as a window onto
distinct physical memory locations - one per processor. The physical
address that you access through this mapping depends on which cpu you
are currently executing on. We can now use the same virtual address
on any processor to access its per-cpu area.
The details are:
- The virtual address for 'struct pcpu *pcpup' is obtained by
stealing 2 pages worth of KVA in pmap_bootstrap().
- The mapping from the constant virtual address to a distinct
physical page is done in cpu_pcpu_init() through a wired TLB entry.
- A side-effect of this is that we reserve 2 pages worth of memory
for the pcpu but in reality it needs much less than that. The unused
memory is now used as the boot stack for the BSP and APs.
Remove SMP-specific bits from locore.S. The plan is to use a separate
mpboot.S for AP bootstrap.
Discussed on: freebsd-mips
Approved by: imp (mentor)
interrupts must be disabled through the
page_zero's or copys etc. Note that the
temporary mapping used by panic's may
cause us pain since int's may not be disabled.
When we get dumps working we may have to revist
this. Note that with this fix the build got
much much further.. until it hung on disk IO (I
would imagine thats the rge/msgring driver acting
up).
above 4Gig. If so when we add the base address with
the size we will wrap. So for now we just ignore
such memory and only use what we can. When we
get 64 bit working then we will be much better ;->
lacking a copyright/license statement. All these files were in the
Cavium FreeBSD source drop and appear to be written by Cavium (some
are nearly verbatim copies of files from the cnusers' 1.9.0 SDK, which
also uses this copyright).
routine in one place was setting the valid2 bit to
2 not 1. This meant the PTE was NOT valid and so
you would crash.
In Zero Page there was a incorrect setting of
the valid bit AFTER the actual zero (opps)..
Hopefully this will fix the 0xc0000000 crashes
that I have been seeing (unless of course there are
other problems with these old hacks of mine to get
to memory above 512Meg)
the RMI/XLR has the COP0 and COP2 bits enabled
Plus it needs SX too. Thanks again for JC in
catching this ;-)
Submitted by: JC (jayachandranc@netlogicmicro.com
to invalidate memory chunk that starts or ends in the middle of
cache line.
This was responsible for one half of the problem preventing umass
to work reliably on some MIPS32 platforms. USBng needs to stop
sharing cache lines between DMA-able memory and other structures
to cure the other half.
Discussed with: imp, gonzo
locks up in make buildworld.
You need to follow the mips wiki for building
the nfs partition and setup things to mount there
(in the conf and in your bootp setup).
This is a workaround for the fact that the CFE is compiled as a 64-bit
application and therefore sets the SR_KX bit every time we call into
it (for e.g. console).
A TLB miss for any address above 0xc0000000 with the SR_KX bit set will
end up at the XTLB exception vector. We workaround this by copying the
standard TLB handler at the XTLB exception vector.
Approved by: imp (mentor)
through fork_trampoline.
This was caused because we were clearing the SR_INT_IE and setting
SR_EXL bits of the status register at the same time. This meant
that if an interrupt happened while this MTC0 was making its way
through the pipeline the exception processing would see the
status register with SR_EXL bit set. This in turn would mean that
the COP_0_EXC_PC would not be updated so the return from exception
would be to an incorrect address.
It is easy to verify this fix by a program that forks in a loop
and the child just exits:
while (1) {
pid_t pid = vfork();
if (pid == 0)
_exit(0);
if (pid != -1)
waitpid(pid, NULL, 0);
}
Also remove two instances where we set SR_EXL bit gratuitously in exception.S.
Approved by: imp (mentor)
obio. Take advantage of the fact that obio only really supports uart
at the moment to use the uart bus tag always for IOPORT allocations.
# this needs to be redone to conform to FreeBSD standards and allow for
# additional drivers for SoC hardware to attach
in the pcb at the td_lock offset, rather than in the struct thread at
the td_lock offset. And we were storing a pointer to the old thread
rather than to the mutex. Why this didn't always kill us, I'll never
know.
Fix an obsolete comment and update the prototype in the comments.
Also note what variables are in what registers since this function is
a little complex...
neel@ found this problem and proposed this fix. This cures a number
of different problem reports out there, and gets us booting octeon to
the login prompt...
Submitted by: neel@
Reviewed by: rrs@, gonzo@
symbols resolving in DDB
- When zeroing .bss/.sbss do not round end address to page boundary,
it's not neccessary and might destroy data pased by trampoline or
boot loader
available for use. All data below this address considered to be used
by kernel. Along with kernel own data it might be symbol tables
prepeared by trampoline code, boot loader service data passed for
further analysis by kernel, etc... By default kernel_kseg0_end points
to the end of loaded kernel.
- Introduce mips_postboot_fixup function. It checks for symbol information
copied by ELF trampoline and passes it to KDB
o Force the ebase to be 0x80000000 (the base that we're booted with may
need to be respected in the future).
o Initialize the clock early so we can initialize the console early
o use panic where we can now use it.
o Tag some code for parsing the boot records as belonging in the cavium sdk.
o remove support for booting on ancient boards...
# we make it further in bootstrapping now: interrupts being enabled in the
# uarts are now taking us out, it seems, for reasons unknown.
Basically the msg ring interrupt was being re-enabled
inside a spinlock as the thread set it self up for rescheduling.
This won't work since inside the re-enable is another
spin lock.. which means on return from the reenable
the interrupts have been reenabled. Thus you would
get a clock int and end up panicing holding a spin
lock to long :-o
the Cavium version of the boot loader puts data just after &end, so
our rounding up to the next page in clearing memory overwrote their
data, which meant we'd get a lot of wrong values for parameters to the
system.
While I'm here, remove argc/argv parsing. Those values aren't passed
in via a0 and a1, so it was a guaranted panic on some boards.
register from the PCB.
Remove a couple of misleading comments while I am here. The comments are
misleading because they imply that interrupts will be enabled after the
status register is restored from the PCB. This is not the case because
the processor is at the exception level (SR_EXL is set).
Approved by: imp (mentor)
and deactivate_device
- Save state before attaching driver and restore it when
detaching
- Clear CLK bit after last bit of byte has been sent over
the bus providing falling edge for last byte in transfer
- Fix several places where CS0 was always assumed
- Add $FreeBSD$ to ar71xxreg.h
interrupt sources feeding into a hardintr anymore. The
mips_mask_hard_irq() function does that for us while an interrupt is
being processed.
Submitted by: neel@
sorry for the huge firehose on this commit, it would be too tedious
to do file by file
r201881 | imp | 2010-01-08 20:08:22 -0700 (Fri, 08 Jan 2010) | 3 lines
Rename mips_pcpu_init to mips_pcpu0_init since it applies only to the
BSP. Provide a missing prototype.
r201880 | neel | 2010-01-08 19:17:14 -0700 (Fri, 08 Jan 2010) | 7 lines
Compute the target of the jump in the 'J' and 'JAL' instructions
correctly. The 256MB segment is formed by taking the top 4 bits
of the address of the instruction in the "branch delay" slot
as opposed to the 'J' or 'JAL' instruction itself.
r201845 | imp | 2010-01-08 15:48:21 -0700 (Fri, 08 Jan 2010) | 2 lines
Centralize initialization of pcpu, and set curthread early...
r201770 | neel | 2010-01-07 22:53:11 -0700 (Thu, 07 Jan 2010) | 4 lines
Add a DDB command "show pcb" to dump out the contents of a thread's PCB.
r201631 | neel | 2010-01-05 23:42:08 -0700 (Tue, 05 Jan 2010) | 5 lines
Remove all CFE-specific code from locore.S. The CFE entrypoint initialization
is now done in platform-specific code.
r201563 | neel | 2010-01-04 23:58:54 -0700 (Mon, 04 Jan 2010) | 6 lines
This change increases the size of the kernel stack for thread0 from
PAGE_SIZE to (2 * PAGE_SIZE). It depends on the memory allocated by
pmap_steal_memory() being aligned to a PAGE_SIZE boundary.
r200656 | imp | 2009-12-17 16:55:49 -0700 (Thu, 17 Dec 2009) | 7 lines
Place holder ptrace mips module. Not entirely sure what's required
here yet, so I've not connected it to the build. I think that we'll
need to move something into the processor specific part of the mips
port by requiring mips_cpu_ptrace or platform_cpu_ptrace be provided
by the ports to get/set processor specific registers, ala SSE
registers on x86.
r200342 | imp | 2009-12-09 18:42:44 -0700 (Wed, 09 Dec 2009) | 4 lines
app_descriptor_addr is unused (I know it is referened still). And
unnecessary since we pass in a3 unmodified to platform_start.
Eliminate it from here and kill one more TARGET_OCTEON in the process.
r199760 | imp | 2009-11-24 10:15:22 -0700 (Tue, 24 Nov 2009) | 2 lines
Add in Cavium's CID. Report what the unknown CID is.
r199755 | imp | 2009-11-24 09:53:58 -0700 (Tue, 24 Nov 2009) | 5 lines
looks like there's more to this patch than just this one file. I'll
leave it to neel@ to get all the relevant pieces into the tree.
r199754 | imp | 2009-11-24 09:32:31 -0700 (Tue, 24 Nov 2009) | 6 lines
Include opt_cputype.h for all .c and .S files referencing TARGET_OCTEON.
Spell ld script name right.
# for the most part, we need to enhance infrastructure to obviate the need
# for such an intrusive option.
r199753 | imp | 2009-11-24 09:30:29 -0700 (Tue, 24 Nov 2009) | 3 lines
Remove a comment that's bogus.
Include opt_cputype.h since TARGET_OCTEON moved there.
r199752 | imp | 2009-11-24 09:29:23 -0700 (Tue, 24 Nov 2009) | 4 lines
Make sure kstack0 is page aligned.
# this may have been from neel@ for the sibyte stuff
r199742 | imp | 2009-11-24 01:35:11 -0700 (Tue, 24 Nov 2009) | 8 lines
Move the hard-wiring of the dcache on octeon outside of the if
statement. When no caches support was added, it looks like
TARGET_OCTEON was bogusly moved inside the if. Also, include
opt_cputype.h to make TARGET_OCTEON actually active.
# now we die in pmap init somewhere... Most likely because 32MB of RAM is
# too tight given the load address we're using.
r199741 | imp | 2009-11-24 01:21:48 -0700 (Tue, 24 Nov 2009) | 2 lines
TARGET_OCTEON reqiures opt_cputype.h.
r199736 | imp | 2009-11-24 00:40:38 -0700 (Tue, 24 Nov 2009) | 2 lines
Prefer ANSI spellings of uintXX_t, etc.
r199598 | imp | 2009-11-20 09:30:35 -0700 (Fri, 20 Nov 2009) | 3 lines
Horrible kludge to make octeon32 work. I think a better way is to
move the generic code into the config files....
r199597 | imp | 2009-11-20 09:27:50 -0700 (Fri, 20 Nov 2009) | 4 lines
cast vaddr to uintptr_t before casting it to a bus_space_handle_t.
# I'm sure this indicates a problem, but I'm not sure what...
r199496 | gonzo | 2009-11-18 15:52:05 -0700 (Wed, 18 Nov 2009) | 5 lines
- Add cpu_init_interrupts function that is supposed to
prepeare stuff required for spinning out interrupts later
- Add API for managing intrcnt/intrnames arrays
- Some minor style(9) fixes
r199246 | neel | 2009-11-13 02:24:09 -0700 (Fri, 13 Nov 2009) | 10 lines
Make pmap_copy_page() L2-cache friendly by doing the copy through the
cacheable window on physical memory (KSEG0). On the Sibyte processor
going through the uncacheable window (KSEG1) bypasses both L1 and L2
caches so we may end up with stale contents in the L2 cache.
This also makes it consistent with the rest of the function that
uses cacheable mappings to copy pages.
Approved by: imp (mentor)
r198842 | gonzo | 2009-11-02 23:42:55 -0700 (Mon, 02 Nov 2009) | 3 lines
- Handle errors when adding children to nexus. This sittuation
might occure when there is dublicate of child's entry in hints
r198669 | rrs | 2009-10-30 02:53:11 -0600 (Fri, 30 Oct 2009) | 5 lines
With this commit our friend RMI will now compile. I have
not tested it and the chances of it running yet are about
ZERO.. but it will now compile. The hard part now begins,
making it run ;-)
r198569 | neel | 2009-10-28 23:18:02 -0600 (Wed, 28 Oct 2009) | 5 lines
Deal with overflow of the COUNT register correctly. The 'cycles_per_hz'
has nothing to do with the rollover.
r198550 | imp | 2009-10-28 11:03:20 -0600 (Wed, 28 Oct 2009) | 3 lines
Remove useless for statement. i isn't used after it.
Remove needless braces.
r198534 | gonzo | 2009-10-27 21:34:05 -0600 (Tue, 27 Oct 2009) | 8 lines
- Fix busdma sync: dcache invalidation operates on cache line aligned
addresses and could modify areas of memory that share the same cache
line at the beginning and at the ending of the buffer. In order to
prevent a data loss we save these chunks in temporary buffer before
invalidation and restore them afer it.
Idea suggested by: cognet
r198531 | gonzo | 2009-10-27 18:01:20 -0600 (Tue, 27 Oct 2009) | 3 lines
- Remove bunch of declared but not defined cach-related variables
- Add mips_picache_linesize and mips_pdcache_linesize variables
r198530 | gonzo | 2009-10-27 17:45:48 -0600 (Tue, 27 Oct 2009) | 3 lines
- Replace stubs with actual cache info
- minor style(9) fix
r198355 | neel | 2009-10-21 22:35:32 -0600 (Wed, 21 Oct 2009) | 11 lines
Remove redundant instructions from tlb.S
The "_MTC0 v0, COP_0_TLB_HI" is actually incorrect because v0 has not been
initialized at that point. It worked correctly because we subsequently
did the right thing and initialized TLB_HI correctly.
The "li v0, MIPS_KSEG0_START" is redundant because we do exactly the same
thing 2 instructions down.
r198354 | neel | 2009-10-21 20:51:31 -0600 (Wed, 21 Oct 2009) | 9 lines
Get rid of the hardcoded constants to define cacheable memory:
SDRAM_ADDR_START, SDRAM_ADDR_END and SDRAM_MEM_SIZE
Instead we now keep a copy of the memory regions enumerated by
platform-specific code and use that to determine whether an address
is cacheable or not.
r198310 | gonzo | 2009-10-20 17:13:08 -0600 (Tue, 20 Oct 2009) | 5 lines
- Commit missing part of "bt" fix: store PC register in pcb_context struct
in cpu_switch and use it in stack_trace function later. pcb_regs contains
state of the process stored by exception handler and therefor is not
valid for sleeping processes.
r198264 | neel | 2009-10-19 22:36:08 -0600 (Mon, 19 Oct 2009) | 5 lines
Fix a bug where we would think that the L1 instruction and data cache are
present even though the line size field in the CP0 Config1 register is 0.
r198208 | imp | 2009-10-18 09:21:48 -0600 (Sun, 18 Oct 2009) | 3 lines
Get the PC from the trap frame, since it isn't saved as part of the
pcb regs.
r198205 | imp | 2009-10-18 08:55:55 -0600 (Sun, 18 Oct 2009) | 3 lines
Use correct signature for MipsEmulateBranch. The other one doesn't
work for 64-bit compiles.
r198182 | gonzo | 2009-10-16 18:22:07 -0600 (Fri, 16 Oct 2009) | 11 lines
- Use PC/RA/SP values as arguments for stacktrace_subr instead of trapframe.
Context info could be obtained from other sources (see below) no only from
td_pcb field
- Do not show a0..a3 values unless they're obtained from the stack. These
are only confirmed values.
- Fix bt command in DDB. Previous implementation used thread's trapframe
structure as a source info for trace unwinding, but this structure
is filled only when exception occurs. Valid register values for sleeping
processes are in pcb_context array. For curthread use pc/sp/ra for current
frame
r198181 | gonzo | 2009-10-16 16:52:18 -0600 (Fri, 16 Oct 2009) | 2 lines
- Get rid of label_t. It came from NetBSD and was used only in one place
r198066 | gonzo | 2009-10-13 19:43:53 -0600 (Tue, 13 Oct 2009) | 5 lines
- Move stack tracing function to db_trace.c
- Axe unused extern MipsXXX declarations
- Move all declarations for functions in exceptions.S/swtch.S
from trap.c to respective headers
r197796 | gonzo | 2009-10-05 17:19:51 -0600 (Mon, 05 Oct 2009) | 2 lines
- Revert part of r197685 because this change leads to wrong data in cache.
r197685 | gonzo | 2009-10-01 14:05:36 -0600 (Thu, 01 Oct 2009) | 2 lines
- Sync caches properly when dealing with sf_buf
r197014 | imp | 2009-09-08 21:57:10 -0600 (Tue, 08 Sep 2009) | 2 lines
Ugly hack to get this to compile. I'm sure there's a better way...
r197013 | imp | 2009-09-08 21:54:55 -0600 (Tue, 08 Sep 2009) | 2 lines
First half of making this 64-bit clean: fix prototypes.
r196988 | gonzo | 2009-09-08 13:15:29 -0600 (Tue, 08 Sep 2009) | 2 lines
- MFC from head@196987
r196313 | imp | 2009-08-17 06:14:40 -0600 (Mon, 17 Aug 2009) | 2 lines
suword64 and csuword64. Needed by ELF64 stuff...
r196266 | imp | 2009-08-15 16:51:11 -0600 (Sat, 15 Aug 2009) | 5 lines
(1) Fix a few 32/64-bit bugs.
(2) Also, always allocate 2 pages for the stack to optimize TLB usage.
Submitted by: neel@ (2)
r196265 | imp | 2009-08-15 16:48:09 -0600 (Sat, 15 Aug 2009) | 2 lines
Various 32/64-bit confusion cleanups.
r196264 | imp | 2009-08-15 16:45:46 -0600 (Sat, 15 Aug 2009) | 6 lines
(1) Some CPUs have a range to map I/O cyces on the pci bus. So allow
them to work by allowding the nexus to assign ports.
(2) Remove some Octeon junk that shouldn't be necessary.
Submitted by: neel@ (#1) for SB1 port.
r196061 | gonzo | 2009-08-04 11:32:55 -0600 (Tue, 04 Aug 2009) | 2 lines
- Use register_t for registers values
r195984 | gonzo | 2009-07-30 17:48:29 -0600 (Thu, 30 Jul 2009) | 4 lines
- Properly unwind stack for functions with __noreturn__ attribute
Submitted by: Neelkanth Natu <neelnatu@yahoo.com>
r195983 | gonzo | 2009-07-30 17:29:59 -0600 (Thu, 30 Jul 2009) | 4 lines
- mark map as coherent if requested by flags
- explicitly set memory allocation method in map flags instead
of duplicating conditions for malloc/contigalloc
r195584 | imp | 2009-07-10 13:09:34 -0600 (Fri, 10 Jul 2009) | 3 lines
Use PTR_* macros for pointers, and not potentially mips64 unsafe
operations.
r195583 | imp | 2009-07-10 13:08:48 -0600 (Fri, 10 Jul 2009) | 2 lines
Use PTR_* macros to deal with pointers.
r195579 | imp | 2009-07-10 13:04:32 -0600 (Fri, 10 Jul 2009) | 2 lines
use ta0-ta3 rather than t4-t7 for n32/n64 goodness.
r195511 | gonzo | 2009-07-09 13:02:17 -0600 (Thu, 09 Jul 2009) | 3 lines
- Ooops, this debug code wasn't supposed to get into
final commit. My appologises.
r195478 | gonzo | 2009-07-08 16:28:36 -0600 (Wed, 08 Jul 2009) | 5 lines
- Port busdma code from FreeBSD/arm. This is more mature version
that takes into account all limitation to DMA memory (boundaries,
alignment) and implements bounce pages.
- Add BUS_DMASYNC_POSTREAD case to bus_dmamap_sync_buf
r195438 | imp | 2009-07-08 00:00:18 -0600 (Wed, 08 Jul 2009) | 2 lines
Turns out this code was right, revert last change.
r195429 | gonzo | 2009-07-07 13:55:09 -0600 (Tue, 07 Jul 2009) | 5 lines
- Move dpcpu initialization to mips_proc0_init. It's
more appropriate place for it. Besides dpcpu_init
requires pmap module to be initialized and calling it
int pmap.c hangs the system
r195399 | imp | 2009-07-06 01:49:24 -0600 (Mon, 06 Jul 2009) | 2 lines
Prefer uintptr_t to int cast here.
r195398 | imp | 2009-07-06 01:48:31 -0600 (Mon, 06 Jul 2009) | 3 lines
Better types for 64-bit compatibility. Use %p and cast to void * and
prefer uintptr_t to other int-type casts.
r195397 | imp | 2009-07-06 01:47:39 -0600 (Mon, 06 Jul 2009) | 2 lines
No need to force mips32 here.
r195396 | imp | 2009-07-06 01:46:13 -0600 (Mon, 06 Jul 2009) | 3 lines
Pass in the uint64 value, rather than a pointer to it. that's what
the function expects...
r195395 | imp | 2009-07-06 01:45:02 -0600 (Mon, 06 Jul 2009) | 3 lines
Use ta0 instead of t4 and ta1 instead of t5. These map to the same
registers on O32 builds, but t4 and t5 don't exist on N32 or N64.
r195394 | imp | 2009-07-06 01:43:50 -0600 (Mon, 06 Jul 2009) | 3 lines
Use better casts for passing the small integer as a pointer here.
Basically, replace int with uintptr_t.
r195393 | imp | 2009-07-06 01:42:54 -0600 (Mon, 06 Jul 2009) | 5 lines
(1) Improvements for SB1. only allow real memory to be accessed.
(2) make compile n64 by using more-proper casts.
Submitted by: Neelkanth Natu (1)
r195373 | imp | 2009-07-05 09:23:54 -0600 (Sun, 05 Jul 2009) | 5 lines
(1) Use PTR_LA rather than bare la for N64 goodness (it is dla there)
(2) SB1 needs COHERENT policy, not cached for the config register
Submitted by: (2) Neelkanth Natu
r195372 | imp | 2009-07-05 09:22:22 -0600 (Sun, 05 Jul 2009) | 3 lines
use "PTR_LA" in preference to a bare la so it translates to dla on
64-bit ABIs.
r195371 | imp | 2009-07-05 09:21:35 -0600 (Sun, 05 Jul 2009) | 6 lines
Now that we define atomic_{load,store}_64 inline in atomic.h, we don't
need to define them here for the !N64 case.
We now define atomic_readandclear_64 in atomic.h, so no need to repeat
it here.
r195364 | imp | 2009-07-05 09:10:07 -0600 (Sun, 05 Jul 2009) | 5 lines
use %p in preference to 0x%08x for printing register_t values. Cast
them to void * first. This neatly solves the "how do I print a
register_t" problem because sizeof(void *) is always the same as
sizeof(register_t), afaik.
r195353 | imp | 2009-07-05 00:46:54 -0600 (Sun, 05 Jul 2009) | 6 lines
Publish PAGE_SHIFT to assembler
# we should likely phase out PGSHIFT
Submitted by: Neelkanth Natu
r195350 | imp | 2009-07-05 00:39:37 -0600 (Sun, 05 Jul 2009) | 7 lines
Switch to ABI agnostic ta0-ta3. Provide defs for this in the right
places. Provide n32/n64 register name defintions. This should have
no effect for the O32 builds that everybody else uses, but should help
make N64 builds possible (lots of other changes are needed for that).
Obtained from: NetBSD (for the regdef.h changes)
r195334 | imp | 2009-07-03 21:22:34 -0600 (Fri, 03 Jul 2009) | 6 lines
Move from using the lame invalid address I chose when trying to get
Octeon going... Turns out that you get tlb shutdowns with this...
Use PGSHIFT instead of PAGE_SHIFT.
Submitted by: Neelkanth Natu
r195147 | gonzo | 2009-06-28 15:01:00 -0600 (Sun, 28 Jun 2009) | 2 lines
- Replace casuword and casuword32 stubs with proper implementation
r195128 | gonzo | 2009-06-27 17:27:41 -0600 (Sat, 27 Jun 2009) | 4 lines
- Add support for handling TLS area address in kernel space.
From the userland point of view get/set operations are
performed using sysarch(2) call.
r195127 | gonzo | 2009-06-27 17:01:35 -0600 (Sat, 27 Jun 2009) | 4 lines
- Make cpu_set_upcall_kse conform MIPS ABI. T9 should be
the same as PC in subroutine entry point
- Preserve interrupt mask
r194938 | gonzo | 2009-06-24 20:15:04 -0600 (Wed, 24 Jun 2009) | 3 lines
- Invalidate cache in pmap_qenter. Fixes corruption of data
that comes through pipe (may be other bugs)
r194505 | gonzo | 2009-06-19 13:02:40 -0600 (Fri, 19 Jun 2009) | 5 lines
- Keep interrupts mask intact by RESTORE_CPU in MipsKernGenException
trap() function re-enables interrupts if exception happened with
interrupts enabled and therefor status register might be modified
by interrupt filters
r194277 | gonzo | 2009-06-15 20:36:21 -0600 (Mon, 15 Jun 2009) | 2 lines
- Remove debug printfs
r194275 | gonzo | 2009-06-15 19:43:33 -0600 (Mon, 15 Jun 2009) | 2 lines
- Handle KSEG0/KSEG1 addresses for /dev/mem as well. netstat requires it
r193491 | gonzo | 2009-06-05 03:21:03 -0600 (Fri, 05 Jun 2009) | 6 lines
- Status register should be set last in RESTORE_CPU in order
to prevent race over k0, k1 registers.
- Update interrupts mask in saved status register for
MipsUserIntr and MipsUserGenException. It might be
modified by intr filter or ithread.
r192864 | gonzo | 2009-05-26 16:40:12 -0600 (Tue, 26 May 2009) | 4 lines
- Replace CPU_NOFPU and SOFTFLOAT options with CPU_FPU. By default
we assume that there is no FPU, because majority of SoC does
not have it.
r192794 | gonzo | 2009-05-26 00:20:50 -0600 (Tue, 26 May 2009) | 5 lines
- Preserve INT_MASK fields in Status register across
context switches. They should be modified only by
interrupt setup/teardown and pre_ithread/post_ithread
functions
r192793 | gonzo | 2009-05-26 00:02:38 -0600 (Tue, 26 May 2009) | 2 lines
- Remove erroneus "break" instruction, it was meant for debug
r192792 | gonzo | 2009-05-26 00:01:17 -0600 (Tue, 26 May 2009) | 2 lines
- Remove now unused NetBSDism intr.h
r192791 | gonzo | 2009-05-25 23:59:05 -0600 (Mon, 25 May 2009) | 7 lines
- Provide proper pre_ithread/post_ithread functions for both
hard and soft interrupts
- Do not handle masked interrupts
- Do not write Cause register because most bytes are read-only and
writing the same byte to RW fields are pointless. And in case of
software interrupt utterly wrong
r192664 | gonzo | 2009-05-23 13:42:23 -0600 (Sat, 23 May 2009) | 4 lines
- cpu_establish_hardintr modifies INT_MASK of Status
register, so we should use disableintr/restoreintr that
modifies only IE bit.
r192655 | gonzo | 2009-05-23 12:00:20 -0600 (Sat, 23 May 2009) | 6 lines
- Remove stale comments
- Replace a1 with k1 to while restoring context. a1 was there by mistake,
interrupts are disabled at this point and it's safe to use k0, k1.
This code never was reached beacasue current Status register handling
prevented interrupta from user mode.
r192496 | gonzo | 2009-05-20 17:07:10 -0600 (Wed, 20 May 2009) | 4 lines
- Invalidate caches for respective areain KSEG0 in order
to prevent further overwriting of KSEG1 data with
writeback.
r192364 | gonzo | 2009-05-18 20:43:21 -0600 (Mon, 18 May 2009) | 6 lines
- Cleanup ticker initialization code. For some MIPS cpu Counter
register increments only every second cycle. The only timing
references for us is Count value. Therefore it's better to convert
frequencies related to it and use them. Besides cleanup this commit
fixes twice more then requested sleep interval problem.
r192176 | gonzo | 2009-05-15 20:34:03 -0600 (Fri, 15 May 2009) | 3 lines
- Add informational title for cache info lines to separate
them from environment variables dump
r192119 | gonzo | 2009-05-14 15:26:07 -0600 (Thu, 14 May 2009) | 3 lines
- Off by one check fix. Check for last address in region
to fit in KSEG1
r191841 | gonzo | 2009-05-05 20:55:43 -0600 (Tue, 05 May 2009) | 5 lines
- Use index ops in order to avoid TLBMiss exceptions when flushing caches
on mapping removal
- Writeback all VA for page that is being copied in pmap_copy_page to
guaranty up-to-date data in SDRAM
r191613 | gonzo | 2009-04-27 20:59:18 -0600 (Mon, 27 Apr 2009) | 4 lines
- When destroying va -> pa mapping writeback all caches or we may endup
with partial page content in SDRAM
- style(9) fix
r191583 | gonzo | 2009-04-27 12:46:57 -0600 (Mon, 27 Apr 2009) | 5 lines
- Use new spacebus
- Be a bit more verbose on failures
- style(9) fixes
- Use default rid value of 0 instead of MIPS_MEM_RID (0x20)
r191577 | gonzo | 2009-04-27 12:29:59 -0600 (Mon, 27 Apr 2009) | 4 lines
- Use naming convention the same as MIPS spec does: eliminate _sel1 sufix
and just use selector number. e.g. mips_rd_config_sel1 -> mips_rd_config1
- Add WatchHi/WatchLo accessors for selctors 1..3 (for debug purposes)
r191453 | gonzo | 2009-04-23 23:28:44 -0600 (Thu, 23 Apr 2009) | 4 lines
Fix cut'n'paste code. cfg3 should get the value of selector 3
Spotted by: thompa@
r191452 | gonzo | 2009-04-23 22:18:16 -0600 (Thu, 23 Apr 2009) | 2 lines
- Print supported CPU capabilities during stratup
r191448 | gonzo | 2009-04-23 21:38:51 -0600 (Thu, 23 Apr 2009) | 2 lines
- Fix whitespace to conform style(9)
r191282 | gonzo | 2009-04-19 16:02:14 -0600 (Sun, 19 Apr 2009) | 3 lines
- Make mips_bus_space_generic be of type bus_space_tag_t instead of
struct bus_space and update all relevant places.
r191084 | gonzo | 2009-04-14 20:28:26 -0600 (Tue, 14 Apr 2009) | 6 lines
Use FreeBSD/arm approach for handling bus space access: space tag is a pointer
to bus_space structure that defines access methods and hence every bus can
define own accessors. Default space is mips_bus_space_generic. It's a simple
interface to physical memory, values are read with regard to host system
byte order.
r191083 | gonzo | 2009-04-14 19:47:52 -0600 (Tue, 14 Apr 2009) | 4 lines
- Cleanout stale #ifdef'ed chunk of code
- Fix whitespaces
- Explicitly undefine NEXUS_DEBUG flag
r191079 | gonzo | 2009-04-14 16:53:22 -0600 (Tue, 14 Apr 2009) | 2 lines
- Revert changes accidentally killed by merge operation
------------------------------------------------------------------------
r187512 | gonzo | 2009-01-20 22:49:30 -0700 (Tue, 20 Jan 2009) | 4 lines
- Check if maddr/msize hints are there before setting hinted
resources to device
- Check for irq hint too
r187418 | gonzo | 2009-01-18 19:37:10 -0700 (Sun, 18 Jan 2009) | 4 lines
- Add trampoline stuff for bootloaders that do not support ELF
- Replace arm'ish KERNPHYSADDR/KERNVIRTADDR with
KERNLOADADDR/TRAMPLOADADDR and clean configs
r201881 | imp | 2010-01-08 20:08:22 -0700 (Fri, 08 Jan 2010) | 3 lines
Rename mips_pcpu_init to mips_pcpu0_init since it applies only to the
BSP. Provide a missing prototype.
r201845 | imp | 2010-01-08 15:48:21 -0700 (Fri, 08 Jan 2010) | 2 lines
Centralize initialization of pcpu, and set curthread early...
r198669 | rrs | 2009-10-30 02:53:11 -0600 (Fri, 30 Oct 2009) | 5 lines
With this commit our friend RMI will now compile. I have
not tested it and the chances of it running yet are about
ZERO.. but it will now compile. The hard part now begins,
making it run ;-)
r198154 | rrs | 2009-10-15 15:03:32 -0600 (Thu, 15 Oct 2009) | 10 lines
Does 4 things:
1) Adds future RMI directories
2) Places intr_machdep.c in specfic files.arch pointing to the generic
intr_machdep.c. This allows us to have an architecture dependant intr_machdep.c
(which we will need for RMI) in the machine specific directory
3) removes intr_machdep.c from files.mips
4) Adds some TARGET_XLR_XLS ifdef's for the machine specific intra_machdep.h. We
may need to look at finding a better place to put this. But first I want to
get this thing compiling.
r194213 | gonzo | 2009-06-14 15:04:54 -0600 (Sun, 14 Jun 2009) | 2 lines
- Fix prototype and implementation of admsw_shutdown
r192790 | gonzo | 2009-05-25 23:52:24 -0600 (Mon, 25 May 2009) | 2 lines
- Provide proper pre_ithread/post_ithread functions
r191282 | gonzo | 2009-04-19 16:02:14 -0600 (Sun, 19 Apr 2009) | 3 lines
- Make mips_bus_space_generic be of type bus_space_tag_t instead of
struct bus_space and update all relevant places.
r191084 | gonzo | 2009-04-14 20:28:26 -0600 (Tue, 14 Apr 2009) | 6 lines
Use FreeBSD/arm approach for handling bus space access: space tag is a pointer
to bus_space structure that defines access methods and hence every bus can
define own accessors. Default space is mips_bus_space_generic. It's a simple
interface to physical memory, values are read with regard to host system
byte order.
r201881 | imp | 2010-01-08 20:08:22 -0700 (Fri, 08 Jan 2010) | 3 lines
Rename mips_pcpu_init to mips_pcpu0_init since it applies only to the
BSP. Provide a missing prototype.
r201845 | imp | 2010-01-08 15:48:21 -0700 (Fri, 08 Jan 2010) | 2 lines
Centralize initialization of pcpu, and set curthread early...
r201631 | neel | 2010-01-05 23:42:08 -0700 (Tue, 05 Jan 2010) | 5 lines
Remove all CFE-specific code from locore.S. The CFE entrypoint initialization
is now done in platform-specific code.
Approved by: imp (mentor)
r198669 | rrs | 2009-10-30 02:53:11 -0600 (Fri, 30 Oct 2009) | 5 lines
With this commit our friend RMI will now compile. I have
not tested it and the chances of it running yet are about
ZERO.. but it will now compile. The hard part now begins,
making it run ;-)
r198154 | rrs | 2009-10-15 15:03:32 -0600 (Thu, 15 Oct 2009) | 10 lines
Does 4 things:
1) Adds future RMI directories
2) Places intr_machdep.c in specfic files.arch pointing to the generic
intr_machdep.c. This allows us to have an architecture dependant
intr_machdep.c (which we will need for RMI) in the machine specific
directory
3) removes intr_machdep.c from files.mips
4) Adds some TARGET_XLR_XLS ifdef's for the machine specific intra_machdep.h. We
may need to look at finding a better place to put this. But first I want to
get this thing compiling.
r196236 | imp | 2009-08-14 19:03:13 -0600 (Fri, 14 Aug 2009) | 3 lines
Fix style error replicated multiple times. Move to
mips_bus_space_generic for octeon obio impl.
r191282 | gonzo | 2009-04-19 16:02:14 -0600 (Sun, 19 Apr 2009) | 3 lines
- Make mips_bus_space_generic be of type bus_space_tag_t instead of
struct bus_space and update all relevant places.
r187415 | gonzo | 2009-01-18 16:49:02 -0700 (Sun, 18 Jan 2009) | 3 lines
- Move Silicon Backplanes code out to system-wide level (dev/siba) as
it's going to be used not only for siba5 devices.
r201881 | imp | 2010-01-08 20:08:22 -0700 (Fri, 08 Jan 2010) | 3 lines
Rename mips_pcpu_init to mips_pcpu0_init since it applies only to the
BSP. Provide a missing prototype.
r198669 | rrs | 2009-10-30 02:53:11 -0600 (Fri, 30 Oct 2009) | 5 lines
With this commit our friend RMI will now compile. I have
not tested it and the chances of it running yet are about
ZERO.. but it will now compile. The hard part now begins,
making it run ;-)
r198154 | rrs | 2009-10-15 15:03:32 -0600 (Thu, 15 Oct 2009) | 10 lines
Does 4 things:
1) Adds future RMI directories
2) Places intr_machdep.c in specfic files.arch pointing to the generic
intr_machdep.c. This allows us to have an architecture dependant
intr_machdep.c (which we will need for RMI) in the machine specific
directory
3) removes intr_machdep.c from files.mips
4) Adds some TARGET_XLR_XLS ifdef's for the machine specific intra_machdep.h. We
may need to look at finding a better place to put this. But first I want to
get this thing compiling.
r196836 | gonzo | 2009-09-04 13:02:11 -0600 (Fri, 04 Sep 2009) | 2 lines
- Clean out some XXXMIPS comments that's not relevant now
r196236 | imp | 2009-08-14 19:03:13 -0600 (Fri, 14 Aug 2009) | 3 lines
Fix style error replicated multiple times. Move to
mips_bus_space_generic for octeon obio impl.
r195496 | imp | 2009-07-09 09:04:52 -0600 (Thu, 09 Jul 2009) | 2 lines
Don't force ISA_MIPS32.
r195495 | imp | 2009-07-09 09:04:24 -0600 (Thu, 09 Jul 2009) | 4 lines
Make the yamon function pointer stuff 64-bit safe. Make the base
unsigned long, and sign extend the address of the function we're
calling through.
r195494 | imp | 2009-07-09 08:54:09 -0600 (Thu, 09 Jul 2009) | 3 lines
Addresses should be unsigned long. Make the address constants
unsigned long.
r194929 | gonzo | 2009-06-24 16:42:52 -0600 (Wed, 24 Jun 2009) | 6 lines
- Do not use hardcoded uart speed
- Call mips_timer_early_init before initializing uart in order
to make DELAY usable for ns8250 driver
Submitted by: Neelkanth Natu
r194212 | gonzo | 2009-06-14 14:54:46 -0600 (Sun, 14 Jun 2009) | 2 lines
- Fix prototypes to make compiler happy
r192864 | gonzo | 2009-05-26 16:40:12 -0600 (Tue, 26 May 2009) | 4 lines
- Replace CPU_NOFPU and SOFTFLOAT options with CPU_FPU. By default
we assume that there is no FPU, because majority of SoC does
not have it.
r192788 | gonzo | 2009-05-25 22:51:56 -0600 (Mon, 25 May 2009) | 3 lines
- Provide proper pre_thread/post_ithread functions for GT PCI
controller.
r191282 | gonzo | 2009-04-19 16:02:14 -0600 (Sun, 19 Apr 2009) | 3 lines
- Make mips_bus_space_generic be of type bus_space_tag_t instead of
struct bus_space and update all relevant places.
r191084 | gonzo | 2009-04-14 20:28:26 -0600 (Tue, 14 Apr 2009) | 6 lines
Use FreeBSD/arm approach for handling bus space access: space tag is a pointer
to bus_space structure that defines access methods and hence every bus can
define own accessors. Default space is mips_bus_space_generic. It's a simple
interface to physical memory, values are read with regard to host system
byte order.
I think these are the relevant changes, but definitely are a superset
of them. Software archaeologists are invited to check the branch
itself for the details.
r199695 | imp | 2009-11-23 00:49:50 -0700 (Mon, 23 Nov 2009) | 2 lines
Specify loader script and load address
r198263 | neel | 2009-10-19 22:31:20 -0600 (Mon, 19 Oct 2009) | 7 lines
The default KERNLOADADDR does not work on MALTA hardware. On my platform the
"First free SDRAM address" reported by YAMON is 0x800b6e61.
So use a conservative KERNLOADADDR of 0x80100000.
Approved by: imp (mentor)
r194163 | imp | 2009-06-14 00:12:21 -0600 (Sun, 14 Jun 2009) | 2 lines
Kludge: pretend to be ISA_MIPS32 for the moment.
r192864 | gonzo | 2009-05-26 16:40:12 -0600 (Tue, 26 May 2009) | 4 lines
- Replace CPU_NOFPU and SOFTFLOAT options with CPU_FPU. By default
we assume that there is no FPU, because majority of SoC does
not have it.
r187461 | gonzo | 2009-01-19 21:24:03 -0700 (Mon, 19 Jan 2009) | 3 lines
- KERNLOADADDR should be defined with makeoption.
Redboot loads kernel now
r187418 | gonzo | 2009-01-18 19:37:10 -0700 (Sun, 18 Jan 2009) | 4 lines
- Add trampoline stuff for bootloaders that do not support ELF
- Replace arm'ish KERNPHYSADDR/KERNVIRTADDR with
KERNLOADADDR/TRAMPLOADADDR and clean configs
Merge support for very early alchemy port. I wouldn't merge this
except I don't want it to get lost when we retire projects/mips.
Should be consiered pre-alpha at this stage. Also, alchemy is now
owned by rmi, but started out life as a separate processor line, so
I'm leaving it in its own directory rather than try to shoe-horn it
into the unrelated rmi directory. Its future location is an open
question.
r201881 | imp | 2010-01-08 20:08:22 -0700 (Fri, 08 Jan 2010) | 3 lines
Rename mips_pcpu_init to mips_pcpu0_init since it applies only to the
BSP. Provide a missing prototype.
r200343 | imp | 2009-12-09 18:44:11 -0700 (Wed, 09 Dec 2009) | 4 lines
Get the sense of this right. We use uintpr_t for bus_addr_t when
we're building everything except octeon && 32-bit. As note before, we
need a clearner way, but at least now the hack is right.
r199760 | imp | 2009-11-24 10:15:22 -0700 (Tue, 24 Nov 2009) | 2 lines
Add in Cavium's CID. Report what the unknown CID is.
r199754 | imp | 2009-11-24 09:32:31 -0700 (Tue, 24 Nov 2009) | 6 lines
Include opt_cputype.h for all .c and .S files referencing TARGET_OCTEON.
Spell ld script name right.
r199599 | imp | 2009-11-20 09:32:26 -0700 (Fri, 20 Nov 2009) | 2 lines
Another kludge for 64-bit bus_addr_t with 32-bit pointers...
r199496 | gonzo | 2009-11-18 15:52:05 -0700 (Wed, 18 Nov 2009) | 5 lines
- Add cpu_init_interrupts function that is supposed to
prepeare stuff required for spinning out interrupts later
- Add API for managing intrcnt/intrnames arrays
- Some minor style(9) fixes
r198958 | rrs | 2009-11-05 11:15:47 -0700 (Thu, 05 Nov 2009) | 2 lines
For XLR adds extern for its bus space routines
r198669 | rrs | 2009-10-30 02:53:11 -0600 (Fri, 30 Oct 2009) | 5 lines
With this commit our friend RMI will now compile. I have
not tested it and the chances of it running yet are about
ZERO.. but it will now compile. The hard part now begins,
making it run ;-)
r198666 | imp | 2009-10-29 18:37:50 -0600 (Thu, 29 Oct 2009) | 2 lines
Add some newer MIPS CO cores.
r198665 | imp | 2009-10-29 18:37:04 -0600 (Thu, 29 Oct 2009) | 4 lines
db_expr_t is really closer to a register_t.
Submitted by: bde@
r198531 | gonzo | 2009-10-27 18:01:20 -0600 (Tue, 27 Oct 2009) | 3 lines
- Remove bunch of declared but not defined cach-related variables
- Add mips_picache_linesize and mips_pdcache_linesize variables
r198354 | neel | 2009-10-21 20:51:31 -0600 (Wed, 21 Oct 2009) | 9 lines
Get rid of the hardcoded constants to define cacheable memory:
SDRAM_ADDR_START, SDRAM_ADDR_END and SDRAM_MEM_SIZE
Instead we now keep a copy of the memory regions enumerated by
platform-specific code and use that to determine whether an address
is cacheable or not.
r198310 | gonzo | 2009-10-20 17:13:08 -0600 (Tue, 20 Oct 2009) | 5 lines
- Commit missing part of "bt" fix: store PC register in pcb_context struct
in cpu_switch and use it in stack_trace function later. pcb_regs contains
state of the process stored by exception handler and therefor is not
valid for sleeping processes.
r198207 | imp | 2009-10-18 08:57:04 -0600 (Sun, 18 Oct 2009) | 2 lines
Undo spamage of last MFC.
r198206 | imp | 2009-10-18 08:56:33 -0600 (Sun, 18 Oct 2009) | 3 lines
_ALIGN has to return u_long, since pointers don't fit into u_int in
64-bit mips.
r198182 | gonzo | 2009-10-16 18:22:07 -0600 (Fri, 16 Oct 2009) | 11 lines
- Use PC/RA/SP values as arguments for stacktrace_subr instead of trapframe.
Context info could be obtained from other sources (see below) no only from
td_pcb field
- Do not show a0..a3 values unless they're obtained from the stack. These
are only confirmed values.
- Fix bt command in DDB. Previous implementation used thread's trapframe
structure as a source info for trace unwinding, but this structure
is filled only when exception occurs. Valid register values for sleeping
processes are in pcb_context array. For curthread use pc/sp/ra for current
frame
r198181 | gonzo | 2009-10-16 16:52:18 -0600 (Fri, 16 Oct 2009) | 2 lines
- Get rid of label_t. It came from NetBSD and was used only in one place
r198154 | rrs | 2009-10-15 15:03:32 -0600 (Thu, 15 Oct 2009) | 10 lines
Does 4 things:
1) Adds future RMI directories
2) Places intr_machdep.c in specfic files.arch pointing to the generic
intr_machdep.c. This allows us to have an architecture dependant
intr_machdep.c (which we will need for RMI) in the machine specific
directory
3) removes intr_machdep.c from files.mips
4) Adds some TARGET_XLR_XLS ifdef's for the machine specific intra_machdep.h. We
may need to look at finding a better place to put this. But first I want to
get this thing compiling.
r198066 | gonzo | 2009-10-13 19:43:53 -0600 (Tue, 13 Oct 2009) | 5 lines
- Move stack tracing function to db_trace.c
- Axe unused extern MipsXXX declarations
- Move all declarations for functions in exceptions.S/swtch.S
from trap.c to respective headers
r197685 | gonzo | 2009-10-01 14:05:36 -0600 (Thu, 01 Oct 2009) | 2 lines
- Sync caches properly when dealing with sf_buf
r196215 | imp | 2009-08-14 10:15:18 -0600 (Fri, 14 Aug 2009) | 6 lines
(u_int) is the wrong type here. Use unsigned long instead, even
though that's only less wrong...
r196199 | imp | 2009-08-13 13:47:13 -0600 (Thu, 13 Aug 2009) | 7 lines
Use unsigned long instead of unsigned for the integer casts here. The
former works for both ILP32 and LP64 programming models, while the
latter fails LP64.
r196089 | gonzo | 2009-08-09 19:49:59 -0600 (Sun, 09 Aug 2009) | 4 lines
- Make i/d cache size field 32-bit to prevent overflow
Submited by: Neelkanth Natu
r195582 | imp | 2009-07-10 13:07:07 -0600 (Fri, 10 Jul 2009) | 2 lines
fix prototype for MipsEmulateBranch.
r195581 | imp | 2009-07-10 13:06:43 -0600 (Fri, 10 Jul 2009) | 2 lines
Better definitions for a few types for n32/n64.
r195580 | imp | 2009-07-10 13:06:15 -0600 (Fri, 10 Jul 2009) | 5 lines
Fixed aligned macros...
r195478 | gonzo | 2009-07-08 16:28:36 -0600 (Wed, 08 Jul 2009) | 5 lines
- Port busdma code from FreeBSD/arm. This is more mature version
that takes into account all limitation to DMA memory (boundaries,
alignment) and implements bounce pages.
- Add BUS_DMASYNC_POSTREAD case to bus_dmamap_sync_buf
r195440 | imp | 2009-07-08 00:01:37 -0600 (Wed, 08 Jul 2009) | 2 lines
Fix atomic_store_64 prototype for 64-bit systems.
r195392 | imp | 2009-07-05 20:27:03 -0600 (Sun, 05 Jul 2009) | 3 lines
The MCOUNT macro isn't going to work in 64-bit mode. Add a note to
this effect.
r195391 | imp | 2009-07-05 20:22:51 -0600 (Sun, 05 Jul 2009) | 3 lines
Provide a macro for PTR_ADDU as well. We may need to implement this
differently for N32... Use PTR_ADDU in DO_AST macro.
r195390 | imp | 2009-07-05 20:22:06 -0600 (Sun, 05 Jul 2009) | 4 lines
Change the addu here to daddu.
addu paranoina prodded by: jmallet@
r195382 | imp | 2009-07-05 15:16:26 -0600 (Sun, 05 Jul 2009) | 5 lines
addu and subu are special. We need to use daddu and dsubu here to get
proper behavior.
Submitted by: jmallet@
r195370 | imp | 2009-07-05 09:20:16 -0600 (Sun, 05 Jul 2009) | 6 lines
The SB1 has cohernet memory, so add it.
Also, Maxmem is better as a long.
Submitted by: Neelkanth Natu
r195369 | imp | 2009-07-05 09:19:28 -0600 (Sun, 05 Jul 2009) | 4 lines
The SB1 needs a special value for the cache field of the pte.
Submitted by: Neelkanth Natu
r195368 | imp | 2009-07-05 09:18:06 -0600 (Sun, 05 Jul 2009) | 2 lines
compute the areas to save registers in for 64-bit access correctly.
r195367 | imp | 2009-07-05 09:17:11 -0600 (Sun, 05 Jul 2009) | 3 lines
First cut at 64-bit types. not 100% sure these are all correct for
N32 ABI.
r195366 | imp | 2009-07-05 09:16:27 -0600 (Sun, 05 Jul 2009) | 3 lines
Trim unreferenced goo. SDRAM likely should be next, but it is still
referenced.
r195365 | imp | 2009-07-05 09:13:24 -0600 (Sun, 05 Jul 2009) | 9 lines
First cut at atomics for 64-bit machines and SMP machines.
# Note: Cavium provided a port that has atomics similar to these, but
# that does a syncw; sync; atomic; sync; syncw where we just do the classic
# mips 'atomic' operation (eg ll; frob; sc). It is unclear to me why
# the extra is needed. Since my initial target is one core, I'll defer
# investigation until I bring up multiple cores. syncw is an octeon specific
# instruction.
r195359 | imp | 2009-07-05 02:14:00 -0600 (Sun, 05 Jul 2009) | 4 lines
Bring in cdefs.h from NetBSD to define ABI goo.
Obtained from: NetBSD
r195358 | imp | 2009-07-05 02:13:19 -0600 (Sun, 05 Jul 2009) | 4 lines
Pull in machine/cdefs.h for the ABI definitions. Provide a PTR_LA,
ala sgi, and use it in preference to a bare 'la' so that it gets
translated to a 'dla' for the 64-bit pointer ABIs.
r195357 | imp | 2009-07-05 01:01:34 -0600 (Sun, 05 Jul 2009) | 2 lines
Use uintptr_t rather than unsigned here for 64-bit correctness.
r195356 | imp | 2009-07-05 01:00:51 -0600 (Sun, 05 Jul 2009) | 6 lines
Define __ELF_WORD_SIZE appropriately for n64. Note for N32 I believe
this is correct. While registers are 64-bit, n32 is a 32-bit ABI and
lives in a 32-bit world (with explicit 64-bit registers, however).
Change an 8, which was 4 + 4 or sizeof(int) + SZREG to be a simple '4
+ SZREG' to reflect the actual offset of the structure in question.
r195355 | imp | 2009-07-05 00:56:51 -0600 (Sun, 05 Jul 2009) | 7 lines
(1) Use uintptr_t in preference to unsigned. The latter isn't right for
64-bit case, while the former is.
(2) include a SB1 specific coherency mapping
Submitted by: Neelkanth Nath (2)
r195352 | imp | 2009-07-05 00:44:37 -0600 (Sun, 05 Jul 2009) | 3 lines
db_expr_t should be a intptr_t, not an int. These expressions can be
addresses or numbers, and that's a intptr_t if I ever saw one.
r195351 | imp | 2009-07-05 00:43:01 -0600 (Sun, 05 Jul 2009) | 4 lines
Define COP0_SYNC for SB1 CPU.
Submitted by: Neelkanth Natu
r195350 | imp | 2009-07-05 00:39:37 -0600 (Sun, 05 Jul 2009) | 7 lines
Switch to ABI agnostic ta0-ta3. Provide defs for this in the right
places. Provide n32/n64 register name defintions. This should have
no effect for the O32 builds that everybody else uses, but should help
make N64 builds possible (lots of other changes are needed for that).
Obtained from: NetBSD (for the regdef.h changes)
r195128 | gonzo | 2009-06-27 17:27:41 -0600 (Sat, 27 Jun 2009) | 4 lines
- Add support for handling TLS area address in kernel space.
From the userland point of view get/set operations are
performed using sysarch(2) call.
r195076 | gonzo | 2009-06-26 13:54:06 -0600 (Fri, 26 Jun 2009) | 2 lines
- Add guards to ensure that these files are included only once
r194469 | gonzo | 2009-06-18 22:43:49 -0600 (Thu, 18 Jun 2009) | 16 lines
- Mark temp variable as "earlyclobber" in assembler inline in
atomic_fetchadd_32. Without it gcc would use it as input
register for v and sometimes generate following code for
function call like atomic_fetchadd_32(&(fp)->f_count, -1):
801238b4: 2402ffff li v0,-1
801238b8: c2230018 ll v1,24(s1)
801238bc: 00431021 addu v0,v0,v1
801238c0: e2220018 sc v0,24(s1)
801238c4: 1040fffc beqz v0,801238b8 <dupfdopen+0x2e8>
801238c8: 00000000 nop
Which is definitly wrong because if sc fails v0 is set to 0
and previous value of -1 is overriden hence whole operation
turns to bogus
r194164 | imp | 2009-06-14 00:14:25 -0600 (Sun, 14 Jun 2009) | 3 lines
bye bye. This is no longer referenced, but much code from it will
resurface for a bus-space implementation.
r194160 | imp | 2009-06-14 00:10:36 -0600 (Sun, 14 Jun 2009) | 3 lines
Cavium-specific goo is no longer necessary here. Of course, I now
have to write a bus space for cavium, but that shouldn't be too hard.
r194157 | imp | 2009-06-14 00:01:46 -0600 (Sun, 14 Jun 2009) | 2 lines
Move this to a more approrpiate plae.
r194156 | imp | 2009-06-13 23:29:13 -0600 (Sat, 13 Jun 2009) | 2 lines
Bring this in from the cavium port.
r193487 | gonzo | 2009-06-05 02:37:11 -0600 (Fri, 05 Jun 2009) | 2 lines
- Use restoreintr instead of enableint while accessing pcpu in DO_AST
r192864 | gonzo | 2009-05-26 16:40:12 -0600 (Tue, 26 May 2009) | 4 lines
- Replace CPU_NOFPU and SOFTFLOAT options with CPU_FPU. By default
we assume that there is no FPU, because majority of SoC does
not have it.
r192817 | gonzo | 2009-05-26 10:35:05 -0600 (Tue, 26 May 2009) | 2 lines
- Add type cast for atomic_cmpset_acq_ptr arguments
r192792 | gonzo | 2009-05-26 00:01:17 -0600 (Tue, 26 May 2009) | 2 lines
- Remove now unused NetBSDism intr.h
r192177 | gonzo | 2009-05-15 20:39:13 -0600 (Fri, 15 May 2009) | 4 lines
- Add MIPS_IS_KSEG0_ADDR, MIPS_IS_KSEG1_ADDR and MIPS_IS_VALID_PTR
macroses thet check if address belongs to KSEG0, KSEG1 or both
of them respectively.
r191589 | gonzo | 2009-04-27 13:18:55 -0600 (Mon, 27 Apr 2009) | 3 lines
- Cast argument to proper type in order to avoid warnings like
"shift value is too large for given type"
r191577 | gonzo | 2009-04-27 12:29:59 -0600 (Mon, 27 Apr 2009) | 4 lines
- Use naming convention the same as MIPS spec does: eliminate _sel1 sufix
and just use selector number. e.g. mips_rd_config_sel1 -> mips_rd_config1
- Add WatchHi/WatchLo accessors for selctors 1..3 (for debug purposes)
r191451 | gonzo | 2009-04-23 22:17:21 -0600 (Thu, 23 Apr 2009) | 4 lines
- Define accessor functions for CP0 Config(16) register selects 1, 2, 3.
Content of these registers is defined in MIPS spec and can be used
for obtaining info about CPU capabilities.
r191282 | gonzo | 2009-04-19 16:02:14 -0600 (Sun, 19 Apr 2009) | 3 lines
- Make mips_bus_space_generic be of type bus_space_tag_t instead of
struct bus_space and update all relevant places.
r191084 | gonzo | 2009-04-14 20:28:26 -0600 (Tue, 14 Apr 2009) | 6 lines
Use FreeBSD/arm approach for handling bus space access: space tag is a pointer
to bus_space structure that defines access methods and hence every bus can
define own accessors. Default space is mips_bus_space_generic. It's a simple
interface to physical memory, values are read with regard to host system
byte order.
r201881 | imp | 2010-01-08 20:08:22 -0700 (Fri, 08 Jan 2010) | 3 lines
Rename mips_pcpu_init to mips_pcpu0_init since it applies only to the
BSP. Provide a missing prototype.
r201845 | imp | 2010-01-08 15:48:21 -0700 (Fri, 08 Jan 2010) | 2 lines
Centralize initialization of pcpu, and set curthread early...
r198669 | rrs | 2009-10-30 02:53:11 -0600 (Fri, 30 Oct 2009) | 5 lines
With this commit our friend RMI will now compile. I have
not tested it and the chances of it running yet are about
ZERO.. but it will now compile. The hard part now begins,
making it run ;-)
r198154 | rrs | 2009-10-15 15:03:32 -0600 (Thu, 15 Oct 2009) | 10 lines
Does 4 things:
1) Adds future RMI directories
2) Places intr_machdep.c in specfic files.arch pointing to the generic
intr_machdep.c. This allows us to have an architecture dependant
intr_machdep.c (which we will need for RMI) in the machine specific
directory
3) removes intr_machdep.c from files.mips
4) Adds some TARGET_XLR_XLS ifdef's for the machine specific intra_machdep.h. We
may need to look at finding a better place to put this. But first I want to
get this thing compiling.
r194216 | gonzo | 2009-06-14 15:16:23 -0600 (Sun, 14 Jun 2009) | 2 lines
- Fix prototypes to make compiler happy
r194215 | gonzo | 2009-06-14 15:16:04 -0600 (Sun, 14 Jun 2009) | 2 lines
- Get rid of mask_fn and fix pre_filter/post_filter functions' prototypes
r191282 | gonzo | 2009-04-19 16:02:14 -0600 (Sun, 19 Apr 2009) | 3 lines
- Make mips_bus_space_generic be of type bus_space_tag_t instead of
struct bus_space and update all relevant places.
r191084 | gonzo | 2009-04-14 20:28:26 -0600 (Tue, 14 Apr 2009) | 6 lines
Use FreeBSD/arm approach for handling bus space access: space tag is a pointer
to bus_space structure that defines access methods and hence every bus can
define own accessors. Default space is mips_bus_space_generic. It's a simple
interface to physical memory, values are read with regard to host system
byte order.
Copy sys/dev/rmi to sys/mips/rmi/dev [sic]. For devices that are on
only one SoC, or family of SoC, we place them under sys/<vendor>/dev.
I'll fix the build problems this causes as best I can since rmi kernel
require external toolchains due to lack of support for rmi op-codes in
the ancient binutils we have in the tree.
Copy the support files for the Octeon 1 CPU from sys/mips/octeon1 on
the projects/mips side to sys/mips/cavium on the head side to conform
to the other vendor code. This code was contributed by Cavium to the
project and forward ported by Warner Losh, with some additional code
from Randal Stewart.
# I'll fix the building problems the move creates in a future commit.
Copy over the support files (except sys/conf and sys/mips/conf) for
RMI XLR processor support. This port has been contributed by RMI and
brought up to date by Randal Stewart (rrs@). This port is a work in
progress, and there might still be significant changes. The port
makes it to multi-user, but is still early beta.
Merge support files for the Atheros AR71xx (and soon AR9xxx)
processors, except files from sys/conf and sys/mips/conf. This work
was done primarily by Olecksandr Tymoshenko and works on the
RouterStation and RouterStation PRO. Other AR71xx-based boards have
been reported as working as well (RouterBoard, for example).
Copy the files for the sibyte support (except files in sys/conf and
sys/mips/conf). This targets the Broadcom SWARM board (bcm91250) and
the SB-1 core in the BCM1250 SoC. This work was done by Neel Natu.
r195128 | gonzo | 2009-06-27 17:27:41 -0600 (Sat, 27 Jun 2009) | 4 lines
- Add support for handling TLS area address in kernel space.
From the userland point of view get/set operations are
performed using sysarch(2) call.
correctly. The 256MB segment is formed by taking the top 4 bits
of the address of the instruction in the "branch delay" slot
as opposed to the 'J' or 'JAL' instruction itself.
Approved by: imp (mentor)
PAGE_SIZE to (2 * PAGE_SIZE). It depends on the memory allocated by
pmap_steal_memory() being aligned to a PAGE_SIZE boundary.
Approved by: imp (mentor)
This replaces d_mmap() with the d_mmap2() implementation and also
changes the type of offset to vm_ooffset_t.
Purge d_mmap2().
All driver modules will need to be rebuilt since D_VERSION is also
bumped.
Reviewed by: jhb@
MFC after: Not in this lifetime...
here yet, so I've not connected it to the build. I think that we'll
need to move something into the processor specific part of the mips
port by requiring mips_cpu_ptrace or platform_cpu_ptrace be provided
by the ports to get/set processor specific registers, ala SSE
registers on x86.
statement. When no caches support was added, it looks like
TARGET_OCTEON was bogusly moved inside the if. Also, include
opt_cputype.h to make TARGET_OCTEON actually active.
# now we die in pmap init somewhere... Most likely because 32MB of RAM is
# too tight given the load address we're using.
