a non-loss reset.
When the drain functions are called, the holding descriptor and link pointers
are NULLed out.
But when the processq function is called during a non-loss reset, this
doesn't occur. So the next time a DMA occurs, it's chained to a descriptor
that no longer exists and the hardware gets angry.
Tested:
* AR5416, STA mode; use sysctl dev.ath.X.forcebstuck=1 to force a non-loss
reset.
TODO:
* Further AR9380 testing just to check that the behaviour for the EDMA
chips is sane.
PR: kern/178477
before using said node.
The "blessed" way here is to take a node reference before referencing
anything inside the node, otherwise the node can be freed between
the time the pointer is copied/dereferenced and the time the node contents
are used.
This mirrors fixes that I've done elsewhere in the net80211/driver
stack.
PR: kern/178470
the beaglebone-specific .dts file.
Add a new .dts for the BeagleBone Black with more memory,
slightly different pinmux initialization, and with mmchs1
configured (though the latter doesn't quite work yet).
been printed. This provides compatibility with other *nix systems
(including Linux).
While here use stdbool booleans for 'all'.
PR: bin/178295
Submitted by: Levent Serinol <lserinol@gmail.com>
Reviewed by: will
options OCTEON_VENDOR_GEFES to enable support for these boards, to
match changes that GE publishes to the Octeon Simple Executive. Since
board types overlap with other boards, it is unlikely that we will
properly boot on other Octeon boards with OCTEON_VENDOR_GEFES enabled.
Tested extensively on the WANIC 6354, but I retained support for all
the other models. Some features need changes in the base kernel, and
those are in progress.
An array-type stat in vmm.ko is defined as follows:
VMM_STAT_ARRAY(IPIS_SENT, VM_MAXCPU, "ipis sent to vcpu");
It is incremented as follows:
vmm_stat_array_incr(vm, vcpuid, IPIS_SENT, array_index, 1);
And output of 'bhyvectl --get-stats' looks like:
ipis sent to vcpu[0] 3114
ipis sent to vcpu[1] 0
Reviewed by: grehan
Obtained from: NetApp
the Linux tree that they always include this chip in their FDT, so
make support for the ds1337 opt-out rather than opt-in. Now my boards
boot with the correct time.
The ability to clear a file descriptor's close-on-exec flag via
posix_spawn_file_actions_adddup2() is in fact proposed in Austin Group issue
#411.
MFC after: 1 week
Convert the structures to C99 style initialisation, which makes it
a lot easier to check that all of them are set and to generate a
derived template from them.
Sponsored by: DARPA, AFRL
MFC after: 2 weeks
assigned conflicting ranges to BARs then leaving the BARs alone could
result in one device stealing mmio accesses intended to go to a second
device. Prior to 233677 the PCI bus driver attempted to handle this case
by clearing the BAR to 0 depending on BARs based at 0 not decoding (which
is not guaranteed to be true). Now when a conflicting BAR is detected the
following steps are taken:
1) If hw.pci.realloc_bars (a new tunable) is enabled (default is enabled),
then ignore the current BAR setting from the firmware and attempt to
allocate a fresh resource range for the BAR.
2) If 1) failed (or was disabled), disable decoding for the relevant
BAR type (e.g. disable mem decoding for a memory BAR) and emit a
warning if booting verbose.
Tested by: Alex Keda <admin@lissyara.su>
MFC after: 1 week
to 63 bit positions.
Do not fill the save area and do not set the saved bit in the xstate
bit vector for the state which is not marked as enabled in xsave_mask.
Reported and tested by: Jim Ohlstein <jim@ohlste.in>
MFC after: 3 days
irrespective of the setting of lem_rx_process_limit, while
giving a chance to the taskqueue scheduler to act after
each chunk.
This makes lem_rxeof similar to the one in if_em.c and if_igb.c .
if_lem.c and if_em.c: add a sysctl to manually configure the
'itr' moderation register.
Approved by: Jack Vogel
As per POSIX.1-2008, posix_spawn_file_actions_add* return [EBADF] if a file
descriptor is negative, not [EINVAL]. The bug was only in the manual page;
the code is correct.
MFC after: 1 week
locks. To support this, VNODE locks are created with the LK_IS_VNODE
flag. This flag is propagated down using the LO_IS_VNODE flag.
Note that WITNESS still records the LOR. Only the printing and the
optional entering into the kernel debugger is bypassed with the
WITNESS_NO_VNODE option.
all requested data was sent. The reason is that xfsize <= 0 condition
must not be tested at all if space == loopbytes. Otherwise, the done
is set to 1, and sendfile(2) is aborted too early.
Instead of moving the condition to exiting the inner loop after the
xfersize check, directly check for the completed transfer before the
testing of the available space in the socket buffer, and revert item 1
of r248830. It is arguably another bug to sleep waiting for socket
buffer space (or return EAGAIN for non-blocking socket) if all bytes
are already transferred.
Reported by: pho
Discussed with: scottl, gibbs
Tested by: scottl (stable/9 backport), pho
bsnmp modules are located.
Section 3 (Library Functions) looks wrong for this manual page, which
contains only module description, that is why initially it was located
to section 8 (System Manager's Manual). On the other hand manual
pages for all other bsnmpd modules are already located in the section
3, and having all pages in one section looks more consistent. Also,
currently, similarly to manuals for other modules, snmp_hast manual
contains LIBRARY section, which is not good style for section 8.
Requested by: joel
X-MFC with: r250379
redefine such operations for different consumers.
This will be used when NUMA support will be finished and numaset
will need to be used.
Sponsored by: EMC / Isilon storage division
Obtained from: jeff
Reviewed by: alc
of "right".)
Flip back on the "always continue TX DMA using the holding descriptor"
code - by always setting ATH_BUF_BUSY and never setting axq_link to NULL.
Since the holding descriptor is accessed via txq->axq_link and _that_
is done behind the TXQ lock rather than the TX path lock, the holding
descriptor stuff itself needs to be behind the TXQ lock.
So, do the mental gymnastics needed to do this.
I've not seen any of the hardware failures that I was seeing when
I last tried to do this.
Tested:
* AR5416, STA mode
