This change includes support for SCSI SMR drives (which conform to the
Zoned Block Commands or ZBC spec) and ATA SMR drives (which conform to
the Zoned ATA Command Set or ZAC spec) behind SAS expanders.
This includes full management support through the GEOM BIO interface, and
through a new userland utility, zonectl(8), and through camcontrol(8).
This is now ready for filesystems to use to detect and manage zoned drives.
(There is no work in progress that I know of to use this for ZFS or UFS, if
anyone is interested, let me know and I may have some suggestions.)
Also, improve ATA command passthrough and dispatch support, both via ATA
and ATA passthrough over SCSI.
Also, add support to camcontrol(8) for the ATA Extended Power Conditions
feature set. You can now manage ATA device power states, and set various
idle time thresholds for a drive to enter lower power states.
Note that this change cannot be MFCed in full, because it depends on
changes to the struct bio API that break compatilibity. In order to
avoid breaking the stable API, only changes that don't touch or depend on
the struct bio changes can be merged. For example, the camcontrol(8)
changes don't depend on the new bio API, but zonectl(8) and the probe
changes to the da(4) and ada(4) drivers do depend on it.
Also note that the SMR changes have not yet been tested with an actual
SCSI ZBC device, or a SCSI to ATA translation layer (SAT) that supports
ZBC to ZAC translation. I have not yet gotten a suitable drive or SAT
layer, so any testing help would be appreciated. These changes have been
tested with Seagate Host Aware SATA drives attached to both SAS and SATA
controllers. Also, I do not have any SATA Host Managed devices, and I
suspect that it may take additional (hopefully minor) changes to support
them.
Thanks to Seagate for supplying the test hardware and answering questions.
sbin/camcontrol/Makefile:
Add epc.c and zone.c.
sbin/camcontrol/camcontrol.8:
Document the zone and epc subcommands.
sbin/camcontrol/camcontrol.c:
Add the zone and epc subcommands.
Add auxiliary register support to build_ata_cmd(). Make sure to
set the CAM_ATAIO_NEEDRESULT, CAM_ATAIO_DMA, and CAM_ATAIO_FPDMA
flags as appropriate for ATA commands.
Add a new get_ata_status() function to parse ATA result from SCSI
sense descriptors (for ATA passthrough over SCSI) and ATA I/O
requests.
sbin/camcontrol/camcontrol.h:
Update the build_ata_cmd() prototype
Add get_ata_status(), zone(), and epc().
sbin/camcontrol/epc.c:
Support for ATA Extended Power Conditions features. This includes
support for all features documented in the ACS-4 Revision 12
specification from t13.org (dated February 18, 2016).
The EPC feature set allows putting a drive into a power power mode
immediately, or setting timeouts so that the drive will
automatically enter progressively lower power states after various
idle times.
sbin/camcontrol/fwdownload.c:
Update the firmware download code for the new build_ata_cmd()
arguments.
sbin/camcontrol/zone.c:
Implement support for Shingled Magnetic Recording (SMR) drives
via SCSI Zoned Block Commands (ZBC) and ATA Zoned Device ATA
Command Set (ZAC).
These specs were developed in concert, and are functionally
identical. The primary differences are due to SCSI and ATA
differences. (SCSI is big endian, ATA is little endian, for
example.)
This includes support for all commands defined in the ZBC and
ZAC specs.
sys/cam/ata/ata_all.c:
Decode a number of additional ATA command names in ata_op_string().
Add a new CCB building function, ata_read_log().
Add ata_zac_mgmt_in() and ata_zac_mgmt_out() CCB building
functions. These support both DMA and NCQ encapsulation.
sys/cam/ata/ata_all.h:
Add prototypes for ata_read_log(), ata_zac_mgmt_out(), and
ata_zac_mgmt_in().
sys/cam/ata/ata_da.c:
Revamp the ada(4) driver to support zoned devices.
Add four new probe states to gather information needed for zone
support.
Add a new adasetflags() function to avoid duplication of large
blocks of flag setting between the async handler and register
functions.
Add new sysctl variables that describe zone support and paramters.
Add support for the new BIO_ZONE bio, and all of its subcommands:
DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP,
DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS.
sys/cam/scsi/scsi_all.c:
Add command descriptions for the ZBC IN/OUT commands.
Add descriptions for ZBC Host Managed devices.
Add a new function, scsi_ata_pass() to do ATA passthrough over
SCSI. This will eventually replace scsi_ata_pass_16() -- it
can create the 12, 16, and 32-byte variants of the ATA
PASS-THROUGH command, and supports setting all of the
registers defined as of SAT-4, Revision 5 (March 11, 2016).
Change scsi_ata_identify() to use scsi_ata_pass() instead of
scsi_ata_pass_16().
Add a new scsi_ata_read_log() function to facilitate reading
ATA logs via SCSI.
sys/cam/scsi/scsi_all.h:
Add the new ATA PASS-THROUGH(32) command CDB. Add extended and
variable CDB opcodes.
Add Zoned Block Device Characteristics VPD page.
Add ATA Return SCSI sense descriptor.
Add prototypes for scsi_ata_read_log() and scsi_ata_pass().
sys/cam/scsi/scsi_da.c:
Revamp the da(4) driver to support zoned devices.
Add five new probe states, four of which are needed for ATA
devices.
Add five new sysctl variables that describe zone support and
parameters.
The da(4) driver supports SCSI ZBC devices, as well as ATA ZAC
devices when they are attached via a SCSI to ATA Translation (SAT)
layer. Since ZBC -> ZAC translation is a new feature in the T10
SAT-4 spec, most SATA drives will be supported via ATA commands
sent via the SCSI ATA PASS-THROUGH command. The da(4) driver will
prefer the ZBC interface, if it is available, for performance
reasons, but will use the ATA PASS-THROUGH interface to the ZAC
command set if the SAT layer doesn't support translation yet.
As I mentioned above, ZBC command support is untested.
Add support for the new BIO_ZONE bio, and all of its subcommands:
DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP,
DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS.
Add scsi_zbc_in() and scsi_zbc_out() CCB building functions.
Add scsi_ata_zac_mgmt_out() and scsi_ata_zac_mgmt_in() CCB/CDB
building functions. Note that these have return values, unlike
almost all other CCB building functions in CAM. The reason is
that they can fail, depending upon the particular combination
of input parameters. The primary failure case is if the user
wants NCQ, but fails to specify additional CDB storage. NCQ
requires using the 32-byte version of the SCSI ATA PASS-THROUGH
command, and the current CAM CDB size is 16 bytes.
sys/cam/scsi/scsi_da.h:
Add ZBC IN and ZBC OUT CDBs and opcodes.
Add SCSI Report Zones data structures.
Add scsi_zbc_in(), scsi_zbc_out(), scsi_ata_zac_mgmt_out(), and
scsi_ata_zac_mgmt_in() prototypes.
sys/dev/ahci/ahci.c:
Fix SEND / RECEIVE FPDMA QUEUED in the ahci(4) driver.
ahci_setup_fis() previously set the top bits of the sector count
register in the FIS to 0 for FPDMA commands. This is okay for
read and write, because the PRIO field is in the only thing in
those bits, and we don't implement that further up the stack.
But, for SEND and RECEIVE FPDMA QUEUED, the subcommand is in that
byte, so it needs to be transmitted to the drive.
In ahci_setup_fis(), always set the the top 8 bits of the
sector count register. We need it in both the standard
and NCQ / FPDMA cases.
sys/geom/eli/g_eli.c:
Pass BIO_ZONE commands through the GELI class.
sys/geom/geom.h:
Add g_io_zonecmd() prototype.
sys/geom/geom_dev.c:
Add new DIOCZONECMD ioctl, which allows sending zone commands to
disks.
sys/geom/geom_disk.c:
Add support for BIO_ZONE commands.
sys/geom/geom_disk.h:
Add a new flag, DISKFLAG_CANZONE, that indicates that a given
GEOM disk client can handle BIO_ZONE commands.
sys/geom/geom_io.c:
Add a new function, g_io_zonecmd(), that handles execution of
BIO_ZONE commands.
Add permissions check for BIO_ZONE commands.
Add command decoding for BIO_ZONE commands.
sys/geom/geom_subr.c:
Add DDB command decoding for BIO_ZONE commands.
sys/kern/subr_devstat.c:
Record statistics for REPORT ZONES commands. Note that the
number of bytes transferred for REPORT ZONES won't quite match
what is received from the harware. This is because we're
necessarily counting bytes coming from the da(4) / ada(4) drivers,
which are using the disk_zone.h interface to communicate up
the stack. The structure sizes it uses are slightly different
than the SCSI and ATA structure sizes.
sys/sys/ata.h:
Add many bit and structure definitions for ZAC, NCQ, and EPC
command support.
sys/sys/bio.h:
Convert the bio_cmd field to a straight enumeration. This will
yield more space for additional commands in the future. After
change r297955 and other related changes, this is now possible.
Converting to an enumeration will also prevent use as a bitmask
in the future.
sys/sys/disk.h:
Define the DIOCZONECMD ioctl.
sys/sys/disk_zone.h:
Add a new API for managing zoned disks. This is very close to
the SCSI ZBC and ATA ZAC standards, but uses integers in native
byte order instead of big endian (SCSI) or little endian (ATA)
byte arrays.
This is intended to offer to the complete feature set of the ZBC
and ZAC disk management without requiring the application developer
to include SCSI or ATA headers. We also use one set of headers
for ioctl consumers and kernel bio-level consumers.
sys/sys/param.h:
Bump __FreeBSD_version for sys/bio.h command changes, and inclusion
of SMR support.
usr.sbin/Makefile:
Add the zonectl utility.
usr.sbin/diskinfo/diskinfo.c
Add disk zoning capability to the 'diskinfo -v' output.
usr.sbin/zonectl/Makefile:
Add zonectl makefile.
usr.sbin/zonectl/zonectl.8
zonectl(8) man page.
usr.sbin/zonectl/zonectl.c
The zonectl(8) utility. This allows managing SCSI or ATA zoned
disks via the disk_zone.h API. You can report zones, reset write
pointers, get parameters, etc.
Sponsored by: Spectra Logic
Differential Revision: https://reviews.freebsd.org/D6147
Reviewed by: wblock (documentation)
While looking at r300073, I noticed these incorrect comments in the context
of the diff.
Reviewed by: imp, jhb
Differential Revision: https://reviews.freebsd.org/D6431
needed in later changes where we may not be able to lock the pic list lock
to perform a lookup, e.g. from within interrupt context.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
opened in O_SYNC mode, at least for UFS. This also handles
truncation, done due to the O_SYNC | O_TRUNC flags combination to
open(2), in synchronous way.
Noted by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
"iflib is a library to eliminate the need for frequently duplicated device
independent logic propagated (poorly) across many network drivers."
Participation is purely optional. The IFLIB kernel config option is
provided for drivers that want to transition between legacy and iflib
modes of operation. ixl and ixgbe driver conversions will be committed
shortly. We hope to see participation from the Broadcom and maybe
Chelsio drivers in the near future.
Submitted by: mmacy@nextbsd.org
Reviewed by: gallatin
Differential Revision: D5211
- Avoid a conditional branch on the return value of sleepq_resume_thread()
by ORing its return value into the boolean wakeup_swapper. This is
consistent with other sleepqueue functions which just pass this return
value to their caller.
- sleepq_resume_thread() unconditionally removes the thread from its queue,
so there's no need to maintain a pointer to the next element in the queue.
MFC after: 2 weeks
It has no counterpart among the other lock primitives and has been a
no-op for years. Mutex consistency checks are generally done whenver
INVARIANTS is enabled.
devd requires location and pnpinfo strings generated by bus drivers
to be formatted as a list of name=value keypairs. Non-conforming
bus drivers cause devd to mis-parse device events for these buses.
Note that this documents the desired requirements. devctl_safe_quote()
doesn't yet escape backslash characters, and devd doesn't handle escaped
characters in quoted values.
Differential Revision: https://reviews.freebsd.org/D6252
intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013.
A robust mutex is guaranteed to be cleared by the system upon either
thread or process owner termination while the mutex is held. The next
mutex locker is then notified about inconsistent mutex state and can
execute (or abandon) corrective actions.
The patch mostly consists of small changes here and there, adding
neccessary checks for the inconsistent and abandoned conditions into
existing paths. Additionally, the thread exit handler was extended to
iterate over the userspace-maintained list of owned robust mutexes,
unlocking and marking as terminated each of them.
The list of owned robust mutexes cannot be maintained atomically
synchronous with the mutex lock state (it is possible in kernel, but
is too expensive). Instead, for the duration of lock or unlock
operation, the current mutex is remembered in a special slot that is
also checked by the kernel at thread termination.
Kernel must be aware about the per-thread location of the heads of
robust mutex lists and the current active mutex slot. When a thread
touches a robust mutex for the first time, a new umtx op syscall is
issued which informs about location of lists heads.
The umtx sleep queues for PP and PI mutexes are split between
non-robust and robust.
Somewhat unrelated changes in the patch:
1. Style.
2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared
pi mutexes.
3. Removal of the userspace struct pthread_mutex m_owner field.
4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls
the lifetime of the shared mutex associated with a vnode' page.
Reviewed by: jilles (previous version, supposedly the objection was fixed)
Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects)
Tested by: pho
Sponsored by: The FreeBSD Foundation
interface with 5 methods to mirror the 5 MSI/MSI-X methods in the pcib
interface. The pcib driver will need to perform a device specific lookup
to find the MSI controller and pass this to intrng as the xref. Intrng
will finally find the controller and have it handle the requested operation.
Obtained from: ABT Systems Ltd
MFH: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5985
It seems that at present vfs_read_dirent() is used only with filesystems
that do not support cookies, so the bug never manifested itself.
MFC after: 1 week
This is a bit hackish, but the flag is currently set only for ZFS
snapshots mounted under .zfs. mountcheckdirs() can change cdir/rdir
references to a covered vnode. But for the said snapshots the covered
vnode is really ephemeral and it must never be accessed (except
for a few specific cases).
To do: consider removing mountcheckdirs() entirely
MFC after: 5 days
Currently, Application Processors (non-boot CPUs) are started by
MD code at SI_SUB_CPU, but they are kept waiting in a "pen" until
SI_SUB_SMP at which point they are released to run kernel threads.
SI_SUB_SMP is one of the last SYSINIT levels, so APs don't enter
the scheduler and start running threads until fairly late in the
boot.
This change moves SI_SUB_SMP up to just before software interrupt
threads are created allowing the APs to start executing kernel
threads much sooner (before any devices are probed). This allows
several initialization routines that need to perform initialization
on all CPUs to now perform that initialization in one step rather
than having to defer the AP initialization to a second SYSINIT run
at SI_SUB_SMP. It also permits all CPUs to be available for
handling interrupts before any devices are probed.
This last feature fixes a problem on with interrupt vector exhaustion.
Specifically, in the old model all device interrupts were routed
onto the boot CPU during boot. Later after the APs were released at
SI_SUB_SMP, interrupts were redistributed across all CPUs.
However, several drivers for multiqueue hardware allocate N interrupts
per CPU in the system. In a system with many CPUs, just a few drivers
doing this could exhaust the available pool of interrupt vectors on
the boot CPU as each driver was allocating N * mp_ncpu vectors on the
boot CPU. Now, drivers will allocate interrupts on their desired CPUs
during boot meaning that only N interrupts are allocated from the boot
CPU instead of N * mp_ncpu.
Some other bits of code can also be simplified as smp_started is
now true much earlier and will now always be true for these bits of
code. This removes the need to treat the single-CPU boot environment
as a special case.
As a transition aid, the new behavior is available under a new kernel
option (EARLY_AP_STARTUP). This will allow the option to be turned off
if need be during initial testing. I plan to enable this on x86 by
default in a followup commit in the next few days and to have all
platforms moved over before 11.0. Once the transition is complete,
the option will be removed along with the !EARLY_AP_STARTUP code.
These changes have only been tested on x86. Other platform maintainers
are encouraged to port their architectures over as well. The main
things to check for are any uses of smp_started in MD code that can be
simplified and SI_SUB_SMP SYSINITs in MD code that can be removed in
the EARLY_AP_STARTUP case (e.g. the interrupt shuffling).
PR: kern/199321
Reviewed by: markj, gnn, kib
Sponsored by: Netflix
missing /dev directory makes one end up with a completely deaf (init
without stdout/stderr) system with no hints on the console, unless
you've booted up with bootverbose.
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
and returns it referenced.
The function is similar to vfs_hash_get(9), but unlike the later,
returned vnode is not locked. This operation cannot be requested with
the vget(9) flags.
Reviewed and tested by: rmacklem
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
bus_get_cpus() returns a specified set of CPUs for a device. It accepts
an enum for the second parameter that indicates the type of cpuset to
request. Currently two valus are supported:
- LOCAL_CPUS (on x86 this returns all the CPUs in the package closest to
the device when DEVICE_NUMA is enabled)
- INTR_CPUS (like LOCAL_CPUS but only returns 1 SMT thread for each core)
For systems that do not support NUMA (or if it is not enabled in the kernel
config), LOCAL_CPUS fails with EINVAL. INTR_CPUS is mapped to 'all_cpus'
by default. The idea is that INTR_CPUS should always return a valid set.
Device drivers which want to use per-CPU interrupts should start using
INTR_CPUS instead of simply assigning interrupts to all available CPUs.
In the future we may wish to add tunables to control the policy of
INTR_CPUS (e.g. should it be local-only or global, should it ignore
SMT threads or not).
The x86 nexus driver exposes the internal set of interrupt CPUs from the
the x86 interrupt code via INTR_CPUS.
The ACPI bus driver and PCI bridge drivers use _PXM to return a suitable
LOCAL_CPUS set when _PXM exists and DEVICE_NUMA is enabled. They also and
the global INTR_CPUS set from the nexus driver with the per-domain set from
_PXM to generate a local INTR_CPUS set for child devices.
Compared to the r298933, this version uses 'struct _cpuset' in
<sys/bus.h> instead of 'cpuset_t' to avoid requiring <sys/param.h>
(<sys/_cpuset.h> still requires <sys/param.h> for MAXCPU even though
<sys/_bitset.h> does not after recent changes).
struct associated with some type defined in enum intr_map_data_type
must have struct intr_map_data on the top of its own definition now.
When such structs are used, correct type and size must be filled in.
There are three such structs defined in sys/intr.h now. Their
definitions should be moved to corresponding headers by follow-up
commits.
While this change was propagated to all INTRNG like PICs,
pic_map_intr() method implementations were corrected on some places.
For this specific method, it's ensured by a caller that the 'data'
argument passed to this method is never NULL. Also, the return error
values were standardized there.
Two new functions are provided, bit_ffs_at() and bit_ffc_at(), which allow
for efficient searching of set or cleared bits starting from any bit offset
within the bit string.
Performance is improved by operating on longs instead of bytes and using
ffsl() for searches within a long. ffsl() is a compiler builtin in both
clang and gcc for most architectures, converting what was a brute force
while loop search into a couple of instructions.
All of the bitstring(3) API continues to be contained in the header file.
Some of the functions are large enough that perhaps they should be uninlined
and moved to a library, but that is beyond the scope of this commit.
sys/sys/bitstring.h:
Convert the majority of the existing bit string implementation from
macros to inline functions.
Properly protect the implementation from inadvertant macro expansion
when included in a user's program by prefixing all private
macros/functions and local variables with '_'.
Add bit_ffs_at() and bit_ffc_at(). Implement bit_ffs() and
bit_ffc() in terms of their "at" counterparts.
Provide a kernel implementation of bit_alloc(), making the full API
usable in the kernel.
Improve code documenation.
share/man/man3/bitstring.3:
Add pre-exisiting API bit_ffc() to the synopsis.
Document new APIs.
Document the initialization state of the bit strings
allocated/declared by bit_alloc() and bit_decl().
Correct documentation for bitstr_size(). The original code comments
indicate the size is in bytes, not "elements of bitstr_t". The new
implementation follows this lead. Only hastd assumed "elements"
rather than bytes and it has been corrected.
etc/mtree/BSD.tests.dist:
tests/sys/Makefile:
tests/sys/sys/Makefile:
tests/sys/sys/bitstring.c:
Add tests for all existing and new functionality.
include/bitstring.h
Include all headers needed by sys/bitstring.h
lib/libbluetooth/bluetooth.h:
usr.sbin/bluetooth/hccontrol/le.c:
Include bitstring.h instead of sys/bitstring.h.
sbin/hastd/activemap.c:
Correct usage of bitstr_size().
sys/dev/xen/blkback/blkback.c
Use new bit_alloc.
sys/kern/subr_unit.c:
Remove hard-coded assumption that sizeof(bitstr_t) is 1. Get rid of
unrb.busy, which caches the number of bits set in unrb.map. When
INVARIANTS are disabled, nothing needs to know that information.
callapse_unr can be adapted to use bit_ffs and bit_ffc instead.
Eliminating unrb.busy saves memory, simplifies the code, and
provides a slight speedup when INVARIANTS are disabled.
sys/net/flowtable.c:
Use the new kernel implementation of bit-alloc, instead of hacking
the old libc-dependent macro.
sys/sys/param.h
Update __FreeBSD_version to indicate availability of new API
Submitted by: gibbs, asomers
Reviewed by: gibbs, ngie
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D6004
The current code in clock_register checks if the newly added clock has a
resolution value higher than the current one in order to make it the
default, which is wrong. Clocks with a lower resolution value should be
better than ones with a higher resolution value, in fact with the current
code FreeBSD is always selecting the worse clock.
Reviewed by: kib jhb jkim
Sponsored by: Citrix Systems R&D
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D6185
While there, order EVFILT_VNODE notes descriptions alphabetically.
Based on submission, and tested by: Vladimir Kondratyev <wulf@cicgroup.ru>
MFC after: 2 weeks
It will be used for the upcoming LRO hash table initialization.
And probably will be useful in other cases, when M_WAITOK can't
be used.
Reviewed by: jhb, kib
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6138
bus_get_cpus() returns a specified set of CPUs for a device. It accepts
an enum for the second parameter that indicates the type of cpuset to
request. Currently two valus are supported:
- LOCAL_CPUS (on x86 this returns all the CPUs in the package closest to
the device when DEVICE_NUMA is enabled)
- INTR_CPUS (like LOCAL_CPUS but only returns 1 SMT thread for each core)
For systems that do not support NUMA (or if it is not enabled in the kernel
config), LOCAL_CPUS fails with EINVAL. INTR_CPUS is mapped to 'all_cpus'
by default. The idea is that INTR_CPUS should always return a valid set.
Device drivers which want to use per-CPU interrupts should start using
INTR_CPUS instead of simply assigning interrupts to all available CPUs.
In the future we may wish to add tunables to control the policy of
INTR_CPUS (e.g. should it be local-only or global, should it ignore
SMT threads or not).
The x86 nexus driver exposes the internal set of interrupt CPUs from the
the x86 interrupt code via INTR_CPUS.
The ACPI bus driver and PCI bridge drivers use _PXM to return a suitable
LOCAL_CPUS set when _PXM exists and DEVICE_NUMA is enabled. They also and
the global INTR_CPUS set from the nexus driver with the per-domain set from
_PXM to generate a local INTR_CPUS set for child devices.
Reviewed by: wblock (manpage)
Differential Revision: https://reviews.freebsd.org/D5519
the monitored directory as the result of rename(2) operation. The
renames staying in the directory are not reported.
Submitted by: Vladimir Kondratyev <wulf@cicgroup.ru>
MFC after: 2 weeks
rename removing or adding subdirectory entry.
Discussed with and tested by: Vladimir Kondratyev <wulf@cicgroup.ru>
NetBSD PR: 48958 (http://gnats.netbsd.org/48958)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Build and install the subr_unit test program originally written by phk, and
run it with the other ATF tests.
tests/sys/kern/Makefile
* Build and install the subr_unit test as a plain test
sys/kern/subr_unit.c
* Reduce the default number of repetitions from 100 to 1, and add a
command-line parser to override it.
* Don't be so noisy by default
* Fix an include problem for the test build
Reviewed by: ngie
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D6038
Add new function gpio_alloc_intr_resource(), which allows an allocation
of interrupt resource associated to given gpio pin. It also allows to
specify interrupt configuration.
Note: This functionality is dependent on INTRNG, and must be
implemented in each GPIO controller.
'devctl delete' can be used to delete a device that is no longer present.
As an anti-foot-shooting measure, 'delete' will not delete a device
unless it's parent bus says it is no longer present. This can be
overridden by passing the force ('-f') flag.
Note that this command should be used with care. If a device is deleted
that is actually present it can't be resurrected unless the parent bus
device's driver supports rescans.
Differential Revision: https://reviews.freebsd.org/D6019
The BUS_RESCAN() method rescans a single bus device checking for devices
that have been added or removed from the bus. A new 'rescan' command is
added to devctl(8) to trigger a rescan.
Differential Revision: https://reviews.freebsd.org/D6016
put it off into the pr_task. This is similar to prison_free, and in fact
uses the same task even though they do something slightly different.
This resolves a LOR between the process lock and allprison_lock, which
came about in r298565.
PR: 48471
The facility_initialized and facility arrays are the same size and were
intended to be indexed the same. I believe this mismatch was just a
typo/braino in r208731.
Reported by: Coverity
CID: 1017430
Sponsored by: EMC / Isilon Storage Division
An mbpool is allocated with a contiguous array of mbpages. Freeing an
individual mbpage has never been valid. Don't do it.
This bug has been present since this code was introduced in r117624 (2003).
Reported by: Coverity
CID: 1009687
Sponsored by: EMC / Isilon Storage Division
This is a minor follow-up to r297422, prompted by a Coverity warning. (It's
not a real defect, just a code smell.) OSD slot array reservations are an
array of pointers (void **) but were cast to void* and back unnecessarily.
Keep the correct type from reservation to use.
osd.9 is updated to match, along with a few trivial igor fixes.
Reported by: Coverity
CID: 1353811
Sponsored by: EMC / Isilon Storage Division
sysvmsg, sysvsem, and sysvshm, with the following bahavior:
inherit: allow full access to the IPC primitives. This is the same as
the current setup with allow.sysvipc is on. Jails and the base system
can see (and moduly) each other's objects, which is generally considered
a bad thing (though may be useful in some circumstances).
disable: all no access, same as the current setup with allow.sysvipc off.
new: A jail may see use the IPC objects that it has created. It also
gets its own IPC key namespace, so different jails may have their own
objects using the same key value. The parent jail (or base system) can
see the jail's IPC objects, but not its keys.
PR: 48471
Submitted by: based on work by kikuchan98@gmail.com
MFC after: 5 days
until after the jail is found or created. This requires unlocking the
jail for the call and re-locking it afterward, but that works because
nothing in the jail has been changed yet, and other processes won't
change the important fields as long as allprison_lock remains held.
Keep better track of name vs namelc in kern_jail_set. Name should
always be the hierarchical name (relative to the caller), and namelc
the last component.
PR: 48471
MFC after: 5 days
removed from the user perspective, i.e. when the last pr_uref goes away,
even though the jail mail still exist in the dying state. It will also
be called if either PR_METHOD_CREATE or PR_METHOD_SET fail.
PR: 48471
MFC after: 5 days
a jail that might be seen mid-removal. It hasn't been doing the right
thing since at least the ability to resurrect dying jails, and such
resurrection also makes it unnecessary.
rounddown2 tends to produce longer lines than the original code
and when the code has a high indentation level it was not really
advantageous to do the replacement.
This tries to strike a balance between readability using the macros
and flexibility of having the expressions, so not everything is
converted.
already required both of them, so having a separate rctl_lock didn't
buy us anything.
Reviewed by: mjg@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5914
Ordinarily, rctl_write_outbuf frees 'sb'. However, if we are in low memory
conditions we skip past the rctl_write_outbuf. In that case, free 'sb'.
Reported by: Coverity
CID: 1338539
Sponsored by: EMC / Isilon Storage Division
Move it to the struct td_sched for 4BSD, removing always present
field, otherwise unused for ULE.
New scheduler method sched_estcpu() returns the estimation for
kinfo_proc consumption. As before, it always returns 0 for ULE.
Remove sched_tick() scheduler method, unused both by 4BSD and ULE.
Update locking comment for the 4BSD struct td_sched, copying it from
the same comment for ULE.
Spell MAXPRI as PRI_MAX_TIMESHARE in the 4BSD comment.
Based on some notes from, and reviewed by: bde
Sponsored by: The FreeBSD Foundation
(And 4Kn minidump support, but only for amd64.)
Make sure all I/O to the dump device is of the native sector size. To
that end, we keep a native sector sized buffer associated with dump
devices (di->blockbuf) and use it to pad smaller objects as needed (e.g.
kerneldumpheader).
Add dump_write_pad() as a convenience API to dump smaller objects with
zero padding. (Rather than pull in NPM leftpad, we wrote our own.)
Savecore(1) has been updated to deal with these dumps. The format for
512-byte sector dumps should remain backwards compatible.
Minidumps for other architectures are left as an exercise for the
reader.
PR: 194279
Submitted by: ambrisko@
Reviewed by: cem (earlier version), rpokala
Tested by: rpokala (4Kn/512 except 512 fulldump), cem (512 fulldump)
Relnotes: yes
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D5848
name to the object's "path". While the objects don't have real path
names, it's a filesystem-like namespace, which allows jails to be
kept to their own space, but still allows the system / jail parent to
access a jail's IPC.
PR: 208082
There are some other potential problems related to overflowing racct
counters; I'll revisit those later.
Submitted by: Pieter de Goeje (earlier version)
Reviewed by: emaste@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
This just walks the global list of devices looking for one with the
requested name. The one use case outside of devctl2's implementation
is for DDB commands that wish to lookup devices by name.
VM_NUMA_ALLOC is used to enable use of domain-aware memory allocation in
the virtual memory system. DEVICE_NUMA is used to enable affinity
reporting for devices such as bus_get_domain().
MAXMEMDOM must still be set to a value greater than for any NUMA support
to be effective. Note that 'cpuset -gd' always works if MAXMEMDOM is
enabled and the system supports NUMA.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D5782
While the pointer might not be too helpful, the malloc type might at
least give a good hint about which hashtbl we are talking.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Reviewed by: gnn, emaste
Differential Revision: https://reviews.freebsd.org/D5802
registered into global interrupt table. Thus, they must be filtered out
like per-cpu interrupts. Fortunately, it does not influence anything
on interrupt controllers which already use INTRNG.
for limiting disk (actually filesystem) IO.
Note that in some cases these limits are not quite precise. It's ok,
as long as it's within some reasonable bounds.
Testing - and review of the code, in particular the VFS and VM parts - is
very welcome.
MFC after: 1 month
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5080
Previously, the code determined a topology of processing units
(hardware threads, cores, packages) and then deduced a cache topology
using certain assumptions. The new code builds a topology that
includes both processing units and caches using the information
provided by the hardware.
At the moment, the discovered full topology is used only to creeate
a scheduling topology for SCHED_ULE.
There is no KPI for other kernel uses.
Summary:
- based on APIC ID derivation rules for Intel and AMD CPUs
- can handle non-uniform topologies
- requires homogeneous APIC ID assignment (same bit widths for ID
components)
- topology for dual-node AMD CPUs may not be optimal
- topology for latest AMD CPU models may not be optimal as the code is
several years old
- supports only thread/package/core/cache nodes
Todo:
- AMD dual-node processors
- latest AMD processors
- NUMA nodes
- checking for homogeneity of the APIC ID assignment across packages
- more flexible cache placement within topology
- expose topology to userland, e.g., via sysctl nodes
Long term todo:
- KPI for CPU sharing and affinity with respect to various resources
(e.g., two logical processors may share the same FPU, etc)
Reviewed by: mav
Tested by: mav
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D2728
universal.
(1) New struct intr_map_data is defined as a container for arbitrary
description of an interrupt used by a device. Typically, an interrupt
number and configuration relevant to an interrupt controller is encoded
in such description. However, any additional information may be encoded
too like a set of cpus on which an interrupt should be enabled or vendor
specific data needed for setup of an interrupt in controller. The struct
intr_map_data itself is meant to be opaque for INTRNG.
(2) An intr_map_irq() function is created which takes an interrupt
controller identification and struct intr_map_data as arguments and
returns global interrupt number which identifies an interrupt.
(3) A set of functions to be used by bus drivers is created as well as
a corresponding set of methods for interrupt controller drivers. These
sets take both struct resource and struct intr_map_data as one of the
arguments. There is a goal to keep struct intr_map_data in struct
resource, however, this way a final solution is not limited to that.
(4) Other small changes are done to reflect new situation.
This is only first step aiming to create stable interface for interrupt
controller drivers. Thus, some temporary solution is taken. Interrupt
descriptions for devices are stored in INTRNG and two specific mapping
function are created to be temporary used by bus drivers. That's why
the struct intr_map_data is not opaque for INTRNG now. This temporary
solution will be replaced by final one in next step.
Differential Revision: https://reviews.freebsd.org/D5730
Previously, freebsd32 binaries could submit read/write requests with lengths
greater than INT_MAX that a native kernel would have rejected.
Reviewed by: kib
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D5788
not getting a proper bounds check.
Thanks to CTurt for pointing at this with a big red blinking neon sign.
PR: 206761
Submitted by: sson
Reviewed by: cturt@hardenedbsd.org
MFC after: 3 days
Previously, calls to *sleep() and cv_*wait*() immediately returned during
early boot. Instead, permit threads that request a sleep without a
timeout to sleep as wakeup() works during early boot. Sleeps with
timeouts are harder to emulate without working timers, so just punt and
panic explicitly if any thread tries to use those before timers are
working. Any threads that depend on timeouts should either wait until
SI_SUB_KICK_SCHEDULER to start or they should use DELAY() until timers
are available.
Until APs are started earlier this should be a no-op as other kthreads
shouldn't get a chance to start running until after timers are working
regardless of when they were created.
Reviewed by: kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D5724
- Move some blocks around to reduce the number of 'if (unmap)' checks.
- Use 'pbuf == NULL' instead of 'unmap'.
- Use nitems.
- Pull an assignment out of an if expression.
Reviewed by: kib
Sponsored by: Chelsio Communications
data (headers). Historically the size of the headers was not checked
against the socket buffer space. Application could easily overcommit the
socket buffer space.
With the new sendfile (r293439) the problem remained, but a KASSERT was
inserted that checked that amount of data written to the socket matches
its space. In case when size of headers is bigger that socket space,
KASSERT fires. Without INVARIANTS the new sendfile won't panic, but
would report incorrect amount of bytes sent.
o With this change, the headers copyin is moved down into the cycle, after
the sbspace() check. The uio size is trimmed by socket space there,
which fixes the overcommit problem and its consequences.
o The compatibility handling for FreeBSD 4 sendfile headers API is pushed
up the stack to syscall wrappers. This required a copy and paste of the
code, but in turn this allowed to remove extra stack carried parameter
from fo_sendfile_t, and embrace entire compat code into #ifdef. If in
future we got more fo_sendfile_t function, the copy and paste level would
even reduce.
Reviewed by: emax, gallatin, Maxim Dounin <mdounin mdounin.ru>
Tested by: Vitalij Satanivskij <satan ukr.net>
Sponsored by: Netflix
m_unshare passes on the source mbuf's flags as-is to m_getcl and this
results in a leak if the flags include M_NOFREE. The fix is to clear
the bits not listed in M_COPYALL before calling m_getcl. M_RDONLY
should probably be filtered out too but that's outside the scope of this
fix.
Add assertions in the zone_mbuf and zone_pack ctors to catch similar
bugs.
Update netmap_get_mbuf to not pass M_NOFREE to m_getcl. It's not clear
what the original code was trying to do but it's likely incorrect.
Updated code is no different functionally but it avoids the newly added
assertions.
Reviewed by: gnn@
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D5698
controller IPI provider.
New struct intr_ipi is defined which keeps all info about an IPI:
its name, counter, send and dispatch methods. Generic intr_ipi_setup(),
intr_ipi_send() and intr_ipi_dispatch() functions are implemented.
An IPI provider must implement two functions:
(1) an intr_ipi_send_t function which is able to send an IPI,
(2) a setup function which initializes itself for an IPI and
calls intr_ipi_setup() with appropriate arguments.
Differential Revision: https://reviews.freebsd.org/D5700
No functional change.
struct radix_node_head's first element is rh so this was already
referring to the same address. It was likely an unintended
s/rnh/&rnh->rh/ change from r294706 as all other rnh_walktree() callers
pass the expected struct radix_node_head * rather than obscurely passing
the address of their first element.
Sponsored by: EMC / Isilon Storage Division
Replace free(M_RTABLE) with rn_detachhead() to match rn_inithead().
This would trigger when reloading NFS exports and was similar to
problems with pf reload [1].
PR: 194078 [1]
Sponsored by: EMC / Isilon Storage Division
This restores the pre-r290196 behaviour, eliminating the need to manually
press '.' a couple of times to get USB to finish probing.
Note that there's still something wrong with the console (character
echoing doesn't quite work), and there's also a reported problem with
BHyVe, but those two don't seem related to the problem above.
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
The mbuf provider is made up of a set of Statically Defined Tracepoints
which help us look into mbufs as they are allocated and freed. This can be
used to inspect the buffers or for a simplified mbuf leak detector.
New tracepoints are:
mbuf:::m-init
mbuf:::m-gethdr
mbuf:::m-get
mbuf:::m-getcl
mbuf:::m-clget
mbuf:::m-cljget
mbuf:::m-cljset
mbuf:::m-free
mbuf:::m-freem
There is also a translator for mbufs which gives some visibility into the structure,
see mbuf.d for more details.
Reviewed by: bz, markj
MFC after: 2 weeks
Sponsored by: Rubicon Communications (Netgate)
Differential Revision: https://reviews.freebsd.org/D5682
First, update the return types of aio_return() and aio_waitcomplete() to
ssize_t.
POSIX requires aio_return() to return a ssize_t so that it can represent
all return values from read() and write(). aio_waitcomplete() should use
ssize_t for the same reason.
aio_return() has used ssize_t in <aio.h> since r31620 but the manpage and
system call entry were not updated. aio_waitcomplete() has always
returned int.
Note that this does not require new system call stubs as this is
effectively only an API change in how the compiler interprets the return
value.
Second, allow aio_nbytes values up to IOSIZE_MAX instead of just INT_MAX.
aio_read/write should now honor the same length limits as normal read/write.
Third, use longs instead of ints in the aio_return() and aio_waitcomplete()
system call functions so that the 64-bit size_t in the in-kernel aiocb
isn't truncated to 32-bits before being copied out to userland or
being returned.
Finally, a simple test has been added to verify the bounds checking on the
maximum read size from a file.
For the !unmap case it may happen that pbuf gets called unreferenced
when vm_fault_quick_hold_pages() fails.
Initialize it so it doesn't cause trouble.
CID: 1352776
Reviewed by: jhb
MFC after: 1 week
On some architectures, u_long isn't large enough for resource definitions.
Particularly, powerpc and arm allow 36-bit (or larger) physical addresses, but
type `long' is only 32-bit. This extends rman's resources to uintmax_t. With
this change, any resource can feasibly be placed anywhere in physical memory
(within the constraints of the driver).
Why uintmax_t and not something machine dependent, or uint64_t? Though it's
possible for uintmax_t to grow, it's highly unlikely it will become 128-bit on
32-bit architectures. 64-bit architectures should have plenty of RAM to absorb
the increase on resource sizes if and when this occurs, and the number of
resources on memory-constrained systems should be sufficiently small as to not
pose a drastic overhead. That being said, uintmax_t was chosen for source
clarity. If it's specified as uint64_t, all printf()-like calls would either
need casts to uintmax_t, or be littered with PRI*64 macros. Casts to uintmax_t
aren't horrible, but it would also bake into the API for
resource_list_print_type() either a hidden assumption that entries get cast to
uintmax_t for printing, or these calls would need the PRI*64 macros. Since
source code is meant to be read more often than written, I chose the clearest
path of simply using uintmax_t.
Tested on a PowerPC p5020-based board, which places all device resources in
0xfxxxxxxxx, and has 8GB RAM.
Regression tested on qemu-system-i386
Regression tested on qemu-system-mips (malta profile)
Tested PAE and devinfo on virtualbox (live CD)
Special thanks to bz for his testing on ARM.
Reviewed By: bz, jhb (previous)
Relnotes: Yes
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D4544
This is several year's worth of fail point upgrades done at EMC Isilon. They
are interdependent enough that it makes sense to put a single diff up for them.
Primarily, we added:
- Changing all mainline execution paths to be lockless, which lets us use fail
points in more sleep-sensitive areas, and allows more parallel execution
- A number of additional commands, including 'pause' that lets us do some
interesting deterministic repros of race conditions
- The ability to dump the stacks of all threads sleeping on a fail point
- A number of other API changes to allow marking up the fail point's context in
the code, and firing callbacks before and after execution
- A man page update
Submitted by: Matthew Bryan <matthew.bryan@isilon.com>
Reviewed by: cem (earlier version), jhb, kib, pho
With feedback from: bdrewery
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D5427
In timer2sbintime(), calculate the second and fractional second portions of
the sbintime separately. When calculating the the fractional second portion,
use a 64bit multiply to prevent excess truncation. This avoids the ~7% error
in the original conversion for ns, and smaller errors of the same type for us
and ms.
PR: 198139
Reviewed by: jhb
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D5397
The base system libc is only used to run binaries built on FreeBSD 7.0 and
later. It does not need to include system call wrappers for system calls
only used by FreeBSD binaries built on versions older than 7.0. This was
already true for "COMPAT" system calls, but now wrappers for system calls
used on FreeBSD 4 and 6 are excluded as well.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D5597
192.168.1.1, with share "share". This commit fixes a problem
where "mkdir /net/192.168.1.1/share/meh" would return spurious
error instead of creating the directory if the target filesystem
wasn't mounted yet; subsequent attempts would work correctly.
The failure scenario is kind of complicated to explain, but it all
boils down to calling VOP_MKDIR() for the target filesystem (NFS)
with wrong dvp - the autofs vnode instead of the filesystem root
mounted over it.
Reviewed by: kib@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5442
- Mark AIO system calls as STD and remove the helpers to dynamically
register them.
- Use COMPAT6 for the old system calls with the older sigevent instead of
an 'o' prefix.
- Simplify the POSIX configuration to note that AIO is always available.
- Handle AIO in the default VOP_PATHCONF instead of special casing it in
the pathconf() system call. fpathconf() is still hackish.
- Remove freebsd32_aio_cancel() as it just called the native one directly.
Reviewed by: kib
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D5589
files format into printfs and errors to caller. Some leaks of
resources are there, but the same leaks are present in other error
pathes. With the change, the kernel at least boots even when module
with unexpected or corrupted ELF structure is preloaded.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
as SHT_PROGBITS. This is needed after the clang 3.8 import, which
generates that type for .eh_frame section, which had SHT_PROGBITS type
before.
Reported by: Nikolai Lifanov <lifanov@mail.lifanov.com>
PR: 207729
Tested by: dim (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Summary:
The idea behind this is '~0ul' is well-defined, and casting to uintmax_t, on a
32-bit platform, will leave the upper 32 bits as 0. The maximum range of a
resource is 0xFFF.... (all bits of the full type set). By dropping the 'ul'
suffix, C type promotion rules apply, and the sign extension of ~0 on 32 bit
platforms gets it to a type-independent 'unsigned max'.
Reviewed By: cem
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5255
but next invocation is cancelled while migrating,
sleepq_check_timeout() needs to be informed that the callout is
stopped. Otherwise the thread switches off CPU and never become
runnable, since running callout could have already raced with us,
while the migrating and cancelled callout could be one which is
expected to set TDP_TIMOFAIL flag for us. This contradicts with the
expected behaviour of callout_stop() for other callers, which
e.g. decrement references from the callout callbacks.
Add a new flag CS_MIGRBLOCK requesting report of the situation as
'successfully stopped'.
Reviewed by: jhb (previous version)
Tested by: cognet, pho
PR: 200992
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D5221
EXT_MOD_TYPE, EXT_DISPOSABLE types we should first execute the free
callback, then free the mbuf, otherwise we will derefernce memory that
was just freed.
Reported and tested: jhibbits
improve cancellation robustness.
Introduce a new file operation, fo_aio_queue, which is responsible for
queueing and completing an asynchronous I/O request for a given file.
The AIO subystem now exports library of routines to manipulate AIO
requests as well as the ability to run a handler function in the
"default" pool of AIO daemons to service a request.
A default implementation for file types which do not include an
fo_aio_queue method queues requests to the "default" pool invoking the
fo_read or fo_write methods as before.
The AIO subsystem permits file types to install a private "cancel"
routine when a request is queued to permit safe dequeueing and cleanup
of cancelled requests.
Sockets now use their own pool of AIO daemons and service per-socket
requests in FIFO order. Socket requests will not block indefinitely
permitting timely cancellation of all requests.
Due to the now-tight coupling of the AIO subsystem with file types,
the AIO subsystem is now a standard part of all kernels. The VFS_AIO
kernel option and aio.ko module are gone.
Many file types may block indefinitely in their fo_read or fo_write
callbacks resulting in a hung AIO daemon. This can result in hung
user processes (when processes attempt to cancel all outstanding
requests during exit) or a hung system. To protect against this, AIO
requests are only permitted for known "safe" files by default. AIO
requests for all file types can be enabled by setting the new
vfs.aio.enable_usafe sysctl to a non-zero value. The AIO tests have
been updated to skip operations on unsafe file types if the sysctl is
zero.
Currently, AIO requests on sockets and raw disks are considered safe
and are enabled by default. aio_mlock() is also enabled by default.
Reviewed by: cem, jilles
Discussed with: kib (earlier version)
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D5289
taskqueue_enqueue() was changed to support both fast and non-fast
taskqueues 10 years ago in r154167. It has been a compat shim ever
since. It's time for the compat shim to go.
Submitted by: Howard Su <howard0su@gmail.com>
Reviewed by: sephe
Differential Revision: https://reviews.freebsd.org/D5131
Note that isrc_arg member of struct intr_irqsrc is used only for
INTR_SOLO and IPI filter. This should be remembered if IPI filters
and their arguments will be stored on another place.
This option could be unusable very soon, if interrupt controllers
implementations will not be implemented considering it.
The m_ext.ext_cnt pointer becomes a union. It can now hold the refcount
value itself. To tell that m_ext.ext_flags flag EXT_FLAG_EMBREF is used.
The first mbuf to attach a cluster stores the refcount. The further mbufs
to reference the cluster point at refcount in the first mbuf. The first
mbuf is freed only when the last reference is freed.
The benefit over refcounts stored in separate slabs is that now refcounts
of different, unrelated mbufs do not share a cache line.
For EXT_EXTREF mbufs the zone_ext_refcnt is no longer needed, and m_extadd()
becomes void, making widely used M_EXTADD macro safe.
For EXT_SFBUF mbufs the sf_ext_ref() is removed, which was an optimization
exactly against the cache aliasing problem with regular refcounting.
Discussed with: rrs, rwatson, gnn, hiren, sbruno, np
Reviewed by: rrs
Differential Revision: https://reviews.freebsd.org/D5396
Sponsored by: Netflix
breaking the ABI. Special value is stored in the lock pointer to
indicate shared lock, and offline page in the shared memory is
allocated to store the actual lock.
Reviewed by: vangyzen (previous version)
Discussed with: deischen, emaste, jhb, rwatson,
Martin Simmons <martin@lispworks.com>
Tested by: pho
Sponsored by: The FreeBSD Foundation
the interrupt framework is also going to be used by another (MIPS)
architecture. IPI implementations may vary much across different
architectures.
An IPI implementation should still define INTR_IPI_COUNT and use
intr_ipi_setup_counters() to setup IPI counters which are inside of
intrcnt[] and intrnames[] arrays. Those are used for sysctl and ddb.
Then, intr_ipi_increment_count() should be used to increment obtained
counter.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D5459
- Set td_errno so that ktrace and dtrace can obtain the syscall error
number in the usual way.
- Pass negative error numbers directly to the syscall layer, as they're
not intended to be returned to userland.
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D5425
While making CloudABI work well on Linux, I discovered that I had a
FreeBSD-ism in one of my unit tests. The test did the following:
- Create UNIX socket 1, bind it, make it listen.
- Create UNIX socket 2, connect it to UNIX socket 1.
- Close UNIX socket 1.
- Obtain SO_ERROR from socket 2.
On FreeBSD this returns ECONNABORTED, while on Linux it returns
ECONNRESET. I dug through some of the relevant specifications[1] and it
looks like Linux is all right here. ECONNABORTED should only be returned
when the local connection (socket 2) is aborted; not the peer (socket 1).
It is of course slightly misleading: the function in which we set this
error is called uipc_abort(), but keep in mind that we're aborting the
peer, thus resetting the local socket.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/functions/connect.html
Reviewed by: cem
Sponsored by: Nuxi, the Netherlands
Differential Revision: https://reviews.freebsd.org/D5419
the virtvnodes calculation. Include the size of fs-specific v_data as
the nfs nclnode inline, the NFS nclnode is bigger than either ZFS
znode or UFS inode. Include the size of namecache_ts and short cache
path element, multiplied by the name cache population factor, again
inline.
Inline defines are used to avoid pollution of the vnode.h with the
subsystem-private objects. Non-significant unsynchronized changes of
the definitions are fine, we do not care about that precision, and
e.g. ZFS consumes much malloced memory per vnode for reasons
unaccounted in the formula.
Lower the partition of kmem dedicated to vnodes, from 1/7 to 1/10.
The measures reduce vnode cache pressure on kmem and bring the vnode
cache memory use below some apparent thresholds that were exceeded by
r291244 due to more robust vnode reuse.
Reported and tested by: marius (i386, previous version)
Reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
This simplifies checking for default resource range for bus_alloc_resource(),
and improves readability.
This is part of, and related to, the migration of rman_res_t from u_long to
uintmax_t.
Discussed with: jhb
Suggested by: marcel
r274560 modified kqueue_register() to only test the event condition if the
corresponding knote is not disabled. However, this check takes place before
the EV_ENABLE flag is used to clear the KN_DISABLED flag on the knote, so
enabling a previously-disabled kevent would not result in a notification for
a triggered event. This change fixes the problem by testing for EV_ENABLED
before possibly checking the event condition.
This change also updates a kqueue regression test to exercise this case.
PR: 206368
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D5307
Provide bus_get_bus_tag() for sparc64, powerpc, arm, arm64 and mips
nexus and its children in order to return a platform specific default tag.
This is required to ensure generic correctness of the bus_space tag.
It is especially needed for arches where child bus tag does not match
the parent bus tag. This solves the problem with ppc architecture
where the PCI bus tag differs from parent bus tag which is big-endian.
This commit is a part of the following patch:
https://reviews.freebsd.org/D4879
Submitted by: Marcin Mazurek <mma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Annapurna Labs
Reviewed by: jhibbits, mmel
Differential Revision: https://reviews.freebsd.org/D4879
numbers range.
This effectively skips indirect and extdata blocks on the buffer
queue. Since their logical block numbers are negative, bnoreuselist()
could loop infinitely.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
for all struct bio you get back from g_{new,alloc}_bio. Temporary
bios that you create on the stack or elsewhere should use this before
first use of the bio, and between uses of the bio. At the moment, it
is nothing more than a wrapper around bzero, but that may change in
the future. The wrapper also removes one place where we encode the
size of struct bio in the KBI.
This patch allows the newly imported INTRNG code to be built without necessarily
having FDT support in the kernel. This may be useful for some MIPS platforms
that wish to move to INTRNG, but not to FDT at the same time.
Basically all the code is already within ifdef's where FDT is concerned,
it's just the headers that aren't.
Submitted by: Stanislav Galabov <sgalabov@gmail.com>
Differential Revision: https://reviews.freebsd.org/D5249
mbuf(9) manipulation functions into uipc_mbuf.c. This looks like
the initial intent, but had diffused in the last decade.
o Gather all declarations in mbuf.h in one place and sort them.
o Uninline m_clget() and m_cljget().
There are no functional changes in this patch.
The patch comes from a larger version, where all mbuf(9) allocation was
uninlined, which allowed to make mbuf(9) UMA zones private to kern_mbuf.c.
The performance impact of the total uninlining is still unclear, so we
are holding on now with larger version.
Together with: melifaro, olivier
Kernel threads (and processes) are supposed to call kthread_exit() (or
kproc_exit()) to terminate. However, the kernel includes a fallback in
fork_exit() to force a kthread exit if a kernel thread's "main" routine
returns. This fallback was added back when the kernel only had processes
and was not updated to call kthread_exit() instead of kproc_exit() when
threads were added to the kernel.
This mistake was particular exciting when the errant thread belonged to
proc0. Due to the missing P_KTHREAD flag the fallback did not kick in
and instead tried to return to userland via whatever garbage was in the
trapframe. With P_KTHREAD set it tried to terminate proc0 resulting in
other amusements.
PR: 204999
MFC after: 1 week
All other kernel processes have this flag set and all threads in proc0
(including thread0) have the similar TDP_KTHREAD flag set.
PR: 204999
Submitted by: Oliver Pinter @ HardenedBSD
Reviewed by: kib
MFC after: 1 week
disable compilation of the code which made it possible to call
stop_all_proc() from usermode at all.
Move the comment to the preamble of stop_all_proc() and reword it to
give overview of the function intent.
proc0 has P_HADTHREADS flag set due to kthread_add(), but no
P_KTHREAD, which triggered the assert, which does not serve a purpose
now.
Reported by: Oliver Pinter
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Although POSIX literally permits failing with [EINVAL] if IPC_CREAT and
IPC_EXCL were both passed, the semaphore set already exists and has fewer
semaphores than nsems, this does not allow an application to retry safely:
if the [EINVAL] is actually because of the semmsl limit, an infinite loop
would result.
PR: 206927
Typically <foo>list is used for a structure that holds a list head in
FreeBSD, not for members of a list. As such, rename 'struct aiocblist'
to 'struct kaiocb' (the kernel version of 'struct aiocb').
While here, use more consistent variable names for AIO control blocks:
- Use 'job' instead of 'aiocbe', 'cb', 'cbe', or 'iocb' for kernel job
objects.
- Use 'jobn' instead of 'cbn' for use with TAILQ_FOREACH_SAFE().
- Use 'sjob' and 'sjobn' instead of 'scb' and 'scbn' for fsync jobs.
- Use 'ujob' instead of 'aiocbp', 'job', 'uaiocb', or 'uuaiocb' to hold
a user pointer to a 'struct aiocb'.
- Use 'ujobp' instead of 'aiocbp' for a user pointer to a 'struct aiocb *'.
Reviewed by: kib
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D5125
with interpreter name exactly matching one wanted by the binary. If
no such brand exists, return first brand which accepted the binary by
note.
The change fixes a regression after r292749, where e.g. our two ia32
compat brands, ia32_brand_info and ia32_brand_oinfo, only differ by
the interpeter path and binary matches to a brand by linkage order.
Then old binaries which require /usr/libexec/ld-elf.so.1 but matched
against ia32_brand_info with interp_path /libexec/ld-elf.so.1, were
considered requiring non-standard interpreter name, and magic to force
ld-elf32.so.1 did not happen.
Note that it might make sense to apply the same selection of brands
for other matching criteria, SCO EI_OSABI and 3.x string.
Reported and tested by: dwmalone
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
export_args on mount update, bzero() is consistent with
vfs_oexport_conv().
Make the code structure more explicit by using switch.
Return EINVAL if export option layout (deduced from size) is unknown.
Based on the submission by: bde
Sponsored by: The FreeBSD Foundation
fork1 required its callers to pass a pointer to struct proc * which would
be set to the new process (if any). procdesc and racct manipulation also
used said pointer.
However, the process could have exited prior to do_fork return and be
automatically reaped, thus making this a use-after-free.
Fix the problem by letting callers indicate whether they want the pid or
the struct proc, return the process in stopped state for the latter case.
Reviewed by: kib
