fusefs will now read ahead at most one cache block at a time (usually 64
KB). Clustered reads are still TODO. Individual file systems may disable
read ahead by setting fuse_init_out.max_readahead=0 during initialization.
Sponsored by: The FreeBSD Foundation
Our fusefs(5) module supports three cache modes: uncached, write-through,
and write-back. However, the write-through mode (which is the default) has
never actually worked as its name suggests. Rather, it's always been more
like "write-around". It wrote directly, bypassing the cache. The cache
would only be populated by a subsequent read of the same data.
This commit fixes that problem. Now the write-through mode works as one
would expect: write(2) immediately adds data to the cache and then blocks
while the daemon processes the write operation.
A side effect of this change is that non-cache-block-aligned writes will now
incur a read-modify-write cycle of the cache block. The old behavior
(bypassing write cache entirely) can still be achieved by opening a file
with O_DIRECT.
PR: 237588
Sponsored by: The FreeBSD Foundation
Enable write clustering in fusefs whenever cache mode is set to writeback
and the "async" mount option is used. With default values for MAXPHYS,
DFLTPHYS, and the fuse max_write mount parameter, that means sequential
writes will now be written 128KB at a time instead of 64KB.
Also, add a regression test for PR 238565, a panic during unmount that
probably affects UFS, ext2, and msdosfs as well as fusefs.
PR: 238565
Sponsored by: The FreeBSD Foundation
An errant vfs_bio_clrbuf snuck in in r348931. Surprisingly, it doesn't have
any effect most of the time. But under some circumstances it cause the
buffer to behave in a write-only fashion.
Sponsored by: The FreeBSD Foundation
The current "writeback" cache mode, selected by the
vfs.fusefs.data_cache_mode sysctl, doesn't do writeback cacheing at all. It
merely goes through the motions of using buf(9), but then writes every
buffer synchronously. This commit:
* Enables delayed writes when the sysctl is set to writeback cacheing
* Fixes a cache-coherency problem when extending a file whose last page has
just been written.
* Removes the "sync" mount option, which had been set unconditionally.
* Adjusts some SDT probes
* Adds several new tests that mimic what fsx does but with more control and
without a real file system. As I discover failures with fsx, I add
regression tests to this file.
* Adds a test that ensures we can append to a file without reading any data
from it.
This change is still incomplete. Clustered writing is not yet supported,
and there are frequent "panic: vm_fault_hold: fault on nofault entry" panics
that I need to fix.
Sponsored by: The FreeBSD Foundation
fusefs's I/O methods were originally copy/pasted from nfsclient. This
commit removes some irrelevant parts, like stuff involving B_NEEDCOMMIT.
Sponsored by: The FreeBSD Foundation
Add the debug.try_reclaim_vnode sysctl. When a pathname is written to it, it
will be reclaimed, as long as it isn't already or doomed. The purpose is to
gain test coverage for vnode reclamation, which is otherwise hard to
achieve.
Add the debug.ftry_reclaim_vnode sysctl. It does the same thing, except
that its argument is a file descriptor instead of a pathname.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20519
The corresponding changes for the RACK stack where missed and are added
by this commit.
Reviewed by: Richard Scheffenegger, rrs@
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D20372
The comment property was listed in the man page twice, once under the list
of read-only properties, and again (correctly), under the list of user
editable properties.
PR: 238355
Reported by: Michael Zuo <muh.muhten@gmail.com>
Sponsored by: Klara Systems
Coverity warned about gdb_write_mem sign extending the result of
parse_byte shifted left by 24 bits when generating a 32-bit memory
write value for MMIO. Simplify the code by using parse_integer
instead of unrolled parse_byte calls.
CID: 1401600
Reviewed by: cem
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D20508
Create two tests checking if we can read urgs registers and if the
rax register returns a correct number.
Reviewed by: markj
Discussed with: lwhsu
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20364
The registers in ilumos and FreeBSD have a different number.
In the illumos, last 32-bits register defined is SS an in FreeBSD is GS.
This off-by-one caused the uregs array to returns the wrong 64-bits register
on amd64.
Reviewed by: markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20363
vnode is no longer resident.
Mapping of tmpfs file does not bump use count on the vnode, because
backing object has swap type. As result, even during normal
operations, and of course on forced unmount, we might end up with text
mapping from tmpfs node which has no vnode in memory. In this case,
there is no v_writecount to clear (this was done during reclaim), and
no reason to assert that the vnode is present.
Restructure the code to silently ignore OBJ_SWAP objects with
OBJ_TMPFS_NODE flag set, but OBJ_TMPFS flag clear.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Both filesystems do no use vnode_pager_dealloc() which would handle
this case otherwise. Nullfs because vnode vm_object handle never
points to nullfs vnode. Tmpfs because its vm_object is never vnode
object at all.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
pci_alloc_msix() requires both the table and PBA BARs to be allocated
by the driver. ppt was only allocating the table BAR so would fail
for devices with the PBA in a separate BAR. Fix this by allocating
the PBA BAR before pci_alloc_msix() if it is stored in a separate BAR.
While here, release BARs after calling pci_release_msi() instead of
before. Also, don't call bus_teardown_intr() in error handling code
if bus_setup_intr() has just failed.
Reported by: gallatin
Tested by: gallatin
Reviewed by: rgrimes, markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20525
bhyve has to virtualize the MSI-X table to trap reads and writes to
that table and map those to virtual interrupts that it maps real host
interrupts on to. For the pending-bit-array (PBA), bhyve passes
accesses from the guest directly to the hardware.
bhyve's virtualization of the MSI-X table is done by intercepting all
reads and writes to the BAR holding the MSI-X table. However, if the
PBA is stored in the same BAR as the MSI-X table, accesses to the PBA
portion of this BAR have to be forwarded to the real BAR.
However, in the case that the PBA was stored in a separate BAR and
it's offset in that separate BAR overlapped with the portion of the
MSI-X table BAR that the table used, the handlers for the table BAR
would incorrectly think that some accesses were PBA reads and writes.
This caused a crash in bhyve when it indirected a NULL pointer. Fix
this case by never trying to handle PBA access if the PBA lives in a
separate BAR.
Reported by: gallatin
Tested by: gallatin
Reviewed by: markj, Patrick Mooney
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20523
The kernel has a limit of 131072 glyphs in a font; add the same check to
vtfontcvt so that we won't create a font file that the kernel will not
load.
PR: 205707
Submitted by: Dmitry Wagin
MFC after: 2 weeks
r348504 moved llvm-symbolizer from the CLANG_EXTRAS knob to CLANG, but
the man page was still in the CLANG_EXTRAS section in
OptionalObsoleteFiles.inc.
Reported by: jhb
MFC after: 3 days
MFC with: r348504
Unlike BUS_READ_IVAR / BUS_WRITE_IVAR, bus accessors do not have a
return code. It is assumed that there is a tight coupling between a bus
driver and a driver for a device on the bus with respect to instance
variables that the bus defines for its children. So, the driver is
supposed to have only valid accesses to the variables and, thus, the
accessors must always succeed.
Of course, programming errors sometimes happen. At present, such errors
go completely unnoticed. The idea of this change is to start catching
them. As a first step, there will be a warning about a failed accessor
call. This is to give developers a heads-up. I plan to replace the
printf with a KASSERT a week later, so that the warning is harder to
ignore.
Reviewed by: cem, imp, ian
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20458
Prior to this commit, if PCIEM_SLOT_STA_ABP and PCIEM_SLOT_STA_PDC are
asserted simultaneously, FreeBSD sets a 5 second "hardware going away" timer
and then processes the "presence detect" change. In the (physically
challenging) case that someone presses the "attention button" and inserts
a new PCIe device at exactly the same moment, this results in FreeBSD
recognizing that the device is present, attaching it, and then detaching it
5 seconds later.
On EC2 "bare metal" hardware this is the precise sequence of events which
takes place when a new EBS volume is attached; virtual machines have no
difficulty effecting physically implausible simultaneity.
This patch changes the handling of PCIEM_SLOT_STA_ABP to only detach a
device if the presence of a device was detected *before* the interrupt
which reports the Attention Button push.
Reported by: Matt Wilson
Reviewed by: jhb
MFC after: 1 week
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D20499
After r348610 `make delete-old` was still removing llvm-ar and llvm-nm
(and associated man pages).
Reported by: jhb
Sponsored by: The FreeBSD Foundation
