As the XXX notes, these should really be checking MK_GNUCXX since there is
already a version check in share/mk/src.opts.mk to disable it. Fixing that
here is more complex though. This could also be using X_COMPILER_FEATURES
but uses X_COMPILER_VERSION to keep in sync with the src.opts.mk logic.
Tested by: andreast
Sponsored by: EMC / Isilon Storage Division
Approved by: re (gjb)
associated) instance.
The result is that the packet is dropped without an indication
that smaller MTU is advisable, which is not optimal, but better
than a NULL pointer deref.
Approved by: re (glebius)
This fixes the build when DESTDIR may be blank or not yet populated.
It also fixes reproducibility.
Submitted by: brooks
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D6455
particular, the Giant is supposed to protect against parallel
ntp_adjtime(2) invocations. But, for instance, sys_ntp_adjtime() does
copyout(9) under Giant and then examines time_status to return syscall
result. Since copyout(9) could sleep, the syscall result might be
inconsistent.
Another and more important issue is that if PPS is configured,
hardpps(9) is executed without any protection against the parallel
top-level code invocation. Potentially, this may result in the
inconsistent state of the ntptime state variables, but I cannot say
how serious such distortion is. The non-functional splclock() call in
sys_ntp_adjtime() protected against clock interrupts calling hardpps()
in the pre-SMP era.
Modernize the locking. A mutex protects ntptime data. Due to the
hardpps() KPI legitimately serving from the interrupt filters (and
e.g. uart(4) does call it from filter), the lock cannot be sleepable
mutex if PPS_SYNC is defined. Otherwise, use normal sleepable mutex
to reduce interrupt latency.
Reviewed by: imp, jhb
Sponsored by: The FreeBSD Foundation
Approved by: re (gjb)
Differential revision: https://reviews.freebsd.org/D6825
private mtx in resettodr(), no implementation of CLOCK_SETTIME() is
allowed to sleep.
Reviewed by: imp, jhb
Sponsored by: The FreeBSD Foundation
Approved by: re (gjb)
X-Differential revision: https://reviews.freebsd.org/D6825
TDF_SEINTR flags values, unlike TDF_SBDRY, must be treated almost as
if TDF_SBDRY is not set for STOP signal delivery. The only difference
is that sig_suspend_threads() should abort the sleep instead of doing
immediate suspension.
Reported by: ngie
Sponsored by: The FreeBSD Foundation
MFC after: 12 days
Approved by: re (gjb)
(WITH_SYSTEM_COMPILER: Enable by default) and it's prerequisite: r300354,
caused i386 builds to fail when cross-built on an amd64 host.
Reviewed by: bdrewery, delphij, gjb
Approved by: re (gjb)
structure, change it to int.
The real fix is to sanitize user-visible definitions in sys/event.h,
e.g. the affected struct knlist is of no use for userspace programs.
Reported and tested by: jkim
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Approved by: re (gjb)
sleepable scan, iteration over the shadow chain looking for a page
could find an OBJ_DEAD object. Such state of the mapping is only
transient, the dead object will be terminated and removed from the
chain shortly. We must not return KERN_PROTECTION_FAILURE unless the
object type is changed to OBJT_DEAD in the chain, indicating that
paging on this address is really impossible. Returning
KERN_PROTECTION_FAILURE prematurely causes spurious SIGSEGV delivered
to processes, or kernel accesses to UVA spuriously failing with
EFAULT.
If the object with OBJ_DEAD flag is found, only return
KERN_PROTECTION_FAILURE when object type is already OBJT_DEAD.
Otherwise, sleep a tick and retry the fault handling.
Ideally, we would wait until the OBJ_DEAD flag is resolved, e.g. by
waiting until the paging on this object is finished. But to do so, we
need to reference the dead object, while vm_object_collapse() insists
on owning the final reference on the collapsed object. This could be
fixed by e.g. changing the assert to shared reference release between
vm_fault() and vm_object_collapse(), but it seems to be too much
complications for rare boundary condition.
PR: 204426
Tested by: pho
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
X-Differential revision: https://reviews.freebsd.org/D6085
MFC after: 2 weeks
Approved by: re (gjb)
exiting (NOTE_EXIT->knlist_remove_inevent()), two things happen:
- knote kn_knlist pointer is reset
- INFLUX knote is removed from the process knlist.
And, there are two consequences:
- KN_LIST_UNLOCK() on such knote is nop
- there is nothing which would block exit1() from processing past the
knlist_destroy() (and knlist_destroy() resets knlist lock pointers).
Both consequences result either in leaked process lock, or
dereferencing NULL function pointers for locking.
Handle this by stopping embedding the process knlist into struct proc.
Instead, the knlist is allocated together with struct proc, but marked
as autodestroy on the zombie reap, by knlist_detach() function. The
knlist is freed when last kevent is removed from the list, in
particular, at the zombie reap time if the list is empty. As result,
the knlist_remove_inevent() is no longer needed and removed.
Other changes:
In filt_procattach(), clear NOTE_EXEC and NOTE_FORK desired events
from kn_sfflags for knote registered by kernel to only get NOTE_CHILD
notifications. The flags leak resulted in excessive
NOTE_EXEC/NOTE_FORK reports.
Fix immediate note activation in filt_procattach(). Condition should
be either the immediate CHILD_NOTE activation, or immediate NOTE_EXIT
report for the exiting process.
In knote_fork(), do not perform racy check for KN_INFLUX before kq
lock is taken. Besides being racy, it did not accounted for notes
just added by scan (KN_SCAN).
Some minor and incomplete style fixes.
Analyzed and tested by: Eric Badger <eric@badgerio.us>
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Approved by: re (gjb)
Differential revision: https://reviews.freebsd.org/D6859
interrupt sleeps with the ERESTART on the suspension attempts.
Otherwise, single-threading requests are deferred until the locks are
granted for NFS files, which causes hangs.
When retrying local registration of the remotely-granted adv lock,
allow full suspension and check for suspension, for usual reasons.
Reported by: markj, pho
Reviewed by: jilles
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Approved by: re (gjb)
framework allowing to set the suspension policy for the dynamic block.
Extend the currently possible policies of stopping on interruptible
sleeps and ignoring such sleeps by two more: do not suspend at
interruptible sleeps, but interrupt them with either EINTR or ERESTART.
Reviewed by: jilles
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Approved by: re (gjb)
Most of the effect of setting MSR[SF] is that the CPU will stop ignoring
the high 32 bits of registers containing addresses in load/store
instructions. As such, the kernel was setting it only when it began to
need access to high memory. MSR[SF] also affects the operation of some
conditional instructions, however, and so setting it at late times could
subtly break code at very early times. This fixes use of the FDT mode in
loader, and FDT boot more generally, on 64-bit PowerPC systems.
Hardware provided by: IBM LTC
Approved by: re (kib)
[1] Remove unneeded sockaddr conversion before kern_recvit() call as the from
argument is used to record result (the source address of the received message) only.
[2] In Linux the type of msg_namelen member of struct msghdr is signed but native
msg_namelen has a unsigned type (socklen_t). So use the proper storage to fetch fromlen
from userspace and than check the user supplied value and return EINVAL if it is less
than 0 as a Linux do.
Reported by: Thomas Mueller <tmueller at sysgo dot com> [1]
Reviewed by: kib@
Approved by: re (gjb, kib)
MFC after: 3 days
for messages which have been put on the send queue:
* Do not report any DATA or I-DATA chunk padding.
* Correctly deal with the I-DATA chunk header instead of the DATA
chunk header when the I-DATA extension is used.
Approved by: re (kib)
MFC after: 1 week
A couple of minor memory size option related nits:
- use common name 'memsize' (instead of 'max-size' or just 'size')
- bhyve: update usage with memsize unit suffix, drop legacy "MB"
unit
- bhyveload: update usage with memsize unit suffix
- bhyve(8): document default size
- bhyveload(8): use memsize formatting like it's done
in bhyve(8)
Reviewed by: wblock, grehan
Approved by: re (kib), wblock, grehan
Differential Revision: https://reviews.freebsd.org/D6952
usr.bin/lastcom/tests/Makefile
usr.sbin/sa/tests/Makefile
Set allow_architectures appropriately. These tests depend on golden
files that must be generated for each architecture, and haven't yet
been generated for all of them.
PR: 210566
PR: 204154
Reviewed by: ngie
Approved by: re (gjb)
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D6960
avos@ pointed out to me that this broke IBSS merging because the rest of
the input path no longer was called for non-IBSS frames.
I committed a change to not input non-IBSS frames, which stopped
nodes being created for BSSes that weren't ours. Unfortunately
thta stopped the input path for non-IBSS frames in general,
so the management input path didn't work.
So, I'll revert this until I come up with a better solution.
(Hopefully before 11.)
Reviewed by: avos
Approved by: re (gjb)
the return value, in particular console-kit-daemon.
Reported by: Ivan Klymenko <fidaj@ukr.net>
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Approved by: re (gjb)
* sctp46, tcp46, and udp46 sockets are displayed as such and not as
sctp4 6, tcp4 6, udp4 6. This bug was introduced in
http://svnweb.freebsd.org/base?view=revision&revision=187915
* For SCTP sockets, the the -4 and -6 flags are honoured as much as
possible. This means IPv4 sockets are handled correctly, IPv6
sockets are displayed as sctp46, since it is currently not possible
to distinguish between sctp6 and sctp46.
Approved by: re (gjb)
MFC after: 1 week
executed by inactive methods, must be repeated on reclaim. In
particular, unlink and free sillyrenamed vnode both on inactivation
and reclaim.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Approved by: re (gjb)
lists must be functional.
Reported by: Daniel Engberg <daniel.engberg.lists@pyret.net>,
Guy Yur <guyyur@gmail.com>
Tested by: Guy Yur <guyyur@gmail.com>
Sponsored by: The FreeBSD Foundation
Approved by: re (gjb), including the KBI change
adaptive mutex, return EDEADLK as required by POSIX. The
pthread_mutex_lock() is already compliant.
Tested by: Guy Yur <guyyur@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Approved by: re (gjb)
pci_if.
This allows bhnd(4) to manage per-device state (such as per-core
pmu/clock refcounting) on behalf of subclass driver instances.
Approved by: re (gjb), adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D6959
The delta between SENTRY5 and BCM was already small due to BCM being
derived from SENTRY5; re-integrating the two avoids the maintenance
overhead of keeping them both in sync with bhnd(4) changes.
- Re-integrate minor SENTRY5 deltas in bcm_machdep.c
- Modify uart_cpu_chipc to allow specifying UART debug/console flags via
kenv and device hints.
- Switch SENTRY5 to std.broadcom
- Enabled CFI flash support for SENTRY5
Reviewed by: Michael Zhilin <mizkha@gmail.com> (Broadcom MIPS support)
Approved by: re (gjb), adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D6897
Replaces use of DEVICE_IDENTIFY with explicit enumeration of chipc
child devices using the chipc capability structure.
This is a precursor to PMU support, which requires more complex resource
assignment handling than achievable with the static device name-based
hints table.
Reviewed by: Michael Zhilin <mizkha@gmail.com> (Broadcom MIPS support)
Approved by: re (gjb), adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D6896
Replace m_getcl() with m_get2(); this fixes 'frame too long'
messages for frames, which are longer than MCLBYTES
(can be easily triggered when A-MSDU is used).
Tested with RTL8188CUS (AP) and RTL8188EU (STA).
Approved by: re (marius)
Free data buffers every time when device is stopped, not when
it is detached; they are allocated at the initialization stage.
How-to-reproduce:
1) ifconfig wlan0 create wlandev urtwn0 up
2) vmstat -m | grep USBdev
3) service netif restart
4) vmstat -m | grep USBdev
Also, remove usbd_transfer_drain() call; it is already called by
usbd_transfer_unsetup().
Tested with RTL8188CUS, STA mode.
Approved by: re (marius)
This change has functional impact, and other concerns raised
by the OpenSSH maintainer.
Requested by: des
PR: 210479 (related)
Approved by: re (marius)
Sponsored by: The FreeBSD Foundation
The new 'machdep.disable_msix_migration' tunable can be set to 1 to
disable migration of MSI-X interrupts.
Xen versions prior to 4.6.0 do not properly handle updates to MSI-X
table entries after the initial write. In particular, the operation
to unmask a table entry after updating it during migration is not
propagated to the "real" table for passthrough devices causing the
interrupt to remain masked. At least some systems in EC2 are
affected by this bug when using SRIOV. The tunable can be set in
loader.conf as a workaround.
Submitted by: Jeremiah Lott <jlott@averesystems.com> (original patch)
Approved by: re (marius)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6947
sys/sys/bitstring.h
Fix a rounding calculation that could undersize a bitstring on
32-bit platforms.
tests/sys/sys/bitstring_test.h
Add a test for bitstr_size
PR: 210260
Reported by: Mark Millard
Reviewed by: gibbs
Approved by: re (marius)
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D6848
Otherwise gcore's ptrace attach operation can race with delivery of a
signal and cause it to be lost.
In collaboration with: Suraj Raju <sraju@isilon.com>
Reviewed by: bdrewery
Approved by: re (gjb, kib)
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
This improves buildworld, toolchain, kernel-toolchain, and universe targets.
See r300354 or src.conf(5) for more details.
Approved by: re (gjb)
Relnotes: yes (r300354)
Sponsored by: EMC / Isilon Storage Division
kgzldr.o is installed into /usr/lib but using bsd.prog.mk. Add
/usr/lib to the base system directory list so that debug files are
installed into /usr/lib/debug/usr/lib, not /usr/lib/.debug .
Approved by: re (gjb)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
