Commit Graph

157058 Commits

Author SHA1 Message Date
Pyun YongHyeon
1e77baed0d Controller does not seem to support more than 1024 bytes DMA burst.
Limit DMA burst size to be less than or equal to 1024 bytes.
2010-08-07 23:33:06 +00:00
Pyun YongHyeon
e7a28130c4 Marvell model number 0x06 is 88E1101 PHY. 2010-08-07 23:16:21 +00:00
Oliver Fromme
2c76b63f00 jh pointed out that src/usr.sbin already has a global
WARNS=6 setting in HEAD (unlike stable/8), so it's best
to remove the line entirely.

Pointed out by:	jh
Approved by:	des (mentor)
2010-08-07 20:46:30 +00:00
Ivan Voras
27f11235b9 To help with sequential read UFS performance on modern systems, increase
the vfs.read_max default. For most systems this means going from 128 KiB
to 256 KiB, which is still very conservative and lower than what most
other operating systems use, but as a sane default should not
interfere much with existing systems.

For systems with RAID volumes and/or virtualization envirnments, where
read performance is very important, increasing this sysctl tunable to 32
or even more will demonstratively yield additional performance benefits.

If MAXPHYS ever gets bumped up, it will probably be a good idea to slave
read_max to it.
2010-08-07 18:30:10 +00:00
Michael Tuexen
af9ba7d805 Fix a bug where MSG_TRUNC was not returned in all necessary cases for
SOCK_DGRAM socket. MSG_TRUNC was only returned when some mbufs could
not be copied to the application. If some data was left in the last
mbuf, it was correctly discarded, but MSG_TRUNC was not set.

Reviewed by: bz
MFC after: 3 weeks
2010-08-07 17:57:58 +00:00
Gavin Atkinson
3e9b610706 Add a keymap for the Swiss-German Macbook keyboard.
PR:		conf/139997
Submitted by:	Andreas Tobler <andreast fgznet.ch>
MFC after:	2 weeks
Committed from:	Bugathon #7
2010-08-07 17:02:36 +00:00
Oliver Fromme
974835c956 syslogd(8) already supports *sending* log messages to non-
standard ports, but it can't *receive* them (port 514 is
hardcoded).  This commit adds that missing feature.

(NB:  I actually needed this feature for a server farm where
multiple jails run with shared IP addresses, and every jail
should have its own syslogd process.)

As a side effect, syslogd now compiles with WARNS=6.

Approved by:	des (mentor)
MFC after:	3 weeks
2010-08-07 16:20:12 +00:00
Gavin Atkinson
ce617aca0a Sync the list of devices supported by uslcom(4) with NetBSD, Linux, OpenBSD
and BeOS.  The devices supported by uslcom(4) are now in sync with:

NetBSD  src/sys/dev/usb/uslsa.c 1.11
OpenBSD src/sys/dev/usb/uslcom.c 1.20
Linux   source/drivers/usb/serial/cp210x.c from kernel 2.6.35
BeOS    usb_serial/driver.c 1.32

Two vendor/product IDs from Linux have not been added to uslcom(4):
  SILABS SAEL - This device has special code in u3g to support it
  SILABS GSM2228 - I suspect this should also be covered by u3g(4).

MFC after:	1 week
2010-08-07 16:14:40 +00:00
Gavin Atkinson
01a8caf18e Sort this file a little better: the vendors are supposed to be sorted by
vendor ID in the vendor section, and by symbolic name in the product
section.  Products are sorted by product ID.  While here, get rid of a
duplicate Microsoft Mouse entry, revealed by sorting.

MFC after:	1 week
2010-08-07 16:08:37 +00:00
Dag-Erling Smørgrav
c3a2dbe9e5 Document the MEXTADD macro.
MFC after:	2 weeks
2010-08-07 13:26:08 +00:00
Konstantin Belousov
1757d9699d Prefer struct sysentvec sv_psstrings to hardcoding FREEBSD32_PS_STRINGS
in the compat32 code. Use sv_usrstack instead of FREEBSD32_USRSTACK as well.

MFC after:	1 week
2010-08-07 11:57:13 +00:00
Konstantin Belousov
4605ef76e7 Add compat32 definition for (old) struct ostat.
MFC after:	1 week
2010-08-07 11:53:38 +00:00
Yaroslav Tykhiy
0d0699a172 Clean up the style and markup of the paragraph on fractional wait intervals.
MFC after:	3 days
2010-08-07 11:48:31 +00:00
Yaroslav Tykhiy
4eac7ff119 Properly spell and mark up the name of kern.hz.
MFC after:	3 days
2010-08-07 11:32:17 +00:00
Yaroslav Tykhiy
40f2ad794d Move the sentences telling the defaults for -c and -w
to where they belong.  Previously they were misplaced,
i.e., swapped.

MFC after:	3 days
2010-08-07 11:13:50 +00:00
Pawel Jakub Dawidek
8dc7024be4 In FreeBSD we use 'jailed' property.
MFC after:	2 weeks
2010-08-07 10:23:54 +00:00
Joel Dahl
7f22a6d334 Fix typo in comment. 2010-08-07 08:31:32 +00:00
Robert Watson
be80264279 Properly bounds check ioctl/pioctl data arguments for Coda:
1. Use unsigned rather than signed lengths
2. Bound messages to/from Venus to VC_MAXMSGSIZE
3. Bound messages to/from general user processes to VC_MAXDATASIZE
4. Update comment regarding data limits for pioctl

Without (1) and (3), it may be possible for unprivileged user processes to
read sensitive portions of kernel memory.  This issue is only present if
the Coda kernel module is loaded and venus (the userspace Coda daemon) is
running and has /coda mounted.

As Coda is considered experimental and production use is warned against in
the coda(4) man page, and because Coda must be explicitly configured for a
configuration to be vulnerable, we won't be issuing a security advisory.
However, if you are using Coda, then you are advised to apply these fixes.

Reported by:	Dan J. Rosenberg <drosenberg at vsecurity.com>
Obtained from:	NetBSD (Christos Zoulas)
Security:	Kernel memory disclosure; no advisory as feature experimental
MFC after:	3 days
2010-08-07 08:08:14 +00:00
Jung-uk Kim
90f06c5eae Protect shared palette and state buffer with a mutex. Remove defunct
spltty() calls while I am here.
2010-08-07 05:46:04 +00:00
Jung-uk Kim
a6d613a57f Do not block any I/O port on amd64. 2010-08-07 04:05:58 +00:00
Jung-uk Kim
d7a5fb634f Optimize interrupt vector lookup. There is no need to check the page table. 2010-08-07 03:45:45 +00:00
Neel Natu
f978c8f2c3 - Consolidate the the cache coherence attribute definitions in a single place.
Adapted from Juli's changes to pte.h in the octeon branch:
  http://svn.freebsd.org/viewvc/base/user/jmallett/octeon/sys/mips/include/pte.h

- Set the KX and UX bits in the status register for n64 kernels.

Reviewed by:	jmallett
2010-08-07 01:49:44 +00:00
Pawel Jakub Dawidek
6a8ecf4c59 Various cleanups, mostly to make the test work on FreeBSD/ZFS. 2010-08-06 23:58:54 +00:00
Jung-uk Kim
34622ff1ab When EC burst mode is activated and multiple bytes are accessed, do not
disable and enable repeatedly, just do it once per call.  It also reduces
code duplication.  Check all parameters early and fail immediately.
2010-08-06 23:35:33 +00:00
Jung-uk Kim
709fac0616 Merge ACPICA 20100806. 2010-08-06 23:11:19 +00:00
Jamie Gritton
10310d6706 Note that a jail without a command parameter will be persistent,
instead of explicitly requiring one of "command" or "persist".

MFC after:	3 days
2010-08-06 22:06:12 +00:00
Jamie Gritton
f4aad87394 Implicitly make a new jail persistent if it's set not to attach.
MFC after:	3 days
2010-08-06 22:04:18 +00:00
Pawel Jakub Dawidek
f8287aa0ac ${GREP} can only be used after loading 'conf'. 2010-08-06 21:58:53 +00:00
Pawel Jakub Dawidek
8f3ff75868 Don't use egrep directly - use ${GREP}. 2010-08-06 21:57:11 +00:00
Pawel Jakub Dawidek
3556206aad Check first todo() argument against operating system name and operating system
name plus file system name.
2010-08-06 21:56:32 +00:00
Pawel Jakub Dawidek
520fad0247 For FreeBSD and Linux use awk's toupper() function.
Suggested by:	ed
2010-08-06 21:53:50 +00:00
Pawel Jakub Dawidek
f7bfc405c7 Convert file system type to upper case. 2010-08-06 21:02:53 +00:00
Jack F Vogel
3b9b3fc3bf Put the early setting of the MAC type back, its
removal resulted in broken code in MSIX setup.
2010-08-06 20:55:49 +00:00
Pawel Jakub Dawidek
bbbc67e6ff Add tests for mknod(2).
Submitted by:	Jan Senolt <senoltj@centrum.cz>
Submitted by:	Milan Cermak <Milan.Cermak@Sun.COM>
Polished by:	pjd
2010-08-06 20:51:39 +00:00
Pawel Jakub Dawidek
ce29a12f91 Add mknod(2) support.
Submitted by:	Jan Senolt <senoltj@centrum.cz>
Submitted by:	Milan Cermak <Milan.Cermak@Sun.COM>
2010-08-06 20:48:10 +00:00
Pawel Jakub Dawidek
c9ea9723b0 Sort includes. 2010-08-06 20:46:26 +00:00
Bernhard Schmidt
39eb4bc6b2 Obviously the option is known as COMPAT_LINUX32 on amd64.
PR:		docs/149182
Pointed out by:	Fernando <fernando.apesteguia at gmail.com>
MFC after:	3 days
2010-08-06 20:18:16 +00:00
Ed Schouten
29b63864a2 Remove unneeded functions from libcompat.
Erwin fired up a ports build a couple of weeks ago and it seems the
following functions are not used by any of the 20k ports we have, which
makes me believe they don't have any purpose. Just remove them.
2010-08-06 20:13:36 +00:00
Ed Schouten
cdd337c2de Remove stale reference to UT_NAMESIZE from <stdio.h>.
Spotted by:	bde@
2010-08-06 19:35:40 +00:00
Pawel Jakub Dawidek
6c4a79e1b1 open(2) returns EOPNOTSUPP when trying to open a socket. 2010-08-06 19:22:42 +00:00
Pawel Jakub Dawidek
ce2decb660 Test for EACCES also when opening FIFO or directory. 2010-08-06 19:20:35 +00:00
Pawel Jakub Dawidek
482fdb1334 Test O_RDONLY|O_RDWR flags as potentially invalid. 2010-08-06 19:19:14 +00:00
Pawel Jakub Dawidek
adab8b00ab Make description readable. 2010-08-06 19:18:19 +00:00
Pawel Jakub Dawidek
b8f0e1661c Add missing -U argument to usage. 2010-08-06 19:16:48 +00:00
Pawel Jakub Dawidek
feb6813113 Implement two new syscalls: bind(2) and connect(2) for operating on UNIX
domain sockets.
2010-08-06 19:16:20 +00:00
Bernhard Schmidt
5ec432ed82 Fix whitespace nits.
PR:		conf/148989
Submitted by:	pluknet <pluknet at gmail.com>
MFC after:	3 days
2010-08-06 18:46:27 +00:00
Pyun YongHyeon
869ae66dfc Fix a typo introduced in r210936 which broke build. 2010-08-06 18:44:07 +00:00
Jung-uk Kim
32e234a854 Import ACPICA 20100806. 2010-08-06 17:28:40 +00:00
Matt Jacob
c97bb67a70 Figure which is the IO and MEM bars- do not assume that they are in
a fixed order.

PR:		149220
Obtained from:	John Baldwin
MFC after:	1 month
2010-08-06 17:27:00 +00:00
Jung-uk Kim
64299552b9 Remove unnecessary casting and simplify code. We are not there yet. ;-) 2010-08-06 17:21:32 +00:00