The sun8i-a83t-bananapi-m3-emac overlay technically doesn't match what will
be coming from upstream. The tx-delay and rx-delay should be specified in
terms of allwinner,tx-delay-ps and allwinner,rx-delay-ps respectively. The
values are still technically correct for what we write in if_awg, and
support for the new bindings will be coming soon.
opposed to one that accidentally worked on the one arch I test-compiled for
on my first try).
Reported by: np@, O. Hartmann <ohartmann@walstatt.org>
Pointy hat: ian@
frequency ioctl actually set the corresponding ivar instead of just storing
the value locally in the softc (and then not using it for anything). Also,
return the correct error code if the ioctl cmd is not recognized.
FDT-based systems, and instead add proper FDT probe code. Because this
driver is freebsd-specific and just provides generic userland access to run
spibus transactions, there is no bindings document to mandate a compatible
string, so just arbitrarily use "freebsd,spigen".
implementation that must be used, it's just the base system default driver.
Also add a comment noting that we're being more liberal about the bus
frequency property than the dts binding documents require.
- Change the description string to "SPI bus" (was "spibus bus").
- This is the default driver for a SPI bus, not a generic implementation,
so return the probe value that indicates such.
- Use device_delete_children() at detach time, instead of a local loop
to enumerate the children and detach each one individually.
and phase) and the maximum bus speed can be changed. The chip select
number cannot be changed, because the device instances which are children
of spibus are inherently associated with the chip select number they were
instantiated for.
SKZ63 Processor May Hang When Executing Code In an HLE Transaction
Region
Problem: Under certain conditions, if the processor acquires an HLE
(Hardware Lock Elision) lock via the XACQUIRE instruction in the Host
Physical Address range between 40000000H and 403FFFFFH, it may hang
with an internal timeout error (MCACOD 0400H) logged into
IA32_MCi_STATUS.
Move the pages from the range into the blacklist. Add a tunable to
not waste 4M if local DoS is not the issue.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D15001
If a regulator is missing a mandatory property (like 'regulator-name'), do
not fail, regulator_parse_ofw_stdparam is returning a non-zero value so just
skip this regulator.
Also if any regulator fails to attach continue with the rest of the regulators
instead of returning ENXIO in axp8xx_attach
Tested On: BananaPi M3
This is used as part of implementing run control in bhyve's debug
server. The hypervisor now maintains a set of "debugged" CPUs.
Attempting to run a debugged CPU will fail to execute any guest
instructions and will instead report a VM_EXITCODE_DEBUG exit to
the userland hypervisor. Virtual CPUs are placed into the debugged
state via vm_suspend_cpu() (implemented via a new VM_SUSPEND_CPU ioctl).
Virtual CPUs can be resumed via vm_resume_cpu() (VM_RESUME_CPU ioctl).
The debug server suspends virtual CPUs when it wishes them to stop
executing in the guest (for example, when a debugger attaches to the
server). The debug server can choose to resume only a subset of CPUs
(for example, when single stepping) or it can choose to resume all
CPUs. The debug server must explicitly mark a CPU as resumed via
vm_resume_cpu() before the virtual CPU will successfully execute any
guest instructions.
Reviewed by: avg, grehan
Tested on: Intel (jhb), AMD (avg)
Differential Revision: https://reviews.freebsd.org/D14466
Portable programs that use SIOCGIFCONF (e.g. traceroute) assume
that each pseudo ifreq is of length MAX(sizeof(struct ifreq),
sizeof(ifr_name) + ifr_addr.sa_len). For short sockaddrs we copied
too much from the source sockaddr resulting in a heap leak.
I believe only one such sockaddr exists (struct sockaddr_sco which
is 8 bytes) and it is unclear if such sockaddrs end up on interfaces
in practice. If it did, the result would be an 8 byte heap leak on
current architectures.
admbugs: 869
Reviewed by: kib
Obtained from: CheriBSD
MFC after: 3 days
Security: kernel heap leak
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14981
These have become unsorted from everything else. This is desync'd from
stable/11 due to some hand-merging that was done there, so the MFC of this
will look slightly different.
MFC after: 3 days
Ensure that multiplications for memory allocations cannot overflow, and
that we'll not try to allocate M_WAITOK for potentially overly large
allocations.
MFC after: 1 week
There was a memory leak in the DIOCRADDTABLES ioctl() code which could
be triggered by trying to add tables with the same name.
Try to provoke this memory leak. It was fixed in r331225.
MFC after: 1 week
These ioctls can process a number of items at a time, which puts us at
risk of overflow in mallocarray() and of impossibly large allocations
even if we don't overflow.
There's no obvious limit to the request size for these, so we limit the
requests to something which won't overflow. Change the memory allocation
to M_NOWAIT so excessive requests will fail rather than stall forever.
MFC after: 1 week
opt_compat.h is mentioned in nearly 180 files. In-progress network
driver compabibility improvements may add over 100 more so this is
closer to "just about everywhere" than "only some files" per the
guidance in sys/conf/options.
Keep COMPAT_LINUX32 in opt_compat.h as it is confined to a subset of
sys/compat/linux/*.c. A fake _COMPAT_LINUX option ensure opt_compat.h
is created on all architectures.
Move COMPAT_LINUXKPI to opt_dontuse.h as it is only used to control the
set of compiled files.
Reviewed by: kib, cem, jhb, jtl
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14941
tcp_drop() may unlock the INP. Currently, tcp_usr_abort() does not
check for this case, which results in a panic while trying to unlock
the already-unlocked INP (not to mention, a use-after-free violation).
Make tcp_usr_abort() check the return value of tcp_drop(). In the case
where tcp_drop() returns NULL, tcp_usr_abort() can skip further steps
to abort the connection and simply unlock the INP_INFO lock prior to
returning.
Reviewed by: glebius
MFC after: 2 weeks
Sponsored by: Netflix, Inc.
This caching has existed since the CSRG import, but serves no obvious
purpose. Sure, setlogin() is called rarely, but calls to getlogin()
should also be infrequent. The required invalidation was not
implemented on aarch64, arm, mips, amd riscv so updates would never
occur if getlogin() was called before setlogin().
Reported by: Ali Mashtizadeh <ali@mashtizadeh.com>
Reviewed by: kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14965
Now that all of parsemsg() parses both RFC 3164 and 5424 messages and
hands them to logmsg(), alter the latter to properly forward all RFC
5424 message attributes to fprintlog(). While there, make some minor
cleanups to this code:
- Instead of extending the existing code that compares hostnames and
message bodies for deduplication, print all of the relevant message
fields into a single string that we can compare ('saved').
- No longer let the behaviour of fprintflog() depend on whether
'msg == NULL' to print repetition messages, Simply decompose this
function into fprintlog_first() and fprintlog_successive(). This
makes the interpretation of function arguments less magical and also
allows us to get consistent behaviour across RFC 3164 and 5424 when
adding support for the RFC 5424 output format.
- As RFC 5424 syslog messages have a dedicated application name field,
alter the repetition messages to be printed on behalf of syslogd on
the current system. Change these messages to use the local hostname,
so that it's obvious which syslogd instance detected the repetition.
Remove f_prevhost, as it has now become unnecessary.
- Remove a useless strdup(). Deconsting the message string is safe in
this specific case.
we patted the watchdog approximately once per 4KB page of memory. After
this change, we pat the watchdog approximately once per 128MB of memory.
On a sample machine, this translated to patting the watchdog approximately
every 5.4 seconds, which "seems reasonable". We can choose a different
value in the future, if warranted.
This has extensive field experience. It is a performance improvement, and
has not caused any known problems.
Reviewed by: imp, kib
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D14988
assumption is violated, "bad things" could follow.
I believe such an assert would have detected some of the problems jch@
was chasing in PR 203175 (see r307551). We also use it in our internal
TCP development efforts. And, in case a bug does slip through to
released code, this change silently ignores subsequent calls to
in_pcbfree().
Reviewed by: rrs
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D14990
Add the missing breaks in the for loops, in order to exit the loop
when a suitable entry is found.
Also switch amd64 native_start_all_aps to use PHYS_TO_DMAP in order to
find the virtual address of the boot_trampoline and the initial page
tables.
Reported and tested by: pho
Sponsored by: Citrix Systems R&D
Validate the DIOCRGETTABLES, DIOCRGETTSTATS, DIOCRCLRTSTATS and
DIOCRSETTFLAGS ioctls with invalid values. These may succeed (because
the kernel uses the minimally required size, not the specified size),
but should not trigger kernel panics.
MFC after: 1 week
These ioctls can process a number of items at a time, which puts us at
risk of overflow in mallocarray() and of impossibly large allocations
even if we don't overflow.
Limit the allocation to required size (or the user allocation, if that's
smaller). That does mean we need to do the allocation with the rules
lock held (so the number doesn't change while we're doing this), so it
can't M_WAITOK.
MFC after: 1 week
Earlier efforts to stop loading the menu broke the ability to skip the menu
with, e.g., beastie_disable in loader.conf(5) as it was decided before
configuration was read.
Defer bringing in the menu module until we've loaded configuration so that
we can make a more informed decision on whether the menu should be skipped
or not.
It was later found that some operation on the OrangePi one will cause
direct accesses to the eeprom to return wrong data again, so reading it all
once via prctl at attach time is no longer sufficient.
enough rate, the IPMI code can print large numbers of messages to the
console, such as:
ipmi0: KCS: Failed to read completion code
ipmi0: KCS error: ff
ipmi0: KCS: Failed to read completion code
ipmi0: KCS error: ff
These seem to be innocuous from a system standpoint, and the user-
space code can deal with the failures. Therefore, suppress printing
these messages to the console unless bootverbose is enabled.
Obtained from: Netflix, Inc.
The DIOCRADDTABLES and DIOCRDELTABLES ioctls can process a number of
tables at a time, and as such try to allocate <number of tables> *
sizeof(struct pfr_table). This multiplication can overflow. Thanks to
mallocarray() this is not exploitable, but an overflow does panic the
system.
Arbitrarily limit this to 65535 tables. pfctl only ever processes one
table at a time, so it presents no issues there.
MFC after: 1 week
With r332099 changing syslogd(8) to parse RFC 5424 formatted syslog
messages, go ahead and also change the syslog(3) libc function to
generate them. Compared to RFC 3164, RFC 5424 has various advantages,
such as sub-second precision for log entry timestamps.
As this change could have adverse effects when not updating syslogd(8)
or using a different system logging daemon, add a notice to UPDATING and
increase __FreeBSD_version.
Differential Revision: https://reviews.freebsd.org/D14926
Syslogd currently uses the RFC 3164 format for its log messages.One
limitation of RFC 3164 is that it cannot be used to log entries with
sub-second precision timestamps. One of our users has expressed a desire
for doing this for doing some basic performance measurements.
This change attempts to make a first cut at switching to RFC 5424 based
logging. The first step is to alter syslogd's input path to properly
parse such messages. It alters the logmsg() prototype to match the
fields of RFC 5424. The parsemsg() function is extended to parse both
RFC 3164 and 5424 messages and call into logmsg() accordingly.
Additional changes include:
- Introducing proper parsing of timestamps, so that they can be printed
in any desired output format. This means we need to infer the year and
timezone for RFC 3164 timestamps.
- Removing ISKERNEL. This can now be realised by simply providing an
APP-NAME (== "kernel").
- Extending RFC 3164 parsing to trim off the TAG prefix and using that
to derive APP-NAME and PROCID.
- Increase MAXLINE. RFC 5424 mentions we should support 2k messages.
Differential Revision: https://reviews.freebsd.org/D14926
