- Ever since the workaround for the silicon bug of TSO4 causing MAC hangs
was committed in r295133, CSUM_TSO always got disabled unconditionally
by em(4) on the first invocation of em_init_locked(). However, even with
that problem fixed, it turned out that for at least e. g. 82579 not all
necessary TSO workarounds are in place, still causing MAC hangs even at
Gigabit speed. Thus, for stable/11, TSO usage was deliberately disabled
in r323292 (r323293 for stable/10) for the EM-class by default, allowing
users to turn it on if it happens to work with their particular EM MAC
in a Gigabit-only environment.
In head, the TSO workaround for speeds other than Gigabit was lost with
the conversion to iflib(9) in r311849 (possibly along with another one
or two TSO workarounds). Yet at the same time, for EM-class MACs TSO4
got enabled by default again, causing device hangs. Therefore, change the
default for this hardware class back to have TSO4 off, allowing users
to turn it on manually if it happens to work in their environment as
we do in stable/{10,11}. An alternative would be to add a whitelist of
EM-class devices where TSO4 actually is reliable with the workarounds in
place, but given that the advantage of TSO at Gigabit speed is rather
limited - especially with the overhead of these workarounds -, that's
really not worth it. [1]
This change includes the addition of an isc_capabilities to struct
if_softc_ctx so iflib(9) can also handle interface capabilities that
shouldn't be enabled by default which is used to handle the default-off
capabilities of e1000 as suggested by shurd@ and moving their handling
from em_setup_interface() to em_if_attach_pre() accordingly.
- Although 82543 support TSO4 in theory, the former lem(4) didn't have
support for TSO4, presumably because TSO4 is even more broken in the
LEM-class of MACs than the later EM ones. Still, TSO4 for LEM-class
devices was enabled as part of the conversion to iflib(9) in r311849,
causing device hangs. So revert back to the pre-r311849 behavior of
not supporting TSO4 for LEM-class at all, which includes not creating
a TSO DMA tag in iflib(9) for devices not having IFCAP_TSO4 set. [2]
- In fact, the FreeBSD TCP stack can handle a TSO size of IP_MAXPACKET
(65535) rather than FREEBSD_TSO_SIZE_MAX (65518). However, the TSO
DMA must have a maxsize of the maximum TSO size plus the size of a
VLAN header for software VLAN tagging. The iflib(9) converted em(4),
thus, first correctly sets scctx->isc_tx_tso_size_max to EM_TSO_SIZE
in em_if_attach_pre(), but later on overrides it with IP_MAXPACKET
in em_setup_interface() (apparently, left-over from pre-iflib(9)
times). So remove the later and correct iflib(9) to correctly cap
the maximum TSO size reported to the stack at IP_MAXPACKET. While at
it, let iflib(9) use if_sethwtsomax*().
This change includes the addition of isc_tso_max{seg,}size DMA engine
constraints for the TSO DMA tag to struct if_shared_ctx and letting
iflib_txsd_alloc() automatically adjust the maxsize of that tag in case
IFCAP_VLAN_MTU is supported as requested by shurd@.
- Move the if_setifheaderlen(9) call for adjusting the maximum Ethernet
header length from {ixgbe,ixl,ixlv,ixv,em}_setup_interface() to iflib(9)
so adjustment is automatically done in case IFCAP_VLAN_MTU is supported.
As a consequence, this adjustment now is also done in case of bnxt(4)
which missed it previously.
- Move the reduction of the maximum TSO segment count reported to the
stack by the number of m_pullup(9) calls (which in the worst case,
can add another mbuf and, thus, the requirement for another DMA
segment each) in the transmit path for performance reasons from
em_setup_interface() to iflib_txsd_alloc() as these pull-ups are now
done in iflib_parse_header() rather than in the no longer existing
em_xmit(). Moreover, this optimization applies to all drivers using
iflib(9) and not just em(4); all in-tree iflib(9) consumers still
have enough room to handle full size TSO packets. Also, reduce the
adjustment to the maximum number of m_pullup(9)'s now performed in
iflib_parse_header().
- Prior to the conversion of em(4)/igb(4)/lem(4) and ixl(4) to iflib(9)
in r311849 and r335338 respectively, these drivers didn't enable
IFCAP_VLAN_HWFILTER by default due to VLAN events not being passed
through by lagg(4). With iflib(9), IFCAP_VLAN_HWFILTER was turned on
by default but also lagg(4) was fixed in that regard in r203548. So
just remove the now redundant and defunct IFCAP_VLAN_HWFILTER handling
in {em,ixl,ixlv}_setup_interface().
- Nuke other redundant IFCAP_* setting in {em,ixl,ixlv}_setup_interface()
which is (more completely) already done in {em,ixl,ixlv}_if_attach_pre()
now.
- Remove some redundant/dead setting of scctx->isc_tx_csum_flags in
em_if_attach_pre().
- Remove some IFCAP_* duplicated either directly or indirectly (e. g.
via IFCAP_HWCSUM) in {EM,IGB,IXL}_CAPS.
- Don't bother to fiddle with IFCAP_HWSTATS in ixgbe(4)/ixgbev(4) as
iflib(9) adds that capability unconditionally.
- Remove some unused macros from em(4).
- Bump __FreeBSD_version as some of the above changes require the modules
of drivers using iflib(9) to be recompiled.
Okayed by: sbruno@ at 201806 DevSummit Transport Working Group [1]
Reviewed by: sbruno (earlier version), erj
PR: 219428 (part of; comment #10) [1], 220997 (part of; comment #3) [2]
Differential Revision: https://reviews.freebsd.org/D15720
Update the driver to use iflib in order to bring performance,
maintainability, and (hopefully) stability benefits to the driver.
The driver currently isn't completely ported; features that are missing:
- VF driver (ixlv)
- SR-IOV host support
- RDMA support
The plan is to have these re-added to the driver before the next FreeBSD release.
Reviewed by: gallatin@
Contributions by: gallatin@, mmacy@, krzysztof.galazka@intel.com
Tested by: jeffrey.e.pieper@intel.com
MFC after: 1 month
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D15577
Refresh upstream driver before impending conversion to iflib.
Major changes:
- Support for descriptor writeback mode (required by ixlv(4) for AVF support)
- Ability to disable firmware LLDP agent by user (PR 221530)
- Fix for TX queue hang when using TSO (PR 221919)
- Separate descriptor ring sizes for TX and RX rings
PR: 221530, 221919
Submitted by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Reviewed by: #IntelNetworking
MFC after: 1 day
Relnotes: Yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D14985
Changelist:
- Turn tx_rings and rx_rings arrays into arrays of pointers to kring
structs. This patch includes fixes for ixv, ixl, ix, re, cxgbe, iflib,
vtnet and ptnet drivers to cope with the change.
- Generalize the nm_config() callback to accept a struct containing many
parameters.
- Introduce NKR_FAKERING to support buffers sharing (used for netmap
pipes)
- Improved API for external VALE modules.
- Various bug fixes and improvements to the netmap memory allocator,
including support for externally (userspace) allocated memory.
- Refactoring of netmap pipes: now linked rings share the same netmap
buffers, with a separate set of kring pointers (rhead, rcur, rtail).
Buffer swapping does not need to happen anymore.
- Large refactoring of the control API towards an extensible solution;
the goal is to allow the addition of more commands and extension of
existing ones (with new options) without the need of hacks or the
risk of running out of configuration space.
A new NIOCCTRL ioctl has been added to handle all the requests of the
new control API, which cover all the functionalities so far supported.
The netmap API bumps from 11 to 12 with this patch. Full backward
compatibility is provided for the old control command (NIOCREGIF), by
means of a new netmap_legacy module. Many parts of the old netmap.h
header has now been moved to netmap_legacy.h (included by netmap.h).
Approved by: hrs (mentor)
This fixes 32-bit compat (no ioctl command defintions are required
as struct ifreq is the same size). This is believed to be sufficent to
fully support ifconfig on 32-bit systems.
Reviewed by: kib
Obtained from: CheriBSD
MFC after: 1 week
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14900
Uses of mallocarray(9).
The use of mallocarray(9) has rocketed the required swap to build FreeBSD.
This is likely caused by the allocation size attributes which put extra pressure
on the compiler.
Given that most of these checks are superfluous we have to choose better
where to use mallocarray(9). We still have more uses of mallocarray(9) but
hopefully this is enough to bring swap usage to a reasonable level.
Reported by: wosch
PR: 225197
IPV6_EXs in RSS never mean fragment. They mean:
"- Home address from the home address option in the IPv6 destination
options header. If the extension header is not present, use the
Source IPv6 Address.
- IPv6 address that is contained in the Routing-Header-Type-2 from
the associated extension header. If the extension header is not
present, use the Destination IPv6 Address."
UDP_IPV4_EX is an invalid RSS hash type, which will be removed.
Quoted from:
https://docs.microsoft.com/en-us/windows-hardware/drivers/network/rss-hashing-types#ndishashipv6ex
Reviewed by: erj
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D12450
queue lock when the uppoer stack is called inside TCP_LRO
Submitted by: Kevin Bowling <kevin.bowling@kev009.com>
Reviewed by: erj
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D11724
Fix minor -Werror issues when building with gcc from -Wredundant-decls,
-Wunused, -Wbool-operations. Also ensure the M_IXL malloc type is only
defined once.
Reviewed by: efj
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11414
From Brett:
In short, busdma maps for received packets were not being unloaded in the
interrupt handler before the packets were passed up the network stack. The fix
was to add a busdma sync and unload for the two receive maps.
This bug is significant for certain busdma providers, for example IOMMUs,
where not unloading the maps means that 1) the IOMMU mappings that allow the
NIC to DMA the received packets into host memory stay open indefinitely,
potentially violating a desired security policy, and 2) resources such as
device address space addresses and host memory for bookkeeping are never freed.
Without an IOMMU or bounce buffering enabled for the ixl device, I don't think
adding these calls will have any significant performance impact. With the
IOMMU enabled, I have noticed a performance impact on the receive side, which
is expected.
Submitted by: Brett Gutstein <bgutstein@rice.edu>
Reviewed by: erj@
MFC after: 1 week
Description from Brett:
"The busdma tags used to create mappings for the tx and rx rings did not have
the device's tag as parents, meaning that they did not respect the device's
busdma properties. The other tags used in the driver had their parents set
appropriately.
Also, the dma maps for each buffer in ixl_txeof() were being NULLed after
being unloaded, which is an error because those maps are then reused without
being recreated (I believe this also leaked resources since the maps were not
destroyed). Simply removing the line that sets the maps to NULL gives the
desired behavior. There does not seem to be a similar problem with ixl_rxeof().
Functions to free the tx and rx rings also NULL out the dma maps for each
buffer, but this seems okay because the maps are destroyed and not reused in
this case.
With these fixes, my ixl card seems to be working with the IOMMU enabled."
Submitted by: Brett Gutstein <bgutstein@rice.edu>
Reviewed by: erj
Approved by: Alan Cox <alc@rice.edu>
MFC after: 1 week
Refresh upstream driver before impending conversion to iflib.
Major new features:
- Support for Fortville-based 25G adapters
- Support for I2C reads/writes
(To prevent getting or sending corrupt data, you should set
dev.ixl.0.debug.disable_fw_link_management=1 when using I2C
[this will disable link!], then set it to 0 when done. The driver implements
the SIOCGI2C ioctl, so ifconfig -v works for reading I2C data,
but there are read_i2c and write_i2c sysctls under the .debug sysctl tree
[the latter being useful for upper page support in QSFP+]).
- Addition of an iWARP client interface (so the future iWARP driver for
X722 devices can communicate with the base driver).
- Compiling this option in is enabled by default, with "options IXL_IW" in
GENERIC.
Differential Revision: https://reviews.freebsd.org/D9227
Reviewed by: sbruno
MFC after: 2 weeks
Sponsored by: Intel Corporation
Original log:
Do not initialize the adapter on MTU change when adapter status is down.
This fixes long-standing problems when changing settings of the adapter.
Discussed in:
https://lists.freebsd.org/pipermail/freebsd-net/2016-June/045509.html
Reported by: Franco Fichtner <franco@opnsense.org>
MFH: 2 days
The variables that are extern in the netmap header file should be
defined in ixl_txrx.c (the file that is included in both ixl(4)/ixlv(4),
not in the main driver source files.
Reported by: ed@, dim@, ngie@
Several files use the internal name of `struct device` instead of
`device_t` which is part of the public API. This patch changes all
`struct device *` to `device_t`.
The remaining occurrences of `struct device` are those referring to the
Linux or OpenBSD version of the structure, or the code is not built on
FreeBSD and it's unclear what to do.
Submitted by: Matthew Macy <mmacy@nextbsd.org> (previous version)
Approved by: emaste, jhibbits, sbruno
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D7447
in GENERIC.
Fixup #ifdef RSS code blocks so that they build and add/delete variables
that were missesd during the creation of this code.
This code is untested and should have a big red warning on it.
Reported by: npn@
MFC after: 2 days
Changes:
Kevin Scott i40e-shared: Save off VSI resource count when updating VSI
Anjali Singhai Jain i40e-shared: Expose some registers to program parser, FD and RSS logic
Eric Joyner ixl: Fix errors in queue interrupt setup in MSIX mode.
Shannon Nelson i40e-shared: implement and use rx ctl helper functions
Shannon Nelson i40e-shared: don't use AQ calls from clear_hw
Eric Joyner ixl: Use rx ctl read/write functions instead of register accesses in certain places.
Shannon Nelson i40e-shared: add adminq commands for rx ctl registers
Shannon Nelson i40e-shared: implement and use rx ctl helper functions
Jeremiah Kyle i40e-shared: Corrected function name in comment block
Deepthi Kavalur i40e-shared: correcting a HW capability display info
Shannon Nelson i40e-shared: fixups for (Linux) upstream consistency
Eric Joyner ixl: Only stop firmware's LLDP agent on older firmware versions.
Differential Revision: https://reviews.freebsd.org/D6211
Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com
MFC after: 2 weeks
Sponsored by: Intel Corporation
Changes by author:
Eric Joyner ixl: Fix compile error when IXL_DEBUG is defined.
Eric Joyner ixl: Fix taskqueues created in init() not being freed in stop().
Eric Joyner ixl: Add additional debug sysctls, for Tx and Rx queue stats.
Eric Joyner ixl: Enable dynamic itr by default.
Eric Joyner ixl: Edit spacing, comments, function signatures (to conform to style(9)).
Eric Joyner ixl: Check for errors when tearing down msix interrupts.
Eric Joyner ixl: Remove unnecessary register reads/writes.
Eric Joyner ixl: Remove admin queue interrupt enable from general interrupt enable.
Eric Joyner ixl: Update switch config after teardown/reset flow in init().
Eric Joyner ixl: Add additional admin queue error code output to admin queue call errors.
Eric Joyner ixl: Don't destroy i40e spinlock if it's already uninitialized.
Shannon Nelson i40e-shared: clean event descriptor before use
Anjali Singhai Jain i40e-shared: When in promisc mode apply promisc mode to Tx Traffic as well
Kevin Scott i40e_shared: Increase timeout when checking GLGEN_RSTAT_DEVSTATE bit
Eric Joyner ixlv: Fix IXL_DEBUG compile issue.
Eric Joyner ixlv: Attempt to fix panic/other issues when rapidly unloading/loading driver.
Eric Joyner ixl/ixlv: Revert m_collapse() in ixl_xmit() to m_defrag().
Deepthi Kavalur i40e_shared: Trace logging HW capabilities
Eric Joyner ixlv: Correctly unlock/relock around init() call in vc_completion().
Eric Joyner ixl: Stop preventing changing flow control mode for CR4 media.
Eric Joyner ixl: Set IPv6 TCP offload flag when doing TSO.
Differential Revision: https://reviews.freebsd.org/D6211
Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com
MFC after: 2 weeks
Sponsored by: Intel Corporation
Changes by author:
Eric Joyner ixl: Add more error messages/checks to ixl_vsi_assign_msix().
Eric Joyner ixl/ixlv: Clarify a comment about descriptors.
Eric Joyner ixl/ixlv: Improve i40e_debug() implementation.
Eric Joyner ixl/ixlv: Remove unused ASSERT() macro; move struct around.
Eric Joyner ixl: Set initial advertised speed value in init_locked().
Eric Joyner ixl: Fix flow control sysctl value being stored when new value is invalid.
Eric Joyner Edit comments and spacing.
Carolyn Wyborny i40e-shared: Add functions to blink led on Coppervale PHY
Eric Joyner ixl: Re-do interrupt setup.
Eric Joyner ixl: Remove VFLR task setup from legacy flow.
Eric Joyner ixl: Shutdown/setup HMC when handling an EMPR reset.
Differential Revision: https://reviews.freebsd.org/D6211
Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com
MFC after: 2 weeks
Sponsored by: Intel Corporation
Changes:
Kiran Patil i40e-shared: APIs to Add/remove port mirroring rules
Shannon Nelson i40e-shared: add VEB stat control and remove L2 cloud filter
Eric Joyner ixl: Update NVM version information shown.
Eric Joyner ixl: Remove empty else block.
Eric Joyner ixl: Slightly re-work ixl_init_msix().
Eric Joyner ixl: Remove duplicate queue enablement.
Shannon Nelson i40e-shared: implement the API function for aq_set_switch_config
Eric Joyner ixl: Update nvm version string shown in sysctl.
Eric Joyner ixl/ixlv: Changes to PF/VF minor version checking/handling.
Eric Joyner ixlv: Reduce maximum wait time for responses to VF AQ messages.
Eric Joyner ixl/ixlv: Edit comments, comment out code, and edit spacing.
Eric Joyner ixl: Print log message when SR-IOV init is successful.
Eric Joyner ixl: Add Tx Flow Control filter from main PF VSI.
Eric Joyner ixlv: Add extra error message when ixlv_get_vf_config times out.
Eric Joyner ixl: Assign current MOCS optics the XLPPI media type.
Eric Joyner ixl: Remove conditional wait after link status event.
Eric Joyner ixl: Add line break and remove extraneous return statement.
Eric Joyner ixl: Allow 40G speeds in the advertise_speed sysctl.
Eric Joyner ixl: Add "CRC enable" field to link_status sysctl output.
Eric Joyner ixl: Move sbuf.h include out of IXL_DEBUG* defines.
Eric Joyner ixl: Move remaining debug sysctl funcs to IXL_DEBUG_SYSCTL define.
Eric Joyner ixl: Add cases for all remaining media types in shared code to media_status().
Differential Revision: https://reviews.freebsd.org/D6211
Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com
MFC after: 2 weeks
Sponsored by: Intel Corporation
Changes:
Shannon Nelson i40e-shared: set shared bit for multicast filters
Piotr Raczynski i40e-shared: Bump AQ minor version for FVL/FPK
Eric Joyner ixl: Remove call to i40e_aq_set_mac_config() in init path.
Eric Joyner ixl: Always add interface mac address to driver+hw filter list.
Eric Joyner ixl: Edit comments.
Eric Joyner ixl: Add more descriptive sysctl help messages.
Eric Joyner ixl: Report more info in link_status sysctl.
Eric Joyner ixl: Flip set_aq_phy_int_mask mask bits.
Differential Revision: https://reviews.freebsd.org/D6211
Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com
MFC after: 2 weeks
Sponsored by: Intel Corporation
Changes by author:
Eric Joyner ixl: Remove substitution of EACCES for EPERM when perrno is set on an nvmupdate command return.
Eric Joyner ixl: Print message when hardware sends GRST interrupt.
Eric Joyner ixl: Fix kernel panic when driver fails to initialize admin queue.
Eric Joyner ixl: Print out messages when a non-handled other interrupt occurs.
Eric Joyner ixl: Fix spaces in a couple messages.
Eric Joyner ixl: Add lock around nvmupd command entry point and reconvert EPERM errors to EACCES.
Anjali Singhai Jain i40e-shared: Make some changes in the nvm read code
Shannon Nelson i40e-shared: AQ Add Run PHY Activity struct
Shannon Nelson i40e-shared: AQ Add Geneve cloud tunnel type
Shannon Nelson i40e-shared: AQ Add external power class to get link status response struct
Shannon Nelson i40e-shared: AQ Add shared resource flags for macvlan filters
Shannon Nelson i40e-shared: AQ Add set_switch_config
Shannon Nelson i40e-shared: AQ Add VXLAN-GPE tunnel type for cloud filter and tunnel commands
Shannon Nelson i40e-shared: AQ thermal sensor control struct
Shannon Nelson i40e-shared: Bump AQ minor version to 1.5 for FVL5 features
Shannon Nelson i40e-shared: add a little more to an NVM update debug message
Carolyn Wyborny i40e-shared: Fix for PHY NVM interaction problem
Eric Joyner i40e-shared: Add prototypes for private NVM write functions
Eric Joyner ixl/ixlv: Remove unused define from ixl.h.
Eric Joyner ixl: Add handling of EMP reset for nvm update purposes.
Eric Joyner ixl: Move addition of device sysctls to separate function.
Eric Joyner ixl: Fix up a couple error messages in ixl_attach().
Eric Joyner ixl: Update the hardware resource allocation debug sysctl.
Differential Revision: https://reviews.freebsd.org/D6211
Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com
MFC after: 2 weeks
Sponsored by: Intel Corporation
Changes by author:
Kamil Krawczyk i40e-shared: use explicit cast from u16 to u8
Anjali Singhai Jain i40e-shared: Add a Virtchnl offload for RSS PCTYPE V2
Eric Joyner ixl: Remove HP device IDs.
Jesse Brandeburg i40e-shared: add small bit of debug
Mitch Williams i40e-shared: check for stopped admin queue
Mitch Williams i40e-shared: set aq count after memory allocation
Jesse Brandeburg i40e-shared: remove forever unused ID
Eric Joyner ixl: Fix bug where RSS does not hash to more than 16 queues.
Shannon Nelson i40e-shared: define function capabilities in only one place
Eric Joyner ixl: Change spacing, comments, and a single error message.
Eric Joyner ixl: Save admin queue phy interrupt mask as a define.
Eric Joyner ixl: Move callout_reset() to later in init_locked(), and stop clearing OACTIVE in driver flags.
Eric Joyner ixl: Add new reset+build flow to init() if it detects that the admin queue is stopped.
Eric Joyner ixl: Return EACCES instead of EPERM when an nvmupdate command fails.
Eric Joyner ixl: Remove KX_A device ID.
Differential Revision: https://reviews.freebsd.org/D6211
Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com
MFC after: 2 weeks
Sponsored by: Intel Corporation
Changes by author:
Helin Zhang i40e_shared: Fix compilation error - pointer-arith
Paul M Stillwell Jr i40e-shared: Replace sprintf with i40e_debug
Anjali Singhai Jain i40e-shared: Fix an accidental error with BIT_ULL replacement
Jesse Brandeburg i40e-shared: remove useless assignments
Anjali Singhai Jain i40e-shared: Add a workaround to drop all flow control frames
Anjali Singhai Jain i40e-shared: Add new response struct from FW for AQ command i40e_aqc_lldp_set_local_mib
Anjali Singhai Jain i40e-shared: Acquire NVM, before issuing an AQ read nvm command
Eric Joyner ixl/ixlv: Remove unused MAX_LOOP define.
Eric Joyner ixl: Remove extra aq_get_link_info() call in attach().
Eric Joyner ixl: Modify a couple error messages in attach() to be more informative.
Eric Joyner ixl: Add i40e_get_link_status() call to init_locked().
Eric Joyner ixl: Move callout_stop() to earlier in ixl_stop().
Eric Joyner ixl: Add extra comments around link ITR code.
Eric Joyner ixl: Attempt to enhance link event handling.
Eric Joyner ixl: Style, spacing, and comment changes.
Eric Joyner ixl: Add I40E_NVM_ACCESS definition.
Eric Joyner ixl: Add interface for nvmupdate tool ioctl to driver.
Eric Joyner ixl: Don't strip out nvm update support from the driver anymore.
Eric Joyner ixl: Interrupts are now allocated/setup and torn down/released on init()/stop().
Differential Revision: https://reviews.freebsd.org/D6211
Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com
MFC after: 2 weeks
Sponsored by: Intel Corporation
Changes by author:
Greg Rose ixl: Add MAC+VLAN filter for LAA MAC assignment
Carolyn Wyborny i40e_shared: fix for PHY NVM interaction problem
Anjali Singhai Jain i40e-shared: Fix an accidental error with BIT_ULL replacement
Eric Joyner ixl: Fix potential crash when loading driver a startup and cannot setup all requested MSIX vectors.
Eric Joyner ixl: Add max of 8 queues limit to autoconfig.
Eric Joyner ixl: Re-add ian@'s sysctl fixes from upstream (r280043).
Differential Revision: https://reviews.freebsd.org/D6211
Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com
MFC after: 2 weeks
Sponsored by: Intel Corporation
This first update will revert some upstream changes; forthcoming updates will reinstate them.
Changes, by author:
Anjali Singhai Jain i40e-shared: Add WB_ON_ITR offload support
Shannon Nelson i40e-shared: fix phy_types bitmap type
Kevin Scott i40e-shared: Store off PHY capabilities
Shannon Nelson i40e-shared: fix byteswap of phy_type
Jingjing Wu i40e-shared: Fix compile issue related to const string
Greg Bowers i40e-shared: Add AQ defines for non-willing Apps (DCB)
Greg Bowers i40e-shared: Support for non-willing Apps (DCB)
Shannon Nelson i40e-shared: use upper-32 bit macro for address
Shannon Nelson i40e-shared: grab the AQ spinlocks before clearing registers
Eric Joyner ixl: Properly strip out X722_SUPPORT (temporarily).
Eric Joyner ixl: Allow Fort Pond devices to advertise 100M in set_advertise sysctl.
Differential Revision: https://reviews.freebsd.org/D6211
Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com
MFC after: 2 weeks
Sponsored by: Intel Corporation
And factor out tcp_lro_rx_done, which deduplicates the same logic with
netinet/tcp_lro.c
Reviewed by: gallatin (1st version), hps, zbb, np, Dexuan Cui <decui microsoft com>
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5725
- Limit queue autoconfiguration to 8 queues to prevent the driver from
requesting a large number of MSI-X vectors at boot.
- Fix potential kernel panic that occurs when the driver loads and cannot
get all requested MSIX vectors. Instead, attach() will fail with an error.
- Move taskqueue setup to later in attach() to prevent having to free
taskqueues if some other error in attach() occurs.
Differential Revision: https://reviews.freebsd.org/D5205
MFC after: 1 month
Tested by: jeffrey.e.pieper@intel.com
Sponsored by: Intel Corporation
The m_collapse() call would fail when transmitting medium-sized packets
when the interface mtu was set to 9000, so revert back to m_defrag(),
which does not fail.
Differential Revision: https://reviews.freebsd.org/D5207
Tested by: jeffrey.e.pieper@intel.com
Sponsored by: Intel Corporation
- I40E_PFINT_DYN_CTLN needs to be cleared, and not have a queue index
written to it.
- The interrupt linked list for each queue is changed to only include
the queue's Rx and Tx queues.
Differential Revision: https://reviews.freebsd.org/D5206
Reviewed by: sbruno
Tested by: jeffrey.e.pieper@intel.com
Sponsored by: Intel Corporation
- Change tc_mapping field to assign 64 queues instead of 16 to the PF's VSI;
add comments to describe how this is done.
- Set hash lut size to 512 when setting filter control; the lut size defaults
to 128 if this isn't set.
Differential Revision: https://reviews.freebsd.org/D5203
Reviewed by: gallatin
Tested by: jeffrey.e.pieper@intel.com
Sponsored by: Intel Corporation
