riscv cores.
GFE cores come with standard DTS file that lacks standard 'dmas ='
property, which means xae(4) could not find a DMA controller to use.
The 'dmas' property could not be added to the DTS file because the
ethernet controller and DMA engine parts in Linux are implemented
in a single driver.
Instead of 'dmas' property the standard Xilinx 'axistream-connected'
property is provided, so fallback to use it instead.
Suggested by: James Clarke <jrtc27@jrtc27.com>
Reviewed by: James Clarke <jrtc27@jrtc27.com>
Sponsored by: DARPA, AFRL
in the sysctl block for the driver. mpsutil/mprutil needs this so it can
know how big of a buffer to allocate when requesting the IOCFacts from the
controller. This eliminates the kernel console messages about wrong
allocation sizes.
Reported by: imp
BIO_READ and BIO_WRITE, we've handled this expanded syntax poorly in
drivers when the driver doesn't support a particular command. Do a
sweep and fix that.
Reported by: imp
- Use a constant for the offset instead of a magic number.
- Use an addi instruction that writes to tp directly instead of a mv
that writes the result of a compiler-generated addi.
Reviewed by: mhorne
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23521
This was relatively harmless but surprising to see in counters. The
race occurred when rd_seq was read after the goal was updated and we
incorrectly calculated the delta between them.
Reviewed by: rlibby
Differential Revision: https://reviews.freebsd.org/D23464
Recent network epoch changes have left some drivers unexpectedly broken
and there is not yet a consensus on the correct fix. This is patch is
a minor performance impact until we can agree on the correct path
forward.
Reviewed by: core, network, imp, glebius, hselasky
Differential Revision: https://reviews.freebsd.org/D23515
Previous code used 4 atomics to do aggsum_flush_bucket() and 2 more to
re-borrow after the flush. But since asc_borrowed and asc_delta are
accessed only while holding asc_lock, it makes no any sense to modify
as_lower_bound and as_upper_bound in multiple steps. Instead of that
the new code uses only 2 atomics in all the cases, one per as_*_bound
variable. I think even that is overkill, simple atomic store and
load could be used here, since all modifications are done under the
as_lock, but there are no such primitives in ZFS code now.
While there, make borrow code consider previous borrow value, so that
on mixed request patterns reduce chance of needing to borrow again if
much larger request follows tiny one that needed borrow.
Also reduce as_numbuckets from uint64_t to u_int. It makes no sense
to use so large division operation on every aggsum_add().
Reviewed by: Brian Behlendorf, Paul Dagnelie
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
- Mention bootconfig target in TARGETS section.
- Document PARTITIONS variable, which is only mentioned in the examples,
but doesn't have its own point.
Submitted by: arrowd@
Reviewed by: bcr
Approved by: bcr (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D22927
counters. In my stress test there is only one poll for every 15,000
frees. This means we are effectively amortizing the cache coherency
overhead even with very high write rates (3M/s/core).
Reviewed by: markj, rlibby
Differential Revision: https://reviews.freebsd.org/D23463
The RCSID data was wrong, so this is effectively a record-only merge
with correction of said data. No further changes should be needed in this
area, as we've now upstreamed our local changes to this specific test.
Always use the kdb_thr_ctx() for db_trace_thread() as on other
architectures. Initialize pcb_ra to be the sepc from the saved
trapframe rather than the saved ra to avoid skipping a frame.
Reviewed by: mhorne, br
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23513
While here, add an extra line of information for exceptions and
interrupts and compress the per-frame line down to one line to match
other architectures.
Reviewed by: mhorne, br
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23508
After committing, I noticed elf2aout commit missed the relnotes
yes. It's unlikely to be interesting, since it's just part of sparc64
removal and quite niche, but it was installed on all FreeBSD machines.
Remove the long obsolete elf2aout utility. Should any ports need to
know when this left the tree, use 1300077 as the revision so we
avoid multiple bumps for the sparc64 removal.
Reviewed by: brooks@, emaste@
Differential Revision: https://reviews.freebsd.org/D23527
Only sparc64 used this, so we will be removing it from FreeBSD 13. Add
the usual deprecation notice in a MFC-able way.
Reviewed by: emaste, rgrimes
Differential Revision: https://reviews.freebsd.org/D23526
It was only built on sparc64. Since it wasn't a general tool on other
architectures, no need to keep it around for another release.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D23524
I was overly agressive about removing the entire comment. It was still
valid, except the part about being only for some architectures.
Reviewed by: emaste
Differenial Revision: https://reviews.freebsd.org/D23523
The set_empty_value test has a cleanup function, but is not called.
Fix it
Reviewed by: 0mp
Approved by: kp
Differential Revision: https://reviews.freebsd.org/D23498
Use of binutils is being incrementally reduced. The specific binutils
are listed in the WITH_BINUTILS and WITHOUT_BINUTILS descriptions; there
is no need to list the specific tools again in the descriptions for the
_BOOTSTRAP options.
MFC after: 1 week
Currently the Xen console is always attached with priority CN_REMOTE
(highest), which means that when booting with a single console the Xen
console will take preference over the VGA for example, and that's not
intended unless the user has also selected to use a serial console.
Fix this by lowering the priority of the Xen console to NORMAL unless
the user has selected to use a serial console. This keeps the usual
FreeBSD behavior of outputting to the internal consoles (ie: VGA) when
booted as a Xen dom0.
MFC after: 3 days
Sponsored by: Citrix Systems R&D
This change adds a new libkvm function, kvm_kerndisp(), that can be used to
retrieve the kernel displacement, that is the difference between the kernel's
base virtual address at run time and the kernel base virtual address specified
in the kernel image file.
This will be used by kgdb, to properly relocate kernel symbols, when needed.
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D23285
Add CTLFLAG_NEEDGIANT flag (modelled after D_NEEDGIANT) that will be used to
mark sysctls that still require locking Giant.
Rewrite sysctl_handle_string() to use internal locking instead of locking
Giant.
Mark SYSCTL_STRING, SYSCTL_OPAQUE and their variants as MPSAFE.
Add infrastructure support for enforcing proper use of CTLFLAG_NEEDGIANT
and CTLFLAG_MPSAFE flags with SYSCTL_PROC and SYSCTL_NODE, not enabled yet.
Reviewed by: kib (mentor)
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D23378
It's faster and more reliable to wait_for_pids than to sleep 1.
cem@ suggested just to remove auditd_stop() and use the rc.subr default
stop action (SIGTERM instead of audit -t), which has a built-in
wait_for_pids. That may be a better solution.
Discussed with: cem
Reviewed by: asomers
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D23223
UMA_ZFLAG_CACHEONLY was essentially the same thing as UMA_ZONE_VM, but
with a more confusing name. Remove the flag, make UMA_ZONE_VM an
inherit flag, and replace all references.
Reviewed by: markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D23516
We somewhat blindly copy the srr1 from the new context to the trap frame,
but disable FPU and VSX unconditionally, relying on the trap to re-enable
them. This works because the FPU manages the VSX extended FP registers,
which is governed by the PCB_FPFREGS flag. However, with altivec, we
would blindly disable PSL_VEC, without touching PCB_VEC. Handle this case
by disabling altivec in both srr1 and pcb_flags, if the mcontext doesn't
have _MC_AV_VALID set.
Reported by: pkubaj
This means that extra virtual interfaces (VIs) created with
hw.cxgbe.num_vis are no longer required to use netmap. Use this
tunable to enable native netmap support on the main interface:
hw.cxgbe.native_netmap="3"
There is no change in default behavior.
Suggested by: jch@
MFC after: 2 weeks
Sponsored by: Chelsio Communications
In legacy VirtIO drivers, the header must be PCI endianness (little) and the
device-specific region is encoded in the native endian of the guest.
This patch makes the access (read/write) to VirtIO header using the little
endian order. Other read and write access are native endianness. This also
sets the device's IO region as big endian if on big endian machine.
PR: 205178
Submitted by: Andre Silva <afscoelho@gmail.com>
Reported by: Kenneth Salerno <kennethsalerno@yahoo.com>
Reviewed by: bryanv, bdragon, luporl, alfredo
Approved by: jhibbits (mentor)
Differential Revision: https://reviews.freebsd.org/D23401
While cause codes higher than 16 are reserved, the exception code
field of the register is defined to be all bits but the upper-most
bit.
Reviewed by: mhorne
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23510
While here, remove a local variable to avoid the CSR read in non-debug
kernels.
Reviewed by: mhorne
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23511
In practice this discarded all characters entered at the DDB prompt.
Reviewed by: br
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23509
libssp_nonshared.a defines one symbol, __stack_chk_fail_local. This
is used only on i386 and powerpc; other archs emit calls directly to
__stack_chk_fail. Simplify linking on other archs by omitting it.
PR: 242941 [exp-run]
This fixes continuing from debug.kdb.enter=1 after enabling the use of
compressed instructions since the compiler can emit the two byte
c.ebreak instead of the 4 byte ebreak.
Reviewed by: br
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23507
PPC64 ELFv2 acts like a "normal" platform in that it no longer needs
function descriptors. So, ensure we are only enabling them on ELFv1.
Additionally, ELFv2 requires that the ELF header have a nonzero e_flags,
so ensure that the synthesized ELF header in dt_link.c is setting it.
Reviewed by: jhibbits, markj
Approved by: gnn
Differential Revision: https://reviews.freebsd.org/D22403
