directory.
Add a quick sanity check to objdir before using it. It must start
with /. If there was a make error getting it, report that and continue
with the next target. If there was anything else, bail out.
Due to the way claiming works, we need to ensure on AIM OFW machines that
we don't have overlapping ranges on any step of the load.
Load boot1.elf at 0x38000 so it will not overlap with anything even if the
entire PReP partition gets loaded by OFW.
Tested on an iBook G4, a PowerBook G4, a PowerMac G5, and qemu pseries.
(qemu pseries is broken without this patch due to the high address used
by lld10.)
Reviewed by: adalava
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D24623
Previously procctl(PROC_PROTMAX_STATUS, ... used the PROC_ASLR_NOFORCE
macro for the "system-wide configured policy" status, instead of
PROC_PROTMAX_NOFORCE.
They both have a value of 3, so no functional change.
Sponsored by: The FreeBSD Foundation
- Inconsistencies in .Dd like abbreviated month names,
"th" after numbers, or leading zeros
- No line breaks after a sentence stop
- Whitespace at the end of the line
- Use macros for BSD OS names instead of hardcoded names
- CAVEATS instead of CAVEAT in section name
No actual content change in terms of additions were made, so
no bump of the .Dd for these man pages.
All of these issues were found and fixed by Gordon Bergling.
Submitted by: gbergling_gmail.com
Approved by: bcr
Differential Revision: https://reviews.freebsd.org/D24648
Now that RISC-V support has landed in qemu-user-static, add to the list
of examples in the binmiscctl(8) manpage.
Reviewed by: kevans
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D24646
Factoring some of the code in nfsm_dissct() out into separate functions
allows these functions to be used elsewhere in the NFS mbuf handling code.
Other uses of these functions will be done in future commits.
It also makes it easier to add support for ext_pgs mbufs, which is needed
for nfs-over-tls under development in base/projects/nfs-over-tls.
Although the algorithm in nfsm_dissct() is somewhat re-written by this
patch, the semantics of nfsm_dissct() should not have changed.
This option was added as a transition aide when symbol versioning was
first added. It was enabled by default in 2007 and is supported even
by the old GPLv2 binutils. Trying to disable it currently fails to
build in libc and at this point it isn't worth fixing the build.
Reported by: Michael Dexter
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D24637
- maxio should be dp->d_maxsize. This is often MAXPHYS, but not always
(especially if MAXPHYS is > 1MB).
- Unlock the periph before returning. We don't need to relock it to
release the ccb.
- Make sure we release the ccb in error paths.
Reviewed by: cperciva
The previous interface was pretty bad, and required the caller to get some
implementation details correct that it really shouldn't need to (e.g.
loader_conf_files handling) and pass in an empty table for it to use.
The new and much improved interface, readConf, is much less of a hack;
hiding these implementation details and just doing the right thing.
config.lua will now use it to process /boot/defaults/loader.conf and the
subsequent loader_conf_files from there, and read-conf will also use it.
This improvement submitted by Olivier (cited below), loader_conf_files
handling from the original patch was changed to just clobber it before
processing and not bother restoring it after the fact following r360505
where it's now guaranteed to evade the loader environment.
PR: 244640
Submitted by: Olivier Certner (olivier freebsd free fr>
This new table should be used for transient values that don't need to end up
in the loader environment. Generally, these will be things that are internal
details that really aren't needed or interesting outside of the config
module (e.g. if we changed how ${module}_* directives work, they might use
this instead).
To start, populate it with loader_conf_files. Any specific value of
loader_conf_files isn't all that interesting; if we're going to export it,
we should really instead export a loader_conf_files that indicates all of
the configuration files we processed. This will be used to reduce
bookkeeping overhead in a future commit that cleans up readConfFiles.
A number of components require OpenSSL and fail to build if it is not
enabled. As a first phase force these off under WITHOUT_OPENSSL. A
second phase should make these more fine-grained, allowing the component
to build but without OpenSSL.
PR: 245931
Sponsored by: The FreeBSD Foundation
With a length of 16, the name ("<if name>:TX(<qid>):callout") typically
gets truncated.
PR: 245712
Reported by: ghuckriede@blackberry.com
MFC after: 1 week
Gordon Bergling. Hook it up to the build by adding
it to the Makefile.
Submitted by: gbergling_gmail.com
Approved by: bcr
Differential Revision: https://reviews.freebsd.org/D24589
epoch(9).
In one instance, remove a trailing whitespace while here.
Submitted by: gbergling_gmail.com
Approved by: bcr
Differential Revision: https://reviews.freebsd.org/D24243
Running TCP Cubic together with ECN could end up reducing cwnd down to 1 byte, if the
receiver continously sets the ECE flag, resulting in very poor transmission speeds.
In line with RFC6582 App. B, a lower bound of 2 MSS is introduced, as well as a typecast
to prevent any potential integer overflows during intermediate calculation steps of the
adjusted cwnd.
Reported by: Cheng Cui
Reviewed by: tuexen (mentor)
Approved by: tuexen (mentor)
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D23353
A future change in lualoader may take some liberties with the
loader_conf_files in the name of efficiency; namely, it may start omitting
it from the loader environment entirely so that it doesn't need to worry
about maintaining any specific value.
This variable has historically been incredibly volatile anyways, as it may
get set to completely different values in any given configuration file to
trigger a load of more files.
Document now that we may not maintain it in the future, but perhaps we'll
reserve the right to change our minds and eventually formally export all of
the loader configuration files that were read using this variable.
MFC after: 3 days
With these two ioctls implemented in the nda driver, nvmecontrol now
works with nda just like it does with nvd. It eliminates the need to
jump through odd hoops to get this data.
Add the nvmeX device to the XPT_PATH_INQ nvme specific
information. while one could figure this out by looking up the
domain🚌slot:function, it's a lot easier to have the SIM set it
directly since the sim knows this.
which can cause a TCP client to use invalid or stale TCP sequence numbers for ACK packets.
Packets with old sequence numbers are ignored and not used to update the send window size.
This might cause the TCP session to hang indefinitely under some circumstances.
Reported by: Cui Cheng
Reviewed by: tuexen (mentor), rgrimes (mentor)
Approved by: tuexen (mentor), rgrimes (mentor)
MFC after: 3 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D24515
Continue routing subsystem conversion to nhop objects defined in r359823.
Use fields from nhop structure instead of "struct rtentry" fields.
This is one of the last changes prior to removing rt_ifp, rt_ifa,
rt_gateway and rt_mtu from struct rtentry.
Differential Revision: https://reviews.freebsd.org/D24609
by not including the SYN bit sequence space in cwnd related calculations.
Snd_und is adjusted explicitly in all cases, outside the cwnd update, instead.
This fixes an off-by-one conformance issue with regular TCP sessions not
using Appropriate Byte Counting (RFC3465), sending one more packet during
the initial window than expected.
PR: 235256
Reviewed by: tuexen (mentor), rgrimes (mentor)
Approved by: tuexen (mentor), rgrimes (mentor)
MFC after: 3 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D19000
With the upcoming multipath changes described in D24141,
rt->rt_nhop can potentially point to a nexthop group instead of
an individual nhop.
To simplify caller handling of such cases, change ifa_rtrequest() callback
to pass changed nhop directly.
Differential Revision: https://reviews.freebsd.org/D24604
Openfirmare enumerates and installs the driver for all processors,
regardless of whether they will be started later (because of power
constrains for example).
MFC after: 3 weeks
Clang10 may use FPU instructions for optimizing operations with
memory blocks. But we don't want to do lengthy save/restore of all
FPU registers across each rtld_start() call.
MFC after: 3 week
Don't set initial voltage for regulators having their voltage already
in allowed range. As side effect of this change, we don't try to set
initial voltage for fixed voltage regulators - these don't have impemented
voltage set method so their initialization has always failed.
MFC after: 3 weeks
- always initialize selector of voltage signaling standard.
Various versions of U-boot leaves voltage signaling standard settings
for PMUIO2 domain in different state. Always initialize it
into expected state.
- start the driver as early as possible, the IO domains should be
initialized before other drivers are attached.
- rename RK3399 register to its name founds in TRM.
This is the second part of fixes for serial port corruption observed after
DT 5.6 import.
Reviewed by: manu
MFC after: 1 week
We do not want to support bootstrapping lua modules, so ensure that
require will fail by providing a nonexistent path.
Reviewed by: kevans
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24610
