and utf8_to_ucs2, be sure to NULL out the return pointer too, rather
than return a pointer to free memory.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D13917
r314467 introduced hw.usb.wsp.enable_single_tap_clicks to enable/disable
single-tap left click behavior. Update the man page to reflect the new
sysctl.
PR: 196624
MFC after: 3 days
X-MFC-With: r314467
Focus on code where we are doing multiplications within malloc(9). None of
these ire likely to overflow, however the change is still useful as some
static checkers can benefit from the allocation attributes we use for
mallocarray.
This initial sweep only covers malloc(9) calls with M_NOWAIT. No good
reason but I started doing the changes before r327796 and at that time it
was convenient to make sure the sorrounding code could handle NULL values.
Differential revision: https://reviews.freebsd.org/D13837
Focus on code where we are doing multiplications within malloc(9). None of
these ire likely to overflow, however the change is still useful as some
static checkers can benefit from the allocation attributes we use for
mallocarray.
This initial sweep only covers malloc(9) calls with M_NOWAIT. No good
reason but I started doing the changes before r327796 and at that time it
was convenient to make sure the sorrounding code could handle NULL values.
X-Differential revision: https://reviews.freebsd.org/D13837
Focus on code where we are doing multiplications within malloc(9). None of
these ire likely to overflow, however the change is still useful as some
static checkers can benefit from the allocation attributes we use for
mallocarray.
This initial sweep only covers malloc(9) calls with M_NOWAIT. No good
reason but I started doing the changes before r327796 and at that time it
was convenient to make sure the sorrounding code could handle NULL values.
X-Differential revision: https://reviews.freebsd.org/D13837
Focus on code where we are doing multiplications within malloc(9). None of
these ire likely to overflow, however the change is still useful as some
static checkers can benefit from the allocation attributes we use for
mallocarray.
This initial sweep only covers malloc(9) calls with M_NOWAIT. No good
reason but I started doing the changes before r327796 and at that time it
was convenient to make sure the sorrounding code could handle NULL values.
X-Differential revision: https://reviews.freebsd.org/D13837
Focus on code where we are doing multiplications within malloc(9). None of
these ire likely to overflow, however the change is still useful as some
static checkers can benefit from the allocation attributes we use for
mallocarray.
This initial sweep only covers malloc(9) calls with M_NOWAIT. No good
reason but I started doing the changes before r327796 and at that time it
was convenient to make sure the sorrounding code could handle NULL values.
X-Differential revision: https://reviews.freebsd.org/D13837
Focus on code where we are doing multiplications within malloc(9). None of
these ire likely to overflow, however the change is still useful as some
static checkers can benefit from the allocation attributes we use for
mallocarray.
This initial sweep only covers malloc(9) calls with M_NOWAIT. No good
reason but I started doing the changes before r327796 and at that time it
was convenient to make sure the sorrounding code could handle NULL values.
X-Differential revision: https://reviews.freebsd.org/D13837
Focus on code where we are doing multiplications within malloc(9). None of
these ire likely to overflow, however the change is still useful as some
static checkers can benefit from the allocation attributes we use for
mallocarray.
This initial sweep only covers malloc(9) calls with M_NOWAIT. No good
reason but I started doing the changes before r327796 and at that time it
was convenient to make sure the sorrounding code could handle NULL values.
X-Differential revision: https://reviews.freebsd.org/D13837
Focus on code where we are doing multiplications within malloc(9). None of
these ire likely to overflow, however the change is still useful as some
static checkers can benefit from the allocation attributes we use for
mallocarray.
This initial sweep only covers malloc(9) calls with M_NOWAIT. No good
reason but I started doing the changes before r327796 and at that time it
was convenient to make sure the sorrounding code could handle NULL values.
X-Differential revision: https://reviews.freebsd.org/D13837
Focus on code where we are doing multiplications within malloc(9). None of
these ire likely to overflow, however the change is still useful as some
static checkers can benefit from the allocation attributes we use for
mallocarray.
This initial sweep only covers malloc(9) calls with M_NOWAIT. No good
reason but I started doing the changes before r327796 and at that time it
was convenient to make sure the sorrounding code could handle NULL values.
X-Differential revision: https://reviews.freebsd.org/D13837
Focus on code where we are doing multiplications within malloc(9). None of
these ire likely to overflow, however the change is still useful as some
static checkers can benefit from the allocation attributes we use for
mallocarray.
This initial sweep only covers malloc(9) calls with M_NOWAIT. No good
reason but I started doing the changes before r327796 and at that time it
was convenient to make sure the sorrounding code could handle NULL values.
X-Differential revision: https://reviews.freebsd.org/D13837
Focus on code where we are doing multiplications within malloc(9). None of
these ire likely to overflow, however the change is still useful as some
static checkers can benefit from the allocation attributes we use for
mallocarray.
This initial sweep only covers malloc(9) calls with M_NOWAIT. No good
reason but I started doing the changes before r327796 and at that time it
was convenient to make sure the sorrounding code could handle NULL values.
X-Differential revision: https://reviews.freebsd.org/D13837
When the fsck_ffs program cannot fully repair a file system, it will
output the message PLEASE RERUN FSCK. However, it does not exit with a
non-zero status in this case (contradicting the man page claim that it
"exits with 0 on success, and >0 if an error occurs." The fsck
rc-script (when running "fsck -y") tests the status from fsck (which
passes along the exit status from fsck_ffs) and issues a "stop_boot"
if the status fails. However, this is not effective since fsck_ffs can
return zero even on (some) errors. Effectively, it is left to a later
step in the boot process when the file systems are mounted to detect
the still-unclean file system and stop the boot.
This change modifies fsck_ffs so that when it cannot fully repair the
file system and issues the PLEASE RERUN FSCK message it also exits
with a non-zero status.
While here, the fsck_ffs man page has also been updated to document
the failing exit status codes used by fsck_ffs. Previously, only exit
status 7 was documented. Some of these exit statuses are tested for in
the fsck rc-script, so they are clearly depended upon and deserve
documentation.
Reviewed by: mckusick, vangyzen, jilles (manpages)
MFC after: 1 week
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D13862
[LV] Don't call recordVectorLoopValueForInductionCast for
newly-created IV from a trunc.
Summary:
This method is supposed to be called for IVs that have casts in their
use-def chains that are completely ignored after vectorization under
PSE. However, for truncates of such IVs the same InductionDescriptor
is used during creation/widening of both original IV based on PHINode
and new IV based on TruncInst.
This leads to unintended second call to
recordVectorLoopValueForInductionCast with a VectorLoopVal set to the
newly created IV for a trunc and causes an assert due to attempt to
store new information for already existing entry in the map. This is
wrong and should not be done.
Fixes PR35773.
Reviewers: dorit, Ayal, mssimpso
Reviewed By: dorit
Subscribers: RKSimon, dim, dcaballe, hsaito, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D41913
This should fix "Vector value already set for part" assertions when
building the net/iodine and sysutils/daa2iso ports.
Reported by: jbeich
PR: 224867,224868
utf8_to_ucs2 in boot1.efi. We need to initialise the ucs2 output string
so it will allocate space, and use the return value to determine if the
call was successful.
Reviewed by: imp
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D13915
New common routines were added to kern/subr_clock.c for converting between
calendrical time expressed in BCD and struct timespec. The new functions
return EINVAL on error, as expected when the clock hardware does not provide
valid time.
PR: 224813
Differential Revision: https://reviews.freebsd.org/D13731 (no reviewers)
to which it is specific, rather than in the generic AIM startup code. This
will be required to support the radix-table-based MMU introduced with POWER9.
Ths change consists of two parts.
geom_disk: deny opening a disk for writing if it's marked as
write-protected. A new disk(9) flag is added to mark write protected
disks. A possible alternative could be to add another parameter to d_open,
so that the open mode could be passed to it and the disk drivers could
make the decision internally, but the flag required less churn.
scsi_da: add a new phase of disk probing to query the all pages mode
sense page. We can determine if the disk is write protected using bit 7
of the device specific field in the mode parameter header returned by
MODE SENSE.
PR: 224037
Reviewed by: mav
MFC after: 4 weeks
Differential Revision: https://reviews.freebsd.org/D13360
buffers into a new pmap-module function pmap_map_user_ptr() that can
be implemented by the respective modules. This is required to implement
non-segment-based AIM-ish MMU systems such as the radix-tree page tables
introduced by POWER ISA 3.0 and present on POWER9.
Reviewed by: jhibbits
If fdt_overlay_apply fails at some stage to apply the overlay to the base,
both the base and overlay may be in an inconsistent state (some fixups
applied, some phandles adjusted, some symbols merged). These can be bad for
a number of reasons, to include user frustration if some fixups applied and
not others. Fail a little safer by making a clean copy of the base FDT for
every overlay that we can simply discard if things go awry.
This also allows us the luxury of simply discarding overlays if we hit some
kind of memory limit or if they're malformed and extremely large for some
reason. We'll now leave a nice error message indicating that some overlays
could not be applied due to size restrictions and we apply what we can.
I note that our overlay implementation has some flaws that might still leave
your system in an unbootable state even if an overlay applies correctly;
please exercise caution in using overlays until we can swap it out for
libfdt's implementation.
Tested on: BananaPi-M3 (armv7)
Tested on: Pine64 (aarch64)
Differential Revision: https://reviews.freebsd.org/D13709
- Add a per compatible configuration struct
- Not all SoC uses the same size for DMA transfert, add this into the
configuration data
- Use new timing mode for some SoC (A64 mmc)
- Auto calibrate clock for A64 mmc/emmc
- A64 mmc controller need masking of data0
- Add support for vmmc/vqmmc regulator
- Add more capabilities, r/w speed is better for eMMC
- MMC_CAP_SIGNALING_180 gives weird result so do not enable it for now.
- Add new register documented in H3/A64 user manual
Tested-On: Pine64-LTS (A64), eMMC still doesn't work
Tested-On: A64-Olinuxino (A64), sd and eMMC are working
Tested-On: NanoPi Neo Plus2 (H5), sd and eMMC are working
Tested-On: OrangePi PC2 (H5), sd only (no eMMC)
Tested-On: OrangePi One (H3), sd only (no eMMC)
Tested-On: BananaPi M2 (A31s), sd only (no eMMC)
RTC clock hardware frequently uses BCD numbers. Currently the low-level
bcd2bin() and bin2bcd() functions will KASSERT if given out-of-range BCD
values. Every RTC driver must implement its own code for validating the
unreliable data coming from the hardware to avoid a potential kernel panic.
This change introduces two new functions, clock_bcd_to_ts() and
clock_ts_to_bcd(). The former validates its inputs and returns EINVAL if any
values are out of range. The latter guarantees the returned data will be
valid BCD in a known format (4-digit years, etc).
A new bcd_clocktime structure is used with the new functions. It is similar
to the original clocktime structure, but defines the fields holding BCD
values as uint8_t (uint16_t for year), and adds a PM flag for handling hours
using AM/PM mode.
PR: 224813
Differential Revision: https://reviews.freebsd.org/D13730 (no reviewers)
previous behavior is preserved (the CG checksum is fixed). We're just
noisy about it now.
Reviewed by: kirk@
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D13884
