Occasionally poll for signals during large reads of the /dev/u?random
devices. This allows cancellation via SIGINT of accidental invocations of
very large reads. (A 2GB /dev/random read, which takes about 10 seconds on
my 2017 AMD Zen processor, can be aborted.)
I believe this behavior was intended since 2014 (r273997), just not fully
implemented.
This is motivated by a potential getrandom(2) interface that may not
explicitly forbid extremely large reads on 64-bit platforms -- even larger
than the 2GB limit imposed on devfs I/O by default. Such reads, if they are
to be allowed, should be cancellable by the user or administrator.
Reviewed by: delphij
Approved by: secteam (delphij)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14684
Make some small improvements to the efirtc driver by obtaining the clock
capabilities (resolution and whether the sub-second counters are reset) and
using the info when registering the clock. When the hardware zeroes out the
subsecond info on clock-set, schedule clock updates to happen just before
top-of-second, so that the RTC time is closely in-sync with kernel time.
Also, in the identify() routine, always add the driver if EFI runtime
services are available, then decide in probe() whether to attach the driver
or not. If not attaching and bootverbose is on, say why. All of this is
basically to avoid "silent failure" -- if someone thinks there should be an
efi rtc and it's not attaching, at least they can set bootverbose and maybe
get a clue from the output.
Differential Revision: https://reviews.freebsd.org/D14565 (timed out)
[CodeGen] Fix TBAA info for accesses to members of base classes
Resolves:
Bug 35724 - regression (r315984): fatal error: error in backend:
Broken function found (Did not see access type in access path!)
https://bugs.llvm.org/show_bug.cgi?id=35724
Differential Revision: https://reviews.llvm.org/D41547
This fixes "Did not see access type in access path" fatal errors when
building the devel/gdb port (version 8.1).
Reported by: jbeich
PR: 226658
MFC after: 3 months
X-MFC-With: r327952
[ConstantFolding, InstSimplify] Handle more vector GEPs
This patch addresses some additional cases where the compiler crashes
upon encountering vector GEPs. This should fix PR36116.
Differential Revision: https://reviews.llvm.org/D44219
Reference: https://bugs.llvm.org/show_bug.cgi?id=36116
This fixes an assertion when building the emulators/snes9x port.
Reported by: jbeich
PR: 225471
MFC after: 3 months
X-MFC-With: r327952
net.inet6.ip6.v6only=0.
Without this patch, the inp_vflag would have INP_IPV4 and the
INP_IPV6 flags for accepted TCP/IPv6 connections if the sysctl
variable net.inet6.ip6.v6only is 0. This resulted in netstat
to report the source and destination addresses as IPv4 addresses,
even they are IPv6 addresses.
PR: 226421
Reviewed by: bz, hiren, kib
MFC after: 3 days
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D13514
Three copies of the linuxulator linux_sysvec.c contained identical
BSD to Linux errno translation tables, and future work to support other
architectures will also use the same table. Move the table to a common
file to be used by all. Make it 'const int' to place it in .rodata.
(Some existing Linux architectures use MD errno values, but x86 and Arm
share the generic set.)
This change should introduce no functional change; a followup will add
missing errno values.
MFC after: 3 weeks
Sponsored by: Turing Robotic Industries Inc.
Differential Revision: https://reviews.freebsd.org/D14665
Two copies of chacha20 were imported into the tree on Apr 15 2017 (r316982)
and Apr 16 2017 (r317015). Only the latter is actually used by anything, so
just go ahead and garbage collect the unused version while it's still only
in CURRENT.
I'm not making any judgement on which implementation is better. If I pulled
the wrong one, feel free to swap the existing implementation out and replace
it with the other code (conforming to the API that actually gets used in
randomdev, of course). We only need one generic implementation.
Sponsored by: Dell EMC Isilon
On some systems, we're getting timeouts when we use multiple queues on
drives that work perfectly well on other systems. On a hunch, Jim
Harris suggested I poll the completion queue when we get a timeout.
This patch polls the completion queue if no fatal status was
indicated. If it had pending I/O, we complete that request and
return. Otherwise, if aborts are enabled and no fatal status, we abort
the command and return. Otherwise we reset the card.
This may clear up the problem, or we may see it result in lots of
timeouts and a performance problem. Either way, we'll know the next
step. We may also need to pay attention to the fatal status bit
of the controller.
PR: 211713
Suggested by: Jim Harris
Sponsored by: Netflix
This allows compatibility translation to take place on the stack
(md_ioctl is too big) and is more suitable as a public interface within
the kernel than the kern_ioctl interface.
Except for the initialization of the md_req from the md_ioctl
(including detection of kernel md_file pointers) and the updating
of the md_ioctl prior to return, this is a mechanical replacment
of md_ioctl and mdio with md_req and mdr.
Reviewed by: markj, cem, kib (assorted versions)
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14704
vmd_free_count manipulation. Reduce the scope of the free lock by
using a pageout lock to synchronize sleep and wakeup. Only trigger
the pageout daemon on transitions between states. Drive all wakeup
operations directly as side-effects from freeing memory rather than
requiring an additional function call.
Reviewed by: markj, kib
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14612
r328013 introduced a new error code from fsck_ffs that indicates that
it could not completely fix the file system; this happens when it
prints the message PLEASE RERUN FSCK. However, this status can happen
when fsck is run in "preen" mode and the rc.d/fsck script does not
handle that error code. Modify rc.d/fsck so that if "fsck -p"
("preen") returns the new status code (16) it will run "fsck -y", as
it currently does for a status code of 8 (the "standard error exit").
Reported by: markj
Reviewed by: mckusick, markj, ian, rgrimes
MFC after: 3 days
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D14679
Move locks from outside ioctl to the individual implementations.
This is the first step of changing the implementations to act on a
kernel-internal request struct rather than on struct md_ioctl and to
removing the use of kern_ioctl in mountroot.
Reviewed by: cem, kib, markj (prior version)
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14700
The crash scenario goes like this: there's a thread waiting on "reinstate";
because it doesn't update the timeout counter it gets terminated by the
callout; at this point the maintenance thread starts the termination routine.
The first thread finishes waiting, proceeds to icl_conn_handoff(), and drops
the refcount, which allows the maintenance thread to free its resources. At
this point another thread receives a PDU. Boom.
PR: 222898, 219866
Reported by: Eugene M. Zheganin <emz at norma.perm.ru>
Tested by: Eugene M. Zheganin <emz at norma.perm.ru>
Reviewed by: mav@ (earlier version)
MFC after: 2 weeks
Sponsored by: playkey.net
unconditionally incrementing i in the loop;
Reported by: cem
MFC with: r330880
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14685
Improve clarity of a comment and style(9) some areas.
No functional change.
Reported by: markj (on review of a mostly-copied driver)
Sponsored by: Dell EMC Isilon
document details of salen in getnameinfo(3) manual page.
getnameinfo(3) returned EAI_FAIL when salen was not equal to
the length corresponding to the value specified by sa->sa_family.
However, POSIX or RFC 3493 does not require it and RFC 4038
Sec.6.2.3 shows an example passing sizeof(struct sockaddr_storage)
to salen.
This change makes the requirement less strict by accepting
salen up to sizeof(struct sockaddr_storage). It also includes
two more changes: one is to fix return values because both SUSv4
and RFC 3493 require EAI_FAMILY when the address length is invalid,
another is to fix sa_len dependency in PF_LOCAL.
Pointed out by: Christophe Beauval
Reviewed by: ae
Differential Revision: https://reviews.freebsd.org/D14585
The code assumed that disks (devices) used for testing are always named
like /dev/foo, but there is no reason for that restriction and we can
easily support paths like /dev/stripe/bar.
The change is to account for a different order in which the recursive
destroy may be attempted. If we first try a dataset that can be destroyed
then it will be destroyed, but if we first try a dataset that cannot be
destroyed then we will not attempt to destroy the other dataset.
The problem is that g_access() must be called with the GEOM topology
lock held. And that gives a false impression that the lock is indeed
held across the call. But this isn't always true because many classes,
ZVOL being one of the many, need to drop the lock. It's either to
perform an I/O on the first open or to acquire a different lock (like in
g_mirror_access).
That, of course, can break many assumptions. For example,
g_slice_access() adds an extra exclusive count on the first open. As
described above, an underlying geom may drop the topology lock and that
would open a race with another thread that would also request another
extra exclusive count. In general, two consumers may be granted
incompatible accesses.
To avoid this problem the code is changed to mark a geom with special
flag before calling its access method and clear the flag afterwards. If
another thread sees that flag, then it means that the topology lock has
been dropped (either by the geom in question or downstream from it), so
it is not safe to make another access call. So, the second thread would
use g_topology_sleep() to wait until the flag is cleared and only then
would it proceed with the access.
Also see http://docs.freebsd.org/cgi/mid.cgi?809d9254-ee56-59d8-69a4-08838e985cea
PR: 225960
Reported by: asomers
Reviewed by: markj, mav
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D14533
illumos/illumos-gate@5f5913bb835f5913bb83https://www.illumos.org/issues/9164
This issue has been reported by Alan Somers as
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=225877
dmu_objset_refresh_ownership() first disowns a dataset (and releases
it) and then owns it again. There is an assert that the new dataset
object is the same as the old dataset object. When running ZFS Test
Suite on FreeBSD we see this panic from zpool_upgrade_007_pos test:
panic: solaris assert: newds == os->os_dsl_dataset (0xfffff80045f4c000
== 0xfffff80021ab4800)
I see that the old dataset has dsl_dataset_evict_async() pending in
ds_dbu.dbu_tqent and its ds_dbuf is NULL.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Don Brady <don.brady@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Andriy Gapon <avg@FreeBSD.org>
PR: 225877
Reported by: asomers
MFC after: 1 week
