Consensus seems to be that eliding blank lines for functions with no local
variables is acceptable. Codify that explicitly in the style document.
Reported by: jhb
Reviewed by: delphij, imp, vangyzen (earlier version); rgrimes
With feedback from: kib
Differential Revision: https://reviews.freebsd.org/D20448
Without this patch, mountd would delete/load all exports from the exports
file(s) when it receives a SIGHUP. This works fine for small exports file(s),
but can take several seconds to do when there are large numbers (10000+) of
exported file systems. Most of this time is spent doing the system calls
that delete/export each of these file systems. When the "-S" option
has been specified (the default these days), the nfsd threads are suspended
for several seconds while the reload is done.
This patch changes mountd so that it only does system calls for file systems
where the exports have been changed/added/deleted as compared to the exports
done for the previous load/reload of the exports file(s).
Basically, when SIGHUP is posted to mountd, it saves the exportlist structures
from the previous load and creates a new set of structures from the current
exports file(s). Then it compares the current with the previous and only does
system calls for cases that have been changed/added/deleted.
The nfsd threads do not need to be suspended until the comparison step is
being done. This results in a suspension period of milliseconds for a server
with 10000+ exported file systems.
There is some code using a LOGDEBUG() macro that allow runtime debugging
output via syslog(LOG_DEBUG,...) that can be enabled by creating a file
called /var/log/mountd.debug. This code is expected to be replaced with
code that uses dtrace by cy@ in the near future, once issues w.r.t. dtrace
in stable/12 have been resolved.
The patch should not change the usage of the exports file(s), but improves
the performance of reloading large exports file(s) where there are only a
small number of changes done to the file(s).
Tested by: pen@lysator.liu.se
PR: 237860
Reviewed by: kib
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D20487
illumos/illumos-gate@6fe4f3002c
Reviewed by: Sara Hartse <sara.hartse@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
This is irrelevant to FreeBSD, just to reduce divergence.
illumos/illumos-gate@17fb938fd6
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@2258ad0b75
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: George Wilson <george.wilson@delphix.com>
* Fix boot env back compat
zfsboot must try zfsloader before loader in order to remain compatible
with boot environments created prior to zfs functionality being rolled
into loader proper.
* Improve comments in zfsboot
Explain the significance of the load path order, and put the comment
about looping through the paths in the appropriate scope.
Obtained From: TrueNAS commit 4c60c62fcf0b6b6eac98ee8d46e7bbea64bc86f5
Submitted by: Ryan Moeller <ryan@freqlabs.com>
illumos/illumos-gate@84927f52bd
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Allan Jude <allanjude@freebsd.org>
illumos/illumos-gate@047c81d31d
Reviewed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Saso Kiselkov <saso.kiselkov@nexenta.com>
This is irrelevant to FreeBSD, just a diff reduction.
illumos/illumos-gate@7928f4baf4
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@7341a7de4f
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Brad Lewis <brad.lewis@delphix.com>
illumos/illumos-gate@f62db44dbc
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Andrew Stormont <astormont@racktopsystems.com>
ccr depends on symbols exported by the cxgbe driver as well as having
a runtime dependency. While the runtime depenency was noted in the
manpage already, the compile-time dependency wasn't as clear.
PR: 238265
MFC after: 3 days
Sponsored by: Chelsio Communications
If service code faulted, we might end up unwinding with interrupts
disabled. Top-level kernel code should have interrupts enabled, which
is enforced by checks.
Save %rflags before entering EFI, and restore to the known good value
on return. This handles situation with disabled interrupts on fault
and perhaps other potential bugs, e.g. invalid value for PSL_D.
Reported and tested by: Jan Martin Mikkelsen <janm@transactionware.com>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
We already handled the case when symstrindex < 0 at line 680.
Reported by: danfe using PVS-studio
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
sw_flags is set to the function argument several lines later.
Reported by: danfe using PVS-studio
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
the followup stopgap change, because I don't think it's a correct. I still
need to figure out where to stick it in. In cannot be in Makefile.inc1
and it cannot be in etc/Makefile from the looks of it to avoid
chicken-and-egg problem.
This change enables natural scrolling with two finger scroll enabled
and when user is using a trackpad (mouse and trackpoint are not affected).
Depending on trackpad model it can be activated with setting of
hw.psm.synaptics.natural_scroll or hw.psm.elantech.natural_scroll sysctl
values to 1.
Evdev protocol is not affected by this change too. Tune userland client
e.g. libinput to enable natural scrolling in that case.
Submitted by: nyan_myuji.xyz
Reviewed by: wulf
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20447
In this case, a change was made in one-true-awk from *FS to
getsval(fsloc) in a line just after one of the lines that had the 0 ->
NULL change. It works both ways as far as I can tell. It looks like a
bug fix, but I've not tried to track down which ancient version of
one-true-awk it was in (github starts too late for tracking this
down). Before and after the changes the regression suite is passes
100% relative to the un-modified one-true-awk.
The conversion of 0 -> NULL required a rebase at some point, as noted
in r301289 when pfg commited it. In that rebase, three lines remained
that had been removed in a prior version of awk, and one of them had a
0 -> NULL change causing a conflict. The conflict should have been
resolved by removing the three lines, but wasn't. This introduces a
regression into f.split3 test which prior to this commit we were
failing, but a pure onetrueawk wasn't. Remove the offending 3 lines.
as part of a false start toward fine-grained reservation locking. In the
end, they were not needed, so eliminate them.
Order the parameters to vm_reserv_alloc_{contig,page}() consistently with
the vm_page functions that call them.
Update the comments about the locking requirements for
vm_reserv_alloc_{contig,page}(). They no longer require a free page
queues lock.
Wrap several lines that became too long after the "req" and "domain"
parameters were added to vm_reserv_alloc_{contig,page}().
Reviewed by: kib, markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20492
install -> ${INSTALL}
mtree -> ${MTREE_CMD}
services_mkdb -> ${SERVICES_MKDB_CMD}
cap_mkdb -> ${CAP_MKDB_CMD}
pwd_mkdb -> ${PWD_MKDB_CMD}
kldxref -> ${KLDXREF_CMD}
If you do custom FreeBSD builds you may want to override those
in some cases.
Sponsored by: Sippy Software, Inc.
Revert r301689 - one-true-awk: Avoid a NULL dereference.
I got this wrong and the coverity report doesn't match the NetBSD change,
which was thought for a different version.
The change wouldn't hurt but let's wait until upstream figures this out.
Other frameworks, such as googletest, should be added there as well,
once they become viable. For now let's keep it simple.
Discussed with: ngie, emaste
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20124
Note: this backs out a number of changes we've made to awk because
they aren't upstream, but are on the vendor branch. Those will be
reapplied. svn makes it needlessly difficult to know which ones, but
at least r315426, r301289, and maybe r301691, though there may be
others too. None of these are critical, so bisecting through this
point is safe for all but awk regression tests :).
