Commit Graph

154932 Commits

Author SHA1 Message Date
Kip Macy
2965a45315 On Alan's advice, rather than do a wholesale conversion on a single
architecture from page queue lock to a hashed array of page locks
(based on a patch by Jeff Roberson), I've implemented page lock
support in the MI code and have only moved vm_page's hold_count
out from under page queue mutex to page lock. This changes
pmap_extract_and_hold on all pmaps.

Supported by: Bitgravity Inc.

Discussed with: alc, jeffr, and kib
2010-04-30 00:46:43 +00:00
Pyun YongHyeon
106b2e2ff2 Both RX_GMF_LP_THR and RX_GMF_UP_THR must be 16 bits register. If
it is 8bits register then RX FIFO size can't exceed 2KB which is
not true for almost all Yukon II controller.
2010-04-30 00:34:00 +00:00
Andrew Thompson
8cfa1186ed usb_controller.c requires opt_ddb.h 2010-04-29 22:51:18 +00:00
David Christensen
ae575eab2c - Pass flow control settings back to bce(4).
MFC after:	Two weeks
2010-04-29 22:00:57 +00:00
Pawel Jakub Dawidek
d92714eea8 Default connection timeout is way too long. To make it shorter we have to
make socket non-blocking, connect() and if we get EINPROGRESS, we have to
wait using select(). Very complex, but I know no other way to define
connection timeout for a given socket.

Reported by:	hiroshi@soupacific.com
MFC after:	3 days
2010-04-29 21:55:20 +00:00
Xin LI
8bbe8f7393 Add FreeBSD 8.1 to known list as it's being referenced by a couple of
manpages already.

MFC after:	3 days
2010-04-29 18:37:56 +00:00
Xin LI
976d54c3f7 bwn(4) will first appear in FreeBSD 8.1-RELEASE.
MFC after:	1 week
2010-04-29 18:32:14 +00:00
Pyun YongHyeon
53ac9f49f0 Now sge(4) supports hardware VLAN tag insertion/stripping. 2010-04-29 18:21:27 +00:00
Pyun YongHyeon
c186cf13eb Enable VLAN hardware tag insertion/stripping. Due to lack of SiS190
controller, I'm not sure whether this is also applicable to SiS190
so this feature is only activated on SiS191 controller.
In theory, controller reinitialization is not needed when VLAN tag
configuration is changed, but xclin said controller was not stable
whenever toggling VLAN tag bit. To address that, sge(4)
reinitialize controller for VLAN configuration which seems to work
as expected. VLAN tag information for TX/RX descriptor and
configure bit of RxMacControl register was found by xclin.

Submitted by:	xclin <xclin <> cs dot nctu dot edu dot tw > (initial version)
Tested by:	xclin <xclin <> cs dot nctu dot edu dot tw >
2010-04-29 18:14:14 +00:00
Pyun YongHyeon
d1c5ee8030 Enable FCS stripping and padding 10 bytes bit of RX MAC control
register. Due to lack of SiS190 controller, I'm not sure whether
this is also applicable to SiS190 so this feature is only activated
on SiS191 controller.
The controller can pad 10 bytes before DMAing a received frame to
RX buffer and received bytes include the padded bytes. This padding
is very useful on strict-alignment architectures because driver
does not have to copy received frame to align IP header on 4 bytes
boundary. It also gives better RX performance on non-strict
alignment architectures. Special thanks to xclin to give me
valuable register information. Without his enthusiastic trial and
errors this wouldn't be even possible.

While I'm here tighten validity check of received frame. Controller
clears RDS_CRCOK bit when it received bad CRC frames. xclin found
that using loop back testing.

Tested by:	xclin <xclin <> cs dot nctu dot edu dot tw >
2010-04-29 18:00:42 +00:00
Pyun YongHyeon
7f20f021e1 Explicitly marks SiS190 to differentiate it from SiS191. 2010-04-29 17:34:01 +00:00
Pyun YongHyeon
60a1a1542e Remove wrong link state chage. 2010-04-29 17:30:21 +00:00
Pyun YongHyeon
9c2851d29a Preserve unknown bits of RX MAC control register when driver
programs RX filter configuration. It seems RX MAC control register
is one of key registers to get various offloading features as well
as performance. Blindly clearing unrelated bits can result in
unexpected results.

Tested by:	xclin <xclin <> cs dot nctu dot edu dot tw >
2010-04-29 17:28:07 +00:00
Alan Cox
82bfb965d1 Simplify the inner loop of vm_pageout_object_deactivate_pages(). Rather
than checking each page for PG_UNMANAGED, check the vm object's type.
Only OBJT_PHYS can have unmanaged pages.  Eliminate a pointless counter.
The vm object is locked, that lock is never released by the inner loop,
and the set of pages contained by the vm object is not changed by the
inner loop.  Therefore, the counter serves no purpose.
2010-04-29 16:18:45 +00:00
Alan Cox
1332aaf9ed MFamd64/i386 r207205
Clearing a page table entry's accessed bit and setting the page's
  PG_REFERENCED flag in pmap_protect() can't really be justified, so
  don't do it.  Moreover, on ia64, don't set the page's dirty field
  unless pmap_protect() is removing write access.
2010-04-29 15:47:31 +00:00
Pawel Jakub Dawidek
c6ddcbe009 - Check if the worker process was killed by signal and restart it.
- Improve logging.

Pointed out by:	Garrett Cooper <yanefbsd@gmail.com>
MFC after:	3 days
2010-04-29 15:42:24 +00:00
Pawel Jakub Dawidek
5571414ca8 Fix a problem where hastd will stuck in recv(2) after sending request to
secondary, which died between send(2) and recv(2). Do it by adding timeout
to recv(2) for primary incoming and outgoing sockets and secondary outgoing
socket.

Reported by:	Mikolaj Golub <to.my.trociny@gmail.com>
Tested by:	Mikolaj Golub <to.my.trociny@gmail.com>
MFC after:	3 days
2010-04-29 15:36:32 +00:00
Rui Paulo
4f43f86e0b Decrement rxa_pad due to the addition of rxa_private. 2010-04-29 15:19:11 +00:00
Bjoern A. Zeeb
82cea7e6f3 MFP4: @176978-176982, 176984, 176990-176994, 177441
"Whitspace" churn after the VIMAGE/VNET whirls.

Remove the need for some "init" functions within the network
stack, like pim6_init(), icmp_init() or significantly shorten
others like ip6_init() and nd6_init(), using static initialization
again where possible and formerly missed.

Move (most) variables back to the place they used to be before the
container structs and VIMAGE_GLOABLS (before r185088) and try to
reduce the diff to stable/7 and earlier as good as possible,
to help out-of-tree consumers to update from 6.x or 7.x to 8 or 9.

This also removes some header file pollution for putatively
static global variables.

Revert VIMAGE specific changes in ipfilter::ip_auth.c, that are
no longer needed.

Reviewed by:	jhb
Discussed with:	rwatson
Sponsored by:	The FreeBSD Foundation
Sponsored by:	CK Software GmbH
MFC after:	6 days
2010-04-29 11:52:42 +00:00
Andriy Gapon
deb3b115e2 ffs_vfsops: restore alphabetic order of options in ffs_opts
The order was not correct only for nfsv4acls.
("no" prefix is ignored)

MFC after:	1 week
2010-04-29 10:04:00 +00:00
Konstantin Belousov
6fb8c0c117 When doing kstack swapin, read as much pages in one run as possible.
Suggested and reviewed by:	alc (previous version)
Tested by:	pho
MFC after:	2 weeks
2010-04-29 09:59:16 +00:00
Konstantin Belousov
e86a87e97e In swap pager, do not free the non-requested pages from the run if they are
wired. Kstack pages are wired, this change prepares swap pager for handling
of long runs of kstack pages.

Noted and reviewed by:	alc
Tested by:	pho
MFC after:	2 weeks
2010-04-29 09:57:25 +00:00
Konstantin Belousov
e68d26fd5d Remove caddr_t casts.
Requested by:	bde
MFC after:	10 days
2010-04-29 09:55:51 +00:00
Andriy Gapon
4f27c5edfe kern_ntptime: drop a comment that became stale after r207359
MFC after:	1 week
X-MFC after:	r207359
2010-04-29 09:18:36 +00:00
Andriy Gapon
5c7e270fcd periodically save system time to hardware time-of-day clock
This is done in kern_ntptime, perhaps not the best place.
This is done using resettodr().
Some features:
- make save period configurable via tunable and sysctl
- period of zero disables saving, setting a non-zero period re-enables
  it or reschedules it
- do saving only if system clock is ntp-synchronized
- save on shutdown

Discussed with:	des, Peter Jeremy <peterjeremy@acm.org>
X-Maybe:		save time near seconds boundary for better precision
MFC after:		2 weeks
2010-04-29 09:02:46 +00:00
Andriy Gapon
9a9ae42a43 kern_ntptime: abstract time error check into a function
... to avoid code duplication

MFC after:	1 week
2010-04-29 09:02:21 +00:00
Yoshihiro Takahashi
9aac760c7d MFi386: revision 206553
- Change printf() calls to uprintf() for sigreturn().
  - Normalize the messages to include both pid and thread name.
2010-04-29 06:22:07 +00:00
Maxim Sobolev
ff605594dd On certain chipsets AT keyboard controller isn't present and is
emulated by BIOS using SMI interrupt. On those chipsets reading
from the status port may be thousand times slower than usually.
Sometimes this emilation is not working properly resulting in
commands timing out and since we assume that inb() operation
takes very little time to complete we need to adjust number of
retries to keep waiting time within a designed limits (100ms).
Measure time it takes to make read_status() call and adjust
number of retries accordingly.

To keep it simple, use TSC to measure inb() performance and
keep it to amd64-only, since TSC may not available on older
CPUs.

Also enable detection of the AT controller absence on amd64.

Reviewed by:	jhb
MFC after:	1 month
2010-04-29 06:16:00 +00:00
Rick Macklem
8583f92fdf For the experimental NFS client, it should always flush dirty
buffers before closing the NFSv4 opens, as the comment states.
This patch deletes the call to nfscl_mustflush() which would
return 0 for the case where a delegation still exists, which
was incorrect and could cause crashes during recovery from
an expired lease.

MFC after:	1 week
2010-04-28 23:16:21 +00:00
Rick Macklem
cb8a84e08e Delete a diagnostic statement that is no longer useful from
the experimental NFS client.

MFC after:	1 week
2010-04-28 23:05:42 +00:00
Pawel Jakub Dawidek
83a5671405 Restart worker thread only if the problem was temporary.
In case of persistent problem we don't want to loop forever.

MFC after:	3 days
2010-04-28 22:41:06 +00:00
Pawel Jakub Dawidek
5abfc9c145 Mark temporary issues as such.
MFC after:	3 days
2010-04-28 22:39:47 +00:00
Doug Barton
a16334d031 In the case where named_chroot_autoupdate is NOT set, but
named_chrootdir IS set, named-checkconf fails because it
cannot find the conf file. Fix this by making checkconf a
variable that includes "-t $named_chrootdir" as needed.
Notice of the bug and suggested direction for the fix from [1].

Using required_files for named.conf is overkill ever since
I added the named-checkconf call, so rather than update the
logic to handle the case described above, remove it. This
also handles the case where named_chroot_autoupdate IS set
but the symlink doesn't exist yet.

PR:		conf/145904
Submitted by:	J R Matthews
2010-04-28 22:29:17 +00:00
Pawel Jakub Dawidek
06c117d1d1 Use WEXITSTATUS() to obtain real exit code.
MFC after:	3 days
2010-04-28 22:26:30 +00:00
Jung-uk Kim
3f5e024c14 Merge ACPICA 20100428. 2010-04-28 22:25:27 +00:00
Pawel Jakub Dawidek
1228041bd5 Don't assume that "resource" property is in metadata.
Reported by:	Mikolaj Golub <to.my.trociny@gmail.com>
MFC after:	3 days
2010-04-28 22:23:29 +00:00
Jung-uk Kim
5b663f0c69 Import ACPICA 20100428. 2010-04-28 21:50:57 +00:00
Jack F Vogel
beef45ff88 Address the LOD that some are seeing, put the RX lock
back in rxeof (I could see little point in taking it out),
and now release it before the stack entry.

Also, make it so the 82574 does not configure for multiqueue
when its not used in the stack.
2010-04-28 19:22:52 +00:00
John Baldwin
aa1385cd7b Initialize the callout structure earlier in attach before calling any
routines that can fail since ciss_free() always tries to stop and drain
the callout.
2010-04-28 18:49:45 +00:00
Pawel Jakub Dawidek
b19b0de471 Backport fix for 'zfs_znode_dmu_init: existing znode for dbuf' panic from OpenSolaris.
PR:		kern/144402
Reported by:	Alex Bakhtin <alex.bakhtin@gmail.com>
Tested by:	Alex Bakhtin <alex.bakhtin@gmail.com>
Obtained from:	OpenSolaris, Bug ID 6895088
MFC after:	3 days
2010-04-28 18:29:48 +00:00
Jack F Vogel
1655af0a72 Change default WOL back to MAGIC only, having
multicast enabled causes problems in man environments.
2010-04-28 17:37:30 +00:00
Jung-uk Kim
8c975e70af Remove dead code. Calculated greatest common divisor was not used at all.
On top of that, LLVM+Clang mis-compiles this code because of its register
allocator bug.

Analyzed by:	Andrew Reilly (areilly at bigpond dot net dot au)
Reviewed by:	ariff, rdivacky
MFC after:	3 days
2010-04-28 17:26:05 +00:00
Attilio Rao
d8b878873e - Extract the IODEV_PIO interface from ia64 and make it MI.
In the end, it does help fixing /dev/io usage from multithreaded
  processes.
- On i386 and amd64 the old behaviour is kept but multithreaded
  processes must use the new interface in order to work well.
- Support for the other architectures is greatly improved, where
  necessary, by the necessity to define very small things now.

Manpage update will happen shortly.

Sponsored by:	Sandvine Incorporated
PR:		threads/116181
Reviewed by:	emaste, marcel
MFC after:	3 weeks
2010-04-28 15:38:01 +00:00
Rui Paulo
ee6b5ace1f Add a private field to struct ieee80211_rx_ampdu do hold driver specific
data.

Sponsored by:	iXsystems, inc
2010-04-28 14:59:05 +00:00
Rui Paulo
dfe4a64b12 Add ic_rxstream and ic_txstream. These variables hold the number of RX
streams and the number of TX streams respectively.

Obtained from:	//depot/user/rpaulo/80211n/...
Sponsored by:	iXsystems, inc.
2010-04-28 13:42:13 +00:00
Rui Paulo
54862540ba Couple of fixes from DragonFly (typos).
Obtained from:	DragonFlyBSD
2010-04-28 13:29:48 +00:00
Rui Paulo
380fe2df60 When in the RUN -> AUTH -> RUN FSM transition happens, we'll call the
ratectl_node_init() functions and since ni_rtctls was already
malloc'ed() we will panic. Fix this by using the already malloc'ed
pointer.

Found by:	bschmidt
Reviewed by:	bschmidt
2010-04-28 13:25:53 +00:00
Rui Paulo
48e1bda05f Fix typo. No functional change.
Obtained from:	DragonFlyBSD
2010-04-28 10:58:50 +00:00
Rui Paulo
2fb1e09dee Bump man page date. 2010-04-28 10:58:03 +00:00
Rui Paulo
f30f9d4006 Fix typos.
Obtained from:	DragonFlyBSD
2010-04-28 10:57:27 +00:00