Long ago this was needed, but now low-level i2c controller drivers cleverly
defer attachment of the bus until interrupts are enabled (if they require
interrupts to function), so that every i2c slave device doesn't have to.
We used the aw_clk_nm clock for clock with only one divider factor
and used a fake multiplier factor. This cannot work properly as we
end up writing the "fake" factor to the register (and so always set
the LSB to 1).
Create a new clock for those.
The reason for not using the clk_div clock is because those clocks are
a bit special. Since they are (almost) all related to video we also need
to set the parent clock (the main PLL) to a frequency that they can support.
As the main PLL have some minimal frequency that they can support we need to
be able to set the main PLL to a multiple of the desired frequency.
Let say you want to have a 71Mhz pixel clock (typical for a 1280x800 display)
and the main PLL cannot go under 192Mhz, you need to set it to 3 times the
desired frequency and set the divider to 3 on the hdmi clock.
So this also introduce the CLK_SET_ROUND_MULTIPLE flag that allow for this kind
of scenario.
- Put all clock and control unit driver in BUS_PASS_RESOURCE except
for the DE2 CCU as it needs the main CCU to be available.
- Use BUS_PASS_CPU for a20_cpu_cfg as it makes more sense.
- For aw_syscon use SCHEDULER pass as we need it early for drivers
that attach in BUS_PASS_SUPPORTDEV
- For the rest we can use BUS_PASS_SUPPORTDEV
ensure that the subsequent mbuf contains the remainder of the bytes
the caller sought. If this is not the case, fall through to the code
which gathers the bytes in a new mbuf.
This fixes a bug where m_pulldown() could fail to gather all the desired
bytes into consecutive memory.
PR: 238787
Reported by: A reddit user
Discussed with: emaste
Obtained from: NetBSD
MFC after: 3 days
Our in-tree gcc doesn't have a no-tree-vectorize optimization knob, so we get a
warning that it's unused. This causes the build to fail on all our gcc platforms.
Add a quick version check as a stop-gap measure to get CI building again.
An earlier version of the patch had code that set "error" between
line#s 2797-2799. When that code was moved, the second check for "error != 0"
could never be true and the check became harmless cruft.
This patch removes the cruft, mainly to make Coverity happy.
Reported by: asomers, cem
Since the VOP_IOCTL(FIOSEEKDATA/FIOSEEKHOLE) calls are done with the
vnode unlocked, it is possible for another thread to do:
- truncate(), lseek(), write()
between the two calls and create a hole where FIOSEEKDATA returned the
start of data.
For this case, VOP_IOCTL(FIOSEEKHOLE) will return the same offset for
the hole location. This could result in an infinite loop in the copy
code, since copylen is set to 0 and the copy doesn't advance.
Usually, this race is avoided because of the use of rangelocks, but the
NFS server does not do range locking and could do a sequence like the
above to create the hole.
This patch checks for this case and makes the hole search fail, to avoid
the infinite loop.
At this time, it is an open question as to whether or not the NFS server
should do range locking to avoid this race.
We should support removing vdev from boot pool. Update loader zfs reader
to support com.delphix:removing.
Reviewed by: allanjude
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D18901
Create a rough and ready NOTES file from GENERIC, remove the duplication from
sys/conf/NOTES and add relevant no* directives to make this compile.
Reviewed by: jhb, manu (earlier versions that differed only in comments)
Differential Revision: https://reviews.freebsd.org/D21184
The COMPAT_43 option isn't quite like the other compat options, and arm64 makes
attempts to support it in 64-bit mode. In 32-bit compat mode, however, two
syscall implementations that COMPAT_FREEBSD32 assumes will be there are
missing. Provide implementations for these: ofreebsd32_sigreturn (which we'll
never encounter, so implement it as nosys as is done in kern_sig.c) and
ofreebsd32_getpagesize, where we'll always return 4096 since that's the only
PAGE_SIZE we support, similar to how the ia32 implementation does things.
Reviewed by: manu@
Differential Revision: https://reviews.freebsd.org/D21192
During early stages of kern_exec(), including strings copyout,
p_textvp for init is NULL. This prevented stack grow from working for
init execution.
Without stack gap enabled, initial stack segment size is enough for
strings passed by kernel to init. With the gap enabled, the used
address might fall out of the initial segment, which kills init.
Exclude initproc from the check for contexts which should not cause
stack grow in the target map.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Attempts to use cryptodev (e.g. tests at /usr/src/tests/sys/opencrypto
with armv8crypto added to the module lists) were causing a panic.
Submitted by: Greg V <greg_unrelenting.technology>
Differential Revision: https://reviews.freebsd.org/D21012
IPPROTO 33 is DCCP in the IANA Registry:
https://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml
IPPROTO_SEP was added about 20 years ago in r33804. The entries were added
straight from RFC1700, without regard to whether they were used.
The reference in RFC1700 for SEP is '[JC120] <mystery contact>', this is an
indication that the protocol number was probably in use in a private network.
As RFC1700 is no longer the authoritative list of internet numbers and that
IANA assinged 33 to DCCP in RFC4340, change the header to the actual
authoritative source.
Reviewed by: Richard Scheffenegger, bz
Approved by: bz (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21178
Move ip6asfrag and the accompanying IP6_REASS_MBUF macro from
ip6_var.h into frag6.c as they are not used outside frag6.c.
Sadly struct ip6q is all over the mac framework so we have to
leave it public.
This reduces the public KPI space.
MFC after: 3 months
X-MFC: possibly MFC the #define only to stable branches
Sponsored by: Netflix
Consitently put () around return values.
Do not assign variables at the time of variable declaration.
Sort variables. Rename ia to ia6, remove/reuse some variables used only
once or twice for temporary calculations.
No functional changes intended.
MFC after: 3 months
Sponsored by: Netflix
Cleanup some comments (start with upper case, ends in punctuation,
use width and do not consume vertical space). Update comments to
RFC8200. Some whitespace changes.
No functional changes.
MFC after: 3 months
Sponsored by: Netflix
- Use new zlib headers;
- Removed z_alloc and z_free to use the common sys/dev/zlib version.
- Replace z_compressBound with compressBound from zlib.
While there, limit LZMA CFLAGS to apply only for g_uzip_lzma.c.
PR: 229763
Submitted by: Yoshihiro Ota <ota j email ne jp> (with changes,
bugs are mine)
Differential Revision: https://reviews.freebsd.org/D20271
pmap's lock ensures that other operations on the pmap don't observe the
old mapping being broken before the new mapping is established. However,
pmap_kextract() doesn't acquire the kernel pmap's lock, so it may observe
the broken mapping. And, if it does, it returns an incorrect result.
This revision implements a lock-free solution to this problem in
pmap_update_entry() and pmap_kextract() because pmap_kextract() can't
acquire the kernel pmap's lock.
Reported by: andrew, greg_unrelenting.technology
Reviewed by: andrew, markj
Tested by: greg_unrelenting.technology
X-MFC with: r350579
Differential Revision: https://reviews.freebsd.org/D21169
It is part of -Wformat, which is enabled by -Wall. Empty format strings are
well defined and it is perfectly reasonable to expect them in a formatting
interface.
KDB is standard and the kdb_active variable is always available. So,
de-conditionalize inclusion of sys/kdb.h in kern_sysctl.c.
Reported by: Michael Butler <imb AT protected-networks.net>
X-MFC-With: r350713
Sponsored by: Dell EMC Isilon
Implement `sysctl` in `ddb` by overriding `SYSCTL_OUT`. When handling the
req, we install custom ddb in/out handlers. The out handler prints straight
to the debugger, while the in handler ignores all input. This is intended
to allow us to print just about any sysctl.
There is a known issue when used from ddb(4) entered via 'sysctl
debug.kdb.enter=1'. The DDB mode does not quite prevent all lock
interactions, and it is possible for the recursive Giant lock to be unlocked
when the ddb(4) 'sysctl' command is used. This may result in a panic on
return from ddb(4) via 'c' (continue). Obviously, this is not a problem
when debugging already-paniced systems.
Submitted by: Travis Lane (formerly: <travis.lane AT isilon.com>)
Reviewed by: vangyzen (earlier version), Don Morris <dgmorris AT earthlink.net>
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D20219
On FreeBSD 13.0, the fuse driver will always be known as fusefs. The
backwards compatibility symlink will still be used for stable/12 and
stable/11, though.
Reported by: jhibbits
Reviewed by: rgrimes, imp, cem
MFC after: Never
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21181
Similar to what was done for device_printfs in r347229.
Convert g_print_bio() to a thin shim around g_format_bio(), which acts on an
sbuf; documented in g_bio.9.
Reviewed by: markj
Discussed with: rlibby
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21165
The API is used to gracefully terminate text line(s) with a single \n. If
the formatted buffer was empty or already ended in \n, it is unmodified.
Otherwise, a newline character is appended to it. The API, like other
sbuf-modifying routines, is only valid while the sbuf is not FINISHED.
Reviewed by: rlibby
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21030
Code flow was somewhat difficult to read due to the combination of
multiple return sites and the 4x possible dynamic constructions of an
sbuf. (Future consideration: do we need all 4?) Refactored slightly to
improve legibility.
No functional change.
Sponsored by: Dell EMC Isilon
The goal is to avoid some kinds of low-memory deadlock when formatting
heap-allocated buffers.
Reviewed by: vangyzen
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21015
with Communication Device Class Ethernet Emulation Model (CDC EEM).
The driver supports both the device, and host side operation; there
is a new USB template (#11) for the former.
This enables communication with virtual USB NIC provided by iLO 5,
as found in new HPE Proliant servers.
Reviewed by: hselasky
MFC after: 2 weeks
Relnotes: yes
Sponsored by: Hewlett Packard Enterprise
It allows to read and write block descriptors alike to mode page parameters.
It allows to change block size or short-stroke HDDs or overprovision SSDs.
Depenting on -P parameter the change can be either persistent or till reset.
In case of block size change device may need reformat after the setting.
In case of SSD overprovisioning format or sanitize may be needed to really
free the flash.
During implementation appeared that csio_encode_visit() can not handle
integers of more then 4 bytes, that makes 8-byte LBA handling awkward.
I had to split it into two 4-byte halves now.
MFC after: 1 week
Relnotes: yes
Sponsored by: iXsystems, Inc.
Some hardware needs more than 32, bump this value.
We cannot use the _alloc for of getencprop as this function is called
too early in the boot before pmap is initialized and we only have
2k of stack when cninit is called.
Discussed with: ian
The region for uart0 is declared to be 0x2000 in size but the parent
node only declare 0x1000.
As the parent only declare a size of 0x1000 in the ranges for it's children
this cause the device to not be mappable.
https://patchwork.kernel.org/patch/11056769/
