stuff. This utility allows inspection of the ATM characteristics,
the PHY layer, including statistics of both, the retrival of the
list of currently open channels and also allows access to utopia(4).
new ATMIOCOPENVCC/CLOSEVCC. This allows us to not only use UBR channels
for IP over ATM, but also CBR, VBR and ABR. Change the format of the
link layer address to specify the channel characteristics. The old
format is still supported and opens UBR channels.
integer value and then to construct the integer from it. This buffer
was sizeof(int) bytes long, which was fine until the (undocumented) 'g'
modifier for 8-byte integers was introduced. Change this to sizeof(uint64_t).
found only many tv-cards.
We currently use more ore less evil hacks (slow_msp_audio sysctl) to
configure the various variants of these chips in order to have
stereo autodetection work. Nevertheless, this doesn't always work
even though it _should_, according to the specs.
This is, for example, the case for some popular Hauppauge models sold
sold in Germany.
However, the Linux driver always worked for me and others. Looking at
the sourcecode you will find that the linux-driver uses a very much
enhanced approach to program the various msp34xx chipset variants,
which is also found in the specs for these chips.
This is a port of the Linux MSP34xx code, written by Gerd Knorr
<kraxel@bytesex.org>, who agreed to re-release his code under a
BSD license for this port.
A new config option "BKTR_NEW_MSP34XX_DRIVER" is added, which is required
to enable the new driver. Otherwise the old code is used.
The msp34xx.c file is diff-reduced to the linux-driver to make later
modifications easier, thus it doesn't follow style(9) in most cases.
Approved by: roger (committing this, no time to test/review),
keichii (code review)
o Differentiate between CPU family and CPU model. There are multiple
Itanium 2 models and it's nice to differentiate between them.
o Seperately export the CPU family and CPU model with sysctl.
o Merced is the only model in the Itanium family.
o Add Madison to the Itanium 2 family. We already knew about McKinley.
o Print the CPU family between parenthesis, like we do with the i386
CPU class.
My prototype now identifies itself as:
CPU: Merced (800.03-Mhz Itanium)
pluto1 and pluto2 will eventually identify themselves as:
CPU: McKinley (900.00-Mhz Itanium 2)
These are 10/100 only NICs found on the IBM Thinkpad R40E and
G40. These seem to be based on the BCM5705 MAC but with a PHY
that doesn't support 1000Mbps modes.
Submitted by: Igor Sviridov <sia@nest.org>
There are now many configurations which have a NIC on board, and
pccard slots. If a dhclient is running on the internal nic, the
Improve the handling dhcp handling of pccard_ether.
Improve the dhcp handling of pccard_ether.
There are now many configurations which have a NIC on board and
Improve the dhcp handling of pccard_ether.
There are now many configurations which have a NIC on board and
cardbus slots too. If a dhclient was already running on the internal
NIC, the user was forced to kill a running dhclient manually.
If now a pccard is included at startup time, /etc/rc.d/dhclient
start does include it into the startup list for dhcp devices.
That means you can now do dhcp on the internal and the pccard devices
at the same time. If the card is plugged in later, a running dhclient
(working for the internal interface only) is killed, and restarted,
but the interface name of the new pccard is added to the internal
name. After removal, /etc/rc.d/dhclient is started again. This
script does nothing if there are no devices in /etc/rc.conf
This is only a workaround for a well known problem. After we have
a dhcp client which handles device adding and removal, it will go
away.
compare the zone element size (+1 for the byte of linkage) against
UMA_SLAB_SIZE - sizeof(struct uma_slab), and not just UMA_SLAB_SIZE.
Add a KASSERT in zone_small_init to make sure that the computed
ipers (items per slab) for the zone is not zero, despite the addition
of the check, just to be sure (this part submitted by: silby)
- UMA_ZONE_VM used to imply BUCKETCACHE. Now it implies
CACHEONLY instead. CACHEONLY is like BUCKETCACHE in the
case of bucket allocations, but in addition to that also ensures that
we don't setup the zone with OFFPAGE slab headers allocated from the
slabzone. This means that we're not allowed to have a UMA_ZONE_VM
zone initialized for large items (zone_large_init) because it would
require the slab headers to be allocated from slabzone, and hence
kmem_map. Some of the zones init'd with UMA_ZONE_VM are so init'd
before kmem_map is suballoc'd from kernel_map, which is why this
change is necessary.
- All those diffs to syscalls.master for each architecture *are*
necessary. This needed clarification; the stub code generation for
mlockall() was disabled, which would prevent applications from
linking to this API (suggested by mux)
- Giant has been quoshed. It is no longer held by the code, as
the required locking has been pushed down within vm_map.c.
- Callers must specify VM_MAP_WIRE_HOLESOK or VM_MAP_WIRE_NOHOLES
to express their intention explicitly.
- Inspected at the vmstat, top and vm pager sysctl stats level.
Paging-in activity is occurring correctly, using a test harness.
- The RES size for a process may appear to be greater than its SIZE.
This is believed to be due to mappings of the same shared library
page being wired twice. Further exploration is needed.
- Believed to back out of allocations and locks correctly
(tested with WITNESS, MUTEX_PROFILING, INVARIANTS and DIAGNOSTIC).
PR: kern/43426, standards/54223
Reviewed by: jake, alc
Approved by: jake (mentor)
MFC after: 2 weeks
From alc:
Move pageable pipe memory to a seperate kernel submap to avoid awkward
vm map interlocking issues. (Bad explanation provided by me.)
From me:
Rework pipespace accounting code to handle this new layout, and adjust
our default values to account for the fact that we now have a solid
limit on allocations.
Also, remove the "maxpipes" limit, as it no longer has a purpose.
(The limit on kva usage solves the problem of having two many pipes.)
application could cause a wired page to be freed. In general,
vm_page_hold() should be preferred for ephemeral kernel mappings of pages
borrowed from a user-level address space. (vm_page_wire() should really be
reserved for indefinite duration pinning by the "owner" of the page.)
Discussed with: silby
Submitted by: tegge
psignal()/tdsignal(). The test was historically in psignal(). It was
changed into a KASSERT, and then later moved to tdsignal() when the
latter was introduced.
Reviewed by: iedowse, jhb
ioctls.
In the particular case of ptrace(), this commit more-or-less reverts
revision 1.53 of sys_process.c, which appears to have been erroneous.
Reviewed by: iedowse, jhb
