patch supplied by Allan Jude <freebsd@allanjude.com>. Add xref to
pam_passwdqc(8), where that testing is now done.
PR: docs/184482
Submitted by: Ryan Gerstenkorn <ryan_gerstenkorn@fastmail.fm>
Reviewed by: jilles, eadler
MFC after: 3 days
Also, extend with some new events.
Additionally, tag syslog messages with 'ZFS' instead of using explicit "ZFS: "
prefix in the messages themselves.
Tested by: Daniel O'Connor <doconnor@gsoft.com.au>
MFC after: 8 days
Sponsored by: HybridCluster
Experimental version released on February 7th, 2014.
This is the first release without the code for the deprecated tools. If
you require such code, please fetch a copy of the 0.19 release and extract
the 'tools' directory for your own consumption.
* Removed the deprecated tools. This includes atf-config, atf-report,
atf-run and atf-version.
Experimental version released on February 7th, 2014.
This is the last release to bundle the code for the deprecated tools.
The next release will drop their code and will stop worrying about
backwards compatibility between the ATF libraries and what the old tools
may or may not support.
If you still require the old tools for some reason, grab a copy of the
'tools' directory now. The code in this directory is standalone and
does not depend on any internal details of atf-c++ any longer.
* Various fixes and improvements to support running as part of the FreeBSD
test suite.
* Project hosting moved from Google Code (as a subproject of Kyua) to
GitHub (as a first-class project). The main reason for the change is
the suppression of binary downloads in Google Code on Jan 15th, 2014.
See https://github.com/jmmv/atf/
* Removed builtin help from atf-sh(1) and atf-check(1) for simplicity
reasons. In other words, their -h option is gone.
* Moved the code of the deprecated tools into a 'tools' directory and
completely decoupled their code from the internals of atf-c++. The
reason for this is to painlessly allow a third-party to maintain a
copy of these tools after we delete them because upcoming changes to
atf-c++ would break the stale tools.
insert flow entry. During the route lookup the critical section is
exited. It may happen, that after route lookup we will be executed
on an other CPU that already has such flowentry. Before this change
we simply freed the flowentry and returned to ip_output() with
failure.
Actually there is nothing wrong with using previously allocated
flow entry, updating it properly. Thus, make flowentry_insert()
return the new either old fle, and make use of it.
Count reuses as "collisions" and real inserts as "inserts".
Reviewed by: adrian
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
race prone. Some just gather statistics, but some are later used in
different calculations.
A real problem was the race provoked underflow of the states_cur counter
on a rule. Once it goes below zero, it wraps to UINT32_MAX. Later this
value is used in pf_state_expires() and any state created by this rule
is immediately expired.
Thus, make fields states_cur, states_tot and src_nodes of struct
pf_rule be counter(9)s.
Thanks to Dennis for providing me shell access to problematic box and
his help with reproducing, debugging and investigating the problem.
Thanks to: Dennis Yusupoff <dyr smartspb.net>
Also reported by: dumbbell, pgj, Rambler
Sponsored by: Nginx, Inc.
The on-board NIC is an 3x3 AR9380 with 5GHz only.
* enable pci code in AR9344_BASE
* enable ath_pci and the firmware loading bits in DB120
* add in the relevant hints in DB120.hints to inform the probe/attach
code where the PCIe fixup data is for the onboard chip.
This is only relevant for a default development board. I also have a
DB120 with the on-board PCIe wifi NIC disabled and it's exposed as
a real PCIe slot (to put normal PCIe NICs in); the fixup code will need
to be disabled to make this work correctly.
Tested:
* DB120
a call of pager_swap_freespace() was moved around, now leading to freeing
the incorrect page because of the pindex changes after vm_page_rename().
Get back to use the correct pindex when destroying the swap space.
Sponsored by: EMC / Isilon storage division
Reported by: avg
Tested by: pho
MFC after: 7 days
Some of the collisions that are occuring are due to flowtable lookups
that succeed but have an invalid lle - typically because the L2 adjacency
lookup hasn't completed. This would lead to a follow-up insert which
would then fail (ie, collision) and the code would fall through to doing
a slow-path L2/L3 lookup in the netinet/netinet6 code.
This patch simply aborts storing a new flowtable entry if the lle isn't
yet valid.
Whilst I'm here, add a new pcpu counter for the item so the number of
failures can be tracked separately from generic "collisions."
Reviewed by: glebius
MFC after: 10 days
Sponsored by: Netflix, Inc.
because we use the 1MiB section maps as they only need a single pagetable.
To allow this we only use pc relative loads to ensure we only load from
physical addresses until we are running from a known virtual address.
As a side effect any data from before or 64MiB after the kernel needs to
be mapped in to be used. This should not be an issue for kernels loaded
with ubldr as it places this data just after the kernel. It will be a
problem when loading directly from anything using the Linux ABI that
places the ATAG data outside this range, for example U-Boot.
Currently we have 3 usage patterns:
1) nd6_output (most traffic flow, no lle supplied, lle RLOCK sufficient)
2) corner cases for output (no lle, STALE lle, so on). lle WLOCK needed.
3) nd* iunternal machinery (WLOCK'ed lle provided, perform packet queing).
We separate case 1 and implement it inside its only customer - nd6_output.
This leads to some code duplication (especialy SEND stuff, which should be
hooked to output in a different way), but simplifies locking and control
flow logic fir nd6_output_lle.
Reviewed by: ae
MFC after: 3 weeks
Sponsored by: Yandex LLC
Add gpioled(4) to BEAGLEBONE kernel and add the description of the four
on-board leds of beaglebone-black to its DTS file.
Approved by: adrian (mentor, implicit)
change the gpio children can be described as directly connected to the GPIO
controller without the need of describing the OFW GPIO bus itself on the
DTS file.
With this commit the OFW GPIO bus is fully functional on BBB and RPi.
GPIO controllers which want to use the OFW GPIO bus will need similar
changes.
Approved by: adrian (mentor, implicit)
This change makes ofw_iicbus attach to iicbb(4) controllers in addition to
the already supported i2c host bridges (iichb).
On iicbb(4) allow the direct access of the OFW parent node by its children,
so they can be directly attached to iicbb(4) node on the DTS without the
need of describing the i2c bus.
Approved by: adrian (mentor, implicit)
gpioled(4).
Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for
the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx)
used as reference for a non OFW-based system.
Update the gpioled(4) and gpioiic(4) man pages with some details and
examples about the FDT/OFW support.
Some compatibility details pointed out by imp@ will follow in subsequent
commits.
Approved by: adrian (mentor, implicit)
describe GPIO bindings in the system.
Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between
the OFW and the non OFW versions of GPIO bus.
Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus.
Approved by: adrian (mentor, implicit)
- Get USB input report length from HID descriptor.
- Use 1 finger TAP for devices which has no integrated button.
- Move data buffer to softc instead of allocating it.
MFC after: 1 week
