The resolver in libc creates a kqueue for watching a single file descriptor.
This can be done using poll() which should be lighter on the kernel and
reduce possible problems with rlimits (file descriptors, kqueues).
Reviewed by: jhb
one significant difference: for LIB32 builds both TARGET_ARCH
and MACHINE_ARCH are defined. TARGET_ARCH confusingly holds the
architecture of the host (e.g. amd64), while MACHINE_ARCH holds
the architecture were trying to build (e.g. i386). With both
set and different, r260022 changed the behaviour to interpret
the condition as building a cross-amd64 libkvm on i386, when
obviously we're trying to build an i386 version on amd64. When
COMPAT_32BIT is defined, we're building LIB32 and ignore the
value of TARGET_ARCH as we did before.
These files are required to get packages in ports to build against atf and
also to get a couple of currently-failing tests to pass.
I'm following the approach already used by the libusb pkg-config files
installed by the system regarding the location and the install rules.
MFC after: 5 days
As a result, the kernel needs to process shorter pathnames if fts is not
changing directories (if fts follows symlinks (-L option to utilities), fts
cannot open "." or FTS_NOCHDIR was specified).
Side effect: If pathnames exceed PATH_MAX, [ENAMETOOLONG] is not hit at the
stat stage but later (opendir or application fts_accpath) or not at all.
Because we respect the FreeBSD src tree layout under /usr/tests, and because
the layout of the tests in the atf distfile does not match the former, the
tests for atf-c++ were not able to find the process_helper binary.
Fix this by explicitly hardcoding the right path in the FreeBSD test suite.
Obtained from: atf (git 1f0e878f7f127741a3762883ef24aef317e239d5)
MFC after: 1 week
Put test programs for internal modules into a 'detail' subdirectory of the
libatf-c and libatf-c++ test directories, just as the upstream distribution
does. This is necessary because the tests assume such layout to find the
process_helper program, and currently fail because of this divergence.
MFC after: 1 week
* Set errno to EAFNOSUPPORT if an address is provided which is neither
AF_INET nor AF_INET6.
* Don't modify the arguments.
* Don't smash the stack when provided with a non-zero port.
* Handle the case correctly where the first address provided is
an IPv6 address.
MFC after: 3 days
4370 avoid transmitting holes during zfs send
4371 DMU code clean up
illumos/illumos-gate@43466aae47
NOTE: Make sure the boot code is updated if a zpool upgrade is
done on boot zpool.
MFC after: 2 weeks
* msun/man/sinh.3:
* msun/man/tanh.3:
. Fix grammar.
* msun/src/e_coshl.c:
* msun/src/e_sinhl.c:
. Fix comment.
* msun/src/s_tanhl.c:
. Remove unused variables.
. Fix location/indentation of comments.
. Use comparison involving ints instead of long double.
. Re-order polynomial evaluation on ld128 for |x| < 0.25.
For now, retain the older order in an "#if 0 ... #else" block.
. Use int comparison to short-circuit the |x| < 1.5 condition.
Requested by: bde
. Hook coshl, sinhl, and tanhl into libm.
. Create symbolic links for corresponding manpages.
. While here remove a nearby extraneous space.
* Symbol.map:
* src/math.h:
. Move coshl, sinhl, and tanhl to their proper locations.
* man/cosh.3:
* man/sinh.3:
* man/tanh.3:
. Update the manpages.
* src/e_cosh.c:
* src/e_sinh.c:
* src/s_tanh.c:
. Add weak reference for LBDL_MANT_DIG==53 targets.
* src/imprecise.c:
. Remove the coshl, sinhl, and tanhl kludge.
* src/e_coshl.c:
. ld80 and ld128 implementation of coshl().
* src/e_sinhl.c:
. ld80 and ld128 implementation of sinhl().
* src/s_tanhl.c:
. ld80 and ld128 implementation of tanhl().
Obtained from: bde (mostly), das and kargl
* ld128/k_expl.h:
. Split out a computational kernel,__k_expl(x, &hi, &lo, &k) from expl(x).
x must be finite and not tiny or huge. The kernel returns hi and lo
values for extra precision and an exponent k for a 2**k scale factor.
. Define additional kernels k_hexpl() and hexpl() that include a 1/2
scaling and are used by the hyperbolic functions.
* ld80/s_expl.c:
* ld128/s_expl.c:
. Use the __k_expl() kernel.
Obtained from: bde
file as follows:
1. Common ia64-specific support functions have the ia64_ prefix.
2. Functions that work on physical cores have the phys_ prefix.
3. Functions that work on virtual cores have the virt_ prefix.
With that:
1. _kvm_kvatop() has been renamed to phys_kvatop() as it handles
physical cores only.
2. The new _kvm_kvatop() is nothing but a wrapper that calls either
phys_kvatop() or virt_kvatop() by virtue of the kvatop function
pointer in the vmstate structure.
3. virt_kvatop() is nothing but a wrapper around virt_addr2off().
4. virt_addr2off() iterates over the Phdrs to find the segment in
which the address falls and return the file offset for it.
Now it's up to the kernel to populate the core file appropriately.
produced will be called libkvm-${ARCH} instead of libkvm. This allows
installing it alongside the native version.
For symbol lookups, use ps_pglobal_lookup() instead of __fdnlist()
when building a cross libkvm. It is assumed that the cross tool that
uses the cross libkvm also provides an implementation for this
proc_services function.
Note that this commit does not change any of the architecture-specific
code for cross-compilation.
- Add a generic routine to trigger an LVT interrupt that supports both
fixed and NMI delivery modes.
- Add an ioctl and bhyvectl command to trigger local interrupts inside a
guest. In particular, a global NMI similar to that raised by SERR# or
PERR# can be simulated by asserting LINT1 on all vCPUs.
- Extend the LVT table in the vCPU local APIC to support CMCI.
- Flesh out the local APIC error reporting a bit to cache errors and
report them via ESR when ESR is written to. Add support for asserting
the error LVT when an error occurs. Raise illegal vector errors when
attempting to signal an invalid vector for an interrupt or when sending
an IPI.
- Ignore writes to reserved bits in LVT entries.
- Export table entries the MADT and MP Table advertising the stock x86
config of LINT0 set to ExtInt and LINT1 wired to NMI.
Reviewed by: neel (earlier version)
clang-specific or gcc-specific flags, introduce the following new
variables for use in Makefiles:
CFLAGS.clang
CFLAGS.gcc
CXXFLAGS.clang
CXXFLAGS.gcc
In bsd.sys.mk, these get appended to the regular CFLAGS or CXXFLAGS for
the right compiler.
MFC after: 1 week
directory is like any subdirectory and as such needs to use a real
cluster number. To this end, keep a DE structure for the root in
the DOS_FS structure and populate it accordingly.
While here:
o allow consecutive path separators by skipping them all.
o add missing $FreeBSD$ keyword to dosfs.h.
code more naive and robust:
1. When setting ev_value, also always set ev_flags appropriately
2. Always check ev_value and ev_flags before calling free.
Both the value and the EV_DYNAMIC property can come directly from the
consumers of the environment functionality, so it's good to be careful.
And since this code is typically not looked at for long periods of
time, it's good to have it be a little "dumb-looking".
Trigger case for the bug:
env_setenv("foo", 0, "1", NULL, NULL);
env_setenv("foo", 0, "2", NULL, NULL);
Obtained from: Juniper Networks, Inc.
callers treat the MSI 'addr' and 'data' fields as opaque and also lets
bhyve implement multiple destination modes: physical, flat and clustered.
Submitted by: Tycho Nightingale (tycho.nightingale@pluribusnetworks.com)
Reviewed by: grehan@
Get rid of the msg_peek() function, which has a problem. If there was less
data in the socket buffer than requested by the caller, the function would busy
loop, as select(2) will always return immediately.
We can just receive nvlhdr now, because some time ago we splitted receive of
data from the receive of descriptors.
MFC after: 1 week
owning the handle passed to __cxa_finalize() but which are registered
by other dso, when the process is inside exit(3).
Running them makes the destruction order wrong, and there is hope that
such destructors would not call dlclose(3), since it is pointless at
this stage of the process existence.
The change effectively disables the r211706 after the exit(3) is
called.
Reported and tested by: Michael Gmelin <freebsd@grem.de>
Analyzed by: dim
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This is in the process of being submitted to the upstream LLDB
repository. The thread list functionality is modelled in part on
GDBRemoteCommunicationClient.
LLDB bug pr16696 and code review D2267
Sponsored by: DARPA, AFRL
giving access to functionality that is not available in capability mode
sandbox. The functionality can be precisely restricted.
Start with the following services:
- system.dns - provides API compatible to:
- gethostbyname(3),
- gethostbyname2(3),
- gethostbyaddr(3),
- getaddrinfo(3),
- getnameinfo(3),
- system.grp - provides getgrent(3)-compatible API,
- system.pwd - provides getpwent(3)-compatible API,
- system.random - allows to obtain entropy from /dev/random,
- system.sysctl - provides sysctlbyname(3-compatible API.
Sponsored by: The FreeBSD Foundation
by hastctl(8), hastd(8) and auditdistd(8) and will soon be also used
by casperd(8) and its services. There is no documentation and pjdlog.h
header file is not installed in /usr/include/ to keep it private.
Unfortunately we don't have /lib/private/ at this point, only
/usr/lib/private/, so the library is installed in /lib/.
Sponsored by: The FreeBSD Foundation
shifts into the sign bit. Instead use (1U << 31) which gets the
expected result.
This fix is not ideal as it assumes a 32 bit int, but does fix the issue
for most cases.
A similar change was made in OpenBSD.
Discussed with: -arch, rdivacky
Reviewed by: cperciva
requires process descriptors to work and having PROCDESC in GENERIC
seems not enough, especially that we hope to have more and more consumers
in the base.
MFC after: 3 days
it is all in the one place again. Rename libc/iconv/iconv.c to
bsd_iconv.c. Compile the wrappers into libc.a so that WITHOUT_DYNAMICROOT
works again.
Discussed with: kib (and partly stolen from his patch)
3-clause BSD license as specified by Oracle America, Inc. in 2010.
This license change was approved by Wim Coekaerts, Senior Vice
President, Linux and Virtualization at Oracle Corporation.
bhyve supports a single timer block with 8 timers. The timers are all 32-bit
and capable of being operated in periodic mode. All timers support interrupt
delivery using MSI. Timers 0 and 1 also support legacy interrupt routing.
At the moment the timers are not connected to any ioapic pins but that will
be addressed in a subsequent commit.
This change is based on a patch from Tycho Nightingale (tycho.nightingale@pluribusnetworks.com).
when there is an invalid character in the output codeset while it is
valid in the input. However, POSIX requires iconv() to perform an
implementation-defined conversion on the character. So, Citrus iconv converts
such a character to a special character which means it is invalid in the
output codeset.
This is not a problem in most cases but some software like libxml2 depends
on GNU's behavior to determine if a character is output as-is or another form
such as a character entity (&#NNN;).
unlocking the rtld bind lock results in the processing of ast and
recursing into the check_deferred_signal(). Nested execution of
check_deferred_signal() delivers the signal to user code and clears
si_signo. On return, top-level check_deferred_signal() frame
continues delivering the same signal one more time, but now with zero
si_signo.
Fix this by adding a flag to indicate that deferred delivery is
running, so check_deferred_signal() should avoid doing anything. Since
user signal handler is allowed to modify the passed machine context to
make return from the signal handler to cause arbitrary jump, or do
longjmp(). For this case, also clear the flag in thr_sighandler(),
since kernel signal delivery means that nested delivery code should
not run right now.
Reported by: Vitaly Magerya <vmagerya@gmail.com>
Reviewed by: davidxu, jilles
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
to inject edge triggered legacy interrupts into the guest.
Start using the new API in device models that use edge triggered interrupts:
viz. the 8254 timer and the LPC/uart device emulation.
Submitted by: Tycho Nightingale (tycho.nightingale@pluribusnetworks.com)
SSL_set_tlsext_host_name(3) internally does not modify the host buffer
pased to it. So it is safe to DECONST the struct url* here.
Reported by: gjb
Approved by: bapt (implicit)
MFC after: 1 week
X-MFC-With: r258347
SNI is Server Name Indentification which is a protocol for TLS that
indicates the host that is being connected to at the start of the
handshake. It allows to use Virtual Hosts on HTTPS.
Submitted by: sbz
Submitted by: Michael Gmelin <freebsd@grem.de> [1]
PR: kern/183583 [1]
Reviewed by: des
Approved by: bapt
MFC after: 1 week
- Add ' to the list of directly encoded characters and * to the list of
optionally directly encoded characters as per RFC 2152.
- In _citrus_UTF7_mbtoutf16 on end of input when the next output character
has only been partially decoded, save a copy of the buffer of input
characters (not just its length). On the next call with more input
characters this buffer is reprocessed together with the new input to
form a fully decoded output character.
- At the end of a base64 encoded sequence fully discard '-' (BASE64_OUT)
by decrementing psenc->chlen and i. This is needed to make room in
psenc->ch (input buffer) in case the next input character starts a new
base64 encoded sequence. And also, if this is the end of input and no
output character can be returned, this brings the encoder in the initial
state as indicated by _citrus_UTF7_stdenc_get_state_desc_generic which
is used by the caller to distinguish between no output and partial
output.
- In _citrus_UTF7_mbrtowc_priv pass the s parameter (input pointer)
directly to _citrus_UTF7_mbtoutf16 instead of a copy (s0). This way s
is updated correctly in case of errors.
- In _citrus_UTF7_mbrtowc_priv when called with psenc->surrogate set
(previous call did not have enough input), retrieve the previously
decoded UTF-16 character from (psenc->cache >> psenc->bits) instead of
(psenc->cache >> 2).
MFC after: 5 days
When building various programs from a single Makefile, program-specific
variables are of the form <VAR>.<PROG>, not <VAR>_<PROG>. Fix this
obvious typo to fix the build when WITH_TESTS=yes.
I am not sure how this ever worked before given that manual inspection
of bsd.progs.mk clearly shows that the expected character between the
two components is a dot and not an underscore... but I suspect the
changes in r258095 exposed this oddity.
Approved by: rpaulo (mentor)
FreeBSD systems usually implemented this as a third party module and
our implementation hasn't played as nicely with the old way as it could
have.
To that end:
* Rename the iconv* symbols in libc.so.7 to have a __bsd_ prefix.
* Provide .symver compatability with existing 10.x+ binaries that
referenced the iconv symbols. All existing binaries should work.
* Like on Linux/glibc systems, add a libc_nonshared.a to the ldscript
at /usr/lib/libc.so.
* Move the "iconv*" wrapper symbols to libc_nonshared.a
This should solve the runtime ambiguity about which symbols resolve
to where. If you compile against the iconv in libc, your runtime
dependencies will be unambiguous.
Old 9.x libraries and binaries will always resolve against their
libiconv.so.3 like they did on 9.x. They won't resolve against libc.
Old 10.x binaries will be satisified by the .symver helpers.
This should allow ports to selectively compile against the libiconv
port if needed and it should behave without ambiguity now.
Discussed with: kib
upcoming in-kernel device emulations like the HPET.
The ioctls VM_IOAPIC_ASSERT_IRQ and VM_IOAPIC_DEASSERT_IRQ are used to
manipulate the ioapic pin state.
Discussed with: grehan@
Submitted by: Tycho Nightingale (tycho.nightingale@pluribusnetworks.com)
ludes minor changes relative to upstream, for compatibility with
FreeBSD's in-tree LLVM 3.3:
- Reverted LLDB r191806, restoring use of previous API.
- Reverted part of LLDB r189317, restoring previous enum names.
- Work around missing LLVM r192504, using previous registerEHFrames API
(limited functionality).
- Removed PlatformWindows header include and init/terminate calls.
Sponsored by: DARPA, AFRL
Move the installation of /usr/tests/lib/Kyuafile from src/tests/lib/
to src/lib/. This is to keep the src/tests/ hierarchy unaware of the
rest of the tree, which makes things clearer in general. In particular:
1) Everything related to the construction of /usr/tests/lib/ is kept
in src/lib/. There is no need to think about different directories
and how they relate to each other. (The same applies for libexec,
usr.bin, etc. but these are not yet handled.)
2) src/tests becomes the place to keep cross-functional test programs
and nothing else, which also helps in simplifying things.
Reviewed by: freebsd-testing
Approved by: rpaulo (mentor)
There is no reason to keep the two knobs separate: if tests are
enabled, the ATF libraries are required; and if tests are disabled,
the ATF libraries are not necessary. Keeping the two just serves
to complicate the build.
Reviewed by: freebsd-testing
Approved by: rpaulo (mentor)
* Use bit twiddling. This requires inclusion of math_private.h
and inclusion of float.h in s_roundl.c. Raise invalid exception.
* Use literal integer constants where possible. Let the compiler
do the appropriate conversion.
* In s_roundf.c, use an F suffix on float constants instead of
promoting float to double and then converting the result back
to float. In s_roundl.c, use an L suffix.
* In s_roundl.c, use the ENTERI and RETURNI macros. This requires
the inclusion of fpmath.h and on __i386__ class hardware ieeefp.h.
Reviewed by: bde
process if it has not already been stopped, since this is required for
ptrace(2) to work.
libdtrace does not seem to stop target processes before trying to remove
their breakpoints, so we were previously failing to remove the breakpoint
on r_debug_state() in rtld. This was causing processes to die with SIGTRAP
if they called dlopen(3) after dtrace(1) had detached.
Reported by: symbolics@gmx.com
Reviewed by: rpaulo
MFC after: 1 month
This explanation is supposed to be simpler and better. In particular
"comparing it to the snprintf API provides lots of value, since it raises the
bar on understanding, so that programmers/auditors will a better job calling
all 3 of these functions."
Requested by: deraadt@cvs.openbsd.org
Obtained From: OpenBSD
Reviewed by: cperciva
good. This caused libc to spoof the ports libiconv namespace and
provide a colliding libiconv.so.3 to fool rtld. This should have
been removed some time ago.
Unexpand the tag, remove the fbsd:nokeywords property and add the
svn:keywords property. This should eliminate the gratuituous diffs
that appear on these files in projects branches.
Sponsored by: The FreeBSD Foundation
* Don't print any error messages to stderr unless DEBUG is defined.
* Add a DPRINTFX macro for use when errno isn't set.
* Print the error string from libelf when appropriate.
The number of ways to indicate this confuses people.
PR: docs/100196
Reported by: "Dr. Markus Waldeck" <waldeck@gmx.de>
Reported by: Jamie Landeg Jones <jamie.landeg.jones@gmail.com>
Populate /usr/tests with the only test programs that currently live
in the tree (those in lib/libcrypt/tests/) and add all the build
machinery to accompany this change.
In particular:
- Add a WITHOUT_TESTS variable that users can define to request that
no tests be put in /usr/tests.
- Add a top-level Kyuafile for /usr/tests and a way to create similar
Kyuafiles in top-level subdirectories.
- Add a BSD.tests.dist file to define the directory layout of
/usr/tests.
Submitted by: Julio Merino jmmv google.com
Reviewed by: sjg
MFC after: 2 weeks
user. Kqueue now saves the ucred of the allocating thread, to
correctly decrement the counter on close.
Under some specific and not real-world use scenario for kqueue, it is
possible for the kqueues to consume memory proportional to the square
of the number of the filedescriptors available to the process. Limit
allows administrator to prevent the abuse.
This is kernel-mode side of the change, with the user-mode enabling
commit following.
Reported and tested by: pho
Discussed with: jmg
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
_citrus_mapper_close again and result in a deadlock otherwise.
This is similar to NetBSD PR/24023 (fixed in their r1.5 of this file).
PR: bin/182994
Submitted by: Fabian Keil <fk fabiankeil de>
MFC after: 3 days
Even though not all race conditions can be fixed if the 'e' option is not
used, still fix some race conditions using pipe2():
* Prevent both ends of the pipe from leaking to a concurrent popen().
* Prevent the child process's end of the pipe from leaking to any concurrent
fork and exec.
This change also simplifies the code.
This change introduces a new plain.test.mk file that provides the build
infrastructure to build test programs that don't use any framework.
Most of the code previously in bsd.test.mk moves to plain.test.mk and
atf.test.mk is extended with the missing pieces.
In doing so, this change pushes all test program building logic to the
various *.test.mk files instead of trying to reuse some tiny bits.
In fact, this attempt to reuse some definitions makes the code harder
to read and harder to extend.
The clear benefit of this is that the interface of bsd.test.mk is now
clearly delimited.
Submitted by: Julio Merino jmmv google.com
MFC after: 2 weeks
'invpcid' instruction to the guest. Currently bhyve will try to enable this
capability unconditionally if it is available.
Consolidate code in bhyve to set the capabilities so it is no longer
duplicated in BSP and AP bringup.
Add a sysctl 'vm.pmap.invpcid_works' to display whether the 'invpcid'
instruction is available.
Reviewed by: grehan
MFC after: 3 days
tools would need to know about the counter_u64_t type. Allow to include
sys/counter.h from userspace.
- Utilize now defined type in kvm_counter_u64_fetch().
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
Only accept 'net' and 'pxe' devices as underlying transport
in tftp.c on x86. Prior to this change tftp code would attempt
to send packets over any boot device, including zfs one with
predictably sad results.
Approved by: re (gjb)
MFC After: 1 month
