- Use refcount_init().
- Define an INVARIANTS-only zone destructor to assert that various
bits of PCB state aren't left dangling.
- Annotate unp_pcb_rele() with __result_use_check.
- Simplify control flow.
Reviewed by: glebius, kevans, kib
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26295
- Define a locking key for unpcb members.
- Rewrite some of the locking protocol description to make it less
verbose and avoid referencing some subroutines which will be renamed.
- Reorder includes.
Reviewed by: glebius, kevans, kib
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26294
The first issue was lack of quoting around INSTALLFLAGS, which set it
incorrectly and produced an error on -M.
The second issue was that we weren't actually doing the install in
unprivileged mode, making it effectively useless. This was designed to pass
through the proper metalog/unpriv flags to install(1), so just let it
happen.
MFC after: 3 days
(default: WITH_GH_BC) and 12-STABLE (default: WITHOUT_GH_BC).
Since the new implementation of bc and dc is optionally available in
12-STABLE, I intend to MFC these descriptions for inclusion in 12.2.
MFC after: 3 days
It's included by header pollution in most of the compile
environments. However, in the standalone envirnment, it's not
included. Go ahead and include it always since the overhead is low and
it is simpler that way.
MFC After: 3 days
- Exit with an error if no path is specified.
- Man page typo.
- Error message typo.
Reviewed by: kib
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26376
In D12421, the ability to compile stand/ in little-endian was added, with the
intention to extend loader.kboot to run in Petitboot.
However, no further work was done, as the kernel then gained self-execution
capabilities as Petitboot was taught to load FreeBSD kernels directly.
The FreeBSD installer on powerpc64 (on POWER8 and POWER9) uses
/boot/etc/kboot.conf instead of loader.
As this option does nothing but cause stand/ to be miscompiled and actively
causes confusion, remove it.
(I have a functioning petitboot loader in my local tree, however, it turned
out to be quite inconvient to use due to the current petitboot plugin design
so I put it on hold.)
Reviewed by: emaste, imp, jhibbits
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D26430
When we bring in geli into the boot loader, we are single threaded so
we don't have to worry about locking. We have no mutexes, and don't need
to use them, so comment it out.
MFC After: 3 days
We don't need to do the busy dance for this driver. It's handled by
destroy_dev() entirely. Since all we did was busy/unbusy in
open/close, just delete them. We therefore don't need to track closes
either.
Reviewed by: ian@
Differential Revision: https://reviews.freebsd.org/D26431
in stand.h typically, but when this is included we can define it
multiple times. However, we don't define bool in stand.h at the
moment, so allow it to be defined inside types.h when we're building
for the standalone environment.
MFC After: 3 days
vendor ID string to say just "Microchip Technology" -- the buyout of
Standard Microsystems happened in 2012 and the SMC/SMSC names are pretty
much retired at this point.
PR: 241406
* Remove identical or almost identical headers
* Only build aout.c on amd64 and i386. None of the the other current
architectures ever supported running a.out binaries
* Enable on all architectures
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D26369
Use MACHINE_CPUARCH with arm64 (aarch64) when we build code that could run
on any 64-bit Arm instruction set. This will simplify checks in downstream
consumers targeting prototype instruction sets.
The only place we check for MACHINE_ARCH == aarch64 is when building the
device tree blobs. As these are targeting current generation ISAs.
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D26370
Currently, the only thing that prevents a functioning 64-bit FICL build is
a few integer types that were intended to be fixed-width.
Changing them to C99 integer types allows building a functioning 64-bit
FICL.
While this isn't applicable to the default settings of any in-tree loaders,
it is necessary for a future Petitboot loader, due to the requirement that
it be compiled as a 64-bit program.
Reviewed by: tsoome, imp (earlier revision)
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D26364
On ibm,extended-clock-frequency, ensure we be64toh() the value.
On clock-frequency, remove the right-shifting hack (which was needed due to
reading a 32 bit value into a 64 bit variable) and switch to OF_getencprop()
for reading (which will handle endian conversion internally.)
Reviewed by: jhibbits (in irc)
Sponsored by: Tag1 Consulting, Inc.
There are a couple of places in the tree that directly parse the newvers.sh
script looking for the BRANCH variable. I found two locations, one in
release/Makefile and the other in bin/freebsd-version/Makefile.
While there is a good argument that BRANCH_OVERRIDE should properly
propagate in those circumstances and the new behavior is thus better, the
reality is this change broke freebsd-update's ability to find timestamps in
binaries and resulted in a large number of gratuitous changes.
Reported by: freebsd-update
Discussed with: cperciva
MFC after: 1 day
for it to sit in the syscall fast path.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D26368
Add enough infrastructure for interrupts on children of the pl061 GPIO
controller. As gpiobus already provided these the pl061 driver also needs
to pass requests up the newbus hierarchy.
Currently there are no children that expect to configure interrupts, however
this is expected to change to support the ACPI Event Information interface.
Sponsored by: Innovate UK
I have been trying to reduce the time that testsuite runs take for CheriBSD
on QEMU (currently about 22 hours). One of the slowest tests is pfctl_test:
Just listing the available test cases currently takes 98 seconds on a
CheriBSD RISC-V system due to all the processes being spawned. This trivial
patch reduces the time to 92 seconds. The better solution would be to
rewrite the test in C/C++ which I may do as a follow-up change.
Reviewed By: kp
Differential Revision: https://reviews.freebsd.org/D26417
that can be extended, but also ensure compile-time type checking. Refactor
common code out of arch-specific implementations. Move the mpr and mps
drivers to this new API. The template type remains visible to the consumer
so that it can be allocated on the stack, but should be considered opaque.
The change in D26397 will need a __FreeBSD_version to base off of for
bootstrapping crunchgen, to avoid avoidable build failures just because the
host has an outdated crunchgen.
asomers@ reported a crash on an NFSv4.0 server with a backtrace of:
kdb_backtrace
vpanic
panic
nfsrv_docallback
nfsrv_checkgetattr
nfsrvd_getattr
nfsrvd_dorpc
nfssvc_program
svc_run_internal
svc_thread_start
fork_exit
fork_trampoline
where the panic message was "docallb", which indicates that a callback
was attempted when the ClientID is unconfirmed.
This would not normally occur, but it is possible to have an unconfirmed
ClientID structure with delegation structure(s) chained off it if the
client were to issue a SetClientID with the same "id" but different
"verifier" after acquiring delegations on the previously confirmed ClientID.
The bug appears to be that nfsrv_checkgetattr() failed to check for
this uncommon case of an unconfirmed ClientID with a delegation structure
that no longer refers to a delegation the client knows about.
This patch adds a check for this case, handling it as if no delegation
exists, which is the case when the above occurs.
Although difficult to reproduce, this change should avoid the panic().
PR: 249127
Reported by: asomers
Reviewed by: asomers
MFC after: 1 week
Differential Revision: https://reviews.freebbsd.org/D26342
To make it easier to work with this in the future, convert to c99
designated initializer syntax.
Tested on powerpc, powerpc64, and powerpc64le. No functional change.
Sponsored by: Tag1 Consulting, Inc.
The intention of the bus_be naming was for those to be the no-endian-swapping
and for the bus_le to be endian-swapping in all the functions.
This naming breaks down when we're actually are running in LE and need to
use the opposite sense.
As such, rename bs_be_* to native_bs_* and rename bs_le_* to swapped_bs_*.
No functional change.
Sponsored by: Tag1 Consulting, Inc.
Swap the BE and LE bus_space tags when on LE, and adjust the nexus tag
to match.
This is prep for a a followup that makes the powerpc bus_space macros easier
to maintain in the future.
Sponsored by: Tag1 Consulting, Inc.
Prior to this commit, EC2 AMIs used a "dual-dhclient" tool which was
launched in place of dhclient and spawned both the base system dhclient
for IPv4 and the ISC dhclient from ports for IPv6.
Now that rtsold supports the "M bit" (managed configuration), we can go
back to having the base system dhclient spawned normally, and provide a
script to rtsold which spawns the ISC dhclient from ports when rtsold
decides that it is appropriate.
Thanks to: bz
MFC after: 1 week
Sponsored by: https://www.patreon.com/cperciva
The FreeBSD base system continues to expand. 4GB is now insufficient;
we passed 3 GB in May 2019; we passed 2 GB in August 2017. Over half
of the disk space used is in /usr/lib/debug/.
Without this change, instances boot but are unusable, since the first
thing which breaks when VM filesystems are too small is the "pkg install"
in the VM building process.
Implement pmap_mincore() for moea64.
This will need some slight tweaks when large page support in HPT lands.
Submitted by: Fernando Eckhardt Valle <fernando.valle@eldorado.org.br>
Reviewed by: bdragon
Differential Revision: https://reviews.freebsd.org/D26314
Fixes for Raspberry Pi 4B PCIe / USB:
- Pass through a DMA tag for the controller.
- In theory the controller can access the lower 3 GB, but testing found
that unreliable. OpenBSD also restricts DMA to the lowest 960 MiB.
- Rename some constants to be a bit more meaningful.
Submitted by: Robert Crowston, crowston at protonmail.com
Reviewed by: mkarels, outside reviewers
Differential Revision: https://reviews.freebsd.org/D26344
