These processors may not be supported yet, but add them for completion.
POWER9 is planned for support. e300 may work (based on 603e core).
P5040/P5021 are similar to P5020, so should work as well. One addition is
needed for P5040, to support the number of LAWs, and will be a separate commit.
In integrity mode, a larger logical sector (e.g., 4096 bytes) spans several
physical sectors (e.g., 512 bytes) on the backing device. Due to hash
overhead, a 4096 byte logical sector takes 8.5625 512-byte physical sectors.
This means that only 288 bytes (256 data + 32 hash) of the last 512 byte
sector are used.
The memory allocation used to store the encrypted data to be written to the
physical sectors comes from malloc(9) and does not use M_ZERO.
Previously, nothing initialized the final physical sector backing each
logical sector, aside from the hash + encrypted data portion. So 224 bytes
of kernel heap memory was leaked to every block :-(.
This patch addresses the issue by initializing the trailing portion of the
physical sector in every logical sector to zeros before use. A much simpler
but higher overhead fix would be to tag the entire allocation M_ZERO.
PR: 222077
Reported by: Maxim Khitrov <max AT mxcrypt.com>
Reviewed by: emaste
Security: yes
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12272
In particular this eliminates function calls and related register save/restore
when only few writes would suffice.
Example speed up can be seen in a fstat microbenchmark on AMD Ryzen cpus, where
the throughput went up by ~4.5%.
Thanks to cem@ for benchmarking and reviewing the patch.
MFC after: 1 week
Scan all buses for CSR bus, not stopping on the first failed
match. Scan all slots for function 0 on the found bus, for instance on
IvyBridge the slot 0 is not decoded at all. Since the scan is quite
unsafe, and access to the buses is mostly useful for developers,
enable the csr buses scan with the tunable.
Current qpi.c makes too many assumptions about the uncore
configuration buses location and about slots occupied. Also it
restricts itself only to Nehalem CPUs. It is needed on all Core-based
Xeons. On the 2600 v2 (IvyBridge) machine I have access to, the CSR
buses have numbers 31 (BSP socket) and 63 (second socket), and there
is no functions pci0.31.0.0 or pci0.63.0.0. According to the CPU
datasheet, all devices on the uncore bus occupy slots >= 8.
Practically, the attach to config buses is required for the intel-pcm
pcm-memory.x tool to work, for instance.
Reviewed by: jhb (previous version)
Sponsored by: Mellanox Technologies
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D12268
remapping.
VT-d specification requires use of PCI rid as source id for IOAPICs
enumerated by PCI bus. The values from the DMAR ACPI table should be
only used when IOAPIC is not on PCI.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Hardware provided by: Intel
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D12205
the interrupt messages from given IOAPIC, if the IOAPIC can be
enumerated on PCI bus.
If IOAPIC has PCI binding, match the PCI device against MADT
enumerated IOAPIC. Match is done first by registers window physical
address, then by IOAPIC ID as read from the APIC ID register.
PCI bsf address of the matched PCI device is the rid.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Hardware provided by: Intel
MFC after: 2 weeks
X-Differential revision: https://reviews.freebsd.org/D12205
The -S flag is currently ignored for builds since we filter through
tools/install.sh that is intended for both non-root and cross-builds.
Sponsored by: Dell EMC Isilon
X-MFC-With: r322565
This provides port stats (updated once per second) in
dev.bnxt.X.port_stats for PFs. VFs do not have access to the port stats.
Submitted by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed by: shurd, sbruno
Approved by: sbruno (mentor)
Sponsored by: Broadcom Limited
Differential Revision: https://reviews.freebsd.org/D11914
Any geom class using g_metadata_store, as well as geom_virstor which
duplicated g_metadata_store internally, would dump sectorsize - mdsize bytes
of userspace memory following the metadata block stored. This is most or all
geom classes (gcache, gconcat, geli, gjournal, glabel, gmirror, gmultipath,
graid3, gshsec, gstripe, and geom_virstor).
PR: 222077 (comment #3)
Reported by: Maxim Khitrov <max AT mxcrypt.com>
Reviewed by: des
Security: yes
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12269
Do not use malloc(M_NOWAIT), wait is possible there, and the malloc
failures where not checked. Do not forget to free malloced memory.
Reported and tested by: pho
Approved by: sbruno
Sponsored by: The FreeBSD Foundation
We currently initialize the vm_page array in three passes: one to zero
the array, one to initialize the "order" field of each page (necessary
when inserting them into the vm_phys buddy allocator one-by-one), and
one to initialize the remaining non-zero fields and individually insert
each page into the allocator.
Merge the three passes into one following a suggestion from alc:
initialize vm_page fields in a single pass, and use vm_phys_free_contig()
to efficiently insert physical memory segments into the buddy allocator.
This reduces the initialization time to a third or a quarter of what it
was before on most systems that I tested.
Reviewed by: alc, kib
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D12248
17h supports MCA thresholding in the same way as 16h and earlier.
Supposedly a ScalableMca feature bit in CPUID 8000_0007:EBX must be set, but
that was not true for earlier models, so be careful about relying on it.
While here, document a missing bit in LS MCA MISC0.
Reviewed by: truckman
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12237
It doesn't seem necessary to busy the CPU while waiting to transition
into a different p-state.
PR: 221621 (related, but does not completely address)
Reviewed by: truckman
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12260
Add basic command line parsing test coverage for these utilities. The tests
were automatically generated based on their man pages. These tests can be
expanded by hand for more thorough coverage. The aim is to generate very
basic amount of test coverage for all the utilities in the base system.
Submitted by: shivansh
Reviewed by: asomers, brooks
MFC after: 3 weeks
Sponsored by: Google, Inc (GSoC 2017)
Differential Revision: https://reviews.freebsd.org/D12036
values. As not all assemblers understand the new ID_AA64MMFR2_EL1 register
add a macro to access it. This seems to be safe for older CPUs to read this
new register, with them returning zero.
Sponsored by: DARPA, AFRL
We need to extend the -Wno-format hack to yet another Makefile to cope
with %S meaning (CHAR16 *) not (wchar_t *) in the context of the EFI
boot loaders.
Sponsored by: Netflix
Split out asciidump, utf8dump, bindump, and hexdump into a separate
file efiutil.c. Implement new efi_print_load_option for printing out
the EFI_LOADER_OPTION data structure used to specify different options
to the UEFI boot manager.
Sponsored by: Netflix
efidp_size will return the size, in bytes, of a EFI device path
structure. This is a convenience wrapper in the same style as the
other linux routines. It's implemented by GetDevicePathSize from EDK2
we already needed for other things.
Sponsored by: Netflix
Rename boot1's wcslen to ucs2len, which we can't use in userland
because wchar in userland is unsigned, not short. Move it into
efichar.c. Also spell '* 2' as '* sizeof(efi_char)' and add 1 for the
trailing NUL to transition the FreeBSD boot env vars to being NUL
terminated on the same line...
Sponsored by: Netflix
