When our linker merges .SUNW_dof sections from multiple files, it simply
concatenates the DOF tables into one section. Previously, the USDT init
code in drti.o would only look at the first table in the DOF section; with
this change, it iterates over all the tables, passing each DOF table to
the kernel.
PR: 186821
Copying pages via temporary mappings in the !DMAP case of pmap_copy_pages()
involves updating the corresponding page tables followed by accesses to the
pages in question. This sequence is subject to the situation exactly described
in the "AMD64 Architecture Programmer's Manual Volume 2: System Programming"
rev. 3.23, "7.3.1 Special Coherency Considerations" [1, p. 171 f.]. Therefore,
issuing the INVLPG right after modifying the PTE bits is crucial (see also
r269050, MFCed to stable/10 in r269235).
For the amd64 PMAP code, the order of instructions was already correct. The
above fact still is worth documenting, though.
1: http://amd-dev.wpengine.netdna-cdn.com/wordpress/media/2012/10/24593_APM_v21.pdf
Reviewed by: alc
Sponsored by: Bally Wulff Games & Entertainment GmbH
- Copying and zeroing pages via temporary mappings involves updating the
corresponding page tables followed by accesses to the pages in question.
This sequence is subject to the situation exactly described in the "AMD64
Architecture Programmer's Manual Volume 2: System Programming" rev. 3.23,
"7.3.1 Special Coherency Considerations" [1, p. 171 f.]. Therefore, issuing
the INVLPG right after modifying the PTE bits is crucial.
For pmap_copy_page(), this has been broken in r124956 and later on carried
over to pmap_copy_pages() derived from the former, while all other places
in the i386 PMAP code use the correct order of instructions in this regard.
Fixing the latter breakage solves the problem of data corruption seen with
unmapped I/O enabled when running at least bare metal on AMD R-268D APUs.
However, this might also fix similar corruption reported for virtualized
environments.
- In pmap_copy_pages(), correctly set the cache bits on the source page being
copied. This change is thought to be a NOP for the real world, though. [2]
1: http://amd-dev.wpengine.netdna-cdn.com/wordpress/media/2012/10/24593_APM_v21.pdf
Submitted by: kib [2]
Reviewed by: alc, kib
Sponsored by: Bally Wulff Games & Entertainment GmbH
Don't save entropy inside jails.
As of r126744, we no longer feed the entropy device in jails upon
start, and collecting them is no longer useful.
PR: conf/126744
Submitted by: Eugene Grosbein <eugen grosbein net> (with minor changes)
Approved by: so (des)
Improve extreme rewind import.
When doing an "extreme rewind" import ("zpool import -XF"), we attempt
to verify all data in the pool, essentially scrubbing the entire pool.
The problem is that spa_load_verify_cb() issues an unbounded number of
concurrent scrub i/os. This can lead to all of memory being used for
these zio's, wedging the system. Like normal scrub, we need to put a
cap on the number of outstanding i/os, and have the traverse thread
block when we reach this cap.
For this purpose the cap can be very large (10,000) to optimize the
elevator algorithm. Three kernel tunables have been added:
vfs.zfs.spa_load_verify_maxinflight
vfs.zfs.spa_load_verify_metadata
vfs.zfs.spa_load_verify_data
The latter two tunables controls whether metadata and/or user data
when doing extreme rewind.
Make 'zpool import -T' imply scrub.
Make zpool import -T <txg> accept hexadecimal values for the txg when
prefixed with 0x.
Skip txg's for which there is no uberblock when doing extreme rewind.
Skip reading all user data twice by skipping prefetches when doing
extreme rewinds as we do not access via the ARC.
Illumos issues:
4970 need controls on i/o issued by zpool import -XF
4971 zpool import -T should accept hex values
4972 zpool import -T implies extreme rewind, and thus a scrub
4973 spa_load_retry retries the same txg
4974 spa_load_verify() reads all data twice
Fix ctl(4) kldload failure that manifested like this:
link_elf_obj: symbol icl_pdu_new_bhs undefined
PR: 192031
Submitted by: Nils Beyer (earlier version)
Sponsored by: FreeBSD Foundation
This brings VHD support to mkimg(1); both dynamic and fixed file formats.
Dynamic VHD and VMDK file images are now sparsely written, meaning that
"free" sectors do not occupy space.
Relnotes: yes
Add OBJ_TMPFS_NODE flag.
MFC r268616:
Set the OBJ_TMPFS_NODE flag for vm_object of VREG tmpfs node.
MFC r269053:
Correct assertion. tmpfs vm object is always at the bottom of
the shadow chain.
Generalize vn_get_ino() to allow filesystems to use custom vnode
producer. Convert inline copies of vn_get_ino() in msdosfs and cd9660
into the uses of vn_get_ino_gen().
Pending interrupt status is cleared by writing to the ISR, not the data reg.
Use named constant rather than '0' to access the reset controller register.
Map device memory using PTE_DEVICE attributes, and also ensure that the
shared flag is set on normal-memory mappings made via pmap_kenter() for SMP.
The "shared flag" part of this change isn't obvious from the diff, here's
the deal... by using the array of preformatted page table entry templates
instead of constructing the PTE from scratch, we automatically get the
right attribute bits set for both caching and shared.
Fix whitespace glitches.
Add a way to apply CFLAGS only when building the given architecture. This
is useful primarily on a system used for cross-building, when you have a
set of flags to apply to the TARGET_ARCH being cross-built but don't want
those settings applied to building the cross-tools or other components that
run on the build host machine.
Support CXXFLAGS.${MACHINE_ARCH} as well as CFLAGS. This allows different
C++ options for toolchain versus target when cross-building.
Set the malloc alignment to 64 bytes on platforms that use the U-Boot API
device drivers. Recent versions of u-boot run with the MMU enabled, and
require DMA-based I/O to be aligned to cache line boundaries.
Avoid possible cast degradation.
Assign iov_len first, avoiding the cast to uio_resid
(int in stdio) from degrading the value.
Small cosmetical fix while here.
r268640:
Allow multi-byte reads in the private CHELSIO_T4_GET_I2C ioctl. The
firmware allows up to 48B to be read this way but the driver limits
itself to 8B at a time to remain compatible with old cxgbetool
binaries.
r268989:
Add missing newline to an error message.
Run mtree for BSD.tests.dist during make xdev-install, if the tests are
enabled (which they are in the default configuration). Otherwise, it
will fail because ${XDDESTDIR}/usr/include/atf-c does not exist.
Calculate the amount of resident pages by looking in the objects chain
backing the region. Add a knob to disable the residency calculation at
all.
MFC r268490:
Unconditionally initialize addr to handle the case of changed map
timestamp while the map is unlocked.
MFC r268711:
Change the calculation of the kinfo_vmentry field kve_private_resident
to reflect its name.
MFC r268712:
Followup to r268466.
- Move the code to calculate resident count into separate function.
It reduces the indent level and makes the operation of
vmmap_skip_res_cnt tunable more clear.
- Optimize the calculation of the resident page count for map entry.
Skip directly to the next lowest available index and page among the
whole shadow chain.
- Restore the use of pmap_incore(9), only to verify that current
mapping is indeed superpage.
- Note the issue with the invalid pages.
Remove IO_SYNC flag when writing extended file attributes on ZFS.
While it is possible to create and write file, modify its permissions, etc.
without ever doing sync, it looks odd that it is required for setting
extended file attributes on ZFS. UFS does not do sync there too.
Samba uses those extended attributes to store some its data, and doing it
synchronously by many times reduces file creation performance for systems
without SLOG device.