Use REPORT LUNS command for SPC-2 devices with LUN 0 disconnected.
SPC-2 tells REPORT LUNS shall be supported by devices supporting LUNs other
then LUN 0. If we see LUN 0 disconnected, guess there may be others, and
so REPORT LUNS shall be supported.
Previous logic was not differentiating disconnected LUNs and absent targets.
That made it to stop scan if LUN 0 was not found for any reason. That made
problematic, for example, using iSCSI targets declaring SPC-2 compliance and
having no LUN 0 configured.
The new logic continues sequential LUN scan if:
-- we have more configured LUNs that need recheck;
-- this LUN is connected and its SCSI version allows more LUNs;
-- this LUN is disconnected, its SCSI version allows more LUNs and we
guess they may be connected (we haven't scanned first 8 LUNs yet or
kern.cam.cam_srch_hi sysctl is set to scan more).
Fix a clang 3.5 warning about abs(3) being given an argument of type
quad_t in setusercontext(). While here, sanitize the clamping of the
priority value, and use the correct type for the return value of
login_getcapnum().
Reviewed by: kib
To restore the default font using vidcontrol(1), use the "-f" flag
without an argument:
vidcontrol -f < /dev/ttyv0
PR: 193910
Differential Revision: https://reviews.freebsd.org/D971
Submitted by: Marcin Cieslak <saper@saper.info>
Reviewed by: ray@, emaste@
Approved by: ray@
MFC of: r273544
- Add a second Huawei SCSI eject command as USB mode switch config files
sometimes use one or the other. Maybe newer Huawei modems switched.
- Return USB_ERR_INVAL if the eject method is not known.
PR: 145319
Add two sysctl(8) to enable/disable NFSv4 server to check when setting
user nobody and/or setting group nogroup as owner of a file or directory.
Usually at the client side, if there is an username that is not in the
client's passwd database, some clients will send 'nobody@<your.dns.domain>'
in the wire and the NFSv4 server will treat it as an ERROR.
However, if you have a valid user nobody in your passwd database,
the NFSv4 server will treat it as a NFSERR_BADOWNER as its believes the
client doesn't has the username mapped.
Submitted by: Loic Blot <loic.blot@unix-experience.fr>
Reviewed by: rmacklem
Approved by: rmacklem
Sponsored by: QNAP Systems Inc.
When tunneling interface is going to insert mbuf into netisr queue after stripping
outer header, consider it as new packet and clear the protocols flags.
This fixes problems when IPSEC traffic goes through various tunnels and router
doesn't send ICMP/ICMPv6 errors.
PR: 174602
Sponsored by: Yandex LLC
The SYSCTL data pointers can come from userspace and must not be
directly accessed. Although this will work on some platforms, it can
throw an exception if the pointer is invalid and then panic the kernel.
Add a missing SYSCTL_IN() of "SCTP_BASE_STATS" structure.
Sponsored by: Mellanox Technologies
strict POSIX mode.
Put the htonl(), htons(), ntohl() and ntohs() declarations under
__POSIX_VISIBLE >= 200112. POSIX.1-2001 and newer require these to be
exposed from <netinet/in.h> (as well as <arpa/inet.h>).
Note that it may be unnecessary to check __POSIX_VISIBLE >= 200112 because
older versions of POSIX and the C standard do not define this header.
However, other places in the same file already perform the check.
PR: 188316
Submitted by: Christian Neukirchen
Also, remove #if __BSD_VISIBLE where it is redundant. When __BSD_VISIBLE is
defined to 1, __POSIX_VISIBLE, __XSI_VISIBLE and __ISO_C_VISIBLE are also
defined to the newest supported version.
PR: 188173
Implement PLPMTUD blackhole detection (RFC 4821), inspired by code
from xnu sources. If we encounter a network where ICMP is blocked
the Needs Frag indicator may not propagate back to us. Attempt to
downshift the mss once to a preconfigured value.
Note, this is turned off by default.
Allow the armv6 kernel to be build with PHYSADDR undefined. The kernel
will now find the virtual to physical mapping for libkvm to use at
runtime. This makes PHYSADDR redundant, however keep it around to give
everyone a chance to update their libkvm.
Allow libkvm to get the kernel va to pa delta without the need for
physaddr. This should allow for a kernel where PHYSADDR and KERNPHYSADDR
are both undefined.
For now libkvm will use the old method of reading physaddr and kernaddr
to allow it to work with old kernels. This could be removed in the future
when enough time has passed.
From https://sourceware.org/ml/newlib/2014/msg00113.html
By Richard Earnshaw at ARM
>
>GCC has for a number of years provides a set of pre-defined macros for
>use with determining the ISA and features of the target during
>pre-processing. However, the design was always somewhat cumbersome in
>that each new architecture revision created a new define and then
>removed the previous one. This meant that it was necessary to keep
>updating the support code simply to recognise a new architecture being
>added.
>
>The ACLE specification (ARM C Language Extentions)
>(http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.set.swdev/index.html)
>provides a much more suitable interface and GCC has supported this
>since gcc-4.8.
>
>This patch makes use of the ACLE pre-defines to map to the internal
>feature definitions. To support older versions of GCC a compatibility
>header is provided that maps the traditional pre-defines onto the new
>ACLE ones.
Stop using __FreeBSD_ARCH_armv6__ and switch to __ARM_ARCH >= 6 in the
couple of places in tree. clang already implements ACLE. Add a define
that says we implement version 1.1, even though the implementation
isn't quite complete.
Add an ability to set dumpdev via loader(8) tunable.
MFC r272747:
Revert r156046. We support setting dumpdev via loader tunable again.
Also change default disk name to ada.
Revert somewhat hackish geom_disk optimization, committed as part of r256880,
and the following r273143 commit, supposed to workaround introduced issue by
quite innocent-looking change.
While there is no clear understanding why, but r273143 is accused in data
corruption in some environments with high I/O load. I personally don't see
any problem in that commit, and possibly it is just a trigger to some other
bug somewhere, but better safe then sorry for now.
Requested by: scottl@
r266336:
Allow us to compile the Ti iic driver for both OMAP4 and AM335x.
r270230:
Rewrite of ti_i2c based on gonzo's patch, fix the following bugs/problems:
. interrupt storm detected on "intr70:"; throttling interrupt source;
. Added access serialization on iicbus_transfer(), previously there was
no such protection and a new transfer could easily confuse the
controller;
. Add error checkings (i.e. stop the transfer when a error is detected
and do _not_ overwrite the previous error);
. On command done interrupt do not assume that the transfer was finished
sucessfully as we will receive the command done interrupt even after
errors;
. Simplify the FIFO handling;
. Reset the FIFO between the transfers as the FIFO may contain data from
the last (failed) transfer;
. Fix the iicbus speed for AM335x, which in turn will make better use of
the I2C noise filter (set to one internal clock cycle);
. Move the read and write handler to ithread instead of notifying the
requesting thread with wakeup(9);
. Fix the comments based on OMAP4 TRM.
The above changes allows me to read the EDID from my HDMI monitor on BBB
with gonzo's patches to support TDA19988 (which does 128 bytes reads) and
repeatedly scan the iicbus (with a modified i2c(8)) without lock up the bus.
r273263:
Fix the chan address for mtx_sleep() on bus wait. Without this fix the
threads waiting for the bus would never wake.
Upgrade to 2014i
Lots of historical data
Pacific/Fiji will go into DST from 2014-11-02 to 2015-01-18
Pacific/Bougainville will go from UTC+10 to UTC+11.
Europe/Minsk will go from FET to MSK.
r270991, r271045:
Enhancements related to compiling FDT data...
- Use proper include path for dtc as well as cpp.
- Call cpp with -P to avoid printing line markings.
- Allow FDT_DTS_FILE to be a list, either in the makedtb target, or in a
kernel config file.
- Add the dts include directory to the -I list when doing arm builds.
- Invoke make_dtb with MACHINE defined for cross building friendliness.
- Allow the make_dtb script to work outside of a "make buildkernel"
context by setting MACHINE from uname -m if it's not set already.
- Use sh -c '...' to launch the dtb build scripts with env prepended,
otherwise it tries to treat the env var stuff as a script file name.
Delete old arm dts tree. This was created by cherry picking from a
full vendor tree. This worked great until it was time to update, but
now it is time to update. Hit the rest button by removing this branch
and re-adding it by a full copy of whatever is in the vendor tree.
Fix a few issues with creating VOLUME_LABEL for the
installation ISOs:
- TYPE, BRANCH, and REVISION are only defined if
OSRELEASE is not defined, so in situations where
one might set OSRELEASE for an in-house ISO build,
VOLUME_LABEL would be empty.
- makefs(8) limits the volume label to 32 characters,
which for the powerpc64 case, OSRELEASE expands to
FreeBSD-11.0-CURRENT-powerpc-powerpc64. Even with
removing the prefixing 'FreeBSD-', the string is 30
characters long, leaving zero room for suffixing the
type of ISO media (BO for bootonly, CD for cdrom, and
DVD for dvdrom).
Resolve these by defining VOLUME_LABEL when defining
OSRELEASE if unset. If OSRELEASE is defined by the
builder, use the OSRELEASE from that definition as the
VOLUME_LABEL.
In addition, for cases where both TARGET and TARGET_ARCH
are used for the VOLUME_LABEL, use TARGET_ARCH if it
differs from TARGET.
There are probably a few sharp edges here yet, but these
problems are going to affect the powerpc/powerpc64 builds
for 10.1-RELEASE, so the immediate concern is fixing the
underlying problem at hand quickly, and less so about the
elegance of the fix.
Insta-MFC ok: re (kib)
Sponsored by: The FreeBSD Foundation
Attach the imx6 CCM driver during BUS_PASS_CPU.
Unconditionally enable the clocks for all imx6 devices that we have drivers
for, or that are required to run the chip (such as busses).
The U-Boot README says fdt_addr_r is the right env var for fdt data
loaded into ram, but vendors also use fdtaddr and fdt_addr. Check the
recommended variable first and fall back to the others.
