Before my refactoring the code reported value as maximum number of sectors,
adding one to the maximum sector number returned by respective command.
While this difference is somewhat confusing, restore previous behavior.
MFC after: 3 days
Clarify the deprecation notice in amd.8. amd will be removed from the
FreeBSD base system before FreeBSD 13.0.
Reviewed by: rgrimes, trasz, kevans, brooks (all earlier, in D22466)
Discussed with: cy
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
r354991 removed variable-sized object initializing on defining. For the safe
reason, manually initialize the members to 0.
Sponsored by: The FreeBSD Foundation
SPE registers are already exported in core dumps with the VMX note, so use
the same interface for live access.
Instead of simply guarding out in #ifndef __SPE__ the cpu_feature check, I
chose to keep the check and check against PPC_FEATURE_SPE, on the off-chance
someone decides to run a SPE kernel on a non-SPE device (which is possible,
though highly unlikely, and would be no different from running a MPC85XX
kernel in that instance).
The pNFS server currently reports SpaceUsed (va_bytes) for the metadata
file. This in not correct, since the metadata file is always empty and,
as such, va_bytes is just the allocation for the empty file.
This patch adds va_bytes to the list of attributes acquired from the
DS for a file, so that it includes the allocated data size and is updated
when the file is written.
For files created on a pNFS server before this patch is applied, the
va_bytes value is estimated by rounding va_size up to a multiple of
BLKDEV_IOSIZE. Once the file is written after this patch has been
applied to the metadata server, the va_bytes returned for the file
will be correct.
This patch only affects a pNFS metadata server.
Found during testing of the NFSv4.2 pNFS server for the Allocate operation.
(Not yet in head/current.)
MFC after: 2 weeks
[mips] Set macros for Octeon+ CPU
This is one of the upstream changes needed for adding support for the
OCTEON+ CPU type, so that we can test Clang builds using the most
commonly available FreeBSD/mips64 reference platform, the Edge Router
Lite.
Requested by: kevans
MFC after: 1 month
X-MFC-With: r353358
[mips] Set __OCTEON__ macros
This is one of the upstream changes needed for adding support for the
OCTEON+ CPU type, so that we can test Clang builds using the most
commonly available FreeBSD/mips64 reference platform, the Edge Router
Lite.
Requested by: kevans
MFC after: 1 month
X-MFC-With: r353358
[mips] Fix `__mips_isa_rev` macros value for Octeon CPU
This is one of the upstream changes needed for adding support for the
OCTEON+ CPU type, so that we can test Clang builds using the most
commonly available FreeBSD/mips64 reference platform, the Edge Router
Lite.
Requested by: kevans
MFC after: 1 month
X-MFC-With: r353358
[mips] Add `octeon+` to the list of CPUs accepted by the driver
This is one of the upstream changes needed for adding support for the
OCTEON+ CPU type, so that we can test Clang builds using the most
commonly available FreeBSD/mips64 reference platform, the Edge Router
Lite.
Requested by: kevans
MFC after: 1 month
X-MFC-With: r353358
[mips] Write `AFL_EXT_OCTEONP` flag to the `.MIPS.abiflags` section
Differential Revision: https://reviews.llvm.org/D69851
This is one of the upstream changes needed for adding support for the
OCTEON+ CPU type, so that we can test Clang builds using the most
commonly available FreeBSD/mips64 reference platform, the Edge Router
Lite.
Requested by: kevans
MFC after: 1 month
X-MFC-With: r353358
[mips] Support `octeon+` CPU in the `.set arch=` directive
Differential Revision: https://reviews.llvm.org/D69850
This is one of the upstream changes needed for adding support for the
OCTEON+ CPU type, so that we can test Clang builds using the most
commonly available FreeBSD/mips64 reference platform, the Edge Router
Lite.
Requested by: kevans
MFC after: 1 month
X-MFC-With: r353358
[mips] Implement Octeon+ `saa` and `saad` instructions
`saa` and `saad` are 32-bit and 64-bit store atomic add instructions.
memory[base] = memory[base] + rt
These instructions are available for "Octeon+" CPU. The patch adds
support for both instructions to MIPS assembler and diassembler and
introduces new CPU type - "octeon+".
Next patches will implement `.set arch=octeon+` directive and
`AFL_EXT_OCTEONP` ISA extension flag support.
Differential Revision: https://reviews.llvm.org/D69849
This is one of the upstream changes needed for adding support for the
OCTEON+ CPU type, so that we can test Clang builds using the most
commonly available FreeBSD/mips64 reference platform, the Edge Router
Lite.
Requested by: kevans
MFC after: 1 month
X-MFC-With: r353358
Add bit_ffs_area_at and bit_ffc_area_at functions for searching a bit
string for a sequence of contiguous set or unset bits of at least the
specified size.
The bit_ffc_area function will be used by the Intel ice driver for
implementing resource assignment logic using a bitstring to represent
whether or not a given index has been assigned or is currently free.
The bit_ffs_area, bit_ffc_area_at and bit_ffs_area_at functions are
implemented for completeness.
I'd like to add further test cases for the new functions, but I'm not
really sure how to add them easily. The new functions depend on specific
sequences of bits being set, while the bitstring tests appear to run for
varying bit sizes.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: asomers@, erj@
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D22400
bit_ffs_at and bit_ffc_at both take _start parameters which indicate to
start searching from _start onwards.
If the given _start index is past the size of the bit string, these
functions will calculate an address of the current bitstring which is
after the expected size. The function will also dereference the memory,
resulting in a read buffer overflow.
The output of the function remains correct, because the tests ensure to
stop the loop if the current bitstring chunk passes the stop bitstring
chunk, and because of a check to ensure the reported _value is never
past _nbits.
However, if <sys/bitstring.h> is ever used in code which is checked by
-fsanitize=undefined, or similar static analysis, it can produce
warnings about reading past the buffer size.
Because of the above mentioned checks, these buffer overflows do not
occur as long as _start is less than _nbits. Additionally, by definition
bit_ffs_at and bif_ffc_at should set _result to -1 in any case where the
_start is after the _nbits.
Check for this case at the start of the function and exit early if so,
preventing the buffer read overflow, and reducing the amount of
computation that occurs.
Note that it may seem odd to ever have code that could call bit_ffc_at
or bit_ffs_at with a _start value greater than _nbits. However, consider
a for-loop that used bit_ffs and bit_ffs_at to loop over a bit string
and perform some operation on each bit that was set. If the last bit of
the bit string was set, the simplest loop implementation would call
bit_ffs_at with a start of _nbits, and expect that to return -1. While
it does infact perform correctly, this is what ultimately triggers the
unexpected buffer read overflow.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: asomers@, erj@
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D22398
This adds support for ifnet (NIC) KTLS using Chelsio T6 adapters.
Unlike the TOE-based KTLS in r353328, NIC TLS works with non-TOE
connections.
NIC KTLS on T6 is not able to use the normal TSO (LSO) path to segment
the encrypted TLS frames output by the crypto engine. Instead, the
TOE is placed into a special setup to permit "dummy" connections to be
associated with regular sockets using KTLS. This permits using the
TOE to segment the encrypted TLS records. However, this approach does
have some limitations:
1) Regular TOE sockets cannot be used when the TOE is in this special
mode. One can use either TOE and TOE-based KTLS or NIC KTLS, but
not both at the same time.
2) In NIC KTLS mode, the TOE is only able to accept a per-connection
timestamp offset that varies in the upper 4 bits. Put another way,
only connections whose timestamp offset has the 28 lower bits
cleared can use NIC KTLS and generate correct timestamps. The
driver will refuse to enable NIC KTLS on connections with a
timestamp offset with any of the lower 28 bits set. To use NIC
KTLS, users can either disable TCP timestamps by setting the
net.inet.tcp.rfc1323 sysctl to 0, or apply a local patch to the
tcp_new_ts_offset() function to clear the lower 28 bits of the
generated offset.
3) Because the TCP segmentation relies on fields mirrored in a TCB in
the TOE, not all fields in a TCP packet can be sent in the TCP
segments generated from a TLS record. Specifically, for packets
containing TCP options other than timestamps, the driver will
inject an "empty" TCP packet holding the requested options (e.g. a
SACK scoreboard) along with the segments from the TLS record.
These empty TCP packets are counted by the
dev.cc.N.txq.M.kern_tls_options sysctls.
Unlike TOE TLS which is able to buffer encrypted TLS records in
on-card memory to handle retransmits, NIC KTLS must re-encrypt TLS
records for retransmit requests as well as non-retransmit requests
that do not include the start of a TLS record but do include the
trailer. The T6 NIC KTLS code tries to optimize some of the cases for
requests to transmit partial TLS records. In particular it attempts
to minimize sending "waste" bytes that have to be given as input to
the crypto engine but are not needed on the wire to satisfy mbufs sent
from the TCP stack down to the driver.
TCP packets for TLS requests are broken down into the following
classes (with associated counters):
- Mbufs that send an entire TLS record in full do not have any waste
bytes (dev.cc.N.txq.M.kern_tls_full).
- Mbufs that send a short TLS record that ends before the end of the
trailer (dev.cc.N.txq.M.kern_tls_short). For sockets using AES-CBC,
the encryption must always start at the beginning, so if the mbuf
starts at an offset into the TLS record, the offset bytes will be
"waste" bytes. For sockets using AES-GCM, the encryption can start
at the 16 byte block before the starting offset capping the waste at
15 bytes.
- Mbufs that send a partial TLS record that has a non-zero starting
offset but ends at the end of the trailer
(dev.cc.N.txq.M.kern_tls_partial). In order to compute the
authentication hash stored in the trailer, the entire TLS record
must be sent as input to the crypto engine, so the bytes before the
offset are always "waste" bytes.
In addition, other per-txq sysctls are provided:
- dev.cc.N.txq.M.kern_tls_cbc: Count of sockets sent via this txq
using AES-CBC.
- dev.cc.N.txq.M.kern_tls_gcm: Count of sockets sent via this txq
using AES-GCM.
- dev.cc.N.txq.M.kern_tls_fin: Count of empty FIN-only packets sent to
compensate for the TOE engine not being able to set FIN on the last
segment of a TLS record if the TLS record mbuf had FIN set.
- dev.cc.N.txq.M.kern_tls_records: Count of TLS records sent via this
txq including full, short, and partial records.
- dev.cc.N.txq.M.kern_tls_octets: Count of non-waste bytes (TLS header
and payload) sent for TLS record requests.
- dev.cc.N.txq.M.kern_tls_waste: Count of waste bytes sent for TLS
record requests.
To enable NIC KTLS with T6, set the following tunables prior to
loading the cxgbe(4) driver:
hw.cxgbe.config_file=kern_tls
hw.cxgbe.kern_tls=1
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D21962
than effectively doing scatter/gather IO with a pair of iic_msgs that direct
the controller to do a single transfer with no bus STOP/START between the
two buffers. It turns out we have multiple i2c hardware drivers that don't
honor the NOSTOP and NOSTART flags; sometimes they just try to do the
transfers anyway, creating confusing failures or leading to corrupted data.
This Makefile sets KERN_OPTS. This permits kernel module Makefiles to
use KERN_OPTS to control the value of variables such as SRCS that are
used by bsd.kmod.mk for KERN_OPTS values that honor WITH/WITHOUT
options for standalone builds.
Add the manual page for sio(4) to ObsoleteFiles.inc, so that make delete-all
will remove it. The manual page was removed together with sio(4) in
r354929.
Approved by: emaste
Differential Revision: https://reviews.freebsd.org/D22477
We'll write the value we read back to ack pending interrupts, but we should
at least make it clear to ourselves that we only want to ack pending
transfer interrupts.
This reapplies the RISC-V GNU ld workaround from r354896, r354899, and
354900, along with a fix for the build failure during cleandir.
LINKER_TYPE was not being set during cleandir, resulting in
Malformed conditional (${LINKER_TYPE} == "bfd" && ${MACHINE} == "riscv")
from Cirrus-CI.
PR: 242109
Sponsored by: The FreeBSD Foundation
illumos/illumos-gate@555d674d5d555d674d5dhttps://www.illumos.org/issues/10592
This is a collection of recent fixes from ZoL:
8eef997679b Error path in metaslab_load_impl() forgets to drop ms_sync_lock
928e8ad47d3 Introduce auxiliary metaslab histograms
425d3237ee8 Get rid of space_map_update() for ms_synced_length
6c926f426a2 Simplify log vdev removal code
21e7cf5da89 zdb -L should skip leak detection altogether
df72b8bebe0 Rename range_tree_verify to range_tree_verify_not_present
75058f33034 Remove unused vdev_t fields
Portions contributed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Author: Serapheim Dimitropoulos <serapheim@delphix.com>
MFC after: 4 weeks
Arm64 doesn't define the bus_space_set_multi_stream and
bus_space_set_region_stream functions. Don't try to define them there.
Sponsored by: DARPA, AFRL
Update the NetBSD Kernel Concurrency Sanitizer (KCSAN) runtime to work in
the FreeBSD kernel. It is a useful tool for finding data races between
threads executing on different CPUs.
This can be enabled by enabling KCSAN in the kernel config, or by using the
GENERIC-KCSAN amd64 kernel. It works on amd64 and arm64, however the later
needs a compiler change to allow -fsanitize=thread that KCSAN uses.
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22315
illumos/illumos-gate@663207adb1663207adb1
10601 Pool allocation classes
https://www.illumos.org/issues/10601
illumos port of ZoL Pool allocation classes. Includes at least these two
commits:
441709695 Pool allocation classes misplacing small file blocks
cc99f275a Pool allocation classes
10757 Add -gLp to zpool subcommands for alt vdev names
https://www.illumos.org/issues/10757
Port from ZoL of
d2f3e292d Add -gLp to zpool subcommands for alt vdev names
Note that a subsequent ZoL commit changed -p to -P
a77f29f93 Change full path subcommand flag from -p to -P
Portions contributed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Portions contributed by: Håkan Johansson <f96hajo@chalmers.se>
Portions contributed by: Richard Yao <ryao@gentoo.org>
Portions contributed by: Chunwei Chen <david.chen@nutanix.com>
Portions contributed by: loli10K <ezomori.nozomu@gmail.com>
Author: Don Brady <don.brady@delphix.com>
11541 allocation_classes feature must be enabled to add log device
illumos/illumos-gate@c1064fd7cec1064fd7cehttps://www.illumos.org/issues/11541
After the allocation_classes feature was integrated, one can no longer add a
log device to a pool unless that feature is enabled. There is an explicit check
for this, but it is unnecessary in the case of log devices, so we should handle
this better instead of forcing the feature to be enabled.
Author: Jerry Jelinek <jerry.jelinek@joyent.com>
FreeBSD notes.
I faithfully added the new -g, -L, -P flags, but only -g does something:
vdev GUIDs are displayed instead of device names. -L, resolve symlinks,
and -P, display full disk paths, do nothing at the moment.
The use of special vdevs is backward compatible for read-only access, so
root pools should be bootable, but exercise caution.
MFC after: 4 weeks
r354290 removed arm.arm from universe, but arm.arm kernels were still
found and built during the kernel stage. I'm not aware of a better way
to address this at the moment, but since there aren't many arm.arm
kernels anyhow just add an explicit NO_UNIVERSE to them.
Reported by: rpokala
Later parts assume that this would've been done if interrupts are enabled,
but this is the only case in which that wouldn't have been true. This commit
also reorders operations such that we're done touching slot/slot->intmask
before we call back into the SDHCI framework and exit.
r354823 kicked DATA_END handling out of the DMA interrupt path "to make
things easy", but this was likely a mistake -- if we know we're done after
we've finished pending DMA operations, we should go ahead and acknowledge
it rather than waiting for the controller to finalize it. If it's not ready,
we'll simply re-enable interrupts and wait for it anyways, to be re-entered
in sdhci_data_intr.
Later parts assume that this would've been done if interrupts are enabled,
but this is the only case in which that wouldn't have been true. This commit
also reorders operations such that we're done touching slot/slot->intmask
before we call back into the SDHCI framework and exit.
