variables. These are intended to allow bypassing the
'svn co /usr/{src,doc,ports}' step in the chroot when the
tree exists from external means.
The use case here is that /usr/src, /usr/doc, and /usr/ports
in the chroot exist as result of zfs dataset clones, so it
is possible (and happens quite often) that the included
distributions may not be consistent. (This is not the case
for -RELEASE builds, but does happen for snapshot builds.)
Tested on: stable/9@r264319
MFC After: 3 days
Sponsored by: The FreeBSD Foundation
This code was heavily broken few months ago during CAM locking changes.
Fixing it would require almost complete rewrite. Since there are no
known devices on market using this interface younger then ~15 years, and
they are CD, not even DVD, I don't see much reason to rewrite it.
This change does not mean those devices won't work. They will just work
slower due to inefficient disks load/unload schedule if several LUNs
accessed same time.
Discussed with: ken@
Silence on: scsi@, hardware@
MFC after: 1 week
other modes supported by the FTDI serial adapter chips.
In addition to adding the new ioctls, this change removes all the code
that reset the chip at attach and open/close time, and also the code
that turned on RTS/CTS flow control on open without any permission to do
so (that was just always a bug in the driver).
When FTDI chips are configured as GPIO or MPSSE or other special-purpose
uses by an attached serial eeprom, the chip will power on with certain
pins driven or floating, and it's important that the driver not do
anything to the chip to perturb that unless it receives a specific
command to do so. When used for "plain old serial comms" the chip
powers on into the right mode and never needs to be reset while it's
running to operate properly, so this change is transparent to most users.
when WITH_COMPRESSED_IMAGES is used.
Requested by: delphij, brooks, Nikolai Lifanov
MFC After: 1 week
X-MFC-With: r264027,r264028,r264029,r264030
Sponsored by: The FreeBSD Foundation
When set to a non-empty value, the installation medium is
compressed with gzip(1) as part of the 'install' target in
the release/ directory.
With gzip(1) compression, downloadable image are reduced in
size quite significantly. Build test against head@263927
shows the following:
bootonly.iso: 64% smaller
disc1.iso: 44% smaller
memstick.img: 47% smaller
mini-memstick.img: 65% smaller
dvd1.iso: untested
This option is off by default, I would eventually like to
turn it on by default, and remove the '-k' flag to gzip(1)
so only compressed images are published on FTP.
Requested by: wkoszek
MFC After: 1 week
Sponsored by: The FreeBSD Foundation
being defined. The system works fine without it (because GNUCXX isn't
built when WITHOUT_CXX is defined), and it is one of the few places we
test WITHOUT_FOO instead of MK_FOO in the base system. Simply
eliminate it to solve both problems. Also, minor tweak to make it
clearer that the default is always NO for GNUGCC on i386.
introduced, the meaning of WITH_FDT changed from 'do FDT in boot
loader and build dtc compiler' to be simply 'do FDT things in the boot
loader'. Now that we test for FDT in the architecture specific files,
this test here is now redunant and encourages bad behavior, so just
eliminate it and make it always yes. Those architectures whose boot
loaders don't support FDT already omit it when it is set to yes
anyway.
guess wrong for buildkernel when CC=gcc49, say. Eliminate all the
guessing. COMPILER_TYPE propigates properly on its own, if specified,
and we guess it correctly otherwise lower in the build. Also, fix
conditionals for armv6hf when using an external compiler chain. They
were broken before, but unused. Also, prefer checking the compiler
type over CLANG_IS_CC since the latter is only supposed to be used to
determine what symlinks to install (more fixes to follow).
when both WITH_FOO and WITHOUT_FOO are set. Use this where
possible. Only disallow setting of MK_FOO on the command line. This
was preferable to inventing a new mechanism or fixing the undef bug
(bin/183762) which precludes users from turning off anything we turn
off for parts of the build with WITHOUT_FOO prior to this.
all the SUBDIR entries in parallel, instead of serially. Apply this
option to a selected number of Makefiles, which can greatly speed up the
build on multi-core machines, when using make -j.
This can be extended to more Makefiles later on, whenever they are
verified to work correctly with parallel building.
I tested this on a 24-core machine, with make -j48 buildworld (N = 6):
before stddev after stddev
======= ====== ======= ======
real time 1741.1 16.5 959.8 2.7
user time 12468.7 16.4 14393.0 16.8
sys time 1825.0 54.8 2110.6 22.8
(user+sys)/real 8.2 17.1
E.g. the build was approximately 45% faster in real time. On machines
with less cores, or with lower -j settings, the speedup will not be as
impressive. But at least you can now almost max out a machine with
buildworld!
Submitted by: jilles
MFC after: 2 weeks
The ADC has a 12bit resolution and its raw output can be read via sysctl(8)
interface.
The driver allows the setup of ADC clock, samples average and open delay
(the number of clock cycles to wait before start the conversion).
The TSC_ADC module is set in the general purpose mode (no touchscreen
support).
Tested on Beaglebone-black.
Written based on AM335x TRM.
Reviewed by: rpaulo
Approved by: adrian (mentor)
Tested by: me, Brian J. McGovern, Sulev-Madis Silber (ketas)
This targets the existing ARMv6 and ARMv7 SoCs that contain a VFP unit.
This is an optional coprocessors may not be present in all devices, however
it appears to be in all current SoCs we support.
armv6hf targets the VFP variant of the ARM EABI and our copy of gcc is too
old to support this. Because of this there are a number of WITH/WITHOUT
options that are unsupported and must be left as the default value. The
options and their required value are:
* WITH_ARM_EABI
* WITHOUT_GCC
* WITHOUT_GNUCXX
In addition, without an external toolchain, the following need to be left
as their default:
* WITH_CLANG
* WITH_CLANG_IS_CC
As there is a different method of passing float and double values to
functions the ABI is incompatible with existing armv6 binaries. To use
this a full rebuild of world is required. Because no floating point values
are passed into the kernel an armv6 kernel with VFP enabled will work with
an armv6hf userland and vice versa.
To reduce the diff struct pcu.cnt field was not renamed, so
PCPU_OP(cnt.field) is still used. pc_cnt and pcpu are also used in
kvm(3) and vmstat(8). The goal was to not affect externally used KPI.
Bump __FreeBSD_version_ in case some out-of-tree module/code relies on the
the global cnt variable.
Exp-run revealed no ports using it directly.
No objection from: arch@
Sponsored by: EMC / Isilon Storage Division
Added a section on test suite configuration, and cleaned up up
grammar errors and awkward prose. The config variables were
discussed on freebsd-testing.
Discussed with: Garrett Cooper, jmmv
MFC after: 2 weeks
Sponsored by: Spectra Logic Corporation
is useful primarily on a system used for cross-building, when you have a
set of flags to apply to the TARGET_ARCH being cross-built but don't want
those settings applied to building the cross-tools or other components that
run on the build host machine.
The NetBSD Foundation states "Third parties are encouraged to change the
license on any files which have a 4-clause license contributed to the
NetBSD Foundation to a 2-clause license."
This change removes clauses 3 and 4 from copyright / license blocks that
list The NetBSD Foundation as the only copyright holder.
Sponsored by: The FreeBSD Foundation
Fix logic error in the description of counter_u64_alloc: the command
may fail only if M_NOWAIT is specified, not M_WAITOK.
Reviewed by: glebius
MFC after: 2 weeks
Sponsored by: Spectra Logic Corporation
As a prerequisite for multiple queues, the guest must have MSIX enabled.
Unfortunately, to work around device passthrough bugs, FreeBSD disables
MSIX when running as a VMWare guest due to the hw.pci.honor_msi_blacklist
tunable; this tunable must be disabled for multiple queues.
Also included is various minor changes from the projects/vmxnet branch.
MFC after: 1 month
The atf cp_test.sh sample file should have never been marked executable in
the first place because this file needs to be "built" first before being
usable.
The new suite.test.mk file contains all the logic needed to install test
programs under /usr/tests/ and to support Kyua as the run-time engine.
This file is included by default by bsd.test.mk so Makefiles do not need
to care about its existence.
Specific Makefiles can define NOT_FOR_TEST_SUITE to indicate that whatever
test programs they are building are not supposed to be installed under
/usr/tests/ nor run by Kyua. (The effect of passing this setting is that
suite.test.mk is simply not included.)
NOT_FOR_TEST_SUITE should never be used by Makefiles in the base system.
This functionality is provided so that third-parties can hook in their
own test code, with different semantics, if they wish. This was asked
for by sjg@.
Change {atf,plain,tap}.test.mk to be internal implementation details of
bsd.test.mk. Makefiles that build tests should now only include bsd.test.mk
and declaratively specify what they want to build, without worrying about
the internal implementation of the mk files.
The reason for this change is to permit building test programs of different
interfaces from a single directory, which is something I had a need for
while porting tests over from src/tools/regression/.
Additionally, this change makes it possible to perform some other requested
changes to bsd.test.mk in an easier manner. Coming soon.
AppleTalk was a network transport protocol for Apple Macintosh devices
in 80s and then 90s. Starting with Mac OS X in 2000 the AppleTalk was
a legacy protocol and primary networking protocol is TCP/IP. The last
Mac OS X release to support AppleTalk happened in 2009. The same year
routing equipment vendors (namely Cisco) end their support.
Thus, AppleTalk won't be supported in FreeBSD 11.0-RELEASE.
IPX was a network transport protocol in Novell's NetWare network operating
system from late 80s and then 90s. The NetWare itself switched to TCP/IP
as default transport in 1998. Later, in this century the Novell Open
Enterprise Server became successor of Novell NetWare. The last release
that claimed to still support IPX was OES 2 in 2007. Routing equipment
vendors (e.g. Cisco) discontinued support for IPX in 2011.
Thus, IPX won't be supported in FreeBSD 11.0-RELEASE.
for FreeBSD standards. Very little, if any, content was
modified.
These are not yet linked to the build.
Submitted by: Abhishek Gupta (abgupta!microsoft dot com)
Sponsored by: The FreeBSD Foundation
After several months of testing and fixing (and breaking)
various parts of release/release.sh changes, it is now
possible to build FreeBSD/arm images as part of the release
process.
When EMBEDDEDBUILD is set in the release.conf file, release.sh
will create the build environment, then run a separate script
in release/${XDEV}/release.sh [1]. Currently, only arm is
supported.
The release/${XDEV}/release.sh configures the build environment
specific for the target image, such as installing gcc(1),
installing additional third-party software from the ports tree,
and fetching external sources.
Once the build environment is set up, release/${XDEV}/release.sh
runs Crochet, written by Tim Kientzle, which builds the userland
and kernel, and creates an image that can be written to an SD
card with dd(1). Many thanks to Tim for his work on Crochet.
Sample configurations for FreeBSD/arm boards are in the
release/arm/ directory, and Crochet configuration files for each
board are located in release/tools/arm/. Supported boards at this
time are: BEAGLEBONE, PANDABOARD, RPI-B, and WANDBOARD-QUAD.
Adding support for additional boards will continue in the
projects/release-embedded/ branch, and incrementally merged back
to head/.
Many thanks to the FreeBSD Foundation for the support and
sponsorship of this project.
[1] XDEV is used in order to keep the various configurations
organized by architecture, but since TARGET and TARGET_ARCH
are used to build the chroot, the values of those variables
cannot be used.
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
- Use counter(9) for rt_pksent (former rt_rmx.rmx_pksent). This
removes another cache trashing ++ from packet forwarding path.
- Create zini/fini methods for the rtentry UMA zone. Via initialize
mutex and counter in them.
- Fix reporting of rmx_pksent to routing socket.
- Fix netstat(1) to report "Use" both in kvm(3) and sysctl(3) mode.
The change is mostly targeted for stable/10 merge. For head,
rt_pksent is expected to just disappear.
Discussed with: melifaro
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
(1) Invoke cpp to bring in files via #include (although the old
/include/ stuff is supported still).
(2) bring in files from either vendor tree or freebsd-custom files
when building.
(3) move all dts* files from sys/boot/fdt/dts to
sys/boot/fdt/dts/${MACHINE} as appropriate.
(4) encode all the magic to do the build in sys/tools/fdt/make_dtb.sh
so that the different places in the tree use the exact same logic.
(5) switch back to gpl dtc by default. the bsdl one in the tree has
significant issues not easily addressed by those unfamiliar with
the code.
- Add a VCSCMD variable that defaults to 'svn checkout',
and update places 'svn co' is used directly.
- After sourcing a configuration file, prefix SRCBRANCH,
PORTBRANCH, and DOCBRANCH with the SVNROOT.
- Properly capitalize 'FreeBSD.org' in the default SVNROOT.
- Update Copyright.
release.conf.sample:
- Add an example to use git instead of svn, by nullifying
SVNROOT, and setting SRCBRANCH, DOCBRANCH, and PORTBRANCH
to the URL fo a git repository.
release.7:
- Document VCSCMD.
Submitted by: Rick Miller (based on)
Sponsored by: The FreeBSD Foundation
- Support for double-tap and drag.
- Support for 2-finger horizontal scrolling which translates to page-back/forward events.
- Single finger tap is equivalent to a left-button press.
- Two-finger taps are mapped to the right-button click.
- Three fingers are mapped to middle button.
- Add sysctl to disable single finger tapping.
- Fix for multiple open of /dev/atp0
- Enhanced support for the Fountain/Geyser family by adding Geyser4.
- Update manual page.
Submitted by: Rohit Grover <rgrover1@gmail.com>
MFC after: 2 weeks
UCL is heavily infused by nginx configuration as the example of a convenient
configuration system. However, UCL is fully compatible with JSON format and is
able to parse json files.
UCL is used by pkg(8) for its configuration file as well for the manifest format
in packages, it will be used in base for the pkg boostrap (signature checking
and configuration file parsing.)
libucl has been developped and is maintained by vsevolod@
bsd.sys.mk, where it really belongs. This also causes the flag to get
added when clang is *not* the default system compiler, but is still
used, e.g. by setting WITH_CLANG_IS_CC manually.
MFC after: 3 days
directives, since on sparc64 we must still GNU as, which does not
support those directives.
Note there are several programs and libraries in our tree, which are
always compiled with -g, even if DEBUG_FLAGS is not set by the user!
It is a small and lightweight Mail Transport Agent.
It accepts mails from locally installed Mail User Agents (MUA) and delivers the
mails either locally or to a remote destination. Remote delivery includes
several features like TLS/SSL support, SMTP authentication and NULLCLIENT.
Make dma conditional to new WITHOUT_DMA option and make it respect WITHOUT_MAIL
Reviewed by: peter
Discussed with: emaste, bz, peter
all of the features in the current working draft of the upcoming C++
standard, provisionally named C++1y.
The code generator's performance is greatly increased, and the loop
auto-vectorizer is now enabled at -Os and -O2 in addition to -O3. The
PowerPC backend has made several major improvements to code generation
quality and compile time, and the X86, SPARC, ARM32, Aarch64 and SystemZ
backends have all seen major feature work.
Release notes for llvm and clang can be found here:
<http://llvm.org/releases/3.4/docs/ReleaseNotes.html>
<http://llvm.org/releases/3.4/tools/clang/docs/ReleaseNotes.html>
MFC after: 1 month
gpioled(4).
Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for
the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx)
used as reference for a non OFW-based system.
Update the gpioled(4) and gpioiic(4) man pages with some details and
examples about the FDT/OFW support.
Some compatibility details pointed out by imp@ will follow in subsequent
commits.
Approved by: adrian (mentor, implicit)
