The version of the kernel has no bearing on what is in libc.
We now search for basename in libc to determin if we need to include
the libiberty version in the build.
This is all still a bit bogus as it will (like the sysctl method) cause
basename.o to be linked into the cross-build as well as the host build. It
would probably be better to test if we were doing the initial host build and
unconditionally include that. Once we've generated the target libc we know
that basename is available. (maybe test for $TOOLS_PREFIX or something).
Submitted by: peter
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.
Sorry john! (your next MFC will be a doosie!)
Reviewed by: peter@freebsd.org, dillon@freebsd.org
X-MFC after: ha ha ha ha
paths are chflaged 'schg' to prevent exploit vectors when run
by cron, by a root user, or by a user other then the one owning the
binary. This applies to most of the uucp binaries, cu, tip, and
man (man was already installed properly).
MFC will occur when approved.
value, it forces GCC to not optimize above this level. For intance, GCC
made with "WANT_FORCE_OPTIMIZATION_DOWNGRADE=1" is a good setting for the
Alpha platform when building ports.
This makes the following difference:
-groff_mdoc(7), -(7) - groff_mdoc reference for groff's mdoc implementation
+groff_mdoc(7) - reference for groff's mdoc implementation
empty line by troff(1) and is ignored. Teach makewhatis(1)
about this. This makes the following difference:
-groff_man(7), . groff_man(7) - groff `man' macros to support generation of man pages
+groff_man(7) - groff `man' macros to support generation of man pages
-groff_mdoc(7), -(7) - . groff_mdoc reference for groff's mdoc implementation
+groff_mdoc(7), -(7) - groff_mdoc reference for groff's mdoc implementation
-troff(1), . . troff(1) - format documents
+troff(1) - format documents
Noticed by: yar
Avoid using parenthesis enclosure macros (.Pq and .Po/.Pc) with plain text.
Not only this slows down the mdoc(7) processing significantly, but it also
has an undesired (in this case) effect of disabling hyphenation within the
entire enclosed block.
the components and trigger actions based on its position. This reduces
the need to remember the functions of various keys, and makes the
interface more consistant across library.
~
reading old a.out core files, which are totally 100% non-understandable
to the gdb floating-point reader if you have SSE turned on.
This should be the last of the world build breakers...
blessed way of doing this:
cc -o interp interp.c `perl -MExtUtils::Embed -e ccopts -e ldopts`
In order for this to work, ldopts should contain -lcrypt.
PR: 21804
Reviewed by: markm
it from the Synopsis field. There's no reason for the subject to be
different, since all that does is cause confusion. Users may get
confused because they may think the subject and synopsis are supposed
to be different, and developers may get confused because it may look
like there are two different problems.
Requested by: ru
stick their username (which sendmail will make into an e-mail address)
inside '<>'. Sendmail will still DTRT with this, and it conveniently
puts the submitter's name and e-mail address on one line, just like it
should be after "Submitted by" in a commit message.
it is taken as a single escape (`\') character. This prevented \e
from being output correctly in -Tkoi8-r case.
Noticed by: Andrey Simonenko <simon@comsys.ntu-kpi.kiev.ua>
$ PERL_DL_NONLAZY=1 perl -MPOSIX -e ''
Can't load '/usr/libdata/perl/5.6.0/mach/auto/POSIX/POSIX.so' for module
POSIX: /usr/libdata/perl/5.6.0/mach/auto/POSIX/POSIX.so: Undefined
symbol "sv_setptrobj" at /usr/libdata/perl/5.6.0/XSLoader.pm line 73.
at /usr/libdata/perl/5.6.0/mach/POSIX.pm line 24
Compilation failed in require.
BEGIN failed--compilation aborted.
This problem only exists in -CURRENT. Most often it is reproduced when
compiling some perl extension manually. Make test uses PERL_DL_NONLAZY,
and if a tested module uses POSIX, boom!
Luckily, we don't see it very often, mostly because the vast majority of
p5 ports do not perform the `make test' step.
Submitted by: Anton Berezin <tobez@tobez.org>
Needs to be a committer already: Anton Berezin <tobez@tobez.org>
end of the include searching. We really need a real fix for the issue of
which set of headers to use in compiling the cross-tools -- /usr/include,
or /usr/src/include.
produced by miniperl during buildworld phase.
- While at it, do loading of SelfLoader only when it is needed, and in
place where it is needed.
Submitted by: tobez@tobez.org (who is doing way too much good work
and is in need of the Commit Bit punishment)
for a module overridden by BSDPAN instead of the original module.
* Fix wrong manual section numbers in SEE ALSO.
* Add `Revision 42' to the beer-ware license. The BSDPAN author did not
originally get the reference and removed the revision from original
phk's version.
Submitted by: Anton Berezin <tobez@tobez.org>
in bsd.obj.mk rev.1.35, and
On Tue, Apr 24, 2001 at 06:29:27AM +1000, Bruce Evans wrote:
>
> This is bogus. It is normal for sloppy cleaning to cause problems.
> `make depend' after `make depend' should not do anything. I'm still
> waiting for a similar problem in kdump to be fixed properly :-).
possible to use old generated doc-* files as the source for new ones.
Wrong -mdoc files would then be installed, and man(1) failed with the
following diagnostics:
mdoc error: end-macro (.em) respecification is not allowed. (#41)
Should this have been `.Em ...'?
Put helper stuff into `beforedepend' to cleanup old files.
Makefile first infected in rev 1.15.
Reported via: -current
* Fix a bug which prevented the second invocation of overloaded
subs governed by SelfLoader from functioning.
* Fix a bug with XS modules. MakeMaker determines where the xsubpp
preprocessor is located by adding "ExtUtils" string to the Perl's
system path. At the same time, BSDPAN has to fool MakeMaker into
thinking that the Perl's system path is elsewhere. Now we
`reverse-adjust' the notion of the Perl's system path for a
moment, so xsubpp utility is found.
This should fix the breakage with some p5- ports.
Reported by: vanilla
Submitted by: Anton Berezin <tobez@tobez.org>
BSDPAN is the collection of modules that provides tighter than ever
integration of Perl into BSD Unix.
Currently, BSDPAN does the following:
o makes p5- FreeBSD ports PREFIX-clean;
o registers Perl modules in the FreeBSD package database with a
package name derived from the module name.
The name is of the form: bsdpan-ModuleName-V.VV.
Anyone interested in where BSDPAN is developing should read Anton's
message to the ports mailling list:
Message-ID: <20010105040828.A26011@heechee.tobez.org>
Submitted by: Anton Berezin <tobez@tobez.org>
I have held this back for over a year, as we will always have to wrestle
with the question of "*which* libiberty sources to use". Sigh, if only
the GNU people would treat it as a totally separate library from GCC, et al.
and release it as such...
"locailzed"; it should read "localized".
* The "test" operator can be a bit dangerous (e.g., if
a newbie writes a script named "test" and has it call
"apropos", which calls "test, ...).
* In its use as "whatis", apropos formats the first
line of the output differently than the following
lines. Specifically, it leaves out all but one of
the spaces that precede the dash in the first line.
Submitted by: Rich Morin <rdm@cfcl.com>
PR: 25126
of stuff (and thus length of error output) we put on the invocation command
line. Also follow the new FSF/GNU style of giving the symbol a value so it
can be used in `if()' statements in addition to `#if' so seldomly compiled
in code (on some platforms) gets compiled always, to help reduce bit-rot.
: As some manual pages are intended only for specific architectures,
: man searches any subdirectories, with the same name as the current
: architecture, in every directory which it searches. Machine specific
: areas are checked before general areas. The current machine type may
: be overridden by setting the environment variable MACHINE to the name
: of a specific architecture.
current_file_name and current_link_name sometimes point into the
middle of malloc()ed memory and sometimes point to alloca()ed memory,
but free() is sometimes called on them. This seems to be harmless
for the usual tar operations, but it is usually fatal for `tar -W'.
E.g., for `cd /etc; tar Wcf /tmp/foo rc', at the start of
verify_volume(), current_file_name points to alloca()ed memory, and
tar attempts to free it.
