Test LD_LIBRARY_PATH_FDS by linking a binary that requires a shared
library that isn't in any of the usual search paths. Ensure this fails
when we don't supply LD_LIBRARY_PATH_FDS or we pass invalid information
in it. Ensure it works when we pass the correct directory in various
places in the variable.
Approved by: rwatson (mentor)
MFC after: 3 weeks
Sponsored by: DARPA/AFRL
Force all the contents of /usr/tests to go into a separate distribution
file so that users of binary releases can easily choose to not install it.
To make this possible, we need two fixes:
- bsd.subdir.mk needs to properly honor NO_SUBDIR in all cases so that we
do not recurse into 'tests' subdirectories when we needn't. Otherwise,
we end up with some Kyuafiles in base.txz.
- etc/Makefile needs to skip installing tests in its 'distribute' target
so that a Kyuafile doesn't leak into base.txz.
Approved by: gjb
The change to expand_number (r204654) broke detection of too large sizes and
relative sizes ('+'/'-').
Also add some tests.
PR: 190735
Submitted by: Kirk Russell
MFC after: 1 week
In r266650, we made libatf-c and libatf-c++ private libraries so that no
components outside of the source tree could unintendedly depend on them.
This change does the same for the "atf-sh library" by moving the atf-sh
interpreter from its public location in /usr/bin/ to the private location
in /usr/libexec/. Our build system will ensure that our own test programs
use the right binary, but users won't be able to depend on atf-sh by
"mistake".
Committing this now to ride the UPDATING notice added with r267172 today.
the system.
Together with lm75(4) this module allows easy temperature monitoring over
SNMP, specially for embedded systems.
Manual page reviewed by: brueffer (D128)
prevents surprising effects post-installation on serial-only x86 systems
(e.g. bhyve) where the kernel messages will appear, rc scripts will run,
and then there will be no login prompt and you will be locked out of the
system.
Thanks to Devin Teske and Peter Grehan for ideas and testing. With this
patch, it may also be possible to unify all or most of the machine-specific
ttys files.
We should not be leaking these interfaces to the outside world given
that it's much easier for third-party components to use the devel/atf
package from ports.
As a side-effect, we can also drop the ATF pkgconfig and aclocal files
from the base system. Nothing in the base system needs these, and it
was quite ugly to have to get them installed only so that a few ports
could build. The offending ports have been fixed to depend on
devel/atf explicitly.
Reviewed by: bapt
The CUSE library is a wrapper for the devfs kernel functionality which
is exposed through /dev/cuse . In order to function the CUSE kernel
code must either be enabled in the kernel configuration file or loaded
separately as a module. Currently none of the committed items are
connected to the default builds, except for installing the needed
header files. The CUSE code will be connected to the default world and
kernel builds in a follow-up commit.
The CUSE module was written by Hans Petter Selasky, somewhat inspired
by similar functionality found in FUSE. The CUSE library can be used
for many purposes. Currently CUSE is used when running Linux kernel
drivers in user-space, which need to create a character device node to
communicate with its applications. CUSE has full support for almost
all devfs functionality found in the kernel:
- kevents
- read
- write
- ioctl
- poll
- open
- close
- mmap
- private per file handle data
Requested by several people. Also see "multimedia/cuse4bsd-kmod" in
ports.
$alias used to hold alias number, but now it carries full variable name,
so messages were tuned to account for that.
Other fixes:
- eliminate unneeded double spaces;
- tell user where inet/inet6 keywords are expected to be.
Reviewed by: hrs
MFC after: 1 week
default for newsyslog(8).
The /usr/local/etc/newsyslog.conf.d will give packages an opportunity to
install a default configuration to handle their own log files.
MFC after: 2 weeks
Relnotes: yes
This first step is mostly to prevent the code from rotting even further
and to ensure these do not get wiped when fmake's code is removed from
the tree.
These tests are currently being skipped because they detect the underlying
make is not fmake and thus disable themselves -- and the reason is that
some of the tests fail, possibly due to legitimate bugs. Enabling them to
run against bmake will come separately.
Lastly, it would be ideal if these tests were fed upstream but they are
not ready for that yet. In the interim, just put them under usr.bin/bmake/
while we sort things out. The existence of a different unit-tests directory
within here makes me feel less guilty about this.
Change confirmed working with a clean amd64 build.
of C1.
This may not stay through 11.0-RELEASE, but at least having it
on by default in -HEAD will expose (more) issues with broken hardware.
Note: I have no plans or desire to MFC this to stable/10.
melifaro, we agreed that ifconfig's behavior was not a bug. The main
motivation for bin/187551 was to partially resolve kern/187549, but we
resolved kern/187549 in a different way instead.
ObsoleteFiles.inc
etc/mtree/BSD.tests.dist
sbin/ifconfig/tests/fibs_test.sh
sbin/ifconfig/tests/Makefile
sbin/ifconfig/Makefile
Remove /usr/tests/sbin/ifconfig
PR: bin/187551
MFC after: 3 days
Sponsored by: Spectra Logic
This change adds tests/ directories in the source tree to create various
subdirectories in /usr/tests/ and to install placeholder Kyuafiles for
them.
the relevant hierarchies are: cddl, etc, games, gnu and secure.
The reason for this is to simplify the addition of new test programs for
utilities or libraries under any of these directories. Doing so on a
case by case basis is unnecessary and is quite an obscure process.
stop timer. since watchdogd rc.d script is marked as 'shutdown'
it will exit (on shutdown) and stop timer. if system happens to
hung after watchdogd exited, manual reset is required. when one
operates in "lights-out" type of environments and without
readily available "remote hands" it could create a problem.
this provides ability to override "stop signal" for watchdogd.
default behavior is preserved, i.e. watchdogd will still be killed
via SIGTERM and timer will be stopped. in order to activate new
feature, one needs to put
watchdogd_sig_stop="KILL"
into /etc/rc.conf and also make sure watchdogd timeout is set
to long enough value allowing system to come back online before
timeout fires.
Obtained from: Netflix
MFC after: 1 week
This file is used by pkg(8) from ports as well. Someone may
choose to not install pkg(7) but still want to consume
official packages by building or installing pkg(8) manually.
Discussed with: bapt
MFC after: 1 day (Working on EN)
the first alias had to be _alias0 and processing stopped at the first non-
defined variable (preventing gaps). Allowing gaps gives the administrator
the ability to group aliases in an adhoc manner and also lifts the
requirement to renumber aliases simply to comment-out an existing one.
Aliases are processed in numerical ascending order.
Discussed on: -rc
MFC after: 1 week
These were originally deleted as "not important" but, actually we need them
in place if we want to be able to use autoconf on software that provides
atf-based tests. (That includes being able to rebuild autotest from scratch
on the Kyua cluster machines, as the automated setup does.)
Interestingly, the pkill tool lives in bin, not usr.bin. Haven't bothered
to check if this is because the tool moved or because the tests were
originally added in the wrong place.
Note that these tests are for fmake, not bmake, and thus they are not
installed nor run when bmake is selected (the default). Yes, I have
wasted a *ton* of time on moving tests for no real reason other than
ensuring they are not left behind.
But maybe, just maybe, it was not work in vain: the majority of these
tests also work with bmake and the few that don't may point at broken
stuff. For example, the tests for the "archive" feature do not work
with bmake, but bmake's manpage and source tree seem to imply that they
should. So... to be investigated later; need to poke sjg@.
I'm starting with the easy cases. The leftovers need to be looked at a
bit more closely.
Note that this change _does_ modify the code of the old tests. This is
required in order to allow the code to locate the data files in the
source directory instead of the current directory, because Kyua
automatically changes the latter to a temporary directory.
Also note that at least one test is known to be broken here. Actually,
the test is not really broken: it's marked as a TODO but unfortunately
Kyua's TAP parser currently does not understand that. Will have to be
fixed separately.
This change was originally going to only migrate the usr.sbin tests but, as
it turns out, the usr.sbin/sa/ tests require files from usr.bin/lastcomm/
so it's better to just also migrate the latter at the same time. The other
usr.bin tests will be moved separately.
To make these tests work within the test suite, some of them have required
changes to prevent modifying the source directory and instead just rely on
the current directory for file manipulation.
AppleTalk was a network transport protocol for Apple Macintosh devices
in 80s and then 90s. Starting with Mac OS X in 2000 the AppleTalk was
a legacy protocol and primary networking protocol is TCP/IP. The last
Mac OS X release to support AppleTalk happened in 2009. The same year
routing equipment vendors (namely Cisco) end their support.
Thus, AppleTalk won't be supported in FreeBSD 11.0-RELEASE.
IPX was a network transport protocol in Novell's NetWare network operating
system from late 80s and then 90s. The NetWare itself switched to TCP/IP
as default transport in 1998. Later, in this century the Novell Open
Enterprise Server became successor of Novell NetWare. The last release
that claimed to still support IPX was OES 2 in 2007. Routing equipment
vendors (e.g. Cisco) discontinued support for IPX in 2011.
Thus, IPX won't be supported in FreeBSD 11.0-RELEASE.
allows us to change the uart(4) driver to not hardcode specific line
settings for the serial console.
A terminal type of 3wire makes sure the console still works when no DCD
signal is present, which preserves behviour. When it is known that the
terminal server (or DCE in general) provides DCD, a terminal type/class
of std can be used. This has the effect of being logged out when one
disconnects from the console -- improving security overall.
Likewise, when uart(4) does not fixate the baudrate, one can change
the terminal type/class to set a specific baudrate. An operator can use
this to change the console speed mid-flight, without needing a reboot.
Of course it helps in this respect if and when the firmware can be
configured from the OS.
The above mentioned capabilities depend on uart(4) being changed, which
is to happen next.
the existing terminal types/classes that have the baudrate suffix,
but differ in that no baudrate is set/defined.
The purpose of these new types/classes is to allow them to be used
for the serial console. Currently the uart(4) driver fixates the
baudrate and the CLOCAL flag, which means that it doesn't matter
whether you give it std.<baud> or 3wire.<baud> as the terminal type
to getty and what exactly <baud> is set to. It's being overridden
by uart(4). The goal is to change uart(4) not to override these
settings.
