with a weak memory model or x86 + PAE (or more specifically, your
driver is using bounce pages) and you have had problems with em(4),
this may fix it. At least this is needed to have em(4) work properly
on FreeBSD/arm.
Original version by: cognet
Reviewed by: tackerman
Tested by: cognet
protocols: it is possible for sockets to be created and attached
to the divert protocol between the test for sockets present and
successful unload of the registration handler. We will need to
explore more mature APIs for unregistering the protocol and then
draining consumers, or an atomic test-and-unregister mechanism.
of protocols. The call to divert_packet() is done through a function pointer. All
semantics of IPDIVERT remain intact. If IPDIVERT is not loaded ipfw will refuse to
install divert rules and natd will complain about 'protocol not supported'. Once
it is loaded both will work and accept rules and open the divert socket. The module
can only be unloaded if no divert sockets are open. It does not close any divert
sockets when an unload is requested but will return EBUSY instead.
Add constants for SPI protocol delays that are needed for
target mode.
aic7xxx.c:
Correct a target mode issue that caused an occassional
spurious REQ to be seen on the bus when performing manual
message processing (e.g. transfer rate negotiation).
Enforce phase change bus settle rules with explicit
delays when performing manual message processing in
target mode. The sequencer already did this for
"fast-path", target mode message processing.
acquire Giant if the passed interface has IFF_NEEDSGIANT set on it.
Modify calls into (ifp)->if_ioctl() in if.c to use these macros in order
to ensure that Giant is held.
MFC after: 3 days
Bumped into by: jmg
when using character set conversions.
Also include POSIX <string.h> vs. BSD <strings.h> now that we've broken
traditional BSD behavior [and compatibility with our BSD brethren].
PR: 72445
Submitted by: Vladimir Nechitailo <nechit@lpi.ru>
Patch by: Stasys Smailys <ssmailys@komvista.lt>
protocols in inetsw[] and define initially eight spacer slots.
Remove conflicting declaration 'struct pr_usrreqs nousrreqs'. It is
now declared and initialized in kern/uipc_domain.c.
With pr_proto_register() it has become possible to dynamically load protocols
within the PF_INET domain. However the PF_INET domain has a second important
structure called ip_protox[] that is derived from the 'struct protosw inetsw[]'
and takes care of the de-multiplexing of the various protocols that ride on
top of IP packets.
The functions ipproto_[un]register() allow to dynamically adjust the ip_protox[]
array mux in a consistent and easy way. To register a protocol within
ip_protox[] the existence of a corresponding and matching protocol definition
in inetsw[] is required. The function does not allow to overwrite an already
registered protocol. The unregister function simply replaces the mux slot with
the default index pointer to IPPROTO_RAW as it was previously.
as the original logic did. This fixes a race with vr_intr() which was
masked on UP systems and manifested on SMP systems.
PR: kern/62889
MFC after: 1 day
families.
The protosw[] array of any particular protocol family ("domain") is of fixed size
defined at compile time. This made it impossible to dynamically add or remove any
protocols to or from it. We work around this by introducing so called SPACER's
which are embedded into the protosw[] array at compile time. The SPACER's have
a special protocol number (32767) to indicate the fact that they are SPACER's but
are otherwise NULL. Only as many protocols can be dynamically loaded as SPACER's
are provided in the protosw[] structure.
The pr_usrreqs structure is treated more special and contains pointers to dummy
functions only returning EOPNOTSUPP. This is needed because the use of those
functions pointers is usually not checked within the kernel because until now it
was assumed to be a valid function pointer. Instead of fixing all potential
callers we just return a proper error code.
Two new functions provide a clean API to register and unregister a protocol. The
register function expects a pointer to a valid and complete struct protosw including
a pointer to struct pru_usrreqs provided by the caller. Upon successful registration
the pr_init() function will be called to finish initialization of the protocol. The
unregister function restores the SPACER in place of the protocol again. It is the
responseability of the caller to ensure proper closing of all sockets and freeing
of memory allocation by the unloading protocol.
sys/protosw.h
o Define generic PROTO_SPACER to be 32767
o Prototypes for all pru_*_notsupp() functions
o Prototypes for pf_proto_[un]register() functions
kern/uipc_domain.c
o Global struct pr_usrreqs nousrreqs containing valid pointers to the
pru_*_notsupp() functions
o New functions pf_proto_[un]register()
kern/uipc_socket2.c
o New functions bodies for all pru_*_notsupp() functions
the ATA pccard locking function. This makes pccard devices like
Compact Flash cards work again.
PR: kern/72805
Submitted by: James E. Flemer <jflemer@alum.rpi.edu>
MFC in: 2 days
bus_dmamap_create|destroy for the rx and tx descriptor buffers. Since these
buffers are created with bus_dmamem_alloc(), there is no reason to also
create a map, and doing so just wastes memory.
frames. BGE hardware with the rx alignment bug will still be handled by the
calls to m_adj() that already exist. m_adj() is probably better suited for
this task anyways. Just as with if_em, this saves a malloc + several locks
per packet and prevents unneeded data copying within busdma.
Since the e1000 DMA engines hava no constraints on the alignment of buffer
transfers, there is no reason to tell busdma that there is. This save a
minimum of 1 malloc call per packet, which translates to eliminating 4 locks.
It also means that buffers are not needlessly bounced when transfered. The
end result is a 38% improvement in pps in a 4 way bridging environment.
Obtained from: Sandvine, Inc.
(usually taking 20 seconds to transmit a packet).. no longer fall back
to only transmitting one packet (instead of the entire queue) after we
have processed the entire send queue... I have no idea why we didn't
start seeing this problem ~6 years ago when this code was introduced...
(sorele()/sotryfree()):
- This permits the caller to acquire the accept mutex before the socket
mutex, avoiding sofree() having to drop the socket mutex and re-order,
which could lead to races permitting more than one thread to enter
sofree() after a socket is ready to be free'd.
- This also covers clearing of the so_pcb weak socket reference from
the protocol to the socket, preventing races in clearing and
evaluation of the reference such that sofree() might be called more
than once on the same socket.
This appears to close a race I was able to easily trigger by repeatedly
opening and resetting TCP connections to a host, in which the
tcp_close() code called as a result of the RST raced with the close()
of the accepted socket in the user process resulting in simultaneous
attempts to de-allocate the same socket. The new locking increases
the overhead for operations that may potentially free the socket, so we
will want to revise the synchronization strategy here as we normalize
the reference counting model for sockets. The use of the accept mutex
in freeing of sockets that are not listen sockets is primarily
motivated by the potential need to remove the socket from the
incomplete connection queue on its parent (listen) socket, so cleaning
up the reference model here may allow us to substantially weaken the
synchronization requirements.
RELENG_5_3 candidate.
MFC after: 3 days
Reviewed by: dwhite
Discussed with: gnn, dwhite, green
Reported by: Marc UBM Bocklet <ubm at u-boot-man dot de>
Reported by: Vlad <marchenko at gmail dot com>
modes on a tty structure.
Both the ".init" and the current settings are initialized allowing
the function to be used both at attach and open time.
The function takes an argument to decide if echoing should be enabled.
Echoing should not be enabled for regular physical serial ports
unless they are consoles, in which case they should be configured
by ttyconsolemode() instead.
Use the new function throughout.
the implementation of the following feature in revision 1.4:
- Install Makefile.yp as /var/yp/Makefile.dist and link it to
/var/yp/Makefile only if /var/yp/Makefile doesn't already exist.
Suggested by Peter Wemm.
The actual code was only symlinking when no /var/yp/Makefile.dist
existed, i.e., never.
List of functional changes:
- Make a single device per single node with a single hook.
This gives us parrallelizm, which can't be achieved on a single
node with many devices/hooks. This also gives us flexibility - we
can play with a particular device node, not affecting others.
- Remove read queue as it is. Use struct ifqueue instead. This change
removes a lot of extra memcpy()ing, m_devget()ting and m_copymem()ming.
In ng_device_receivedata() we enqueue an mbuf and wake readers.
In ngdread() we take one mbuf from qeueue and uiomove() it to
userspace. If no mbuf is present we optionally block. [1]
- In ngdwrite() we create an mbuf from uio using m_uiotombuf().
This is faster then uiomove() into buffer, and then m_copydata(),
and this is much better than huge m_pullup().
- Perform locking of device
- Perform locking of connection list.
- Clear out _rcvmsg method, since it does nothing good yet.
- Implement NGM_DEVICE_GET_DEVNAME message.
- #if 0 ioctl method, while nothing is done here yet.
- Return immediately from ngdwrite() if uio_resid == 0.
List of tidyness changes:
- Introduce device2priv(), to remove cut'n'paste.
- Use MALLOC/FREE, instead of malloc/free.
- Use unit2minor().
- Use UID_ROOT/GID_WHEEL instead of 0/0.
- Define NGD_DEVICE_DEVNAME, use it.
- Use more nice macros for debugging. [2]
- Return Exxx, not -1.
style(9) changes:
- No "#endif" after short block.
- Break long lines.
- Remove extra spaces, add needed spaces.
[1] Obtained from: if_tun.c
[2] Obtained from: ng_pppoe.c
Reviewed by: marks
Approved by: julian (mentor)
MFC after: 1 month
