So, replicate the ATI vendor snoop configuration for the AMD vendor.
I think that this should fix a number of cases where users currently
have to resort to polling or disabling MSI.
MFC after: 1 week
Often, in traiging core files, one only has a traceback of where a
panic occurred. We have probe* and xpt* routines that live in both the
scsi and ata layers with identical names. To make one or the other
stand out, prefix all the probe and xpt routines in ata with an
'a'. I've left the scsi ones alone since they were there first and are
more numerous. I also rejected using #define to do this as being too
confusing. I chose this method because the CAM name for the probe
device was already 'aprobe'.
Normally, this doesn't matter because file scope protects one from
interfering with the other. However, due to the indirect nature of
CAM's state machine, you don't know if the following traceback is
SCSI or ATA:
xpt_done
probedone
xpt_done_process
xpt_done_td
fork_exit
nvme and mmc already have unique names.
MFC: 1 week
Differential revision: https://reviews.freebsd.org/D24825
Right now (well, since I did this in 2011/2012) the rate control code
makes some super bad choices for 11n aggregates/rates, and it tracks
statistics even more questionably.
It's been long enough and I'm now trying to use it again daily, so let's
start by:
* telling the rate control code if it's an aggregate or not;
* being clearer about the TID - yes it can be extracted from the
ath_buf but this way it can be overridden by the caller without
changing the TID itself.
(This is for doing experiments with voice/video QoS at some point..)
* Return an optional field to limit how long the aggregate is in
microseconds. Right now the rate control code supplies a rate table
and the ath aggr form code will look at the rate table and limit
the aggregate size to 4ms at the slowest rate. Yeah, this is pretty
terrible.
* Add some more TODO comments around handling txpower, rate and
handling filtered frames status so if I continue to have spoons for
this I can go poke at it.
If the neighbor entry for an IPv6 TCP session using unmapped
mbufs times out, IPv6 will send an icmp6 dest. unreachable
message. In doing this, it will try to do a software checksum
on the reflected packet. If this is a TCP session using unmapped
mbufs, then there will be a kernel panic.
To fix this, just free packets with unmapped mbufs, rather
than sending the icmp.
Reviewed by: np, rrs
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D24821
admbugs: 956
Submitted by: markj
Reported by: Vishnu Dev TJ working with Trend Micro Zero Day Initiative
Security: FreeBSD-SA-20:13.libalias
Security: CVE-2020-7455
Security: ZDI-CAN-10849
admbugs: 956
Submitted by: ae
Reported by: Lucas Leong (@_wmliang_) of Trend Micro Zero Day Initiative
Reported by: Vishnu working with Trend Micro Zero Day Initiative
Security: FreeBSD-SA-20:12.libalias
Assume gcc is at least 6.4, the oldest xtoolchain in the ports tree.
Assume clang is at least 6, which was in 11.2-RELEASE. Drop conditions
for older compilers.
Reviewed by: imp (earlier version), emaste, jhb
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D24802
The IP_NO_SND_TAG_RL flag to ip{,6}_output() means that the packets
being sent should bypass hardware rate limiting. This is typically used
by modern TCP stacks for rexmits.
This support was added to IPv4 in r352657, but never added to IPv6, even
though rack and bbr call ip6_output() with this flag.
Reviewed by: rrs
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D24822
A fictitious page can have a physical address beyond the end of the RAM.
In the NUMA case there is some special code to handle such pages, but in
the other case the pages are handled the same as normal pages. So, we
cannot assert that the physical address is within RAM addresses.
Suggested by: kib
Reviewed by: kib
X-MFC note: NUMA support has not been MFC-ed
Yes, people shouldn't use bitfields in C for structure parsing.
If someone ever wants a cleanup task then it'd be great to remove them
from this vendor code and other places in the ar9285/ar9287 HALs.
Alas, here we are.
AH_BYTE_ORDER wasn't defined and neither were the two values it could be.
So when compiling ath_ee_print_9300 it'd default to the big endian struct
layout and get a WHOLE lot of stuff wrong.
So:
* move AH_BYTE_ORDER into ath_hal/ah.h where it can be used by everyone.
* ensure that AH_BYTE_ORDER is actually defined before using it!
This should work on both big and little endian platforms.
TRAP_ENTRY(0) should be TRAP_GENTRAP(0) here.
However, in practice, it doesn't matter, as the only time TRAP_ENTRY and
TRAP_GENTRAP can differ is when bridge mode is active, which is impossible
on the 64 bit kernel.
Fix it anyway in case we ever need to add a trap preamble on PPC64.
Unlike the other copy*() functions, it does not serve to copy from one
address space to another or protect against potential faults. It's just
an older incarnation of the now-more-common strlcpy().
Add a coccinelle script to tools/ which can be used to mechanically
convert existing instances where replacement with strlcpy is trivial.
In the two cases which matched, fuse_vfsops.c and union_vfsops.c, the
code was further refactored manually to simplify.
Replace the declaration of copystr() in systm.h with a small macro
wrapper around strlcpy.
Remove N redundant MI implementations of copystr. For MIPS, this
entailed inlining the assembler copystr into the only consumer,
copyinstr, and making the latter a leaf function.
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D24672
Geom_mirror initialization occurs in spurts and the present of a
non-destroyed g_mirror softc does not always indicate that the geom has
launched (i.e., has an sc_provider).
Some gmirror(8) commands (via g_mirror_ctl) depend on a g_mirror's
sc_provider (insert and resize). For those commands, g_mirror_ctl is
modified to sleep-poll in an interruptible way until the target geom is
either launched or destroyed.
Reviewed by: markj
Tested by: markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D24780
If single-threaded process receives a signal during critical section
established by sigfastblock(2) word, unblock did not caused signal
delivery because sigfastblock(SIGFASTBLOCK_UNBLOCK) failed to request
ast handling of the pending signals.
Set TDF_ASTPENDING | TDF_NEEDSIGCHK on unblock or when kernel forces
end of sigfastblock critical section, to cause syscall exit to recheck
and deliver any signal pending.
Reported by: corydoras@ridiculousfish.com
PR: 246385
Sponsored by: The FreeBSD Foundation
There are no in-kernel consumers.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24775
The opencrypto ioctl code has very useful probe points at the various exit
points. These allow us to figure out exactly why a request failed. However, a
few paths did not have these probe points. Add them here.
Reviewed by: jhb
It no longer has any in-kernel consumers via OCF. smbfs still uses
single DES directly, so sys/crypto/des remains for that use case.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24773
It no longer has any in-kernel consumers.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24772
Back out the IPv6 portion of r360903, as the stamp_tag param
is apparently not supported in upstream FreeBSD.
Sponsored by: Netflix
Pointy hat to: gallatin
There are no longer any in-kernel consumers. The software
implementation was also a non-functional stub.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24771
They no longer have any in-tree consumers. Note that these are a
different from MD5-HMAC and SHA1-HMAC and were only used with IPsec.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24770
This was removed from IPsec in r286100 and no longer has any in-tree
consumers.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24769
It no longer has any in-tree consumers.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24768
Although a few drivers supported this algorithm, there were never any
in-kernel consumers. cryptosoft and cryptodev never supported it,
and there was not a software xform auth_hash for it.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24767
The newer RACK and BBR TCP stacks have added a mechanism
to disable hardware packet pacing for TCP retransmits.
This mechanism works by skipping the send-tag stamp
on rate-limited connections when the TCP stack calls
ip_output() with the IP_NO_SND_TAG_RL flag set.
When doing NIC TLS, we must ignore this flag, as
NIC TLS packets must always be stamped. Failure
to stamp a NIC TLS packet will result in crypto
issues.
Reviewed by: hselasky, rrs
Sponsored by: Netflix, Mellanox
pf by default does not do per-table address accounting unless the
"counters" keyword is specified in the corresponding pf.conf table
definition. Yet, we always allocate 12 per-CPU counters per table. For
large tables this carries a lot of overhead, so only allocate counters
when they will actually be used.
A further enhancement might be to use a dedicated UMA zone to allocate
counter arrays for table entries, since close to half of the structure
size comes from counter pointers. A related issue is the cost of
zeroing counters, since counter_u64_zero() calls smp_rendezvous() on
some architectures.
Reported by: loos, Jim Pingle <jimp@netgate.com>
Reviewed by: kp
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D24803
Pursuant to r360398, implement driver-specific versions of the
ifdi_needs_restart iflib device method.
Some (if not most?) Intel network cards don't need reinitializing when a
VLAN is added or removed from the device hardware, so these implement
ifdi_needs_restart in a way that tell iflib not to bring the interface
up or down when a VLAN is added or removed, regardless of whether the
VLAN_HWFILTER interface capability flag is set or not.
This could potentially solve several PRs relating to link flaps that
occur when VLANs are added/removed to devices.
Signed-off-by: Eric Joyner <erj@freebsd.org>
PR: 240818, 241785
Reviewed by: gallatin@, olivier@
MFC after: 3 days
MFC with: r360398
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D24659
We know the value must be greater than 0 and less than MAXSECFLAVORS.
Reject values outside this range in the initial check in vfs_export and add KASSERTs
in the later consumers.
Also check that we are called with one of either MNT_DELEXPORT or MNT_EXPORTED set.
Reviewed by: rmacklem
Approved by: mav (mentor)
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D24753
rnh_close callbackes was used by the in[6]_clsroute() handlers,
doing cleanup in the route cloning code. Route cloning was eliminated
somewhere around r186119. Last callback user was eliminated in r186215,
11 years ago.
Differential Revision: https://reviews.freebsd.org/D24793
Ok, yeah, the commit title is a bit misleading.
This has to do with CDD (cyclic delay diversity) - how this and later
wifi hardware transmits lower rates over more antennas. Eg, if you're
transmitting legacy 11abg rates on 2 or 3 antennas, you COULD just
send them all at the same time or you could delay each by tens/hundreds
of nanoseconds to try and get some better diversity characteristics.
However, this has a fun side effect - the antenna pattern is no longer
a bunch of interacting dipoles, but are a bunch of interacting dipoles
plus a bunch of changing phases. And it's frequency dependent - 50-200nS
is not exactly the same fraction of a wavelength across all of 2GHz or 5GHz!
Thus the power spectral density and maximum directional gain that you're
effectively getting is not .. well, as flat as it once was.
For more information, look up FCC/OET 13TR1003 in the FCC technical report
database. It has pretty graphics and everything.
Anyway, the problem lies thusly - the CDD code just subtracts another 3dB
or 5dB for the lower rates based on transmit antenna configuration.
However, it's not done based on operating configuration and it doesn't
take into account how far from any regulatory limits the hardware is at.
It also doesn't let us do things like transmit legacy rates and frames
on a single antenna without losing up to 5dB when we absolutely don't
need to in that case (there's no CDD used when one antenna is used!)
This shows up as the hardware behaving even worse for longer distance links
at 20MHz because, well, those are the exact rates losing a bunch more
transmit power.
* For lower power NICs (ie the majority of what is out there!) it's highly
unlikely we're going to hit anywhere near the PSD limits.
* It's doing it based on the existing limits from the CTL table (conformance
testing limits) - this isn't the regulatory max! It's what the NIC is
allowed to put out in each frequency and rate configuration! So things like
band edges, power amplifier behaviour and maximum current draw apply here.
Blindly subtracting 3 to 5dB from /this/ value is /very/ conservative..
* /and/ ath9k just plainly doesn't do any of this at all.
So, for now disable it and get the TX power back, thus matching what ath9k
in Linux is doing. If/once I get some more cycles I'll look at making it
a bit more adaptive and really only kick in if we're a few dB away from
hard regulatory limits.
Tested:
* AR9344 (2GHz + SoC, 2x2 configuration) - AP and STA modes
* QCA9580 (5GHz 2x2 and 3x3 configurations) - AP and STA modes
Summary:
POWER9 supports two MMU formats: traditional hashed page tables, and Radix
page tables, similar to what's presesnt on most other architectures. The
PowerISA also specifies a process table -- a table of page table pointers--
which on the POWER9 is only available with the Radix MMU, so we can take
advantage of it with the Radix MMU driver.
Written by Matt Macy.
Differential Revision: https://reviews.freebsd.org/D19516
Summary:
Some machine checks are process-recoverable, others are not. Let a
CPU-specific handler decide what to do.
This works around a machine check error hit while building www/firefox
and mail/thunderbird, which would otherwise cause the build to fail.
More work is needed to handle all possible machine check conditions, but
this is sufficient to unblock some ports building.
Differential Revision: https://reviews.freebsd.org/D23731
r360870 added linux/slab.h into liunx/bitmap.h and this include linux/types.h
The qlnx driver is redefining some of those types so remove them and add an
explicit linux/types.h include.
Pointy hat: manu
Reported by: Austin Shafer <ashafer@badland.io>
This is a simple call to kmallock_array/kfree, therefore include linux/slab.h as
this is where the kmalloc_array/kfree definition is.
Sponsored-by: The FreeBSD Foundation
Reviewed by: hselsasky
Differential Revision: https://reviews.freebsd.org/D24794
