From the original commit:
==
* Actually look at the first channel in the list. If it's a 2.4GHz channel,
set IWM_PHY_BAND_24 flag. The IWM_PHY_BAND_5 flag is 0 anyway, so we
don't need to look further.
* While there factor out the iwm_mvm_rrm_scan_needed() tlv capability check.
Taken-From: Linux iwlwifi
==
However, this only really does the latter. The sc_ic channel list isn't the
scan channel list, it's the /whole list/ for the set of active channels,
so I don't know what the right thing to do is here.
So I'll commit this as an intermediary commit and we'll have to revisit whether
to finish the refactor as-is.
Tested:
* Intel 7260, STA mode
Obtained from: dragonflybsd.git 53a009d6f66108b40d622ed90ea95eba5c0e5432
__ILP32__/__LP64__ instead of by architecture.
The list was incomplete (previous commits purged invalid architectures,
like __alpha__, but failed to add new ones). It's best to base the symbol
presence on whether or not the architecture is ILP32 / LP64 capable, per
the compiler.
This fixes the ILP32/LP64 program environments on some architectures like
arm64, and by proxy fixes the tests on those architectures.
MFC after: 1 month
Reviewed by: no one (timed out on feedback from imp)
Differential Revision: D10787
i.e., when print_only is called.
Prior to this change, -rq was always returning 0. After this change it will
return 1 if there is a difference between two directories.
This fixes compatibility with GNU diff and unbreaks backwards compatibility
expectations.
Found when trying to extend diff_test:brief_format_test.
MFC after: 2 months
MFC with: r321076, r321077
-q is specified.
This improves compatibility with GNU diff.
Found by accident with `diff -Nrq /usr/tests /usr/tests.new | grep Kyuafile`.
MFC after: 2 months
Relnotes: yes
- Deal with changes to port_type, and not just port_mod when a
transceiver is changed. This fixes hot swapping of transceivers of
different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or
SFP28 in a SFP28 port, etc.).
- Always refresh media information for ifconfig if the port is down.
The firmware does not generate tranceiver-change interrupts unless at
least one VI is enabled on the physical port. Before this change
ifconfig diplayed potentially stale information for ports that were
administratively down.
- Always recalculate and reapply L1 config on a transceiver change.
- Display PAUSE settings in ifconfig. The driver sysctls for this
continue to work as well.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
that start in 1970, assume most conversions are going to be for recent dates
and use a precomputed number of days through the end of 2016.
This is a do-over of r320997, hopefully this time with 100% more workiness.
The first attempt had an off-by-one error, but instead of just adding
another mysterious +1 adjustment, this rearranges the relationship between
recent_base_year and recent_base_days so that the latter is the number of
days that occurred before the start of the associated year (instead of the
count thru the end of that year). This makes the recent_base stuff work
more like the original loop logic that didn't need any +1 adjustments.
Previously these were shown only for MIPS objects.
Obtained from: ELF Tool Chain r3564
MFC after: 1 week
MFC with: r321045
Sponsored by: The FreeBSD Foundation
Some non-processor-specific DT_* values overlap the range DT_LOPROC to
DT_HIPROC. Handle common ones first, then the processor-specific ones.
Obtained from: ELF Tool Chain r3563
Sponsored by: The FreeBSD Foundation
While there, appropriately handle the overhead depending on
the usage of DATA or I-DATA chunks. Take the overhead only
into account, when required.
Joint work with rrs@
MFC after: 1 week
Copy the most important test cases from OpenBSD's corresponding
src/regress/sbin/pfctl, those that run pfctl on a test input file and check
correctness of its output. We have also added some new tests using the same
format.
The tests consist of a collection of input files (pf*.in) and
corresponding output files (pf*.ok). We run pfctl -nv on the input
files and check that the output matches the output files. If any
discrepancy is discovered during future development in the source
tree, we know that a regression bug has been introduced into the tree.
Submitted by: paggas
Sponsored by: Google, Inc (GSoC 2017)
Differential Revision: https://reviews.freebsd.org/D11322
delete subcommand in the modify section. Rewrite the
modify description text in two places to say modify/modified
instead of remove/removed.
PR: 220710
Submitted by: sseekamp@risei.net
Reviewed by: mav@
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11608
this file. Previously, half of the pointers to a vm_page being used as
a page directory page were named "pdpg" and the rest were named "mpde".
Discussed with: kib
MFC after: 1 week
Following up on r320900, where the check for negative count values was
removed, add a check to prevent integer overflow. This is to account that
b_count, b_waiters but most importantly the total number of threads in
the system are signed values.
Discussed with: kib
MFC after: 2 weeks
pmap_remove_ptes(). (This new function will also be used by an upcoming
change to pmap_enter() that adds support for psind == 1 mappings.)
Submitted by: Yufeng Zhou <yz70@rice.edu> (an earlier version)
Reviewed by: kib, markj
MFC after: 1 week
This appears to have been an oversight in r213536.
Reviewed by: markj
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D11521
These are taken directly from the density report from a TS1155
tape drive. (Using mt getdensity)
lib/libmt/mtlib.c:
Add 3592B5 encrypted/unencrypted density codes, and bpmm/bpi
values. The bpmm/bpi values are the same as TS1150, but
there are 50% more tracks.
usr.bin/mt/mt.1:
Add 3592B5 encrypted/unencrypted density codes, bpmm/bpi
values and number of tracks. Bump the man page date.
MFC after: 3 days
Sponsored by: Spectra Logic
the IO type (Admin or NVM) using XPT op-codes XPT_NVME_ADMIN or
XPT_NVME_IO.
Submitted by: Chuck Tuffli <chuck@tuffli.net>
Differential Revision: https://reviews.freebsd.org/D10247
Using the https://github.com/google/capsicum-test/ suite, the
PosixMqueue.CapModeForked test was failing due to an ECAPMODE after
calling kmq_notify(). On further inspection, the dynamically
loaded syscall entry was initialized with sy_flags zeroed out, since
SYSCALL_INIT_HELPER() left sysent.sy_flags with the default value.
Add a new helper SYSCALL{,32}_INIT_HELPER_F() which takes an
additional argument to specify the sy_flags value.
Submitted by: Siva Mahadevan <smahadevan@freebsdfoundation.org>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D11576
Fix minor -Werror issues when building with gcc from -Wredundant-decls,
-Wunused, -Wbool-operations. Also ensure the M_IXL malloc type is only
defined once.
Reviewed by: efj
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11414
Remove aio_test's legacy timeout handling and cleanup routines. Instead,
use ATF's builtin capabilities. ATF automatically cleans up newly created
files, too, so we don't have to explicitly unlink them. The only tests than
need a cleanup routine are the md(4) tests, which must destroy their md
device.
Reviewed by: jhb
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D11468
This also avoids compiling in pci_iov support into the kernel if_ixoif
the PCI_IOV option is disabled.
Reviewed by: rstone
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11573
From Brett:
In short, busdma maps for received packets were not being unloaded in the
interrupt handler before the packets were passed up the network stack. The fix
was to add a busdma sync and unload for the two receive maps.
This bug is significant for certain busdma providers, for example IOMMUs,
where not unloading the maps means that 1) the IOMMU mappings that allow the
NIC to DMA the received packets into host memory stay open indefinitely,
potentially violating a desired security policy, and 2) resources such as
device address space addresses and host memory for bookkeeping are never freed.
Without an IOMMU or bounce buffering enabled for the ixl device, I don't think
adding these calls will have any significant performance impact. With the
IOMMU enabled, I have noticed a performance impact on the receive side, which
is expected.
Submitted by: Brett Gutstein <bgutstein@rice.edu>
Reviewed by: erj@
MFC after: 1 week
Also add some checks for overflow to existing functions.
Reviewed by: hselasky
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11533
