interface. Once the limit is reached packets with unknown source addresses are
dropped until an existing host cache entry expires or is removed. Useful to
use with the STICKY cache option.
Sponsored by: miniSuperHappyDevHouse NZ
a private softc list is needed neither for tracking clones in general
nor for destroying all clones before the module unload -- if_clone
takes care of all that. (Note that some other interface drivers do
need a softc list to be able to scan it for their private purposes.)
from Mac OS X Leopard--rationalize naming for entry points to
the following general forms:
mac_<object>_<method/action>
mac_<object>_check_<method/action>
The previous naming scheme was inconsistent and mostly
reversed from the new scheme. Also, make object types more
consistent and remove spaces from object types that contain
multiple parts ("posix_sem" -> "posixsem") to make mechanical
parsing easier. Introduce a new "netinet" object type for
certain IPv4/IPv6-related methods. Also simplify, slightly,
some entry point names.
All MAC policy modules will need to be recompiled, and modules
not updates as part of this commit will need to be modified to
conform to the new KPI.
Sponsored by: SPARTA (original patches against Mac OS X)
Obtained from: TrustedBSD Project, Apple Computer
Specifically, if two threads were doing concurrent lookups and the existing
gateway was marked down, the the first thread would drop a reference on the
gateway route and then unlock the "root" route while it tried to allocate
a new route. The second thread could then also drop a reference on the
same gateway route resulting in a reference underflow. Fix this by
clearing the gateway route pointer after dropping the reference count but
before dropping the lock. Secondly, in this same case, the second thread
would overwrite the gateway route pointer w/o free'ing a reference to the
route installed by the first thread. In practice this would probably just
fix a lost reference that would result in a route never being freed.
This fixes panics observed in rt_check() and rtexpunge().
MFC after: 1 week
PR: kern/112490
Insight from: mehuljv at yahoo.com
Reviewed by: ru (found the "not-setting it to NULL" part)
Tested by: several
queue so the output network card must support the same tagging mechanism as
how the frame was input (prepended Ethernet header tag or stripped HW mflag).
Now the vlan Ethernet header is _always_ stripped in ether_input and the mbuf
flagged, only only network cards with VLAN_HWTAGGING enabled would properly
re-tag any outgoing vlan frames.
If the outgoing interface does not support hardware tagging then readd the vlan
header to the front of the frame. Move the common vlan encapsulation in to
ether_vlanencap().
Reported by: Erik Osterholm, Jon Otterholm
MFC after: 1 week
This fixes the process portion of the bpf(4) stats if the peer forks
into the background after it's opened the descriptor. This bug
results in the following behavior for netstat -B:
# netstat -B
Pid Netif Flags Recv Drop Match Sblen Hblen Command
netstat: kern.proc.pid failed: No such process
78023 em0 p--s-- 2237404 43119 2237404 13986 0 ??????
MFC after: 1 week
1. The locking was changed to shared but roundrobin mode still updated a
pointer in the softc with the next tx interface to use. This will panic
under high load. Change this to an atomically incremented sequence number in
order to choose the tx port in round robin.
2. IFQ_HANDOFF will free the mbuf if the queue is full, this will then be freed
again by lagg_start() and panic. Reorganised the error handling and freeing
to fix this.
MFC after: 3 days
route and once they are done with it, call rtfree(). rtfree() should
only be used when we are certain we hold the last reference to the
route. This bug results in console messages like the following:
rtfree: 0xc40f7000 has 1 refs
This patch switches the rtfree() to use RTFREE_LOCKED() instead,
which should handle the reference counting on the route better.
Approved by: re@ (gnn)
Reviewed by: bms
Reported by: many via net@ and current@
Tested by: many
matches the BPF registers (which are the only thing that is assigned
to/from BPF memory). This is a pedantic change that shouldn't change
any behaviour.
PR: 115931
Submitted by: Matthew Luckie <mjl@luckie.org.nz>
Approved by: re (bmah)
MFC after: 3 weeks
flags, the absense of these flags causes problems in other areas such as
bridging which expect them to be correct.
At the moment only Ethernet DLTs are checked.
Reviewed by: bms, csjp, sam
Approved by: re (bmah)
active in failover mode rather than all interfaces with a link. This makes it
clear if the master interface is in use or one of the backup links.
Found by: Writing the Handbook section
Approved by: re (kensmith)
previously conditionally acquired Giant based on debug.mpsafenet. As that
has now been removed, they are no longer required. Removing them
significantly simplifies error-handling in the socket layer, eliminated
quite a bit of unwinding of locking in error cases.
While here clean up the now unneeded opt_net.h, which previously was used
for the NET_WITH_GIANT kernel option. Clean up some related gotos for
consistency.
Reviewed by: bz, csjp
Tested by: kris
Approved by: re (kensmith)
- If the path cost is calculated when the link is down, set a pending flag so
it is calculated again when it comes back up.
- To not use 00:00:00:00:00:00 as the bridge id, all interfaces are scanned and
the lowest number wins. All zeros is too low.
Approved by: re (rwatson)
communicate with another private port.
All unicast/broadcast/multicast layer2 traffic is blocked so it works much the
same way as using firewall rules but scales better and is generally easier as
firewall packages usually do not allow ARP blocking.
An example usage would be having a number of customers on separate vlans
bridged with a server network. All the vlans are marked private, they can all
communicate with the server network unhindered, but can not exchange any
traffic whatsoever with each other.
Approved by: re (rwatson)
ports to the lagg interface.
- Use the MTU from the first interface as the lagg MTU, all extra interfaces
must be the same.
This fixes using a lagg interface for a vlan or enabling jumbo frames, etc.
Approved by: re (kensmith)
MFC After: 3 days
framework for non-MPSAFE network protocols:
- Remove debug_mpsafenet variable, sysctl, and tunable.
- Remove NET_NEEDS_GIANT() and associate SYSINITSs used by it to force
debug.mpsafenet=0 if non-MPSAFE protocols are compiled into the kernel.
- Remove logic to automatically flag interrupt handlers as non-MPSAFE if
debug.mpsafenet is set for an INTR_TYPE_NET handler.
- Remove logic to automatically flag netisr handlers as non-MPSAFE if
debug.mpsafenet is set.
- Remove references in a few subsystems, including NFS and Cronyx drivers,
which keyed off debug_mpsafenet to determine various aspects of their own
locking behavior.
- Convert NET_LOCK_GIANT(), NET_UNLOCK_GIANT(), and NET_ASSERT_GIANT into
no-op's, as their entire behavior was determined by the value in
debug_mpsafenet.
- Alias NET_CALLOUT_MPSAFE to CALLOUT_MPSAFE.
Many remaining references to NET_.*_GIANT() and NET_CALLOUT_MPSAFE are still
present in subsystems, and will be removed in followup commits.
Reviewed by: bz, jhb
Approved by: re (kensmith)
will intialize the the header length and re-initialize the mbuf pointer
to reference the mbuf that is allocated after moving user supplied packet
data in.
ioctl routines if we are running with !mpsafenet
- Change un-conditional Giant acquisition around ifpromisc
to occur only if we are running with !mpsafenet
With these locking bits in place, we can now remove the Giant
requirement from BPF, so drop the D_NEEDGIANT device flag.
This change removes Giant acquisitions around BPF device
handlers (read, write, ioctl etc).
MFC after: 1 month
Discussed with: rwatson
bridged, previously legitimate traffic was not passed as the bridge could not
tell that it was on a different Ethernet segment.
All non-tagged traffic is treated as vlan1 as per IEEE 802.1Q-2003
tunnels, and was not MPSAFE. The code can be easily restored in the
event that someone with an IPX over IP tunnel configuration can work
with me to test patches.
This removes one of five remaining consumers of NET_NEEDS_GIANT.
Approved by: re (kensmith)
o major overhaul of the way channels are handled: channels are now
fully enumerated and uniquely identify the operating characteristics;
these changes are visible to user applications which require changes
o make scanning support independent of the state machine to enable
background scanning and roaming
o move scanning support into loadable modules based on the operating
mode to enable different policies and reduce the memory footprint
on systems w/ constrained resources
o add background scanning in station mode (no support for adhoc/ibss
mode yet)
o significantly speedup sta mode scanning with a variety of techniques
o add roaming support when background scanning is supported; for now
we use a simple algorithm to trigger a roam: we threshold the rssi
and tx rate, if either drops too low we try to roam to a new ap
o add tx fragmentation support
o add first cut at 802.11n support: this code works with forthcoming
drivers but is incomplete; it's included now to establish a baseline
for other drivers to be developed and for user applications
o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates
prepending mbufs for traffic generated locally
o add support for Atheros protocol extensions; mainly the fast frames
encapsulation (note this can be used with any card that can tx+rx
large frames correctly)
o add sta support for ap's that beacon both WPA1+2 support
o change all data types from bsd-style to posix-style
o propagate noise floor data from drivers to net80211 and on to user apps
o correct various issues in the sta mode state machine related to handling
authentication and association failures
o enable the addition of sta mode power save support for drivers that need
net80211 support (not in this commit)
o remove old WI compatibility ioctls (wicontrol is officially dead)
o change the data structures returned for get sta info and get scan
results so future additions will not break user apps
o fixed tx rate is now maintained internally as an ieee rate and not an
index into the rate set; this needs to be extended to deal with
multi-mode operation
o add extended channel specifications to radiotap to enable 11n sniffing
Drivers:
o ath: add support for bg scanning, tx fragmentation, fast frames,
dynamic turbo (lightly tested), 11n (sniffing only and needs
new hal)
o awi: compile tested only
o ndis: lightly tested
o ipw: lightly tested
o iwi: add support for bg scanning (well tested but may have some
rough edges)
o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data
o wi: lightly tested
This work is based on contributions by Atheros, kmacy, sephe, thompsa,
mlaier, kevlo, and others. Much of the scanning work was supported by
Atheros. The 11n work was supported by Marvell.
the value of ph_nhooks to zero, not the address. This removes
extranious calls to pfil_run_hooks (and an rw lock) from the
network stack's critical path when no pfil hooks are active.
Reviewed by: csjp
Sponsored by: Myricom Inc.
which support a 2.5Gbps mode over fiber using next page extensions during
autonegotiation. Typically only found in blade systems which also include
a Broadcom 2.5Gbps capable switch.
MFC after: 2 weeks
as to the type of the command argument: int -> u_long.
These types have different widths in the 64-bit world.
Add a note to UPDATING because the change breaks KBI
on 64-bit platforms.
Discussed on: -net, -current
Reviewed by: bms, ru
- In rt_check() remove the senderr() macro and the "bad" label. They
used to simplify code, but now aren't.
- Remove extra RT_LOCK_ASSERT() in rt_setgate(). The RT_REMREF macro
does this.
- In rtfree() convert panics to KASSERTs.
- Strict the routing API: rtfree() should be called only in a case
when we are completely sure we've got the last reference on the
rtentry. In all other cases RTFREE_LOCKED() macro should be used.
If the reference isn't the last one spit out a warning printf.
Correct the only(?) case for this in rt_check().
- Fix typos in comments.
of each port and any further packets are blocked, when the all the marker frames
have been returned to us from the remote network device then we can be sure
that all interface queues are empty.
This is needed when a port is added or removed from the aggregation since it
will affect the hash based distribution, if the queues are not empty then a
packet from an existing connection may be placed on a different interface and
arrive out of order. This was previously achieved by suppressing transmission for
1 second, now that there is an active feedback this timeout as been increased
to 3 seconds and used as a fallback.
The name trunk is misused as the networking term trunk means carrying multiple
VLANs over a single connection. The IEEE standard for link aggregation (802.3
section 3) does not talk about 'trunk' at all while it is used throughout IEEE
802.1Q in describing vlans.
The lagg(4) driver provides link aggregation, failover and fault tolerance.
Discussed on: current@
tolerance. This driver allows aggregation of multiple network interfaces as
one virtual interface using a number of different protocols/algorithms.
failover - Sends traffic through the secondary port if the master becomes
inactive.
fec - Supports Cisco Fast EtherChannel.
lacp - Supports the IEEE 802.3ad Link Aggregation Control Protocol
(LACP) and the Marker Protocol.
loadbalance - Static loadbalancing using an outgoing hash.
roundrobin - Distributes outgoing traffic using a round-robin scheduler
through all active ports.
This code was obtained from OpenBSD and this also includes 802.3ad LACP support
from agr(4) in NetBSD.
doesn't need to be first in softc now. (It was the whole
ifnet structure itself that needed to be first in the good
old days.) Fix the respective comment accordingly.
Add xrefs to ifnet(9) in some other comments while I'm here.
Pointed out by: thompsa
imitating an Ethernet device, so vlan(4) and if_bridge(4) can be
attached to it for testing and benchmarking purposes. Its source
can be an introduction to the anatomy of a network interface driver
due to its simplicity as well as to a bunch of comments in it.
(The rest of needed changes were in my previous commit, which got
interrupted in the middle. Alas, CVS commits are not atomic.)
sequence. First, if rt_ifa is going to be changed, then call
ifa_rtrequest(RTM_DELETE). Second, if gateway is going to be changed,
then call rt_setgate(). Third, change rt_ifa.
With this change we are able to change a link level route to a
gateway one, that wasn't possible before:
# ifconfig em0 192.168.22.1/24
# arp -s 192.168.22.99 00:11:22:33:44:55
# route change 192.168.22.99 192.168.22.199
# ping 192.168.22.99
db>
Reported by: avatar
structures. Detect when ifnet instances are detached from the network
stack and perform appropriate cleanup to prevent memory leaks.
This has been implemented in such a way as to be backwards ABI compatible.
Kernel consumers are changed to use if_delmulti_ifma(); in_delmulti()
is unable to detect interface removal by design, as it performs searches
on structures which are removed with the interface.
With this architectural change, the panics FreeBSD users have experienced
with carp and pfsync should be resolved.
Obtained from: p4 branch bms_netdev
Reviewed by: andre
Sponsored by: Garance A Drosehn
Idea from: NetBSD
MFC after: 1 month
Main points of this change:
* Drop frames immediately if the interface is not marked IFF_UP.
* Always trim off the frame checksum if present.
* Always use M_VLANTAG in preference to passing 802.1Q frames
to consumers.
* Use __func__ consistently for KASSERT().
* Use the M_PROMISC flag to detect situations where ether_input()
may reenter itself on the same call graph with the same mbuf which
was promiscuously received on behalf of subsystems such as
netgraph, carp, and vlan.
* 802.1P frames (that is, VLAN frames with an ID of 0) will now be
passed to layer 3 input paths.
* Deal with the special case for CARP in a sane way.
This is a significant rewrite of code on the critical path. Please report
any issues to me if they arise. Frames will now only pass through dummynet
if M_PROMISC is cleared, to avoid problems with re-entry.
The handling of CARP needs to be revisited architecturally. The M_PROMISC
flag may potentially be demoted to a link-layer flag only as it is in
NetBSD, where the idea originated.
Discussed on: net
Idea from: NetBSD
Reviewed by: yar
MFC after: 1 month
in case of multiple interfaces with the same MAC in the same bridge.
This commit do not solve the entire problem. Only case where packet
arrived from such interface.
PR: kern/109815
MFC after: 7 days
Submitted by: Eygene Ryabinkin and rik@
Discussed with: bms@, thompsa@, yar@
