Some architectures - armv7, armv8 and riscv use VM_MEMATTR_DEVICE
when mapping device registers in kernel. Do the same in pciconf.
On armada8k SoC all reads from BARs mapped with hitherto attribute
(VM_MEMATTR_UNCACHEABLE) return 0xff's.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: kib
Obtained from: Semihalf
Sponsored by: Marvell
Differential revision: https://reviews.freebsd.org/D29603
freebsd-update compares the dates on man pages with mandoc.db, and if
any newer pages are found it regenerates mandoc.db.
Previously, if mandoc.db did not already exist the check failed and
freebsd-update then failed to create one. Now, check that mandoc.db
exists before performing the check for newer pages.
Reported by: bdrewery (in D10482)
Reviewed by: gordon
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29575
Follow-up to the removal of the mcov from kernel.
Noted by: mckusick
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D29563
This allows the xhci tablet device to be recognized and a PCI device
instantiated.
Reviewed by: jhb
Fixes: 621b509048 Refactor configuration management in bhyve.
MFC after: 3 months.
and other equivalent ways to request mcount-based profiling, like
'profile N' in kernel config.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D29529
An NFSv4 only configuration does not register with
rpcbind(). Without this patch a failure to rpcb_unset()
is reported when the daemon is terminated for this case.
This is harmless noise, but this patch avoids calling
rpcb_unset() for the NFSv4 only case, avoiding the noise.
When called with "-d", it still does the rpcb_unset(),
assuming that the configuration might have been
changed to NFSv4 only and unregistering with
rpcbind() might still be needed.
Reviewed by: freqlabs
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D29449
- Always use distinct sockets for send and recv
- Limit rights on the recv socket
For ICMP6 we were using the same socket for both send and receive, and
we limited rights on the socket such that it's impossible to receive
anything.
PR: 254623
Diagnosed by: Zhenlei Huang <zlei.huang@gmail.com>
Reviewed by: oshogbo
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D29523
The old prototype requires callers to inspect flags of each descriptors
to get the starting position of host-writable iovecs.
vq_getchain() is changed to return a virtio request with the number of
host-readable iovecs and host-writable iovecs instead. Callers can avoid
boilerplate code of getting the start offset of host-writable iovecs.
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Reviewed by: afedorov
Approved by: philip (mentor)
Differential Revision: https://reviews.freebsd.org/D29433
The previous commit added the handler to parse the command line
options for virtio-scsi devices but forgot to set the correct function
pointer to point to the handler.
Reported by: vangyzen
Reviewed by: vangyzen
Fixes: 621b509048
Differential Revision: https://reviews.freebsd.org/D29438
When lockd is configured with a debug level of > 0 and foreground == 0,
the process is daemonized with a truth noclose argument to daemon().
This doesn't seem to be the desired behavior because that prevents
stdout and stderr from being closed, however, stdout and stderr aren't
used anywhere else. Furthermore, the man pages state that with a higher
debug level it will use the syslog facilities to do so.
Submitted by: Caleb St. John
Discussed with: rmacklem
MFC after: 3 days
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D29415
If the disk parameter "DEFAULT" is set in place of an actual device name,
or no disk is specified for the PARTITIONS parameter, the installer will
follow the logic used in the automatic-partitioning mode, in which it
will either provide a selection dialog for one of several disks if
several are present or automatically select it if there is only one. This
simplifies the creation of fully-automatic installation media for
hardware or VMs with varying disk names.
Suggested by: Egoitz Aurrekoetxea <egoitz@sarenet.es>
MFC after: 3 weeks
Relnotes: yes
There are scenarios where an NFS client will mount an NFSv4 export
without specifying a callback address.
When running nfsdumpstate under this circumstance, the column output is
shifted incorrectly which places the "ClientID" value underneath the
"Clientaddr" column.
This diff is a small cosmetic change that prints a blank in the
"Clientaddr" column and ensures the data for the columns are aligned
appropriately.
Submitted by: Caleb St. John
Reviewed by: sef (previous version)
MFC after: 3 days
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D18958
"device" is already used as the generic PCI-level name of the device
model to use (e.g. "hostbridge"). The result was that parsing
"hostbridge" as an integer failed and the host bridge used a device ID
of 0. The EFI ROM asserts that the device ID of the hostbridge is not
0, so booting with the current EFI ROM was failing during the ROM
boot.
Fixes: 621b509048
An install using -DNO_ROOT emits mtree entries containing tags used by
pkgbase. makefs(8) can safely ignore them, so do that rather than
emitting a warning for each entry.
Reviewed by: brooks, imp
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29384
Add a -M option to control the maximum length of forwarded messages.
syslogd(8) used to truncate forwarded messages to 1024 bytes, but after
commit 1a874a126a ("Add RFC 5424 syslog message output to syslogd.")
applies a more conservative limit of 480 bytes for IPv4 per RFC 5426
section 3.2. Restore the old default behaviour of truncating to 1024
bytes. RFC 5424 specifies no upper limit on the length of forwarded
messages, while for RFC 3164 the limit is 1024 bytes.
Increase MAXLINE to 8192 bytes to correspond to commit 672ef817a192.
Replaced bootfile[] size for MAXPATHLEN used in getbootfile(3) as a
returned value. Using (MAXLINE+1) as a size for bootfile[] is excessive.
PR: 241937
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D27206
Because the ESP mount point (/boot/efi) is in mtree, tar will attempt to
extract a directory at that point post-mount when the system is installed.
Normally, this is fine, since tar can happily set whatever properties it
wants. For FAT32 file systems, however, like the ESP, tar will attempt to
set mtime on the root directory, which FAT does not support, and tar will
interpret this as a fatal error, breaking the install (see
https://github.com/libarchive/libarchive/issues/1516). This issue would
also break scripted installs on bare-metal POWER8, POWER9, and PS3
systems, as well as some ARM systems.
This patch solves the problem in two ways:
- If stdout is a TTY, use the distextract stage instead of tar, as in
interactive installs. distextract solves this problem internally and
provides a nicer UI to boot, but requires a TTY.
- If stdout is not a TTY, use tar but, as a stopgap for 13.0, exclude
boot/efi from tarball extraction and then add it by hand. This is a
hack, and better solutions (as in the libarchive ticket above) will
obsolete it, but it solves the most common case, leaving only
unattended TTY-less installs on a few tier-2 platforms broken.
In addition, fix a bug with fstab generation uncovered once the tar issue
is fixed that umount(8) can depend on the ordering of lines in fstab in a
way that mount(8) does not. The partition editor now writes out fstab in
mount order, making sure umount (run at the end of scripted, but not
interactive, installs) succeeds.
PR: 254395
Reviewed by: gjb, imp
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D29380
In particular:
- There is no need to do anything with gpart (the installer does that
for you).
- There is no need to specify the network interface, since we have
an option for defaults.
The header specifies the size of the option in multiples of eight bytes.
The option consists of an eight-byte header followed by one or more IPv6
addresses, so the option is invalid if the size is not equal to 1+2n for
some n>0. Check this.
The bug can cause random stack data to be formatted as an IPv6 address
and passed to resolvconf(8), but a host able to trigger the bug may also
specify arbitrary addresses this way.
Reported by: Q C <cq674350529@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
We want to allow the UEFI firmware to enumerate and assign
addresses to PCI devices so we can boot from NVMe[1]. Address
assignment of PCI BARs is properly handled by the PCI emulation
code in general, but a few specific cases need additional support.
fbuf and passthru map additional objects into the guest physical
address space and so need to handle address updates. Here we add a
callback to emulated PCI devices to inform them of a BAR
configuration change. fbuf and passthru then watch for these BAR
changes and relocate the frame buffer memory segment and passthru
device mmio area respectively.
We also add new VM_MUNMAP_MEMSEG and VM_UNMAP_PPTDEV_MMIO ioctls
to vmm(4) to facilitate the unmapping needed for addres updates.
[1]: https://github.com/freebsd/uefi-edk2/pull/9/
Originally by: scottph
MFC After: 1 week
Sponsored by: Intel Corporation
Reviewed by: grehan
Approved by: philip (mentor)
Differential Revision: https://reviews.freebsd.org/D24066
Replace the existing ad-hoc configuration via various global variables
with a small database of key-value pairs. The database supports
heirarchical keys using a MIB-like syntax to name the path to a given
key. Values are always stored as strings. The API used to manage
configuation values does include wrappers to handling boolean values.
Other values use non-string types require parsing by consumers.
The configuration values are stored in a tree using nvlists. Leaf
nodes hold string values. Configuration values are permitted to
reference other configuration values using '%(name)'. This permits
constructing template configurations.
All existing command line arguments now set configuration values. For
devices, the "-s" option parses its option argument to generate a list
of key-value pairs for the given device.
A new '-o' command line option permits setting an individual
configuration variable. The key name is always given as a full path
of dot-separated components.
A new '-k' command line option parses a simple configuration file.
This configuration file holds a flat list of 'key=value' lines where
the 'key' is the full path of a configuration variable. Lines
starting with a '#' are comments.
In general, bhyve starts by parsing command line options in sequence
and applying those settings to configuration values. Once this is
complete, bhyve then begins initializing its state based on the
configuration values. This means that subsequent configuration
options or files may override or supplement previously given settings.
A special 'config.dump' configuration value can be set to true to help
debug configuration issues. When this value is set, bhyve will print
out the configuration variables as a flat list of 'key=value' lines.
Most command line argments map to a single configuration variable,
e.g. '-w' sets the 'x86.strictmsr' value to false. A few command
line arguments have less obvious effects:
- Multiple '-p' options append their values (as a comma-seperated
list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number).
- For '-s' options, a pci.<bus>.<slot>.<function> node is created.
The first argument to '-s' (the device type) is used as the value of
a "device" variable. Additional comma-separated arguments are then
parsed into 'key=value' pairs and used to set additional variables
under the device node. A PCI device emulation driver can provide
its own hook to override the parsing of the additonal '-s' arguments
after the device type.
After the configuration phase as completed, the init_pci hook
then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the
"device" value to find the device model to use. The device
model's init routine is passed a reference to its nvlist node
in the configuration tree which it can query for specific
variables.
The result is that a lot of the string parsing is removed from
the device models and centralized. In addition, adding a new
variable just requires teaching the model to look for the new
variable.
- For '-l' options, a similar model is used where the string is
parsed into values that are later read during initialization.
One key note here is that the serial ports use the commonly
used lowercase names from existing documentation and examples
(e.g. "lpc.com1") instead of the uppercase names previously
used internally in bhyve.
Reviewed by: grehan
MFC after: 3 months
Differential Revision: https://reviews.freebsd.org/D26035
Definitions inside usr.sbin/bhyve/virtio.h are thrown away.
Definitions in sys/dev/virtio are used instead.
This reduces code duplication.
Sponsored by: The FreeBSD Foundation
Reviewed by: grehan
Approved by: philip (mentor)
Differential Revision: https://reviews.freebsd.org/D29084
The package extension is going to be changed to .bsd to be among other
things resilient to the change of compression format used and reduce
the impact of all third party tool of that change.
Ensure the bootstrap knows about it
Reviewed by: manu
Differential revision: https://reviews.freebsd.org/D29232
Remove references for: athdebug(8), athstats(8) and wlanstats(8)
Those are tools in the tools/ directory that are not built as part of the base
system. According to the toolds/README file:
"...these tools are not meant to be built as part of the standard system..."
Even more, the tools/tools/README is not udpated and wlanstats does not even
built on current:
error: cast from 'struct sockaddr *' to 'const struct sockaddr_dl *' increases
required alignment from 1 to 2 [-Werror,-Wcast-align]
PR: 227174
Reported by: freebsd.org@alexandrews.me.uk
Reviewed by: gbe@ adrian@
Approved by: gbe@ (mentor) adrian@
Differential Revision: https://reviews.freebsd.org/D29033
When an automounted filesystem is successfully unmounted, call
rpc.umntall(8) with the -k flag.
rpc.umntall(8) is used to clean up /var/db/mounttab on the client and
/var/db/mountdtab on the server. This is only useful for NFSv3.
PR: 251906
Reviewed by: trasz
Differential Revision: https://reviews.freebsd.org/D27801
The pwm utility cant set the only flag defined (PWM_POLARITY_INVERTED) so this
patch add the option -I (capital letter i) to send it to the drivers.
None of existing PWM driver have implemented support for flags.
But soon:ish I will put up an review of a pwm driver using TI OMAP DMTimer.
Differential Revision: https://reviews.freebsd.org/D29137
MFC after: 2 weeks
Daniel reported that NFSv4 mounts were not working despite having
set "nfsv4_server_enable=YES" in /etc/rc.conf. Mountd was logging a
message that there was no /etc/exports file.
He noted that creating a /etc/exports file with a "V4:" line in it
was needed make NFSv4 mounts work.
At least one "V4:" line in one of the exports(5) file(s) is needed to
make NFSv4 mounts work. This patch fixes mountd.c so that it logs a
message indicting that there is no "V4:" line in any exports(5)
file when NFSv4 mounts are enabled.
To avoid this message being generated erroneously, /etc/rc.d/mountd
is updated to make sure vfs.nfsd.server_max_nfsvers is properly set
before mountd(8) is started.
Reported by: debdrup
PR: 253901
MFC after: 2 weeks
The save/restore feature uses a unix domain socket to send messages
from bhyvectl(8) to a bhyve(8) process. A datagram socket will suffice
for this.
An added benefit of using a datagram socket is simplified code. For
bhyve, the listen/accept calls are dropped; and for bhyvectl, the
connect() call is dropped.
EPRINTLN handles raw mode for bhyve(8), use it to print error messages.
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D28983
Use errno to print a more descriptive error message when vm_open() fails
libvmm: preserve errno when vm_device_open() fails
vm_destroy() squashes errno by making a dive into sysctlbyname() - we
can safely skip vm_destroy() here since it's not doing any critical
clean up at this point. Replace vm_destroy() with a free() call.
PR: 250671
MFC after: 3 days
Submitted by: marko@apache.org
Reviewed by: grehan
Differential Revision: https://reviews.freebsd.org/D29109
Instead of whether /boot/efi exists, which it now always does, including
on systems that don't and can't use EFI, use whether /boot/efi is
present in fstab to signal to the installer that it is a valid ESP and
should be configured. This has essentially the same semantics, but allows
/boot/efi to be created unconditionally.
Reviewed by: bdragon, imp
Tested by: bdragon (ppc64)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D29068
Recent changes have made it such that attaching to a jail will augment
the attaching process' cpu mask with the jail's cpuset. While this is
convenient for allowing the administrator to cpuset arbitrary programs
that will attach to a jail, this is decidedly not convenient for
executing long-running daemons during jail creation.
This change inserts a reset of the process cpuset to the root cpuset
between the fork and attach to execute a command. This allows commands
executed to have the widest mask possible, and the administrator can
cpuset(1) it back down inside the jail as needed.
With this applied, one should be able to change a jail's cpuset at
exec.poststart in addition to exec.created. The former was made
difficult if jail(8) itself was running with a constrained set, as then
some processes may have been spawned inside the jail with a non-root
set. The latter is the preferred option so that processes starting in
the jail are constrained appropriately up front.
Note that all system commands are still run with the process' initial
cpuset applied.
PR: 253724
MFC after: 3 days
Reviewed by: jamie
Differential Revision: https://reviews.freebsd.org/D29008
On system crontabs, multiple blanks are not being consumed after reading the
username. This change adds blank consumption before parsing any -[qn] options.
Without this change, an entry like:
* * * * * username -n true # Two spaces between username and option.
will fail, as the shell will try to execute (' -n true'), while an entry like:
* * * * * username -n true # One space between username and option.
works as expected (executes 'true').
For user crontabs, this is not an issue as the preceding (day of week
or @shortcut) processing consumes any leading whitespace.
PR: 253699
Submitted by: Eric A. Borisch <eborisch@gmail.com>
MFC after: 1 week
init(8) sets the "daemon" login class without specifying a pw
entry (so no substitutions are done on the variables). service(8)'s
use of env -L had the effect of specifying root's pw entry, with two
effects: getpwnam and getpwuid are being called, which may not be
entirely safe depending on what nsswitch is up to and what stage of
boot we are at, and substitutions would have been done.
Fix by teaching env(8) to allow -L -/classname to set the class
environment with no pw entry at all specified, and use it in
service(8).
PR: 253959
Ranges use the function get_number, which means that ranges of names
are supported and indeed always have been, righ back to the initial
import.
PR: docs/253969
Reported by: Ben Bullock <benkasminbullock@gmail.com>
Set the filter-specific flags VQ_MOUNT and VQ_UNMOUNT for the
EVFILT_FS filter.
The filter-specific flags for the EVFILT_FS filter are undocumented, but
their usage can be found by looking up vfs_event_signal().
Reviewed by: trasz
Differential Revision: https://reviews.freebsd.org/D28975
fmtree(8) deprecation was announced on February 12, 2021, and no longer
built by default as of that date. The deprecation notice was merged
back to stable/12 and stable/13 + releng/13.0.
Continue with the plan by finishing the removal.
Relnotes: yes
In the 761d2bb5b9 we added nojailvnet
keyword. The nojailvnet keyword is used to skip startup scripts in
jails that are run without VNET.
The service.sh was omitted in this commit. The service.sh
even documents that this is the same code as in rc - so lets reflect
that.
Submitted by: Adam Wołk <a.wolk@fudosecurity.com>
Sponsored by: Fudo Security
Based on an idea from dvl's coworker, László DANIELISZ, implement
a new flag, 'E', that prevents newsyslog(8) from rotating the empty
log files. This 'E' flag ist mostly usable in conjunction with 'B'
flag that instructs newsyslog(8) to not insert an informational
message into the log file after rotation, keeping it still empty.
Reviewed by: markj, ian, manpages (rpokala)
Approved by: markj, ian, manpages (rpokala)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D28940
MAX_SNAPSHOT_VMNAME is a macro used to set the size of a character
buffer that stores a filename or the path to a file - this file is used
by the save/restore feature.
Since the file doesn't have anything to do with a vm name, rename
MAX_SNAPSHOT_VMNAME to MAX_SNAPSHOT_FILENAME. Bump the size to PATH_MAX
while here.
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D28879
Combine send_start_checkpoint() and send_start_suspend() into a
single function named snapshot_request().
snapshot_request() is equivalent to send_start_checkpoint() and
send_start_suspend() except that it takes an additional argument. The
additional argument, enum ipc_opcode, is used to determine the type of
snapshot request being performed. Also, switch to using strlcpy instead
of strncpy.
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D28878
Generalize the naming here since the domain socket that uses these codes
might be used for purposes other than the save/restore feature.
- rename checkpoint_opcodes to ipc_opcode
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D28877
The manual page lists a bunch of examples, some of which already exist
in this file. Since it's both easier to remember when all examples are
listed in the same location, move examples so they get installed into
/etc/inetd.conf
This also means users won't have to copy-paste, but can simply
uncomment one or more services to use them.
As such, it also becomes necessary to remove the examples from the
manual page, so instead add a note explaining where the previous
examples as well as others may be found.
Cross-references, including to ports, have also been added where
applicable.
The rsync example has lived in the bug tracker for too long,
considering how useful it can situationally be, for example when
backup jobs on client devices are run through periodic(8) weekly.
The microsoft-ds entry is necessary for Windows 10 compatibility
(this can be confirmed with packet capturing, as it is not readily
documented at time of writing).
While here, remove two examples for which compatible daemons could not
be found in ports.
Submitted by: David Yeske <dyeske at gmail.com> (in part, prev ver)
PR: 122037
Reviewed by: kevans, brueffer, lwhsu, yuripv
Differential Revision: https://reviews.freebsd.org/D28882
Per hier(7), the ESP will be mounted at /boot/efi. On UFS systems,
any existing ESP will be reused and mounted there; otherwise, a new one
will be made. On ZFS systems, space for an ESP is allocated on all disks
in the root pool, but only the partition actually used to boot is set up
and mounted.
This makes future upgrades of the EFI loader easier (upgrade scripts can
just change /boot/efi) and also greatly simplifies the parts of the
installer involved in initialization of the ESP. It also makes the
installer's behavior correspond to the documentation in hier(7).
Reviewed by: imp, tsoome
MFC after: 1 week
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D28897
Add /var/run/bhyve/ to BSD.var.dist so we don't have to call mkdir when
creating the unix domain socket for a given bhyve vm.
The path to the unix domain socket for a bhyve vm will now be
/var/run/bhyve/vmname instead of /var/run/bhyve/checkpoint/vmname
Move BHYVE_RUN_DIR from snapshot.c to snapshot.h so it can be shared
to bhyvectl(8).
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D28783
The makefs msdosfs code includes fs/msdosfs/denode.h which directly uses
struct buf from <sys/buf.h> rather than the makefs struct m_buf.
To work around this problem provide a local denode.h that includes
ffs/buf.h and defines buf as an alias for m_buf.
Reviewed By: kib, emaste
Differential Revision: https://reviews.freebsd.org/D28835
Make sys/buf.h, sys/pipe.h, sys/fs/devfs/devfs*.h headers usable in
userspace, assuming that the consumer has an idea what it is for.
Unhide more material from sys/mount.h and sys/ufs/ufs/inode.h,
sys/ufs/ufs/ufsmount.h for consumption of userspace tools, with the
same caveat.
Remove unacceptable hack from usr.sbin/makefs which relied on sys/buf.h
being unusable in userspace, where it override struct buf with its own
definition. Instead, provide struct m_buf and struct m_vnode and adapt
code to use local variants.
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D28679
Changes in the 2fe5a79425 moved dst sockaddr masking from the
routing control plane to the rtsock code.
It broke arp/ndp deletion.
It turns out, arp/ndp perform RTM_GET request first to get an
interface index necessary for the deletion.
Then they simply stamp the reply with RTF_LLDATA and set the
command to RTM_DELETE.
As a result, kernel receives request with non-empty RTA_NETMASK
and clears RTA_DST host bits before passing the message to the
lla code.
De facto, the only needed bits are RTA_DST, RTA_GATEWAY and the
subset of rtm_flags.
With that in mind, fix the interace by clearing RTA_NETMASK
for every messages with RTF_LLDATA.
While here, cleanup arp/ndp code a bit.
MFC after: 1 day
Reviewed by: gnn
Differential Revision: https://reviews.freebsd.org/D28804
The kernel changes needed for nfs-over-tls have been committed to main.
However, nfs-over-tls requires user space daemons to handle the
TLS handshake and other non-application data TLS records.
There is one daemon (rpc.tlsclntd) for the client side and one daemon
(rpc.tlsservd) for the server side, although they share a fair amount
of code found in rpc.tlscommon.c and rpc.tlscommon.h.
They use a KTLS enabled OpenSSL to perform the actual work and, as such,
are only built when MK_OPENSSL_KTLS is set.
Communication with the kernel is done via upcall RPCs done on AF_LOCAL
sockets and the custom system call rpctls_syscall.
Reviewed by: gbe (man pages only), jhb (usr.sbin/Makefile only)
Comments by: jhb
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D28430
Relnotes: yes
struct checkpoint_op, enum checkpoint_opcodes, and
MAX_SNAPSHOT_VMNAME are not vmm specific, move them out of the vmmapi
header.
They are used for the save/restore functionality that bhyve(8)
provides and are better suited in usr.sbin/bhyve/snapshot.h
Since bhyvectl(8) requires these, the Makefile for bhyvectl has been
modified to include usr.sbin/bhyve/snapshot.h
Reviewed by: kevans, grehan
Differential Revision: https://reviews.freebsd.org/D28410
When executing automount(8), it will attempt to create the directory where an
autofs filesystem is to be mounted. Explicity set the root path for this
directory to "/".
This fixes the issue where the directory being created was being treated as a
relative path instead of an absolute path (as expected).
PR: 224601
Reported by: kusumi.tomohiro@gmail.com
Reviewed by: trasz
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27832
Note that this mtree(8) is actually installed as fmtree(8), while
mtree(8) is located in ^/contrib/mtree -- thus, the reference to
mtree(8) makes a lot more sense in the context in which folks would
actually notice it. Shout-out to Ravi for pointing out that this may
not be an obvious fact.
MFC after: 3 days
Reviewed by: bdrewery, brooks, cy, emaste
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D28573
unsz was always exactly '1' here due to an unfortunate mispositioning
of closing parenthesis. While it's generally irrelevant because bind(2)
is passed the (accurate) sep->se_ctrladdr_size instead, it's not very
helpful for anything locally that wants to use it rather than assuming
that sep->se_ctrladdr_size perfectly fits the end of sun_path.
Just drop unsz entirely and use the result of SUN_LEN() for it.
MFC-after: 3 days
- One (1) spurious whitespace.
- One (1) occurrence of "random(3) bad, arc4random(3)" good.
- Three (3) writes that will never be seen.
The latter two points are complaints from clang-analyze. Switching to
arc4random(3) is decidedly a good idea because we weren't doing any kind
of PRNG seeding anyways. The discarded assignments are arguably good
for future-proofing, but it's better to improve the S/N ratio from
clang-analyze.
Reviewed by: bapt, manu
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28525
This is limited to bootstrap/add because some real pkg(8) commands
have -r flags with an incompatible meaning/usage, e.g., pkg-audit.
pkg(7) will still commence the search as it has, but it will ignore any
repo objects without the given name so that overrides and whatnot still
work as expected.
The use of it for add is noted in the manpage; notably, that the
signature config for that repository will be used over global config if
it's specified. i.e., pkg(7) should assume that the given pkg did come
from that repository and treat it appropriately.
Reviewed by: bapt, manu
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28524
Move the check for efi variables being supported to after parsing the args. This
allows '-h' to produce both as a normal user as well as on all systems.
The st variable is used as a shortcut for &node->inode->st, but in one
branch just before the exit we update node->inode without changing st.
Reported by: AddressSanitizer
Reviewed By: emaste
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28570
These tests create jails with the same name, so they cannot be run in
parallel.
Reviewed By: lwhsu
Differential Revision: https://reviews.freebsd.org/D28482
Commit 5619d49e07 made the getgrgid() call inside bsm work as
intended so we now print "wheel" instead of a numeric 0 in the rgid field.
Reviewed By: markj
Differential Revision: https://reviews.freebsd.org/D28462
The file already includes sys/param.h and should use that definition.
I found this while testing D28332.
Reviewed By: bapt
Differential Revision: https://reviews.freebsd.org/D28331
Make the installer more useful, by allowing it to create a bootable
installation. Also, enable the menu option for ZFS-on-root.
Like arm64, RISC-V boots by UEFI only, so arm64's partedit
implementation is renamed and shared among the two platforms.
Reviewed by: gjb
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D28180
If the installer is creating a new ESP, then this directory will not
exist and the subsequent cp will fail silently. This is usually of no
consequence if /efi/freebsd/loader.efi is set up correctly.
Reviewed by: imp
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D28176
nids(4) was a clever idea in the early 2000's when the market was
flooded with 10/100 NICs with Windows-only drivers, but that hasn't been
the case for ages and the driver has had no meaningful maintenance in
ages. It only supports Windows-XP era drivers.
Also remove:
- ndis support from wpa_supplicant
- ndiscvt(8)
Reviewed By: emaste, bcr (manpages)
Differential Revision: https://reviews.freebsd.org/D27609
WITHOUT_LIBTHR has been broken for a little over five years now, since the
xz 5.2.0 update introduced a hard liblzma dependency on libthr, and building
a useful system without threading support is becoming increasingly more
difficult.
Additionally, in the five plus years that it's been broken more reverse
dependencies have cropped up in libzstd, libsqlite3, and libcrypto (among
others) that make it more and more difficult to reconcile the effort needed
to fix these options.
Remove the broken options.
PR: 252760
Reviewed by: brooks, emaste, kib
Differential Revision: https://reviews.freebsd.org/D28263
MK_PMC is already guarded by MK_CXX in src.opts.mk, so we can actually
merge it with the following SUBDIR statement after c1a3d7f206.
Suggested By: jrtc27
In the presence of high-level errors (spec violations, bad boot blocks
checksum), report non-detection instead of detection.
PR: 252787 (related, but does not fully address)
.Dl indents literal display text for one line, but .Bd can do it for a
whole subsection.
Pointy hat to: debdrup
Reported by: 0mp
Reviewed by: 0mp
Differential Revision: https://reviews.freebsd.org/D28198
service(8) has an example for bash completion, however bash is third
party and in /usr/share/examples/csh/dot.cshrc is a working example for
csh.
Since I use (t)csh, I've tested it, and it works for me.
PR: 179497
Submitted by: ohauer@
Reviewed by: kp (tentatively)
Differential Revision: https://reviews.freebsd.org/D28197
is enabled.
This builds wpa_supplicant / hostpad using internal encryption routines
rather than using libcrypt.
This has been supported in wpa for years now, however since we use
local makefiles for this, we bitrotted dependencies and configuration
options.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D27958
Currently default behaviour is to keep only 1 packet per unresolved entry.
Ability to queue more than one packet was added 10 years ago, in r215207,
though the default value was kep intact.
Things have changed since that time. Systems tend to initiate multiple
connections at once for a variety of reasons.
For example, recent kern/252278 bug report describe happy-eyeball DNS
behaviour sending multiple requests to the DNS server.
The primary driver for upper value for the queue length determination is
memory consumption. Remote actors should not be able to easily exhaust
local memory by sending packets to unresolved arp/ND entries.
For now, bump value to 16 packets, to match Darwin implementation.
The proper approach would be to switch the limit to calculate memory
consumption instead of packet count and limit based on memory.
We should MFC this with a variation of D22447.
Reviewers: #manpages, #network, bz, emaste
Reviewed By: emaste, gbe(doc), jilles(doc)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D28068
create_blacklisted() will identify a cert whether it's provided a path to
a cert or the hash.serial format that is shown by `certctl list`.
Factor this logic out into a resolve_certname() so that it may be reused
elsewhere.
Use the new user.localbase sysctl here as well, to reduce the number of
hardcoded localbase by one (1).
MFC after: 3 days (note: just use a literal /usr/local default)
pccard is being removed, so remove bt3c driver since it only has PC
Card attachment. Also remove bt3cfw(8) since it's the firmware for this
driver.
Relnotes: Yes
As suggested in D27598. This also supports MK_WERROR.clang=no and
MK_WERROR.gcc=no to support the existing NO_WERROR.<compiler> uses.
Reviewed By: brooks
Differential Revision: https://reviews.freebsd.org/D27601
Rework the arguments handling around using getopt_long:
* add long option support
* add -4 and -6 support to enforce ipv4 or ipv6
While here fix a regression which occured between FreeBSD 12.1 and
FreeBSD 12.2 where pkg bootstrap -y stopped working
PR: 252270
MFC after: 2 weeks
Submitted by: evilham <contact@evilham.com>
Differential Revision: https://reviews.freebsd.org/D27860
ppp uses libalias modules which now belong in the natd package.
Avoid bringing a dependancy on natd for the utilities package.
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D27711
- Increase WARNS to 6.
- Except -Wcast-align and -Wincompatible-pointer-types-discards-qualifiers
checks.
- Use ANSI C prototype.
- Statically variables and functions.
- Add extern declaration for global variables.
- Rename local variables to resolve shadow warnings.
PR: 71667
MFC after: 2 weeks
CouchDB was mistakenly removed in r368712
amqps is used by net/rabbitmp
Both are registered in IANA
Reported by: dch
Differential Revision: https://reviews.freebsd.org/D27691
This shows up when compiling valectl on a 32 bit platform like i386 and mips32.
gcc-6.4 complains about this (-Wint-to-pointer-cast).
Reviewed by: vmaffione
Differential Revision: https://reviews.freebsd.org/D27814
Since gpart_devs was not quoted (losing embedded newlines), if
daily_backup_gpart_exclude matched something, gpart_devs was empty.
PR: 251961
Submitted by: Kan Sasaki
MFC after: 1 week
Now that bhyve(8) supports UART, bvmconsole and bvmdebug are no longer needed.
This also removes the '-b' and '-g' flag from bhyve(8). These two flags were
marked deprecated in r368519.
Reviewed by: grehan, kevans
Approved by: kevans (mentor)
Differential Revision: https://reviews.freebsd.org/D27490
- Add missing quotation mark for a comment above the .Dd
- inserting missing end of block: Sh breaks Bd
- skipping paragraph macro: Pp before Bl
- skipping paragraph macro: Pp before Bd
- empty block: Bd
MFC after: 1 week
- new sentence, new line
- sections out of conventional order: Sh FILES
- unusual Xr order: bthost(1) after bthidd(8)
- no blank before trailing delimiter
- whitespace at end of input line
- sections out of conventional order: Sh EXIT STATUS
MFC after: 1 week
- support VNC version 3.3 (macos "Screen Sharing" builtin client)
- wait until client has requested an update prior to sending framebuffer data
- don't send an update if no framebuffer updates detected
- increase framebuffer poll frequency to 30Hz, and double that when
kbd/mouse input detected
- zero uninitialized array elements in rfb_send_server_init_msg()
- fix overly large allocation in rfb_init()
- use atomics for flags shared between input and output threads
- use #defines for constants
This work was contributed by Marko Kiiskila, with reuse of some earlier
work by Henrik Gulbrandsen.
Clients tested :
FreeBSD-current
- tightvnc
- tigervnc
- krdc
- vinagre
Linux (Ubuntu)
- krdc
- vinagre
- tigervnc
- xtightvncviewer
- remmina
MacOS
- VNC Viewer
- TigerVNC
- Screen Sharing (builtin client)
Windows 10
- Tiger VNC
- VNC Viewer (cursor lag)
- UltraVNC (cursor lag)
o/s independent
- noVNC (browser) using websockify relay
PR: 250795
Submitted by: Marko Kiiskila <marko@apache.org>
Reviewed by: jhb (bhyve)
MFC after: 3 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D27605
Enforce the requirement that the RX callback cannot be called after a reset until the features have been negotiated.
This fixes a race condition where the receive callback is called during a device reset.
Reviewed by: vmaffione, grehan
Approved by: vmaffione (mentor)
Sponsored by: vstack.com
Differential Revision: https://reviews.freebsd.org/D27381
Now that sparc64 has been removed, there are no kernels built with
support for the VTOC8 partitioning scheme by default. Remove the option
from the installer, as it is unsupported on all installer images
produced by re@.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D27641
The existing logic is nice in theory, but in practice freebsd-update will
not preserve the timestamps on these files. When doing a major upgrade, e.g.
from 12.1-RELEASE -> 12.2-RELEASE, pwd.mkdb et al. appear in the INDEX and
we clobber the timestamp several times in the process of packaging up the
existing system into /var/db/freebsd-update/files and extracting for
comparisons. This leads to these files not getting regenerated when they're
most likely to be needed.
Measures could be taken to preserve timestamps, but it's unclear whether
the complexity and overhead of doing so is really outweighed by the marginal
benefit.
I observed this issue when pkg subsequently failed to install a package that
wanted to add a user, claiming that the user was removed in the process.
bapt@ pointed to this pre-existing bug with freebsd-update as the cause.
PR: 234014, 232921
Reviewed by: bapt, emaste
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27635
This is the final half of splitting r358153 in two, in order to avoid a build
system bugs and being able to merge an earlier change to previous releases.
Add a note to UPDATING to avoid people building from very old systems from
having issues with mergemaster
MFC after: 3 days (only 12-stable)
Differential Revision: https://reviews.freebsd.org/D23621
This is an import of the Google Summer of Code 2018 project completed by
Christian Kramer (and, sadly, ignored by us for two years now). The goals
stated for that project were:
FreeBSD already has support for interrupts implemented in the GPIO
controller drivers of several SoCs, but there are no interfaces to take
advantage of them out of user space yet. The goal of this work is to
implement such an interface by providing descriptors which integrate
with the common I/O system calls and multiplexing mechanisms.
The initial imported code supports the following functionality:
- A kernel driver that provides an interface to the user space; the
existing gpioc(4) driver was enhanced with this functionality.
- Implement support for the most common I/O system calls / multiplexing
mechanisms:
- read() Places the pin number on which the interrupt occurred in the
buffer. Blocking and non-blocking behaviour supported.
- poll()/select()
- kqueue()
- signal driven I/O. Posting SIGIO when the O_ASYNC was set.
- Many-to-many relationship between pins and file descriptors.
- A file descriptor can monitor several GPIO pins.
- A GPIO pin can be monitored by multiple file descriptors.
- Integration with gpioctl and libgpio.
I added some fixes (mostly to locking) and feature enhancements on top of
the original gsoc code. The feature ehancements allow the user to choose
between detailed and summary event reporting. Detailed reporting provides
a record describing each pin change event. Summary reporting provides the
time of the first and last change of each pin, and a count of how many times
it changed state since the last read(2) call. Another enhancement allows
the recording of multiple state change events on multiple pins between each
call to read(2) (the original code would track only a single event at a time).
The phabricator review for these changes timed out without approval, but I
cite it below anyway, because the review contains a series of diffs that
show how I evolved the code from its original state in Christian's github
repo for the gsoc project to what is being commited here. (In effect,
the phab review extends the VC history back to the original code.)
Submitted by: Christian Kramer
Obtained from: https://github.com/ckraemer/freebsd/tree/gsoc2018
Differential Revision: https://reviews.freebsd.org/D27398
