already supported nested PICs, but was limited to having a nested
AT-PIC only. With G5 support the need for nested OpenPIC controllers
needed to be added. This was done the wrong way and broke the MPC8555
eval system in the process.
OFW, as well as FDT, describe the interrupt routing in terms of a
controller and an interrupt pin on it. This needs to be mapped to a
flat and global resource: the IRQ. The IRQ is the same as the PCI
intline and as such needs to be representable in 8 bits. Secondly,
ISA support pretty much dictates that IRQ 0-15 should be reserved
for ISA interrupts, because of the internal workins of south bridges.
Both were broken.
This change reverts revision 209298 for a big part and re-implements
it simpler. In particular:
o The id() method of the PIC I/F is removed again. It's not needed.
o The openpic_attach() function has been changed to take the OFW
or FDT phandle of the controller as a second argument. All bus
attachments that previously used openpic_attach() as the attach
method of the device I/F now implement as bus-specific method
and pass the phandle_t to the renamed openpic_attach().
o Change powerpc_register_pic() to take a few more arguments. In
particular:
- Pass the number of IPIs specificly. The number of IRQs carved
out for a PIC is the sum of the number of int. pins and IPIs.
- Pass a flag indicating whether the PIC is an AT-PIC or not.
This tells the interrupt framework whether to assign IRQ 0-15
or some other range.
o Until we implement proper multi-pass bus enumeration, we have to
handle the case where we need to map from PIC+pin to IRQ *before*
the PIC gets registered. This is done in a similar way as before,
but rather than carving out 256 IRQs per PIC, we carve out 128
IRQs (124 pins + 4 IPIs). This is supposed to handle the G5 case,
but should really be fixed properly using multiple passes.
o Have the interrupt framework set root_pic in most cases and not
put that burden in PIC drivers (for the most part).
o Remove powerpc_ign_lookup() and replace it with powerpc_get_irq().
Remove IGN_SHIFT, INTR_INTLINE and INTR_IGN.
Related to the above, fix the Freescale PCI controller driver, broken
by the FDT code. Besides not attaching properly, bus numbers were
assigned improperly and enumeration was broken in general. This
prevented the AT PIC from being discovered and interrupt routing to
work properly. Consequently, the ata(4) controller stopped functioning.
Fix the driver, and FDT PCI support, enough to get the MPC8555CDS
going again. The FDT PCI code needs a whole lot more work.
No breakages are expected, but lackiong G5 hardware, it's possible
that there are unpleasant side-effects. At least MPC85xx support is
back to where it was 7 months ago -- it's amazing how badly support
can be broken in just 7 months...
Sponsored by: Juniper Networks
1) ECN was on an association basis, this is incorrect and
will not work with CMT or for that matter if the user
is sending to multiple addresses. This commit makes
ECN on a per path basis.
2) Adopt the new format for the ECN internet draft. This also
maintains compatability with old format chunks as well.
3) Keep track of the real time of a RTT down to micro seconds.
For some future conditional features (for like a data center
this is good information to have).
MFC after: 1 month
MAP_STACK_* entries. (See r71983 and r74235.)
In some cases, performing this call to vm_map_simplify_entry() halves the
number of vm map entries used by the Sun JDK.
Each different radio chipset has a different "good" range of CCA
(clear channel access) parameters where, if you write something
out of range, it's possible the radio will go deaf.
Also, since apparently occasionally reading the NF calibration
returns "wrong" values, so enforce those limits on what is being
written into the CCA register.
Write a default value if there's no history available.
This isn't the case right now but it may be later on when "off-channel"
scanning occurs without init'ing or changing the NF history buffer.
(As each channel may have a different noise floor; so scanning or
other off-channel activity shouldn't affect the NF history of
the current channel.)
* I messed up a couple of things in if_athvar.h; so fix that.
* Undo some guesswork done in ar5416Set11nRateScenario() and introduce a
flags parameter which lets the caller set a few things. To begin with,
this includes whether to do RTS or CTS protection.
* If both RTS and CTS is set, only do RTS. Both RTS and CTS shouldn't be
set on a frame.
There's two reasons for this:
* the raw and non-raw TX path shares a lot of duplicate code which should be
refactored;
* the 11n-ready chip TX path needs a little reworking.
receive processing.
Remove unnecessary restrictions on the mbuf chain length built during an
LRO receive. This restriction was copied from the Linux netfront driver
where the LRO implementation cannot handle more than 18 discontinuities.
The FreeBSD implementation has no such restriction.
MFC after: 1 week
Place elements on DAG lists in breadth-first order. This allows us to
walk pre-built list in all cases where breadth-first dependency chain
enumeration is required.
Fix dlsym on special handle obtained by dlopen(NULL, ...) to do what
comment claims it does. Take advantage of recently added symlook_global
function to iterate over main objects and global DAGs lists properly in
search of a symbol. Since rtld itself provides part of the global
namespace, search rtld_obj too.
Remove recursion from init_dag and symlook_needed functions. Use
symlook_needed for ELF filtee processing only and change lookup order
used in the function to match the order used by Solaris runtime linker
under same circumstances. While there, fix weak symbol handling in the
loop so that we return the first weak symbol definition if no strong one
was found, instead of the last one.
Reviewed by: kib
MFC after: 1 month
Accepting connections and handshaking in secondary is still done before
dropping privileges. It should be implemented by only accepting connections in
privileged main process and passing connection descriptors to the worker, but
is not implemented yet.
MFC after: 1 week
- chrooting to /var/empty (user hast home directory),
- setting groups to 'hast' (user hast primary group),
- setting real group id, effective group id and saved group id to 'hast',
- setting real user id, effective user id and saved user id to 'hast'.
At the end verify that those operations where successfull.
MFC after: 1 week
we expect to be open. Also assert that they point at expected type.
Because openlog(3) API is unable to tell us descriptor number it is using, we
have to close syslog socket, remember assert message in local buffer and if we
fail on assertion, reopen syslog socket and log the message.
MFC after: 1 week
This will be used for Data Center congestion
control, we won't want to engage it in the
ECN code unless we KNOW that the RTT is less
than 500us.
MFC after: 1 week
sends were being accounted for. The
counting was such that we counted only
when we queued a chunk, not when we sent it.
Now keep an additional counter for queuing and
one for sending.
MFC after: 1 week
be used by linuxolator itself.
Move linux_wait4() to MD path as it requires native struct
rusage translation to struct l_rusage on linux32/amd64.
MFC after: 1 Month.
each of the threads needs more while current pool of the buffers is
exhausted, then neither thread can make progress.
Switch to nowait allocations after we got first buffer already.
Reported by: az
Reviewed by: alc (previous version)
Tested by: pho
MFC after: 1 week
The fdcheckstd() function makes sure fds 0, 1 and 2 are open by opening
/dev/null. If this fails (e.g. missing devfs or wrong permissions),
fdcheckstd() will return failure and the process will exit as if it received
SIGABRT. The KASSERT is only to check that kern_open() returns the expected
fd, given that it succeeded.
Tripping the KASSERT is most likely if fd 0 is open but fd 1 or 2 are not.
MFC after: 2 weeks
EBR schemes: fat32, ebr, linux-data, linux-raid, linux-swap and
linux-lvm. Add bios-boot GUID and alias for the GPT scheme. It used by
GRUB 2 loader. Also do sorting definitions of types in diskmbr.h
and in g_part.c.
PR: bin/120990, kern/147664
MFC after: 2 weeks
This is just the bare minimum needed to teach ath_rate_sample to try
and handle MCS rates. It doesn't at all attempt to find the best
rate by any means - it doesn't know anything about the MCS rate
relations, TX aggregation or any of the much sexier 11n stuff
that's out there.
It's just enough to transmit 11n frames and handle TX completion.
It shouldn't affect legacy (11abg) behaviour.
Obtained from: rpaulo@
This will eventually be used by rate control modules and by the TX
code for calculating packet duration when handling rts/cts protection.
Obtained from: sam@, rpaulo@, linux ath9k
- Remove reference to sprintf. Use printf directly. This part of
the code should be optimised further to avoid many small printouts.
Setting a sensible line buffer length could help aswell when printing
out megabytes of data per second.
Approved by: thompsa (mentor)
members, thus making a signed extension of 32 bit register
context. If the register is not touched in usermode between
return from signal and next syscall entry, the sign-extension
part of 64bit register is not cleared, causing
linux32_fetch_syscall_args() to read wrong values.
Use unsigned type for the registers in the linux sigcontext.
Reported by: Jacob Frelinger <jacob.frelinger duke edu>, arundel
In collaboration with: dchagin
MFC after: 1 week
