1. Rewrite the backward scan. Specifically, reverse the order in which
pages are allocated so that upon failure it is never necessary to
free pages that were just allocated. Moreover, any allocated pages
can be put to use. This makes the backward scan behave just like the
forward scan.
2. Eliminate an explicit, unsynchronized check for low memory before
calling vm_page_alloc(). It serves no useful purpose. It is, in
effect, optimizing the uncommon case at the expense of the common
case.
Approved by: re (hrs)
MFC after: 3 weeks
interrupt that is shared with other devices(e.g. USB) in system and
provide a new tunable "hw.msk.legacy_intr" to activate the legacy
interrupt handler. Setting the tunable automatically disables MSI
for msk(4). Previously msk(4) used adoptive polling with taskqueue(9)
as all msk(4) hardwares I know supports MSI. However, there are cases
that MSI couldn't be used on some hardwares due to bugs in MSI
implementatins.
Tested by: Li-Lun Wang < llwang AT infor DOT org >
Approved by: re (kensmith)
UDPv4 features to UDPv6:
- Add MAC checks on delivery and MAC labeling on transmit.
- Check for (and reject) datagrams with destination port 0.
- For multicast delivery, check the source port only if the socket being
considered as a destination has been connected.
- Implement UDP blackholing based on net.inet.udp.blackhole.
- Add a new ICMPv6 unreachable reply rate limiting category for failed
delivery attempts and implement rate limiting for UDPv6 (submitted by
bz).
Approved by: re (kensmith)
Reviewed by: bz
machines.
- Leave the long-term load balancer running by default once per second.
- Enable stealing load from the idle thread only when the remote processor
has more than two transferable tasks. Setting this to one further
improves buildworld. Setting it higher improves mysql.
- Remove the bogus pick_zero option. I had not intended to commit this.
- Entirely disallow migration for threads with SRQ_YIELDING set. This
balances out the extra migration allowed for with the load balancers.
It also makes pick_pri perform better as I had anticipated.
Tested by: Dmitry Morozovsky <marck@rinet.ru>
Approved by: re
properly. We have to temporarily unlock the TDQ lock so we can lock
the thread and add it to the run queue. This is used only for KSE.
- When we add a thread from the tdq_move() via sched_balance() we need to
ipi the target if it's sitting in the idle thread or it'll never run.
Reported by: Rene Landan
Approved by: re
- Add custom .c wrappers for the firmware, rather than the standard
firmware(9) generated firmware objects to work around toolchain
problems on ia64 involving linking objects produced by
ld -b -binary into the kernel.
- Move from using Myricom's ".dat" firmware blobs to using Myricom's
zlib compressed ".h" firmware header files. This is done to
facilitate the custom wrappers, and saves a fair amount of wired
memory in the case where the firmware is built in, or preloaded.
- Fix two compile issues in mxge which only appear on non-i386/amd64.
Reviewed by: mlaier, mav (earlier version with just zlib support)
Glanced at by: sam
Approved by: re (kensmith)
IPV6_IPSEC_POLICY always visible again. This unbreaks some
third party user space applications.
PR: 114491
Reported by: sumikawa
Reviewed by: sumikawa
Approved by: re (hrs)
should finally fix fsx test case.
The printf's added here would be eventually turned into
assertions.
Submitted by: Mingyan Guo (mostly)
Approved by: re (tmpfs blanket)
new code and third party modules which try to depend on it.
- Initialize sched_lock in sched_4bsd.c.
- Declare sched_lock in sparc64 pmap.c and assert that we're compiling
with SCHED_4BSD to prevent accidental crashes from running ULE. This
is the sole remaining file outside of the scheduler that uses the
global sched_lock.
Approved by: re
been in development for over 6 months as SCHED_SMP.
- Implement one spin lock per thread-queue. Threads assigned to a
run-queue point to this lock via td_lock.
- Improve the facility for assigning threads to CPUs now that sched_lock
contention no longer dominates scheduling decisions on larger SMP
machines.
- Re-write idle time stealing in an attempt to make it less damaging to
general performance. This is still disabled by default. See
kern.sched.steal_idle.
- Call the long-term load balancer from a callout rather than sched_clock()
so there are no locks held. This is disabled by default. See
kern.sched.balance.
- Parameterize many scheduling decisions via sysctls. Try to document
these via sysctl descriptions.
- General structural and naming cleanups.
- Document each function with comments.
Tested by: current@ amd64, x86, UP, SMP.
Approved by: re
require fewer blocking loops.
- Don't use atomic ops with 4BSD or on UP.
- Only use the blocking loop if ULE is compiled in.
- Use the correct memory barrier.
Discussed with: attilio, jhb, ssouhlal
Tested by: current@
Approved by: re
- use proper tick gathering macro instead of ticks directly.
- Placed reasonable boundaries on sets that a user can do
that are converted to ticks from ms.
- Fix CMT_PF to always check to be sure CMT is on.
- Fix ticks use of CMT_PF.
- put back code to allow asconfs to be queued while INITs are in flight
and before the assoc is established.
- During window probes, an ack'd packet might be left with the window
probe mark on it causing it to be retransmitted. Change so that
the flight decrease macro clears the window_probe mark.
- Additional logging flight size/reading and ASOC LOG. This
is only enabled if you manually insert things into opt_sctp.h
since its a set of debug code only.
- Found an interesting SMP race in the way data was appended which
could cause a reader to lose a part of a message, had to
reorder when we marked the message was complete to after
the data was appended.
- bug in ADD-IP for the subset bound socket case when the peer has only
one address
- fix ASCONF implicit success/error handling case
- proper support of jails in Freebsd 6>
- copy out the timeval for the 64 bit sparc world on cookie-echo
alignment error crashes without this).
Approved by: re(Ken Smith)
config info. from device.hints. Some machines have ipmi controllers
that do not have attachment info in either PCI, SMBIOS or ACPI.
This idea was hacked together by me and then done properly by
jhb.
Submitted by: jhb
Reviewed by: jhb (man page)
Approved by: re (Ken Smith)
MFC after: 1 week
The SDM states that writing to ar.bspstore invalidates the ar.rnat
register as a side-effect. This was interpreted as "bits in the
ar.rnat register that correspond to registers whose value is on
the stack are undefined'. Since we keep the kernel stack NaT-
aligned with the user stack (i.e. the lower 9 bits of the backing
store pointer remain unchanged when we switch to the kernel stack)
bits that need preserving would be preserved.
That interpretation is questionable. So, now, the interpretation
is more absolute: ar.rnat is undefined after writing to ar.bspstore.
As such, we write the saved value of ar.rnat back to ar.rnat after
writing to ar.bspstore.
Discussed with: christian.kandeler@hob.de
Approved by: re (kensmith)
- Keep last transaction label for each destination.
- If the next label is not free, just give up.
- This should reduce CPU load for TX on if_fwip under heavy load.
Approved by: re (hrs)
NET_NEEDS_GIANT, which will shortly be removed. This is done in a
away that it may be easily reattached to the build before 7.1 if
appropriate locking is added. Specifics:
- Don't install netatm include files
- Disconnect netatm command line management tools
- Don't build libatm
- Don't include ATM parts in rescue or sysinstall
- Don't install sample configuration files and documents
- Don't build kernel support as a module or in NOTES
- Don't build netgraph wrapper nodes for netatm
This removes the last remaining consumer of NET_NEEDS_GIANT.
Reviewed by: harti
Discussed with: bz, bms
Approved by: re (kensmith)
vm_phys_free_pages(). Rename vm_phys_alloc_pages_locked() to
vm_phys_alloc_pages() and vm_phys_free_pages_locked() to
vm_phys_free_pages(). Add comments regarding the need for the free page
queues lock to be held by callers to these functions. No functional
changes.
Approved by: re (hrs)
- CMT_PF states added (w/sysctl to turn the PF version on)
- sctp_input.c had a missing incr of cookie case when the
auth was bad. This meant a free was called without an
increment to refcnt, added increment like rest of code.
- There was a case, unlikely, when the scope of the destination
changed (this is a TSNH case). In that case, it would not free
the alloc'ed asoc (in sctp_input.c).
- When listed addresses found a colliding cookie/Init, then
the collided upon tcb was not unlocked in sctp_pcb.c
- Add error checking on arguments of sctp_sendx(3) to prevent it from
referencing a NULL pointer.
- Fix an error return of sctp_sendx(3), it was returing
ENOMEM not -1.
- Get assoc id was changed to use the sanctified socket api
method for getting a assoc id (PEER_ADDR_INFO instead of
PEER_ADDR_PARAMS).
- Fix it so a peeled off socket will get a proper error return
if it trys to send to a different address then it is connected to.
- Fix so that select_a_stream can avoid an endless loop that
could hang a caller.
- time_entered (state set time) was not being set in all cases
to the time we went established.
Approved by: re(ken smith)
This adds a function to agp.c to set the aperture resource ID if it's
not the usual AGP_APBASE. Previously, agp.c had been assuming
AGP_APBASE, which resulted in incorrect agp_info, and contortions by
agp_i810.c to work around it.
This also adds functions to agp.c for default AGP_GET_APERTURE() and
AGP_SET_APERTURE(), which return the aperture resource size and disallow
aperture size changes. Moving to these for our AGP drivers will likely
result in stability improvements. This should fix 855-class aperture
size detection.
Additionally, refuse to attach agp_i810 when some RAM is above 4GB and
the GART can't reference memory that high. This should be very rare.
The correct solution would be bus_dma conversion for agp, which is
beyond the scope of this change. Other AGP drivers could likely use
this change as well.
G33/Q35/Q33 AGP support is also included, but disconnected by default
due to lack of testing.
PR: kern/109724 (855 aperture issue)
Submitted by: FUJIMOTO Kou<fujimoto@j.dendai.ac.jp>
Approved by: re (hrs)
Add support for the CENTIPAD board (http://www.harerod.de/centipad/index.html)
(which is a very cool, very small ARM board)
Add support for KB9202B (it has different memory)
Make BOOT_FLAVOR settable
Minor cleanup nits
Approved by: re@
by removing files from src/sys/coda, and updating include paths in the
new location, kernel configuration, and Makefiles. In one case add
$FreeBSD$.
Discussed with: anderson, Jan Harkes <jaharkes@cs.cmu.edu>
Approved by: re (kensmith)
Repo-copy madness: simon
- change include style so build in kernel try OR standalone work.
- Limit HWCSUM - I was led to believe that it would work with RSS,
but our testing had odd issues which suggests this is false.
- A fatfinger error in the ioctl code made ifconfig up not work.
Approved by: re
kernels exposed by the recent fixes to resource limits for 32-bit processes
on 64-bit kernels:
- Let ABIs expose their maximum stack size via a new pointer in sysentvec
and use that in preference to maxssiz during exec() rather than always
using maxssiz for all processses.
- Apply the ABI's limit fixup to the previous stack size when adjusting
RLIMIT_STACK to determine if the existing mapping for the stack needs to
be grown or shrunk (as well as how much it should be grown or shrunk).
Approved by: re (kensmith)
to the FAT is possible.
Make the FAT block size less arbitrary before it is rounded up:
- for FAT12, default to 3*512 instead of to 3 sectors. The magic 3 is
the default number of 512-byte FAT sectors on a floppy drive. That
many sectors is too many if the sector size is larger.
- for !FAT12, default to PAGE_SIZE instead of to 4096. Remove
MSDOSFS_DFLTBSIZE since it only obfuscated this 4096.
For reading the BPB, use a block size of 8192 instead of 2048 so that
sector sizes up to 8192 can work. We should try several sizes, or just
try the maximum supported size (MAXBSIZE = 64K). I use 8192 because
that is enough for DVD-RW's (even 2048 is enough) and 8192 has been
tested a lot in use by ffs.
This completes fixing msdosfs for some large sector sizes (up to 8K
for read and 64K for write). Microsoft documents support for sector
sizes up to 4K in mdosfs. ffs is currently limited to 8K for both
read and write.
Approved by: re (kensmith)
Approved by: nyan (several years ago)
Rev 1.9 introduced another path where machclk_freq would be initialized
before the rest of setup was done (i.e. initializing the callout). Make
the one-time initialization a separate function and make init_machclk()
able to be called multiple times, any time. We depend on tsc_freq first
being updated from the highest priority eventhandler, thus we run last
and call init_machclk() to set machclk_freq. Also, don't initialize
static variables to 0.
Tested by: Eygene Ryabinkin
Approved by: re
part of fixing msdosfs for large sector sizes. One of the fixed bugs
was fatal for large sector sizes.
1. The fsinfo block has size 512, but it was misunderstood and declared
as having size 1024, with nothing in the second 512 bytes except a
signature at the end. The second 512 bytes actually normally (if
the file system was created by Windows) consist of a second boot
sector which is normally (in WinXP) empty except for a signature --
the normal layout is one boot sector, one fsinfo sector, another
boot sector, then these 3 sectors duplicated. However, other
layouts are valid. newfs_msdos produces a valid layout with one
boot sector, one fsinfo sector, then these 2 sectors duplicated.
The signature check for the extra part of the fsinfo was thus
normally checking the signature in either the second boot sector
or the first boot sector in the copy, and thus accidentally
succeeding. The extra signature check would just fail for weirder
layouts with 512-byte sectors, and for normal layouts with any other
sector size.
Remove the extra bytes and the extra signature check.
2. Old versions did i/o to the fsinfo block using size 1024, with the
second half only used for the extra signature check on read. This
was harmless for sector size 512, and worked accidentally for sector
size 1024. The i/o just failed for larger sector sizes.
The version being fixed did i/o to the fsinfo block using size
fsi_size(pmp) = (1024 << ((pmp)->pm_BlkPerSec >> 2)). This
expression makes no sense. It happens to work for sector small
sector sizes, but for sector size 32K it gives the preposterous
value of 64M and thus causes panics. A sector size of 32768 is
necessary for at least some DVD-RW's (where the minimum write size
is 32768 although the minimum read size is 2048).
Now that the size of the fsinfo block is 512, it always fits in
one sector so there is no need for a macro to express it. Just
use the sector size where the old code uses 1024.
Approved by: re (kensmith)
Approved by: nyan (several years ago for a different version of (2))
than indirecting through ifaddr_byindex, which makes things easier with
respect to virtualized network stacks.
Submitted by: Marko Zec <zec at icir dot org>
Reviewed by: Leonid Grossman <Leonid dot Grossman at neterion dot com>
Approved by: re (kensmith)
non-sleepable lock held. drm_pci_alloc() calls them, thus drm mutex shall
not be held during the call.
Move the drm_pci_alloc() to the start of the i915_initialize() and drop the
the drm mutex around it.
Reported by: Ganbold <ganbold micom mng net>
Reviewed by: anholt
Approved by: re (hrs)
MFC after: 1 week
- use net80211 for scanning and pass the results back to the scan cache
- use ieee80211_init_channels to fill our channel list
- fix up state transitions
- depreciate the old wicontrol ioctls
- add some debugging lines (#define NDIS_DEBUG)
Reviewed by: sam
Approved by: re (kensmith)
ENOTTY. Make the control vnode a regular file so that ioctls are passed
through to our kernel module.
Submitted by: Jan Harkes <jaharkes@cs.cmu.edu>
Approved by: re (kensmith)
some previously disabled code which according to the comment caused a
problem during shutdown. But even that is still better than
triggering a kernel panic whenever venus is started.
Submitted by: Jan Harkes <jaharkes@cs.cmu.edu>
Approved by: re (kensmith)
we can't open container files by device/inode number pair anymore.
Replace the CODA_OPEN upcall with CODA_OPEN_BY_FD, where venus returns
an open file descriptor for the container file. We can then grab a
reference on the vnode coda_psdev.c:vc_nb_write and use this vnode for
further accesses to the container file.
Submitted by: Jan Harkes <jaharkes@cs.cmu.edu>
Approved by: re (kensmith)
ioctls can be removed. These have been #ifdef'd out and left as a reference in
case any of the RIDs need to be turned into sysctls at a later date.
Reviewed by: sam, avatar
Approved by: re (kensmith)
operations. But we don't have to, if we find the coda_mntinfo structure
for this device in our linked list, we know the device is good.
Submitted by: Jan Harkes <jaharkes@cs.cmu.edu>
Approved by: re (kensmith)
need to initialize dev so that we can actually find the allocated
coda_mntinfo structure later on.
Submitted by: Jan Harkes <jaharkes@cs.cmu.edu>
Approved by: re (kensmith)
macros for lock_profiling.
Reported by: Tom McLaughlin <tmclaugh@sdf.lonestar.org>
Tested by: Tom McLaughlin <tmclaugh@sdf.lonestar.org>
Approved by: jeff (mentor)
Approved by: re
ELF files. On ia64 the ELF header contains information about
characteristics of the machine code and ld(1) needs that to
determine whether input files are compatible for linking. To
this end non-ELF files are not supported by binutils on ia64.
However, the resulting ELF file seems to be correct despite the
warnings and the non-supportedness of non-ELF files and it
appears enough to unbreak the build of firmware(9) files on ia64
by simply supressing the warning.
Ran into by: gallatin@
Approved by: re (hrs)
Looks good to me: mlaier@
vm_page_cowfault(). Initially, if vm_page_cowfault() sleeps, the given
page is wired, preventing it from being recycled. However, when
transmission of the page completes, the page is unwired and returned to
the page queues. At that point, the page is not in any special state
that prevents it from being recycled. Consequently, vm_page_cowfault()
should verify that the page is still held by the same vm object before
retrying the replacement of the page. Note: The containing object is,
however, safe from being recycled by virtue of having a non-zero
paging-in-progress count.
While I'm here, add some assertions and comments.
Approved by: re (rwatson)
MFC After: 3 weeks
of the the first cluster in a file (and, if the allocation cannot be
continued contiguously, for subsequent clusters in a file) was randomized
in an attempt to leave space for contiguous allocation of subsequent
clusters in each file when there are multiple writers. This reduced
internal fragmentation by a few percent, but it increased external
fragmentation by up to a few thousand percent.
Use simple sequential allocation instead. Actually maintain the fsinfo
sequence index for this. The read and write of this index from/to
disk still have many non-critical bugs, but we now write an index that
has something to do with our allocations instead of being modified
garbage. If there is no fsinfo on the disk, then we maintain the index
internally and don't go near the bugs for writing it.
Allocating the first free cluster gives a layout that is almost as good
(better in some cases), but takes too much CPU if the FAT is large and
the first free cluster is not near the beginning.
The effect of this change for untar and tar of a slightly reduced copy
of /usr/src on a new file system was:
Before (msdosfs 4K-clusters):
untar: 459.57 real untar from cached file (actually a pipe)
tar: 342.50 real tar from uncached tree to /dev/zero
Before (ffs2 soft updates 4K-blocks 4K-frags)
untar: 39.18 real
tar: 29.94 real
Before (ffs2 soft updates 16K-blocks 2K-frags)
untar: 31.35 real
tar: 18.30 real
After (msdosfs 4K-clusters):
untar 54.83 real
tar 16.18 real
All of these times can be improved further.
With multiple concurrent writers or readers (especially readers), the
improvement is smaller, but I couldn't find any case where it is
negative. 342 seconds for tarring up about 342 MB on a ~47MB/S partition
is just hard to unimprove on. (This operation would take about 7.3
seconds with reasonably localized allocation and perfect read-ahead.)
However, for active file systems, 342 seconds is closer to normal than
the 16+ seconds above or the 11 seconds with other changes (best I've
measured -- won easily by msdosfs!). E.g., my active /usr/src on ffs1
is quite old and fragmented, so reading to prepare for the above
benchmark takes about 6 times longer than reading back the fresh copies
of it.
Approved by: re (kensmith)
- Move udp_sendspace and udp_recvspace global variables and associated
sysctls to the top of the file where most other such things are present.
- Rename static variable 'blackhole' to 'udp_blackhole' and unstaticize
so that we can add blackhole support for UDPv6 using the same MIB
variable.
- Move udp_append() above udp_input() to match the function order in
udp6_usrreq.c.
Approved by: re (kensmith)
- reduce cpu usage by as much as 25% (40% -> 30) by doing txq reclaim more efficiently
- use mtx_trylock when trying to grab the lock to avoid spinning during long encap loop
- add per-txq reclaim task
- if mbufs were successfully re-claimed try another pass
- track txq overruns with sysctl
Approved by: re (blanket)
- Add controller id for Intel 82801I (ICH9).
PR: kern/114399
Submitted by: Michael Fuckner <michael@fuckner.net>
- MSI support. Disable by default due to various issues with too many
broken hardwares. MSI can be enabled through device.hints(5) or
kenv(8) by setting "hint.pcm.%d.msi=1".
Partially submitted by: kevlo
YAMAMOTO Taku <taku@tackymt.homeip.net>
Tested by: joel, kevlo, YAMAMOTO Taku
Approved by: re (hrs)
MFC after: 3 days
prototypes, don't use register, etc. Synchronize structure and
layout to the IPv4 versions of these functions to a greater extent,
making visual comparison easier.
Remove now stale or incorrect comments.
Enable full lock assertions, and correct one exception handling
case where the wrong label was jumped to.
Tested by: bz
Approved by: re (bmah)
do the heavy lifting of the 'mii_tick' function, rue was left behind.
Implement this in a naive way. Reports from the field show this makes
the driver functional with some locking issues, as opposed to an
instant panic. Those will be addressed in a later version of the
driver.
Approved by: re@ (bmah)
With the in_mcast.c code, if an interface for an IPv4 multicast join was
not specified, and a route did not exist for the specified group in the
unicast forwarding tables, the join would be rejected with the error
EADDRNOTAVAIL.
This change restores the old behaviour whereby if no interface is specified,
and no route exists for the group destination, the IPv4 address list is
walked to find a non-loopback, multicast-capable interface to satisfy
the join request.
This should resolve problems with starting multicast services during
system boot or when a default forwarding entry does not exist.
Approved by: re (rwatson)
Sort NETGEAR list per convention.
Swap QUALCOMM and QUALCOMM2.
Add a few vendor products.
no md5 changes with this file (except when USBVERBOSE is enabled)
Approved by: re@ (blanket)
vm_fault_additional_pages() that was introduced in revision 1.47. Then
as now, it is unnecessary because dev_pager_haspage() returns zero for
both the number of pages to read ahead and read behind, producing the
same exact behavior by vm_fault_additional_pages() as the special case
handling.
Approved by: re (rwatson)
- Plug memory leak.
- Respect underlying vnode's properties rather than assuming that
the user want root:wheel + 0755. Useful for using tmpfs(5) for
/tmp.
- Use roundup2 and howmany macros instead of rolling our own version.
- Try to fix fsx -W -R foo case.
- Instead of blindly zeroing a page, determine whether we need a pagein
order to prevent data corruption.
- Fix several bugs reported by Coverity.
Submitted by: Mingyan Guo <guomingyan gmail com>, Howard Su, delphij
Coverity ID: CID 2550, 2551, 2552, 2557
Approved by: re (tmpfs blanket)
- Handle directories and leaves other than unit directories and text leaves
correctly.
- Now we can retrieve CROM of iSight correctly.
Approved by: re (hrs)
Tested by: flz
MFC after: 3 days
- When a LDT entry changes, the old one is freed while it is still
referenced by gdt and ldtr. This can lead to disruptive behaviours in
particular on SMP machines.
- When a LDT entry changes, it is assumed that the only one entity sharing
the same LDT are threads in the same proc. It doesn't take in account
edge cases where two processes share the same VM (rfork'ed ones, for
example).
This patch addresses these two problems and addictionally it fixes the
usage of refcount switching back it to the old manually-grown refcount
(since in this case would be faster).
Diagnosed by: tegge
Tested by: pho (a former version)
Reviewed by: kib
Approved by: jeff (mentor)
Approved by: re
free to be consistent with other error handling, and release socket buffer
lock before freeing mbufs and statistics updates rather than after.
Approved by: re (kensmith)
tracks the total number of reactivated pages. (We have not been
counting reactivations by vm_fault() since revision 1.46.)
Correct a comment in vm_fault_additional_pages().
Approved by: re (kensmith)
MFC after: 1 week
