in. These are exclusively in the name of the company for this round.
No new devices have been added, but the MITEL entry has been
eliminated because nothing uses it. You won't see any difference
unless you have USBVERBOSE defined for the kernel.
Approved by: re@ (blanket)
- Adjust lock_profiling stubs semantic in the hard functions in order to be
more accurate and trustable
- Disable shared paths for lock_profiling. Actually, lock_profiling has a
subtle race which makes results caming from shared paths not completely
trustable. A macro stub (LOCK_PROFILING_SHARED) can be actually used for
re-enabling this paths, but is currently intended for developing use only.
- Use homogeneous names for automatic variables in hard functions regarding
lock_profiling
- Style fixes
- Add a CTASSERT for some flags building
Discussed with: kmacy, kris
Approved by: jeff (mentor)
Approved by: re
sys/i4b/include/ so they will be available to all architectures
once I4B compiles on those.
We no longer need these "glue" files.
Reminded by: nyan
Approved by: re (kensmith)
nxge: cast page size fragments down to (int). If the vm's demand paging
PAGE_SIZE is ever too big for that, we've got far bigger problems.
ofw: move va_start() a little earlier. gcc-4.2 doesn't like us modifying
the last arg before the va_start().
Approved by: re (rwatson)
would be 93C46(1Kbit) or 93C56(2Kbit). One of differences between them
is number of address lines required to access the EEPROM. For example,
93C56 EEPROM needs 8 address lines to read/write data. If 93C56
recevied premature end of required number of serial clock(CLK) to set
OP code/address of EEPROM, the result would be unexpected behavior.
Previously it tried to detect 93C46, which requires 6 address lines,
and then assumed it would be 93C56 if read data was not expected
value. However, this approach didn't work in some models/situations
as 93C56 requries 8 address lines to access its data. In order to fix
it, change EEPROM probing order such that 93C56 is detected reliably.
While I'm here change hard-coded address line numbers with defined
constant to enhance readability.
PR: 112710
Approved by: re (mux)
- Sort copyrights by date.
- Re-wrap, and in some cases, fix comments.
- Fix tabbing, white space, remove extra blank lines.
- Remove commented out debugging printfs.
Approved by: re (kensmith)
it with netipsec now that KAME IPsec is gone.
While here add missing netinet6 directories.
Add comments about the ports needed to be able to run those targets.
Reviewed by: philip
Approved by: re (rwatson)
o Adonics Cable 205
o Aiptek PocketCAM 3Mega
o Belkin USB2SCSI
o Casio QV DigiCam
o CCYU EasyDisk ED1064
o Desknote UCR-61S2B
o Epson Stylus Photo 875DC Card Reader
o Epson Stylus Photo 895 Card Reader
o Feiya 5-in-1 Card Reader
o Hitachi Dvd-CAM DZ-MV100A Camcorder
o HP CD-WRiter+ CD-4e
o Insystem Storage Adapter v2
o Kyocera Finecam S3x
o Kyocera Finecam S4
o Kyocera Finecam S5
o Kyocera Finecam L3
o Lexar USB CF Reader
o MindAtWork Digital Wallet
o Minolta Dimage F300
o Minolta Dimage E223
o Minsumi USB Fdd
o Netac USB-CF-Card
o NetChip USB Clik! 40
o Onspec MDCFE-B USB CF Reader
o Onspec SIIG/Datafab Memory Stick + CF Reader/Writer
o Onspec Datafab-based Reader
o Onspec PNY/Datafab CF+SM Reader
o Onspec SimpleTech/Datafab CF+SM Reader
o Onspec MDSM-b Reader
o Onspec USB To CF + SM Combo (LC1)
o Onspec ImageMate SDDR55
o Panasonic LS-120 Camera
o Samsung Techwin Digimax 410
o Shuttle eUSB SmartMedia / CompactFlash Adapter
o Skanhex MD 7425 Camera
o Skanhex SX 520z Camera
o Sony Memorystick NW-MS7
o Sony Portable USB Hardrive V2
o Sony Memorystick PEG N760c
o Sony Memorystick MSC-U03
o TREK/IBM USB memory key
o Trumpion T33520 USB Flash Card Controller
o Trumpion MP3 Player
o Vivtar Vivicam 35Xx
o WinMaxGroup USB Flash Disk 64M-C
o Zoran Digital Camera EX-20 DSC
and maybe a few others...
Submitted by: Vaidas Damosevicius and flz
PR: 79893
Reviewed by: njl, flz
Approved by: re (blanket)
ftruncate(), but without the pad arg.
There are several reasons for this. Consider 'mmap()'. On AMD64, the
function call (and syscall) ABI allow for 6 register arguments. Additional
arguments go on the stack. mmap(2) has 6 arguments. However, the syscall
definition has an extra 'int pad' argument. This pushes it to 7 arguments,
which means one must spill into the memory stack. Since the kernel API
doesn't match userland API, we have a hack in libc - libc/sys/mmap.c.
This implements the userland API by calling __syscall() with an extra
argument and the pad argument, for a total of 8 args. This is all
unnecessary and inconvenient for several things, including the kernel's
syscall handler code which now has to handle merging stack arguments with
register arguments. It is a big deal for certain 3rd party code.
I'm adding libc glue to make the transition totally painless. I had
intended to mark the old syscalls as COMPAT6, but the potential to shoot
your feet by building a new kernel without COMPAT_FREEBSD6 but with a
slighly older userland was too great. For now, they have manual
"freebsd6_" prefixes rather than being COMPAT6. They will go back to
being marked 'COMPAT6' after 7-stable starts.
Approved by: re (kensmith)
Also, change the visibility of compat syscalls a slightly. Compat
syscalls were missing from 'syscalls.h' entirely. This additionally adds
them with their compat prefix. eg: SYS_freebsd6_mmap.
Also, the syscalls.c names strings have different prefixes to differentiate
syscalls. Instead of several "old.mmap" strings, there will now be a
"compat.mmap" and "compat6.mmap" etc. Before, both would have had the
same "old.mmap" label.
Approved by: re
that should be a no-op (for example, requesting SYNC on record path).
The standards does not indicate that such requests are illegal, so
just return it as success instead of EINVAL.
Approved by: re (mux)
shall not be called while holding cdev mutex. devfs_inos unrhdr has cdev as
mutex, thus creating this LOR situation.
Postpone calling free() in kern/subr_unit.c:alloc_unr() and nested functions
until the unrhdr mutex is dropped. Save the freed items on the ppfree list
instead, and provide the clean_unrhdrl() and clean_unrhdr() functions to
clean the list.
Call clean_unrhdrl() after devfs_create() calls immediately before
dropping cdev mutex. devfs_create() is the only user of the alloc_unrl()
in the tree.
Reviewed by: phk
Tested by: Peter Holm
LOR: 80
Approved by: re (kensmith)
the 7.0 timeframe.
This is needed because I4B is not locked and NET_NEEDS_GIANT goes away.
The plan is to lock I4B and bring everything back for 7.1.
Approved by: re (kensmith)
setenv(3) by tracking the size of the memory allocated instead of using
strlen() on the current value.
Convert all calls to POSIX from historic BSD API:
- unsetenv returns an int.
- putenv takes a char * instead of const char *.
- putenv no longer makes a copy of the input string.
- errno is set appropriately for POSIX. Exceptions involve bad environ
variable and internal initialization code. These both set errno to
EFAULT.
Several patches to base utilities to handle the POSIX changes from
Andrey Chernov's previous commit. A few I re-wrote to use setenv()
instead of putenv().
New regression module for tools/regression/environ to test these
functions. It also can be used to test the performance.
Bump __FreeBSD_version to 700050 due to API change.
PR: kern/99826
Approved by: wes
Approved by: re (kensmith)
can acquire shared filedescriptor locks in the appropriate cases.
- Remove Giant from calls that issue ioctls. The ioctl path has been
mpsafe for some time now.
- Only acquire giant for VOP_ADVLOCK when the filesystem requires giant.
advlock is now mpsafe.
Reviewed by: rwatson
Approved by: re
to protect this datastructure instead.
- Preallocate an extra lockf structure in case we want to split a lock
on insert or delete.
- msleep() on the vnode interlock when blocking on a lock.
Reviewed by: rwatson
Approved by: re
- Use cpu_spinwait() in the spin loops in stop_cpus(), restart_cpus(), and
smp_rendezvous_action().
- Remove unneeded acq memory barriers in stop_cpus(), restart_cpus(), and
smp_rendezvous_action().
- Add an additional synch point in smp_rendezvous() to ensure that all the
CPUs will always see an up-to-date value of smp_rv_setup_func.
Reviewed by: attilio
Approved by: re (kensmith)
Tested on: alpha, amd64, i386, sparc64 SMP (for several years)
nfsnode could lead to attrs being stale. One example (that we
ran into) was a READDIR+, WRITE. The responses came back in
order, but the attrs from the WRITE were loaded before the
attrs from the READDIR+, leading to the wrong size from being
read on the next stat() call.
MFC after: 1 week
Submitted by: mohans
Approved by: re (kensmith)
recoverable and unrecoverable. For the former, we redirty the
buffer and hang onto it for future retries. For the latter (eg.
ESTALE), we discard the buffer and return the error back to the
user on the next syscall. This fixes a number of vfs panics and
fixes having a large number of dirty buffers (that cannot be
written out and reclaimed) from hanging around. Thanks to ups@
for discussions on this issue.
Reported by: kris, Kai, others
Approved by: re (kensmith)
Lock cdev mutex too to close the race with tty being freed.
Relock clone_drain_lock to prevent the LOR with proctree lock, thus
add #include <fs/devfs/devfs_int.h>.
Suggested by: tegge
Debugging help and testing by: Peter Holm
Approved by: re (kensmith)
Lock Giant in the clone handler.
Use destroy_dev_sched() explicitely from pty_maybecleanup() and postpone
pty_release() until both master and slave cdevs are destroyed by setting
it as callback for destroy_dev_sched().
Debugging help and testing by: Peter Holm
Approved by: re (kensmith)
destroy_dev() is called from csw method, and no d_purge driver method is
provided. Transform the direct call to destroy_dev() into destroy_dev_sched().
Reviewed by: njl (programming interface)
Debugging help and testing by: Peter Holm
Approved by: re (kensmith)
destroy_dev() from d_close() cdev method would self-deadlock.
devfs_close() bump device thread reference counter, and destroy_dev()
sleeps, waiting for si_threadcount to reach zero for cdev without
d_purge method.
destroy_dev_sched() could be used instead from d_close(), to
schedule execution of destroy_dev() in another context. The
destroy_dev_sched_drain() function can be used to drain the scheduled
calls to destroy_dev_sched(). Similarly, drain_dev_clone_events() drains
the events clone to make sure no lingering devices are left after
dev_clone event handler deregistered.
make_dev_credf(MAKEDEV_REF) function should be used from dev_clone
event handlers instead of make_dev()/make_dev_cred() to ensure that created
device has reference counter bumped before cdev mutex is dropped inside
make_dev().
Reviewed by: tegge (early versions), njl (programming interface)
Debugging help and testing by: Peter Holm
Approved by: re (kensmith)
First, we were never correctly checking for a 24XX Status Type 0
response- that cased us to fall through to evaluate status for
commands as if this were a 2100/2200/2300 Status Type 0 response.
This is *close*, but not quite the same. This has been reported
to be apparent with some wierd lun configuration problems with
some arrays. It became glaringly apparent on sparc64 where none
of the correct byte swap things were done.
Fixing this omission then caused a whole universe shifting debug
cycle of endian issues for the 2400. The manual for 24XX f/w turns
out to be wrong about the endianness of a couple of entities. The
lun and cdb fields for the type 7 request are *not* unconditionally
big endian- they happen to be opposite of whatever the endian of
the current machine type is. Same with the sense data for the
24XX type 0 response.
While we're at it investigate and resolve some NVRAM endian
issues.
Approved by: re (ken)
MFC after: 3 days
call the sctp_free_remote_address() function.
- Assure that when we allocate a chunk the whoTo is NULL,
also when we free it and place it into the cache we NULL
it (that way the consolidation code will always work).
- Fix a small race, when a empty data holder is left on the stream
out queue, and both sides do a shutdown, the empty data holder
would prevent us from sending a SHUTDOWN-ACK and at the same time we
never would cleanup the empty holder (since nothing was ever in queue).
We now add a utility function that a) cleans up empty holders and
b) properly determines if there are still pending data chunks on
the stream out wheel.
Approved by: re@freebsd.org (Ken Smith)
of Giant in vm_pageout_scan() with VFS_LOCK_GIANT(), I had to eliminate
the acquisition of the vnode interlock before releasing the vm object's
lock because the vnode interlock cannot be held when VFS_LOCK_GIANT() is
performed. Unfortunately, this allows the vnode to be recycled between
the release of the vm object's lock and the vget() on the vnode.
In this revision, I prevent the vnode from being recycled by acquiring
another reference to the vm object and underlying vnode before releasing
the vm object's lock.
This change also addresses another preexisting but trivial problem. By
acquiring another reference to the vm object, I also prevent the vm
object from being recycled. Previously, the "vnodes skipped" counter
could be wrong because if it examined a recycled vm object.
Reported by: kib
Reviewed by: kib
Approved by: re (kensmith)
MFC after: 3 weeks
and replace with software-testable sysctl node (security.audit) that
can be used to detect kernel audit support.
Obtained from: TrustedBSD Project
Approved by: re (kensmith)
Submitted by: Simon Schubert <corecode@fs.ei.tum.de>
- Defer flushing unsolicited response into taskqueue thread rather
than handle it directly in interrupt handler, since few of its
operations (like measuring/calibrating jack impedance) are quite
expensive.
- Misc. debugging cleanups.
Tested by: joel
Approved by: re (hrs)
MFC after: 3 days
Note: The offending quirk should have been made model/codec specific,
but since there were no records / log which model requires it, the quirk
logic had to be inverted (blacklist instead of whitelist).
Tested by: Arkadiy Dudevitch <dudevitch@englerllc.com>
Approved by: re (hrs)
MFC after: 3 days
This commit includes only the kernel files, the rest of the files
will follow in a second commit.
Reviewed by: bz
Approved by: re
Supported by: Secure Computing
holding the page queues lock. Thus, the page table pages released by
pmap_remove() and pmap_remove_pages() can be freed after the page queues
lock is released.
Approved by: re (kensmith)
- provide dummy routines for ic_scan_curchan and ic_scan_mindwell, we do not support those operations.
- add ieee80211_scan_done() to tell the scanning module that all channels have been scanned.
- pass IEEE80211_S_SCAN state off to net80211 so it can initiate scanning
- fix overflow in the rates array
- scale the rate value passed back from the firmware scan to the units that net80211 uses.
Submitted by: Token
Reviewed by: sam, avatar
Approved by: re (kensmith)
operating channel and use this in the scan cache rather than directly using
ic_curchan. Some firmware cards can only do a full scan and so ic_curchan does
not have the correct value.
Also add IEEE80211_CHAN2IEEE to directly dereference ic_ieee from the channel
to be used in the fast path.
Reviewed by: sam, sephe
Approved by: re (kensmith)
to be index by IEEE channel number but that is no longer the case and it needs
to be searched for.
Submitted by: avatar
Reviewed by: sam
Approved by: re (kensmith)
(1) Add size parameter to usbd_get_string()
(2) Properly limit speed when a full speed hub is plugged into a high
speed hub.
Submitted by: Hans Petter Selasky
PR: 80773, 79725
Approved by: re@ (kensmith)
yet supported by this driver. Support will be committed soon, or a
filter on all the 'newer' devices will be installed before the
release.
Approved by: re@ (blanket)
Obtained from: NetBSD, OpenBSD
Small Furry Animals by: Pink Floyd
switch (i.e. lid) is set to have an action of NONE. This is not an
invalid state, so silently return. This fixes the warning:
"acpi: request to enter state S6 failed (err 22)"
Approved by: re
the command. Make UFI devices return 'success' when asked to do a
SYNC_CACHE. There's no support for write caching in the UFI spec, so
this is the most appropriate action to undertake.
Reviewed by: scottl
Approved by: re@ (blanket)
Hellmuth with some refinements by myself and flz@. It works for me
with my non-MS mice, so nothing should be broken by it.
Submitted by: Hellmuth Michaelis
PR: 90162
Approved by: re (blanket)
pr, the submitter says:
Found this while running freebsd as guest in qemu with -usb
parameter. The patch implements the missing dynamic size based on
number of ports a hub has.
Submitted by: Lonnie Mendez
PR: 94946
Approved by: re@ (blanket)
- Remove unnecessary NULL checks after M_WAITOK allocations.
- Use VOP_ACCESS instead of hand-rolled suser_cred()
calls. [1]
- Use malloc(9) KPI to allocate memory for string. The
optimization taken from NetBSD is not valid for FreeBSD
because our malloc(9) already act that way. [2]
Requested by: rwatson [1]
Submitted by: Howard Su [2]
Approved by: re (tmpfs blanket)
properly (un)padded on the arm platform. With this change, FreeBSD/arm
boxes are able to route AppleTalk properly.
Submitted/tested by: Nathan Whitehorn <nathanw at uchicago dot edu>
Tested on: arm, i386, amd64
Approved by: re (kensmith)
patch that converts ms to ticks was used. Another PR states that a
return code of 0 is the right one for libusb.
Submitted by: Lonnie Mendez
PR: 94311
Approved by: re (blanket)
adequate. Increase them to 1k. The referenced PR made this a sysctl,
but that seems like overkill to me. The difference between 320 and
2048 bytes in modern systems, even embedded ones, seems to be in the
noise to be worth the extra hair to make it settable.
PR: 74609
Submitted by: Divacky Roman
Approved by: re (blanket)
applied to, but I'd think both), honor the timeout that's been set.
Return 0 bytes to be consistant with what libusb expects. By default,
the timeout will be zero, so only applications that change the default
will see a change. The patch only seems to apply to the interrupt end
points, but it should also apply to isochronous endpoints as well.
Submitted by: Maurice Castro
PR: 110122
Approved by: re (blanket)
- In audit_bsm.c, make sure all the arguments: ARG_AUID, ARG_ASID, ARG_AMASK,
and ARG_TERMID{_ADDR} are valid before auditing their arguments. (This is done
for both setaudit and setaudit_addr.
- Audit the arguments passed to setaudit_addr(2)
- AF_INET6 does not equate to AU_IPv6. Change this in au_to_in_addr_ex() so the
audit token is created with the correct type. This fixes the processing of the
in_addr_ex token in users pace.
- Change the size of the token (as generated by the kernel) from 5*4 bytes to
4*4 bytes (the correct size of an ip6 address)
- Correct regression from ucred work which resulted in getaudit() not returning
E2BIG if the subject had an ip6 termid
- Correct slight regression in getaudit(2) which resulted in the size of a pointer
being passed instead of the size of the structure. (This resulted in invalid
auditinfo data being returned via getaudit(2))
Reviewed by: rwatson
Approved by: re@ (kensmith)
Obtained from: TrustedBSD Project
MFC after: 1 month
some false positives but at this moment it is better to add
support then to dont have it at all (comment from Soren).
PR: kern/111516
Submitted by: Thomas Nystrom <thn at saeab dot se>
Approved by: re (kensmith)
Approved by: imp (mentor)
OK'ed by: sos (With the comment noted above about false
positives).
could lead to a deadlock).
- sleepq_set_timeout acquires callout_lock (via callout_reset()) only
with sleepq chain lock held
- msleep_spin in _callout_stop_safe lock the sleepqueue chain with
callout_lock held
In order to solve this don't use msleep_spin in _callout_stop_safe() but
use directly sleepqueues as inline msleep_spin code. Rearrange the
wakeup path in order to have it consistent too.
Reported by: kris (via stress2 test suite)
Tested by: Timothy Redaelli <drizzt@gufi.org>
Reviewed by: jhb
Approved by: jeff (mentor)
Approved by: re
This is very similar to sx_init_flags: it initializes the rwlock using
special flags passed as third argument (RW_DUPOK, RW_NOPROFILE,
RW_NOWITNESS, RW_QUIET, RW_RECURSE).
Among these, the most important new feature is probabilly that rwlocks
can be acquired recursively now (for both shared and exclusive paths).
Because of the recursion counter, the ABI is changed.
Tested by: Timothy Redaelli <drizzt@gufi.org>
Reviewed by: jhb
Approved by: jeff (mentor)
Approved by: re
put out a ispreqt2e_t structure onto the request queue- not a ispreqt2_t
structure. I forgot that the 23XX can use a t2 structure.
Approved by: re (ken, implicitly)
MFC after: 3 days
mpo_check_proc_setaudit_addr to be used when controlling use of
setaudit_addr(), rather than mpo_check_proc_setaudit(), which takes a
different argument type.
Reviewed by: csjp
Approved by: re (kensmith)
changes for example:
(From Craig Leres):
tip to a rocketport line
run "/etc/rc.d/devfs restart"
exit tip
(wait for the system to reboot)
Thanks to Robert Watson for poking me to fix this.
PR: kern/109152
Approved by: imp (mentor)
Approved by: re (kensmith)
Reviewed by: jhb
Submitted by: Craig Leres <leres@ee dot lbl dot gov>
of the file numerically for vendors and then each product numerically
by vendor (with all the foo2's sorting after the foo's). Someday, all
the usbdevs will be merged, I hope, but until then, we have these
mega-merges.
This also finishes the LINKSYS4 -> CISCOLINKSYS rename.
Approved by: re@ (blanket)
firmware reset. Also zero out struct iwi_rateset although its not strictly
necessary.
Reported by: Maxim Konovalov
Reviewed by: sam
Approved by: re (bmah)
- Remove tmpfs_zone_xxx KPI, the uma(9) wrapper, since
they does not bring any value now.
- Use |= instead of = when applying VV_ROOT flag.
- Remove tm_avariable_nodes list. Use uma to hold the
released nodes.
- init/destory interlock mutex of node when init/fini
instead of ctor/dtor.
- Change memory computing using u_int to fix negative
value in 2G mem machine.
- Remove unnecessary bzero's
- Rely uma logic to make file id allocation harder to
guess.
- Fix some unsigned/signed related things. Make sure
we respect -o size=xxxx
- Use wire instead of hold a page.
- Pass allocate_zero to obtain zeroed pages upon first
use.
Submitted by: Howard Su
Approved by: re (tmpfs blanket, kensmith)
to put out a ispreqt3e_t structure onto the request queue-
not a ispreqt3_t structure. We weren't. This turns out only
to really matter for big endian machines.
Approved by: re (ken)
MFC after: 3 days
around an output freezing problem (see the CVS log for details). This
is the same approach that sio takes to solve that problem. However,
ucom has a problem that sio doesn't have.
Consider the case where output is pending, and the device is closed.
ttyclose calls tt_close (which indirects to ucomclose) and then calls
ttyflush which calls tt_stop (which indirects to ucomstop). Since
ucomclose removed all the usb transfer points, sc_oxfer will be NULL
when ucomstop calls ucomstart. This results in a null pointer
dereference.
Since calling ucomstart in ucomstart solves other problems, we need to
work with this calling sequence. The easiest way to do that is to
bail early if sc_oxfer is NULL.
Kazuaki ODA-san came up with this patch, and filed a PR. I had seen
this bug at work and this patch does seem to solve it. He had no idea
why it worked, but knew that either this patch, or backing out ucom.c
1.56 fixed his panic. I just did the legwork of chasing down the code
paths that would cause this, and added a comment. This is obscure
enough to warrant a comment, I think.
Submitted by: Kazuaki ODA-san
PR: 113964
Approved by: re (bmah)
around to force the IO port to a fixed address. They were only turned
on in the module build and were present since the original import. This
breaks soft power-off on the Asus A7V since it reprograms the SMBus base
address to a different one than the BIOS expects. A similar issue was
found in the alpm(4) module build.
PR: kern/113986, i386/97468
MFC after: 3 days
Approved by: re
where a device timeout that occurs with a mgt frame on the tx q
will leave the net80211 layer w/o any way to make progress.
Reviewed by: thompsa, sephe
Approved by: re (hrs)
request queues rather than shove it down a word at a time, we have
to remember to put it into little endian format. Use the macros
ISP_IOXPUT_{16,32} for this purpose. Otherwise, on sparc the firmware
is loaded garbled and we get a (not surprisingly) firmware checksum
failure and the card won't start and we don't attach it.
Approved by: re (bruce)
MFC after: 3 days
both 6.x and 7.x. This is based on feedbacks on this thread
http://docs.freebsd.org/cgi/getmsg.cgi?fetch=81818+0+current/freebsd-stable
and my use it on 6.x.
MFC after: 3 days
- Update the warning about UNION filesystem. It is now actively maintained,
although there are still some issues being resolved.
Reviewed by: freebsd-stable@, kris, bmah
Approved by: re (bmah)
- Fix fwd-tsn to use proper accessor so it does not overrun mbufs
- Fix stream reset error reporting to actually work (it has always been
broken if the peer rejects a stream reset)
- Some 64 bit friendly changes
Approved by: re(bmah@freebsd.org)
some quota limit was exceeded. Sequence of UFS_VALLOC()/UFS_VFREE()
call there could cause inodeblock to have both freefile and inodedep
dependencies without any inode in the block being marked for write.
Then, softdep_check_suspend() would return EAGAIN forewer.
Force write of inodeblock with allocated freefile softdependency by
setting IN_MODIFIED flag in softdep_freefile and unconditionally calling
UFS_UPDATE() in ufs_reclaim.
Reported by: kris
Debug help and tested by: Peter Holm
Approved by: re (kensmith)
MFC after: 3 weeks
Previously it didn't honor parent dma tag's restrictions such that
an invalid dma segment could be passed to device. The driver for the
device may panic in sanity check routine for the dma segment or may
produce unexpected results. I have no idea how it could ever have
worked before.
Reviewed by: grehan
Tested by: gad
Approved by: re (hrs)
used to return PAGE_SIZE without respect to restrictions of a DMA tag.
This affected all of the busdma load functions that use
_bus_dmamap_loader_buffer() as their back-end.
Reviewed by: scottl (long a ago)
Approved by: re (hrs)
Improvements:
* /etc/rc.suspend,rc.resume are always run, no matter the source of the
suspend request (user or kernel, apm or acpi)
* suspend now requires positive user acknowledgement. If a user program
wants to cancel the suspend, they can. If one of the user programs
hangs or doesn't respond within 10 seconds, the system suspends anyway.
* /dev/apm is clonable, allowing multiple listeners for suspend events.
In the future, xorg-server can use this to be informed about suspend
even if there are other listeners (i.e. apmd).
Changes:
* Two new ACPI ioctls: REQSLPSTATE and ACKSLPSTATE. Request begins the
process of suspending by notifying all listeners. acpi is monitored by
devd(8) and /dev/apm listener(s) are also counted. Users register their
approval or disapproval via Ack. If anyone disapproves, suspend is vetoed.
* Old user programs or kernel modules that used SETSLPSTATE continue to
work. A message is printed once that this interface is deprecated.
* acpiconf gains the -k flag to ack the suspend request. This flag is
undocumented on purpose since it's only used by /etc/rc.suspend. It is
not intended to be a permanent change and will be removed once a better
power API is implemented.
* S5 (power off) is no longer supported via acpiconf -s 5 or apm -z/-Z.
This restores previous behavior of halt/shutdown -p being the interface.
* Miscellaneous improvements to error reporting
Approved by: re
