However, IBSS merge will be performed only if a driver calls
ieee80211_ibss_merge(); so, this applicable to the ath(4) only.
Also, this should fix bug 167870.
PR: kern/199632
Submitted by: Andriy Voskoboinyk <s3erios@gmail.com>
This may happen on RUN -> SCAN -> RUN -> SCAN state transition:
1. RUN -> SCAN: in ieee80211_sta_join1(): iv_bss will be moved to obss,
refcnt will be reduced by 2 (default minimum).
Now, if old iv_bss have some extra references (for example, from
unacknowledged probe responses), it will not be freed and will stay
in the node table.
2. SCAN -> RUN.
3. If old iv_bss will not be deleted by the time when the next RUN -> SCAN
state transition occurs, then sta_leave() will reduce it's reference
counter once more. As a result, two last users will free it -> this will
lead to kernel panic.
In this patch old iv_bss entry is explicitly removed from the node table in
ieee80211_sta_join1() (as a result, it will not be processed by sta_leave()).
PR: kern/199676
Differential Revision: Andriy Voskoboinyk <s3erios@gmail.com>
History note: it's good to document what the driver expects like this even
if it's currently a no-op.
Submitted by: Andriy Voskoboinyk <s3erios@gmail.com>
Use the BCM2835_MBOX_CHAN_PROP mbox channel to setup the framebuffer,
remove DMA code (its now done in bcm2835_mbox.c).
Also adjust the color palette when bcm2708_fb.fbswap is set. The
firmware used on RPi 2 uses this mode.
Tested on: RPi-B and RPi 2 with 16, 24 and 32bpp
Note: The 32bpp mode on RPi-B has the red and blue swapped, this
is a know problem (not a driver problem).
Use the BCM2835_MBOX_CHAN_PROP mbox channel to setup the framebuffer,
remove unused code and unnecessary includes.
Adjust the color palette when bcm2708_fb.fbswap is set on /chosen/bootargs
node of DTB. The firmware used on RPi 2 uses this mode.
Tested on: RPi-B and RPi 2 with 16, 24 and 32bpp
BCM2835_MBOX_CHAN_PROP channel. The old channel (BCM2835_MBOX_CHAN_FB)
seems deprecated on recent firmware versions and is causing a freeze on
RPi 2.
The actual changes in the framebuffer drivers will follow in subsequent
commits.
since types became a enum C type. Some software uses such ifdefs to
determine whether an operating systems supports certain interface type.
Of course, such check is bogus. E.g. FreeBSD defines about 250 interface
types, but supports only around 20.
However, we need not upset such software so provide a set of defines. The
current set was taken to suffice the dhcpd.
Reported & tested by: Guy Yur <guyyur gmail.com>
in the main swapper work cycle, do it in the sysctl handler. This removes
extra mutex acquisition from the main cycle and makes the sysctl knob return
error on an invalid value, instead of accepting and fixing it.
Reviewed by: kib
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
