Summary:
Install's strip capability, by way of strip(1), doesn't seem to work
correctly on msdosfs, and instead ends up truncating the resulting
binary to 0-length. As a workaround, don't strip ubldr(8). This
fixes installworld on Book-E ubldr-based platforms, which prior to this
would need to manually install ubldr separately after installworld, in
order to have a functional ubldr.
The same thing could be done on PowerNV platforms that use msdosfs /boot
volumes, since loader and loader.kboot, etc, all get truncated to 0 on
install. However, PowerNV does not use loader, instead loading from
petitboot, so it's not really necessary at this time.
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D21725
This unbreaks using the powerpc64 loader on a 32-bit processor.
Approved by: jhibbits (mentor)
Differential Revision: https://reviews.freebsd.org/D21297
Guest PPC OSs running under a hypervisor may communicate the features they
support, in order for the hypervisor to expose a virtualized machine in the way
the client (guest OS) expects (see LoPAPR 1.1 - B.6.2.3).
This is done by calling the "/ibm,client-architecture-support" (CAS) method,
informing supported features in option vectors. Until now, FreeBSD wasn't
using CAS, but instead relied on hypervisor/QEMU's defaults.
The problem is that, without CAS, it is very inconvenient to run POWER9 VMs on
a POWER9 host running with radix enabled. This happens because, in this case,
the QEMU default is to present the guest OS a dual MMU (HPT/RPT), instead of
presenting a regular HPT MMU, as FreeBSD expects, resulting in an early panic.
The known workarounds required either changing the host to disable radix or
passing a flag to QEMU to run in a POWER8 compatible mode.
With CAS, FreeBSD is now able to communicate that it wants an HPT MMU,
independent of the host setup, which now makes FreeBSD work on POWER9/pseries,
with KVM enabled and without hugepages (support added in a previous commit).
As CAS is invoked through OpenFirmware's call-method interface, it needs to be
performed early, when OpenFirmware is still operational. Besides, now that FDT
is the default way to inspect the device tree on PPC, OFW call-method feature
will be unavailable by default, when control is passed to the kernel. Because
of this, the call to CAS is being performed at the loader, instead of at the
kernel.
To avoid regressions with old platforms, this change uses CAS only on
POWER8/POWER9.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D20827
It was pointed out that manually loading a .dtb to be used rather than
relying on platform-specific method for loading .dtb will result in overlays
not being applied. This was true because overlay loading was hacked into
fdt_platform_load_dtb, rather than done in a way more independent from how
the .dtb is loaded.
Instead, push overlay loading (for now) out into an
fdt_platform_load_overlays. This method easily allows ubldr to pull in any
fdt_overlays specified in the ub env, and omits overlay-checking on
platforms where they're not tested and/or not desired (e.g. powerpc). If we
eventually stop caring about fdt_overlays from ubenv (if we ever cared),
this method should get chopped out in favor of just calling
fdt_load_dtb_overlays() directly.
Reported by: Manuel Stühn (freebsdnewbie freenet de)
Summary:
Now that mpc85xx can boot via ubldr, move ubldr to a separate
filesystem, mounted on /boot/uboot, so that a fresh install can boot correctly.
Reviewed By: nwhitehorn
Differential Revision: https://reviews.freebsd.org/D18709
A foolish consistency is the hobgoblin of little minds, adored by
little statesmen and philosophers and divines. With consistency a
great soul has simply nothing to do. -- Ralph Waldo Emerson
than a pointer to Open Firmware by default. This eliminates a number of
potentially unsafe calls to firmware from the kernel and provides better
performance.
This feature is meant to be expanded until it is on by default
unconditionally and, ideally, we can then garbage-collect the
nightmare pile of hacks required to call into Open Firmware from a live
kernel.
Reviewed by: jhibbits
the powerpc/ subdirectory. These have never used by SPARC and we have
no other (and almost certainly will have no other) Open Firmware platforms.
This makes the directory structure simpler and lets us avoid some
cargo-cult MI patterns on code that is, and always was,
architecture-specific.
One does not simply convert to SUBDIR.yes in stand without making everything
else in the affected files SUBDIR.yes -- there are better ways to do this.
Use SUBDIR.${MK_*} where appropriate. r330248 eliminated most of the
offenders, sweep the rest under the rug.
Differential Revision: https://reviews.freebsd.org/D14545
For directories that don't many anything, add NO_OBJ=t just before we
include bsd.init.mk. This prevents them from creating an OBJ
directory. In addition, prevent defs.mk from creating the machine
related links in these cases. They aren't needed and break, at least
on stable, the read-only src tree build.
Summary:
All metadata.c files are very similar, with only trivial changes. Unify them
into a single common file, with minor special-casing where needed.
Reviewed By: imp
Differential Revision: https://reviews.freebsd.org/D13978
PowerPC Apple hardware, and likely all Open Firmware systems.
The loader would allocate memory for its heap at whatever address Open
Firmware gave it, which would in general be the lowest unallocated address,
usually starting a page or two above 0. As the kernel is linked at 1 MB,
and loader insists on running the kernel at its link address, any heap
larger than 1 MB would overlap the kernel, causing loader memory allocations
to corrupt the kernel and vice versa.
Although r328806 made this problem much worse by increasing the heap size
to 8 MB, causing 88% of the loader heap to overlap with the kernel, the
problem has always existed. The old heap size was 1 MB and, unless that
started exactly at zero, which would cause other problems, some number of
pages of the loader heap still overlapped with the kernel.
This patch solves the issue in two ways and cleans up some related code:
- Moves the loader heap inside of the loader. This guarantees that the
heap will be contiguous with the loader and simplifies the heap
allocation code at no cost, since the heap lives in BSS.
- Moves the loader, previously at 28 MB and dangerously close to the kernel
it loads, a bit higher to 44 MB. This has the effect of breaking loader
on non-embedded PPC machines with < 48 MB of RAM, but we did not support
those anyway.
The fundamental problem is that the way loader loads ELF files is
incredibly fragile, but that can't be fixed without fundamental
architectural changes.
MFC after: 10 days
preference to LIBFICL{,32}. LIBFICL{,32} are now always defined, but
LDR_INTERP{,32} is defined empty when building w/o forth (aka the
simple interpreter) and defined to LIBFICL{,32} when we are building
forth.
MK_CTF, MK_SSP, MK_PROFILE, NO_PIC, and INTERNALLIB are always the
same, so set them in defs.mk. MAN= is common, so set it here too.
This removes a lot of boring repetition from the Makefiles that added
almost no value.
On POWER8 with current petitpoot, the loader.kboot might be
run as little-endian application. The FreeBSD kernel is
always big-endian, so the load_elf_* routines must be aware
of proper endianness of all fields.
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: IBM, QCM Technologies
Differential revision: https://reviews.freebsd.org/D12422
removing this argument, and expanding when rc is NULL. This
effectively completes the back out of custom scripts for tftp booted
loaders from r269153 that was started in r292344 with the new path
tricks that obsoleted it.
Submitted by: Netflix
HELP_FILES is a loader only thing, so move it to loader.mk. Only
generate the help file if HELP_FILES is defined. Adjust Makefiles to
new convention. Fix a few cases where ${.CURDIR}/ was missing
resulting in missing bits from the help files.
Sponsored by: Netflix
Don't print when we can't find a file. Copy it instead to the error
buffer. Higher level routines determine if it's appropriate to print
the error message.
Also, remove dead code (labeled bogusly lost functionality) since we
never used that functionality. Remove unused arg from interact() too.
Sponsored by: Netflix
it's going to be removed soon anyway once the final lingering issues
with kboot are resolved. Go ahead and disconnect it from the build a
little early.
Sponsored by: Netflix
OK'd by: nathanw@
Only define the CFLAGS we need.
SSP_CFLAGS is now defined globally, no need to define it here.
Define -D_STANDALONE globally for src/stand builds.
Sponsored by: Netflix
Remove the now-useless dependency on ufsread.c. In some cases, it was
on the wrong file. But in all cases, we now automatically generate
.depend files, so we don't need it explicitly.
Sponsored by: Netflix
The host_open interface was a legitimate mismatch to the userboot
function, while the other pointers didn't need to be non-const.
This makes the powerpc warning free again.
Sponsored by: Netflix
magic number to the kernel in r7 rather than the (currently unused and
irrelevant) width of the metadata pointer, which I believe was intended
for a never-used approach to the 64-bit port. This enables the kernel,
in a future commit, to switch on the cookie to distinguish a real
metadata pointer from loader(8) from garbage left in r6 by some other
boot loader.
MFC after: 3 weeks
simd / no float stuff is centeralized here. Also centralise
-ffreestanding since it is specified everywhere.
This, along with a change to share/mk/bsd.cpu.mk to include -mno-avx2
in CFLAGS_NO_SIMD should fix building for newer machines (eg with
CPUTYPE=haswell) where clang was generating avx2 instructions.
Sponsored by: Netflix
