This will allow us to verify if passphrase and key is valid without
decrypting whole device.
Reviewed by: cem@, allanjude@
Differential Revision: https://reviews.freebsd.org/D15000
Do not build or install pf tests if WITHOUT_PF is set. This fixes the build
failure with WITHOUT_PF=yes.
Reported by: Vladimir Zakharov <zakharov.vv@gmail.com>
Some devices cannot rely on the switch MDIO address passed in the DTB
for specifying single/multi-chip addressing mode. Introduce new property
"single-chip-addressing" which added to DTS will force single-chip mode.
Submitted by: Michal Mazur <mkm@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D14800
Linux device tree binding, whose usage is obligatory,
comprises faulty representation of Marvell cryptographic
engine (CESA) - two engines are artificially gathered into
single DT node, in order to avoid certain SW limitation.
This patch improves the cesa driver to support above binding,
depending on compatible string, which helps to ensure
backward compatibility.
Submitted by: Patryk Duda
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D14760
The code now has a single, consistant flow for all three ioctl
variants. ifdefs and for pre-FreeBSD-7 compatability are moved to
functions and macros. So the flow is alwasy the same, we impose
the cost of allocating, copying to, updating from, and freeing a
copy of struct pci_conf_io on all paths.
This change will allow PCIOCGETCONF32 support currently in
sys/compat/freebsd32/freebsd32_ioctl.c to be moved here.
Reviewed by: kib, jhb
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14978
Change OF_getencprop_alloc semantics to be combination of malloc and
OF_getencprop and return size of the property, not number of elements
allocated.
For the use cases where number of elements is preferred introduce
OF_getencprop_alloc_multi helper function that copies semantics
of OF_getencprop_alloc prior to this change.
This is to make OF_getencprop_alloc and OF_getencprop_alloc_multi
function signatures consistent with OF_getencprop_alloc and
OF_getencprop_alloc_multi.
Functionality-wise this patch is mostly rename of OF_getencprop_alloc
to OF_getencprop_alloc_multi except two calls in ofw_bus_setup_iinfo
where 1 was used as a block size.
It's had a good life, but it's not really configurable and not really used.
Obtained from: opBSD (with some changes)
Differential Revision: https://reviews.freebsd.org/D14991
Previously linuxulator had three identical copies of
linux_exec_imgact_try. Deduplicate before adding another arch to
linuxulator.
Sponsored by: Turing Robotic Industries Inc
Differential Revision: https://reviews.freebsd.org/D14856
Split out delay parsing into a separate function; we'll support both
{tx,rx}-delay as well as the new versions.
While here, validate that they're within the expected range and fail to
attach if they are not. Assuming that we can clamp the delay is a bad idea
that might result in a non-working awg anyways, so we'll fail early to make
it easier to catch.
This version also unsets the tx and rx delay registers unconditionally and
then sets them if we read a non-zero delay. These delay properties should
default to 0 if not specified, as declared in the binding documentation.
Presumably the delays will be set via hardware configuration if they're not
explicitly set in FDT.
Changelist:
- remove unused nkr_slot_flags
- new nm_intr adapter callback to enable/disable interrupts
- remove unused sysctls and document the other sysctls
- new infrastructure to support NS_MOREFRAG for NIC ports
- support for external memory allocator (for now linux-only),
including linux-specific changes in common headers
- optimizations within netmap pipes datapath
- improvements on VALE control API
- new nm_parse() helper function in netmap_user.h
- various bug fixes and code clean up
Approved by: hrs (mentor)
OF_getprop_alloc takes element size argument and returns number of
elements in the property. There are valid use cases for such behavior
but mostly API consumers pass 1 as element size to get string
properties. What API users would expect from OF_getprop_alloc is to be
a combination of malloc + OF_getprop with the same semantic of return
value. This patch modifies API signature to match these expectations.
For the valid use cases with element size != 1 and to reduce
modification scope new OF_getprop_alloc_multi function has been
introduced that behaves the same way OF_getprop_alloc behaved prior to
this patch.
Reviewed by: ian, manu
Differential Revision: https://reviews.freebsd.org/D14850
from userland without the need to use sysctls, it allows the old
sysctls to continue to function, but deprecates them at
FreeBSD_version 1200060 (Relnotes for deprecate).
The command line of bhyve is maintained in a backwards compatible way.
The API of libvmmapi is maintained in a backwards compatible way.
The sysctl's are maintained in a backwards compatible way.
Added command option looks like:
bhyve -c [[cpus=]n][,sockets=n][,cores=n][,threads=n][,maxcpus=n]
The optional parts can be specified in any order, but only a single
integer invokes the backwards compatible parse. [,maxcpus=n] is
hidden by #ifdef until kernel support is added, though the api
is put in place.
bhyvectl --get-cpu-topology option added.
Reviewed by: grehan (maintainer, earlier version),
Reviewed by: bcr (manpages)
Approved by: bde (mentor), phk (mentor)
Tested by: Oleg Ginzburg <olevole@olevole.ru> (cbsd)
MFC after: 1 week
Relnotes: Y
Differential Revision: https://reviews.freebsd.org/D9930
Summary:
This code adds the basic infrastructure for the facility subsystem. A facility
trap is raised when an unavailable instruction is executed. One example is
executing a Hardware Transactional Memory instruction while the MSR[TM] is
disabled. In the past, there was a specific interrupt for it (FP, VEC), but the
new instructions seem to be multiplexed on this facility interrupt.
The root cause of the trap is provided on Facility Status and Control Register
(FSCR) register.
Submitted by: Breno Leitao
Reviewed by: nwhitehorn
Differential Revision: https://reviews.freebsd.org/D14566
Summary:
Print current MSR on printtrap(). Currently, printtrap just prints srr1, which
contains part of the MSR prior to the exception. I find useful to dump the
current value of the MSR, since it changes when there is an interruption.
With this patch, this is the new printtrap model:
handled user trap:
exception = 0x700 (program)
srr0 = 0x100008a0 (0x100008a0)
srr1 = 0x800000000002f032
current msr = 0x8000000000009032
lr = 0x1000089c (0x1000089c)
curthread = 0x7a50000
pid = 714, comm = ttrap2
Submitted by: Breno Leitao
Reviewed by: nwhitehorn
Differential Revision: https://reviews.freebsd.org/D14600
Summary:
It is not necessary to call isync() after calling mtmsr() function, mainly
because the mtmsr() calls 'isync' internally to synchronize the machine state
register. Other than that, isync() just calls the 'isync' instruction, thus,
the 'isync' instruction is being called twice, and that seems to be unnecessary.
This patch just remove the unecessary calls to isync() after mtmsr().
Submitted by: Breno Leitao
Differential Revision: https://reviews.freebsd.org/D14583
Summary:
Currently ofw_real_bounce_alloc() is requesting memory, using WAITOK, holding a
non-sleepable locks, called 'OF Bounce Page'.
Fix this by allocating the pages outside of the lock, and only updating the
global variables while holding the lock.
Submitted by: Breno Leitao
Differential Revision: https://reviews.freebsd.org/D14955
Previous limits were chosen when locking primitives had spurious lock
accesses.
Flipping the starting point to 1 (or rather 2 as the first call shifts it)
provides a modest win when mild contention is seen while not hurting worse
cases. Tested on a bunch of one, two and four socket old and new systems
(Westmere, Skylake, Threadreaper and others) by doing concurrent page faults,
buildkernel/buildworld and other stuff (although not all systems got all the
tests).
Another thing is the upper limit. It is semi-arbitrarily chosen as it was
getting out of hand for slightly less small systems (e.g. a 128-thread one).
Note that backoff is fundamentally a speculative bandaid and this change just
makes it fit a little bit better. It remains completely oblivious to the
hardware topology or the contention pattern. This is being experimented with.
to a read-write descriptor. Do not close the read-only descriptor until
the read-write is successfully obtained. Before this fix, a failed upgrade
left no usable descriptor with which to work.
main.c - opens disk and processes the argument list
of inodes to be printed
prtblknos.c - prints out the list of blocks used by an inode
This change allows the fsdb program to import prtblknos() to use when
printing out the set of blocks used by an inode.
This program was switched to using the libufs library to ease its
integration with fsdb and any other filesystem utility that might
want to use it in the future.
