Commit Graph

428 Commits

Author SHA1 Message Date
Matt Jacob
8b8e73049d Protect against deranged fabric nameservers that spit out 10000 identical
port numbers.

MFC after:	1 day
2001-10-18 17:26:52 +00:00
Matt Jacob
1c3749836f Add some somewhat vague documentation for this driver and a list
of Hardware that might, in fact, work.
2001-10-07 18:26:47 +00:00
Matt Jacob
71793c0dc4 Some patches from Doug for ia64 support- the principle one being the
appropriate cache flush that provides MEMORY_BARRIER in between handoffs
between host && RISC processor for the shared memory request/response
queues.

Submitted by:	dfr@nlsystems.com
2001-10-07 18:18:50 +00:00
Matt Jacob
cd37f56f5a Misunderstanding documentation caused me to try and set 1Gbps/2Gps/Auto
connection speed for the 2300 in the wrong offset in the ICB. Oops.

Respect some QLogic errat wrt PCI errors on certain shared host/RISC registers.
2001-10-06 20:41:18 +00:00
Matt Jacob
3bd4033010 Whups- remember to zero the isr pointer arg. 2001-10-06 19:34:43 +00:00
Matt Jacob
db4fa023f8 Respect QLogic's errata- read BIU_ISR even on the 2300
to see if there's an interrupt (avoids PCI parity errors
which can occur on the 2312 if you access some registers
from the host at the same time the RISC on the 2312 is
C accessing them).

MFC after:	1 day
2001-10-06 19:19:24 +00:00
Matt Jacob
53036e9289 Begin to implement target mode that for Fibre Channel has a private
per-command component that we *don't* try and pass thru CAM. CAM just
is too risky and too much of a pain- structures get copied, but not
all info of interest can be considered safely transported thru all
consumers (including user space) from the incoming ATIO to the outgoing
CTIO- it's just much safer to have a buddy structure, identified by the
command's tag which *does* make it thru safely.

Pay attention to link speed and report 200MB/s xfer speed for a
23XX card in 2GPs mode.

MFC after:	1 week
2001-10-01 03:48:42 +00:00
Matt Jacob
c507669af4 Implement a call to get the actual link data rate (if 23XX) so we can
set whether it's a 2Gps or 1Gps link.

MFC after:	1 week
2001-10-01 03:45:54 +00:00
Matt Jacob
83548830a7 When calling isp_reset, set the request/response in/out pointers all at
once so there isn't a window with the ones for the 23XX cards being wrong.

When being verbose, print out some more FC NVRAM values (like framesize).

MFC after:	1 week
2001-09-29 19:37:49 +00:00
Julian Elischer
b40ce4165d KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00
Matt Jacob
64edff948b I don't know what I was thinking- if I have two separate busses on on
SIM (as is true for the 1280 and the 12160), then I have to have separate
flags && status for *both* busses. *Whap*.

Implement condition variables for coordination with some target mode
events. It's nice to use these and not panic in obscure little places
in the kernel like 'propagate_priority' just because we went to sleep
holding a mutex, or some other absurd thing.

Remove some bogus ISP_UNLOCK calls. *Whap*.

No longer require that somebody do a lun enable on the wildcard device
to enable target mode. They are, in fact, orthogonal. A wildcard open
is a statement that somebody upstream is willing to accept commands which
are otherwise unrouteable. Now, for QLogic regular SCSI target mode, this
won't matter for a damn because we'll never see ATIOs for luns we haven't
enabled (are listening for, if you will). But for SCCLUN fibre channel
SCSI, we get all kinds of ATIOs. We can either reflect them back here
with minimal info (which is isp_target.c:isp_endcmd() is for), or the
wildcard device (nominally targbh) can handle them.

Do further checking against firmware attributes to see whether we can,
in fact, support target mode in Fibre Channel. For now, require SCCLUN
f/w to supoprt FC target mode.

This is an awful lot of change, but target mode *still* isn't quite right.

MFC after:	4 weeks
2001-09-04 21:53:12 +00:00
Matt Jacob
23ac1fce7b Note for ATIOs returned because of BDRs or Bus Resets for which bus this
applies to.  Do more bus # foo things.

Acknowledge Immediate Notifies right away prior to throwing events upstream
(where they're currently being ignored, *groan*)

Capture ASYNC_LIP_F8 as with ASYNC_LIP_OCCURRED. Don't percolate them
upstream as if they were BUS RESETS- they're not.
2001-09-04 21:48:02 +00:00
Matt Jacob
b96934e89a If we're on an interrupt stack, mark things so that we don't try
and cv_wait for mailbox commands to complete if we start them from
here.

Fix residuals for target mode such that we only check the residual and
set it in the CTIO if this is the last CTIO (when we're sending status).

MFC after:	4 weeks
2001-09-04 21:45:57 +00:00
Matt Jacob
f6a3bcf86c I don't know what I was thinking- if I have two separate busses on on
SIM (as is true for the 1280 and the 12160), then I have to have separate
flags && status for *both* busses. *Whap*.

Implement condition variables for coordination with some target mode
events. It's nice to use these and not panic in obscure little places
in the kernel like 'propagate_priority' just because we went to sleep
holding a mutex, or some other absurd thing.

MFC after:	4 weeks
2001-09-04 21:33:06 +00:00
Matt Jacob
2332ac8c61 Fix SET_IID_VAL/SET_BUS_VAL macros to usable.
MFC after:	4 weeks
2001-09-04 19:42:13 +00:00
Matt Jacob
d82b6503a9 Because we now store SCCLUN capabilities in firmware attributes, get
rid of the silly test of isp_maxluns > 16 and use the attibutes directly.

MFC after:	4 weeks
2001-09-03 03:12:10 +00:00
Matt Jacob
181640a81c Clarify issues about whether we have SCCLUN (65535 luns) or non-SCCLUN (16
luns) firmware for the Fibre Channel cards.

We used to assume that if we didn't download firmware, we couldn't know
what the firmware capability with respect to SCCLUNs is- and it's important
because the lun field changes in the request queue entry based upon which
firmware it is.

At any rate, we *do* get back firmware attributes in mailbox register 6
when we do ABOUT FIRMWARE for all 2200/2300 cards- and for 2100 cards
with at least 1.17.0 firmware. So- we now assume non-SCCLUN behaviour
for 2100 cards with firmware < 1.17.0- and we check the firmware attributes
for other cards (loaded firmware or not).

This also allows us to get rid of the crappy test of isp_maxluns > 16-
we simply can check firmware attributes for SCCLUN behaviour.

This required an 'oops' fix to the outgoing mailbox count field for
ABOUT FIRMWARE for FC cards.

Also- while here, hardwire firmware revisions for loaded code for SBus
cards. Apparently the 1.35 or 1.37 f/w we've been loading into isp1000
just doesn't report firmware revisions out to mailbox regs 1, 2 and 3
like everyone else. Grumble. Not that this fix hardly matters for FreeBSD.

MFC after:	4 weeks
2001-09-03 03:09:48 +00:00
Matt Jacob
f8597b62e5 Add some more firmware revision macros. Add firmware attributes field
to fcparam structure.
MFC after:	4 weeks
2001-09-03 03:03:32 +00:00
Matt Jacob
126ec86486 Add 2 Gigabit Fibre Channel support (2300 && 2312 cards). This required
some reworking (and consequent cleanup) of the interrupt service code.

Also begin to start a cleanup of target mode support that will (eventually)
not require more inforamtion routed with the ATIO to come back with the
CTIO other than tag.

MFC after:	4 weeks
2001-08-31 21:39:04 +00:00
Matt Jacob
ed4bea259e Clean up some ways in which we set defaults for SCSI cards
that do not have valid NVRAM. In particular, we were leaving
a retry count set (to retry selection timeouts) when thats
not really what we want. Do some constant string additions
so that LOGDEBUG0 info is useful across all cards.

MFC after:	2 weeks
2001-08-20 17:28:32 +00:00
Matt Jacob
dec1985672 Add MBOX_GET_PCI_PARAMS alias.
MFC after:	2 weeks
2001-08-20 17:26:45 +00:00
Matt Jacob
169ad8cfef oops- typo in a previous commit 2001-08-16 17:39:45 +00:00
Matt Jacob
561e7bb942 Fix a spelling error in a comment. 2001-08-16 17:31:27 +00:00
Matt Jacob
dda035d1fc Add more MBOX and ASYNC event defines.
MFC after:	2 weeks
2001-08-16 17:26:03 +00:00
Matt Jacob
be534d5f1a Thanks to PHK for spotting: ISPASYNC_UNHANDLED_RESPONSE not
handle in isp_async.
2001-08-16 17:25:41 +00:00
Matt Jacob
50719f7521 Enable LIP F8, LIP Reset async events.
Be more chatty about SNS failures. Fix
typo for skipped phase mesage. Correct
MBOX_GET_PORT_QUEUE_PARAMS options in
table.

MFC after:	2 weeks
2001-08-16 17:25:08 +00:00
Matt Jacob
d51456f800 Oops- don't set 'goal' twice when you mean to set 'nvrm' as well.
This breaks bogus NVRAM boards.

MFC after:	1 day
2001-08-02 00:34:56 +00:00
Matt Jacob
9ce9bdaf8a Redo how we manage SCSI device settings- have a 3rd flags (nvram) that records
either what's in NVRAM or what the safe defaults would be if we lack NVRAM.
Then we rename cur_XXXX to actv_XXXX (these are the currently active settings)
and the dev_XXX settings to goal_XXXX (these are the settings which we want
cur_XXXX to converge to).

This probably isn't entirely final as yet- but it's a lot closer to now
being what it should be, including allowing camcontrol to actually set
specific settings.
2001-07-30 01:00:21 +00:00
Matt Jacob
d9c272f3ea Redo how we manage SCSI device settings- have a 3rd flags (nvram) that records
either what's in NVRAM or what the safe defaults would be if we lack NVRAM.
Then we rename cur_XXXX to actv_XXXX (these are the currently active settings)
and the dev_XXX settings to goal_XXXX (these are the settings which we want
cur_XXXX to converge to).

Roll core minor.
2001-07-30 00:59:32 +00:00
Matt Jacob
df225582bf Redo how we manage SCSI device settings- have a 3rd flags (nvram) that records
either what's in NVRAM or what the safe defaults would be if we lack NVRAM.
Then we rename cur_XXXX to actv_XXXX (these are the currently active settings)
and the dev_XXX settings to goal_XXXX (these are the settings which we want
cur_XXXX to converge to).
2001-07-30 00:59:06 +00:00
Matt Jacob
f44257c29a Remove ISP_SMPLOCK stuff- we're just using locking now.
Correctly reintroduce loop_seen_once semantics- that is, if we've never
seen good link, start bouncing commands with CAM_SEL_TIMEOUT. But we
have to be careful to have let ourselves try (in isp_kthread) to check
for loop up at least once.

PR:		28992
MFC after:	1 week
2001-07-25 04:23:52 +00:00
Matt Jacob
3910362ab8 Roll minor version. Remove ISP_SMPLOCK nonsense. We're using full locking,
and that's final.

MFC after:	1 week
2001-07-25 04:21:53 +00:00
Matt Jacob
761d6b7150 Hmm. Let's try this on for size...
We originally had it such that if the connection topology was FL-loop
(public loop), we never looked at any local loop addresses. The reason
for not doing that was fear or concern that we'd see the same local
loop disks reflected from the name server and we'd attach them twice.

However, when I recently hooked up a JBOD and a system to an ANCOR SA-8
switch, the disks did *not* show up on the fabric. So at least the
ANCOR is screening those disks from appearing on the fabric. Now, it's
possible this is a 'feature' of the ANCOR. When I get a chance, I'll
check the Brocade (it's hard to do this on a low budget).

In any case, if they *do* also show up on the fabric, we should
simply elect to not log into them because we already have an
entry for the local loop. There is relatively unexercised code
just for this case.

MFC after:	2 weeks
2001-07-11 02:34:21 +00:00
Matt Jacob
8e6a12fcad Oops- missed a CAMLOCK_2_ISP case. 2001-07-05 19:34:06 +00:00
Matt Jacob
45c9a36af5 Things have become cinched down more tightly about assertions for Giant.
This uncovered some missing spots where I trade off between isp's lock
and Giant as I enter CAM.
2001-07-05 17:14:57 +00:00
Matt Jacob
ab163f5fee Add CAM_NEW_TRAN_CODE support. Use correct CAMLOCK_2_ISPLOCK macros.
For fibre channel, start going for the gusto and using AC_FOUND_DEVICE
and AC_LOST_DEVICE calls to xpt_async when devices appear and disappear
as the loop or fabric changes.

ISPASYNC_FW_CRASH is the async event code where the platform layer
deals with a firmware crash.
2001-07-04 18:54:29 +00:00
Matt Jacob
9927912756 Macroize request/response in/out queue pointer access. 2001-07-04 18:52:23 +00:00
Matt Jacob
559a1ad2c1 Some possibly helpful casts. 2001-07-04 18:51:58 +00:00
Matt Jacob
f0f4c8ae4b Add a microcomment about how you'd use ispds64_t or ispdlist_t
for CTIO3/CTIO4 entries.
2001-07-04 18:51:06 +00:00
Matt Jacob
1ee34f05dd Add a bunch of additional defines for completion codes. Define
some of the RIO (reduced interrupt operation) stuff. Add 64 bit
data list (DSD type 1) and arbitrary data list (DSD type 2)
data structure defines.

Add macros that parameterize usage of the Request/Response in/out
queue pointers. When we finish 2300 support, different registers
will be accessed for the 2300.
2001-07-04 18:49:00 +00:00
Matt Jacob
b91862efef Firmware crashes handled in platform specific code (isp_async call).
Fix longstanding silly buglet that left a hole in the debug log defines.
2001-07-04 18:46:50 +00:00
Matt Jacob
9b9288ec4a More 2300 support prep- the Request/Response in/out pointers are
part of the PCI block for the 2300- not software convention usage
of the mailbox registers- so we macrosize in/out pointer usage.

Only report that a LIP destroyed commands if it actually destroyed
commands. Get the chan/tgt/lun order correct.  Fix a longstanding
stupid bug that caused us to try and issue a command with a tag on
Channel B because we were checking the tagged capability for the
target against Channel A.

A firmware crash is now vectored out to platform specific code
as an async event.

Some minor formatting tweaks.
2001-07-04 18:42:41 +00:00
Peter Wemm
22941bd78f Fix warnings:
554: passing arg 4 of `resource_string_value' from incompatible pointer type
576: passing arg 4 of `resource_string_value' from incompatible pointer type
593: passing arg 4 of `resource_string_value' from incompatible pointer type
2001-06-15 00:13:18 +00:00
Matt Jacob
cb62bc53d1 We've had problems with data corruption occuring on
commands that complete (with no apparent error) after
we receive a LIP. This has been observed mostly on
Local Loop topologies. To be safe, let's just mark
all active commands as dead if we get a LIP and we're
on a private or public loop.

MFC after:	4 weeks
2001-06-14 17:13:24 +00:00
Matt Jacob
6a23026c6e Fix botch for state levels. Role minor release. Start adding code for a
'force logout' path.

MFC after:	4 weeks
2001-06-05 17:11:06 +00:00
Matt Jacob
5d57194434 Spring MegaChange #1.
----

Make a device for each ISP- really usable only with devfs and add an ioctl
entry point (this can be used to (re)set debug levels, reset the HBA,
rescan the fabric, issue lips, etc).

----

Add in a kernel thread for Fibre Channel cards. The purpose of this
thread is to be woken up to clean up after Fibre Channel events
block things.  Basically, any FC event that casts doubt on the
location or identify of FC devices blocks the queues. When, and
if, we get the PORT DATABASE CHANGED or NAME SERVER DATABASE CHANGED
async event, we activate the kthread which will then, in full thread
context, re-evaluate the local loop and/or the fabric. When it's
satisfied that things are stable, it can then release the blocked
queues and let commands flow again.

The prior mechanism was a lazy evaluation. That is, the next command
to come down the pipe after change events would pay the full price
for re-evaluation. And if this was done off of a softcall, it really
could hang up the system.

These changes brings the FreeBSD port more in line with the Solaris,
Linux and NetBSD ports. It also, more importantly, gets us being
more proactive about topology changes which could then be reflected
upwards to CAM so that the periph driver can be informed sooner
rather than later when things arrive or depart.

---

Add in the (correct) usage of locking macros- we now have lock transition
macros which allow us to transition from holding the CAM lock (Giant)
and grabbing the softc lock and vice versa. Switch over to having this
HBA do real locking. Some folks claim this won't be a win. They're right.
But you have to start somewhere, and this will begin to teach us how
to DTRT for HBAs, etc.

--

Start putting in prototype 2300 support.  Add back in LIP
and Loop Reset as async events that each platform will handle.
Add in another int_bogus instrumentation point.

Do some more substantial target mode cleanups.

MFC after:	8 weeks
2001-05-28 21:20:43 +00:00
Matt Jacob
a1bc34c6b8 Redo a lot of the target mode infrastructure to be cognizant of Dual Bus
cards like the 1280 && the 12160. Cleanup isp_target_putback_atio.
Make sure bus and correct tag ids and firmware handles get propagated
as needed.
2001-04-04 21:58:29 +00:00
Matt Jacob
1209134a70 Roll platform minor.
Change target mode state definitions to be aware of 'channel' (for the
dualbus 1280/12160 cards).
2001-04-04 21:56:15 +00:00
Matt Jacob
e9a2738ad1 Complete some Ansification. Check to make sure, in tdma_mk, that we won't
overflow the request queue. The reason we want to do this is that we
now push out completed CTIOs as we complete them- this gets the QLogic
working on them quicker. So we need to know whether we can put the entire
burrito out before we start.

We now support conjoint status with data for the last CTIO for both Fibre
Channel and SCSI. Leave the old code in place in case we need to go back
(minor 3 line ifdef).

Ultra-ultra important- *don't* set rq->req_seg_count for non-data
target mode requests in isp_pci_dmasetup. D'oh- this is actually
the tag value area for a CTIO. What *was* I thinking? Boy howdy
does both aic7xxx and sym get awfully unhappy when on reconnect
you give them a constant '1' for a tag value.
2001-04-04 21:53:59 +00:00
Matt Jacob
b25bcef87a Perform some more Ansification. Remove and then replace the isp_putback_atio
function- we did it a bit cleaner. We only use this if a CTIO completes with
!CT_OK state. We now have managed to get away without having to poke around
and trying to find the original ATIO- the csio we're using has the tag_id
and lun values with it which is mostly what we need when we do the putback.

Make sure we correctly propagate AT_TQAE->CT_TQAE for tags. Make sure
we call ISP_DMAFREE only if we had DATA to move.
2001-04-04 21:49:51 +00:00
Matt Jacob
b5da7b232e Amazing. The bits to enable tagged queing in target mode, grok that a
tag is active for an ATIO, and say that you want to reconnect with
a tag value in a CTIO have *never* been exercised until now. This lossage
derived from Solaris code where this stuff originally came from that is
about 7 years old. Amazing.

We now bundle the incoming tag (legal values are 0..256) as the low
16 bits of the ccb_accept_tio's at_tagid while we put the firmware
handle for this ATIO in the top 16 bits- define some macros to make
this cleaner.

Complete some Ansification.
2001-04-04 21:46:48 +00:00
Matt Jacob
8055acd82d Add some target mode definitions and firmware (FC only) attribute definitions. 2001-04-04 21:44:10 +00:00
Matt Jacob
56f7a63a7a Ansification of source. 2001-04-04 21:43:43 +00:00
Matt Jacob
534bd9fecb After loading f/w, for FC cards print out Firmware Attributes.
Redo establishment of default SCSI parameters whether or not
we've been compiled for target mode. Unfortunately, the Qlogic
f/w is confused so that if we set all targets to be 'safe' (i.e.,
narrow/async), it will also then report narrow, async if we're
contacted in target mode from that target (acting in initiator
role). D'oh!

Fix ISPCTL_TOGGLE_TMODE to correctly enable the right channel for
dual channel cards. Add some more opcodes. Fix a stupid NULL
pointer bug.
2001-04-04 21:42:59 +00:00
John Baldwin
f34fa851e0 Catch up to header include changes:
- <sys/mutex.h> now requires <sys/systm.h>
- <sys/mutex.h> and <sys/sx.h> now require <sys/lock.h>
2001-03-28 09:17:56 +00:00
Matt Jacob
b72b15696c For parallel SCSI, let us now do status with the final CTIO. For the 1080,
I was hanging after sending a xfer CTIO and a status CTIO for a non-discon
INQUIRY- the xfer CTIO was returned as completed OK, but the status CTIO
was dropped on the floor. All the fields looked good. I don't know why
it got dropped. But allowing status to go back with data xfer seemed to
work. I also noticed that with a non-disconnecting command that the
firmware handle in the ATIO is zero- this leads me to believe that the
f/w really can only handle one CTIO at a time in the discon case, and
it had no idea what to do with the second (status) CTIO.
2001-03-21 00:49:37 +00:00
Matt Jacob
290dc24b4d Check CT2_SENDSTATUS/CT_SENDSTATUS against cto->ct_flags, not
CAM_SEND_STATUS. Set a timeout of 2 seconds per CTIO. Make sure
that the 'real' tag value is being checked against- not the
one that also carries the firmware handle.
2001-03-21 00:46:44 +00:00
Matt Jacob
b0bd9b71f2 Clean up usage- ct_reserved is really ct_syshandle now. 2001-03-14 04:14:58 +00:00
Matt Jacob
f5a4462713 First cut of target mode swizzling for non-little endian machines.
It's probably wrong but it's a start.
2001-03-14 04:14:22 +00:00
Matt Jacob
75f7d77928 Mote that how the pad bytes can be divided in half and used by either
the target mode code or outer layers.

Increase cd_tagval to be 32 bits since it will have to now carry 16
bits of parallel SCSI ATIO handle as well as a normal tag (if any).
2001-03-14 04:13:30 +00:00
Matt Jacob
e2ec5cf0f9 In order to save ourselves grief with the SUNPRO compiler under
Solaris (which, for reasons unknown to me, chokes on u_int16_t
as a typedef of unsigned short if used in a transitional (mixed K&R
and ANSI) way), we'll go the extra mile and fully ANSIfy things.
2001-03-14 04:11:56 +00:00
Matt Jacob
d8d5f2adc5 more 32 to 16 bit handle conversions 2001-03-04 18:42:51 +00:00
Matt Jacob
24d52eb7b5 More 32 to 16 bit handle stuff. Roll core minor version. 2001-03-04 18:42:23 +00:00
Matt Jacob
3bfa867765 Remove a superfluous newline in a string (isp_prt adds this).
Fix a missed conversion of 32 to 16 bit handles.
2001-03-04 18:41:23 +00:00
Matt Jacob
5f5aafe1fc Switch to using 16 bit handles instead of 32 bit handles.
This is a pretty invasive change, but there are three good
reasons to do this:

1. We'll never have > 16 bits of handle.
2. We can (eventually) enable the RIO (Reduced Interrupt Operation)
bits which return multiple completing 16 bit handles in mailbox
registers.
3. The !)$*)$*~)@$*~)$* Qlogic target mode for parallel SCSI spec
changed such that at_reserved (which was 32 bits) was split into
two pieces- and one of which was a 16 bit handle id that functions
like the at_rxid for Fibre Channel (a tag for the f/w to correlate
CTIOs with a particular command). Since we had to muck with that
and this changed the whole handler architecture, we might as well...

Propagate new at_handle on through int ct_fwhandle. Follow
implications of changing to 16 bit handles.

These above changes at least get Qlogic 1040 cards working in target
mode again. 1080/12160 cards don't work yet.

In isp.c:
Prepare for doing all loop management in outer layers.
2001-03-02 06:28:55 +00:00
Matt Jacob
715ec7e9a7 Fix isp_print_qentry to print all four lines- it's been broken for months. 2001-03-02 04:48:41 +00:00
Mark Murray
ed34d0ade2 Turn on interrupt-entropy harvesting for all/any mass storage devices
I could find. I have no doubt missed a couple.

Interrupt entropy harvesting is still conditional on the
kern.random.sys.harvest_interrupt sysctl.
2001-03-01 17:09:09 +00:00
Matt Jacob
6e5c5328c4 Eliminate the use of the getenv_int stuff we'd been using (with a bitmap
for selecting unit). Instead, use the resource hints mechanism.

One unfortunate situation here is that there is no resource_quad_value
function- which is what I needed for WWN boot time replacement. Worse-
you can't store the hint as just plain

hint.isp.0.nodewwn="0x50000000aaaa0001"

because this gets interpreted as an int- incorrectly because it can't
be converted to an int. I can't even get this as a string. To work
around this particular case for nodewwn && portwwn setting, this
rather grotesque form will be used:

hint.isp.0.nodewwn="w50000000aaaa0001"
hint.isp.0.portwwn="w50000000aaaa0002"

At the same time, if we have no hinted WWN, set the default WWN (which, btw,
gets overridden if the card has valid NVRAM, which is usual) to
0x400000007F000009ull (which translates to NAA == IPv4, 127.0.0.9).

Eliminate more printf's and replace them either with device_printf or
isp_prt calls.
2001-03-01 02:21:36 +00:00
Matt Jacob
c9a6d60b09 Go to a default port and default node wwn model. Eliminate isp_name
and isp_unit and just store the device_t, fer gosh sakes.... Include
sys/bus.h for use by isp_pci.c.
2001-03-01 02:15:58 +00:00
Matt Jacob
3c75bb14be Finally eliminate as many of the printf calls as possible (still leaving
ones where we have a CAM path) and replacing them with calls to isp_prt.,

Eliminate isp_unit references- we no longer have an isp_unit- we now
have an isp_dev that device_get_unit can work with.
2001-03-01 02:14:54 +00:00
Matt Jacob
b0a3ba7e28 Fix at2_entry_t to reflect what the firmware actually writes (instead
of just deriving from SCSI at_entry_t). In this case, there is no
'suggested sense' for FC cards.
2001-02-27 00:14:39 +00:00
Matt Jacob
4102f2f6ef Fix a longstanding bug- we had the sense of what bit 14
for the ICB firmware options meant- *I* had taken it to
mean that if you set it, Node Name would be ignored and
derived from Port Name. Actually, it meant the opposite.
As a consequence- change ICBOPT_USE_PORTNAME to the
define ICBOPT_BOTH_WWNS- makes more sense.

Fix wrong input bitmap for MBOX_DUMP_RAM command. Call
ISP_DUMPREGS if we get a f/w crash. Add ISPCTL_RUN_MBOXCMD
control command (so outer layers can run a mailbox command
directly) and add a ISPASYNC_UNHANDLED_RESPONSE hook so
outer layers can understand response queue entries we
might not know about.
2001-02-23 05:35:50 +00:00
Matt Jacob
410b556714 Eliminate ISP2100_FABRIC- we always allow for fabric now. Add an
isp_iid_set/isp_iid for fibre channel- this is because we now
fake a port database entry for ourselves. Add the additional loop
states between LOOP_PDB_RCVD and LOOP_READY.

Change and comment on a wad of Fibre Channel isp_control functions.
Change and comment on some of the ISPASYNC Fibre Channel events.
2001-02-11 03:56:48 +00:00
Matt Jacob
b21d3f4ef8 Add structure defining FC-AL position maps. The only tool that I know of
that really uses this is luxadm(8) under Solaris.
2001-02-11 03:53:58 +00:00
Matt Jacob
b9b599fe4c Shuffle around how we do isp_disable management- make sure we return 0 so
the unit number doesn't get reused.

Make sure that if we've compiled for ISP_TARGET_MODE we set the
default role to be ISP_ROLE_INITIATOR|ISP_ROLE_TARGET.

Do some misc other cleanups.
2001-02-11 03:53:23 +00:00
Matt Jacob
6b528b1a1e Add isp_fc_runstate function- this function's purpose is to, in stages,
and depending on role, make sure link is up, scan the fabric (if we're
connected to a fabric), scan the local loop (if appropriate), merge
the results into the local port database then, check once again
to make sure we have f/w at FW_READY state and the the loopstate
is LOOP_READY.
2001-02-11 03:52:04 +00:00
Matt Jacob
250bc0aa8b Roll minor version. Remove ISP2100_FABRIC define (unneeded now).
Comment out usage of ISP_SMPLOCK- I have my doubts that this works sanely
as yet because CAM itself still needs Giant. I *was* dropping my lock
and grabbing Giant when doing the upcall for completion, but this is all
seems ridiculous until CAM is fixed.
2001-02-11 03:48:54 +00:00
Matt Jacob
d6e5500f27 Do some cleanup based upon adapter role- mainly not enabling interrupts
if we're ISP_ROLE_NONE. Change ISPASYNC_LOGGED_INOUT to ISPASYNC_PROMENADE.
Make sure we note if something is a fabric device.

Target mode:
Finally fix (to a first approximation) SCSI Target Mode again- we needed
to correctly check against CAM_TARGET_WILDCARD and CAM_LUN_WILDCARD
so that targbh won't confuse us. Comment out the drainqueue stuff for
now. Use isp_fc_runstate instead if isp_control/ISPCTL_FCLINK_TEST.
2001-02-11 03:47:39 +00:00
Matt Jacob
b2b4adaa33 Minor stuff:
Remove ISP2100_FABRIC defines- we always handle fabric now. Insert
isp_getmap helper function (for getting Loop Position map). Make
sure we (for our own benefit) mark req_state_flags with RQSF_GOT_SENSE
for Fibre Channel if we got sense data- the !*$)!*$)~*$)*$ Qlogic
f/w doesn't do so. Add ISPCTL_SCAN_FABRIC, ISPCTL_SCAN_LOOP, ISPCTL_SEND_LIP,
and ISPCTL_GET_POSMAP isp_control functions. Correctly send async notifications
upstream for changes in the name server, changes in the port database, and
f/w crashes. Correctly set topology when we get a ASYNC_PTPMODE event.

Major stuff:
Quite massively redo how we handle Loop events- we've now added several
intermediate states between LOOP_PDB_RCVD and LOOP_READY. This allows us
a lot finer control about how we scan fabric, whether we go further
than scanning fabric, how we look at the local loop, and whether we
merge entries at the level or not. This is the next to last step for
moving managing loop state out of the core module entirely (whereupon
loop && fabric events will simply freeze the command queue and a thread
will run to figure out what's changed and *it* will re-enable the queu).
This fine amount of control also gets us closer to having an external
policy engine decide which fabric devices we really want to log into.
2001-02-11 03:44:43 +00:00
Bosko Milekic
9ed346bab0 Change and clean the mutex lock interface.
mtx_enter(lock, type) becomes:

mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks)
mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized)

similarily, for releasing a lock, we now have:

mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN.
We change the caller interface for the two different types of locks
because the semantics are entirely different for each case, and this
makes it explicitly clear and, at the same time, it rids us of the
extra `type' argument.

The enter->lock and exit->unlock change has been made with the idea
that we're "locking data" and not "entering locked code" in mind.

Further, remove all additional "flags" previously passed to the
lock acquire/release routines with the exception of two:

MTX_QUIET and MTX_NOSWITCH

The functionality of these flags is preserved and they can be passed
to the lock/unlock routines by calling the corresponding wrappers:

mtx_{lock, unlock}_flags(lock, flag(s)) and
mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN
locks, respectively.

Re-inline some lock acq/rel code; in the sleep lock case, we only
inline the _obtain_lock()s in order to ensure that the inlined code
fits into a cache line. In the spin lock case, we inline recursion and
actually only perform a function call if we need to spin. This change
has been made with the idea that we generally tend to avoid spin locks
and that also the spin locks that we do have and are heavily used
(i.e. sched_lock) do recurse, and therefore in an effort to reduce
function call overhead for some architectures (such as alpha), we
inline recursion for this case.

Create a new malloc type for the witness code and retire from using
the M_DEV type. The new type is called M_WITNESS and is only declared
if WITNESS is enabled.

Begin cleaning up some machdep/mutex.h code - specifically updated the
"optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN
and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently
need those.

Finally, caught up to the interface changes in all sys code.

Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
Jeroen Ruigrok van der Werven
f09deb6962 Fix typo: wierd -> weird.
There is no such thing as wierd in the english language.
2001-02-06 09:25:10 +00:00
Matt Jacob
d69a5f7d9c Guard against overflow of the calculated timeout value. 2001-01-16 07:15:36 +00:00
Matt Jacob
7afb656f3f Add was_fabric_dev/fabric_dev tags to our local FC database structure
(so we can see rapidly whether something was a fabric device but is
now gone).

Add a tag which says what role this adapter should take. It can take
on the value of None, Target, Initiator or Both. None is useful for
warm failover purposes. Remove the ISP_CFG_NOINIT silliness since
a role of "None" does this.

Add a isp_lastmbxcmd tag to store the opcode for the last mailbox
command used.
2001-01-15 18:40:37 +00:00
Matt Jacob
144ff11903 Put in offset definitions for FPM and FBM registers, plus just enough
bits defined so we can reset them.
2001-01-15 18:37:14 +00:00
Matt Jacob
df1590c05d Set default adapter role. 2001-01-15 18:36:39 +00:00
Matt Jacob
fe4a3254ce Use the isp_lastmbxcmd tag to report timed out mailbox commands.
Arrrggghhhh! Very likely fix 22650 by remembering to, ahem, set
CAM_AUTOSNS_VALID when one has sense data.
2001-01-15 18:36:09 +00:00
Matt Jacob
70d2cccebd Do more cleanup of the usage of 0..125 for F-port topologies. 2001-01-15 18:34:49 +00:00
Matt Jacob
6677e7f89e When resetting the Qlogic 2X00 units, reset the FPM (Fibre Protocol
Module) and FBM (Fibre Buffer Modules). Also remember to clear the
semaphore registers. Tell the RISC processor to not halt on FPM
parity errors.

Throw out the ISP_CFG_NOINIT silliness and instead go to the use of
adapter 'roles' to see whether one completes initialization or not
(mostly for Fibre Channel). The ultimate intent, btw, of all of this
is to have a warm standby adapter for failover reasons.  Because
we do roles now, setting of Target Capable Class 3 service parameters
in the ICB for the 2x00 cards reflects from role. Also, in isp_start,
if we're not supporting an initiator role, we bounce outgoing commands
with a Selection Timeout error. Also clean out the TOGGLE_TMODE
goop for FC- there is no toggling of target mode like there is
for parallel SCSI cards.

Do more cleanup with respect to using target ids 0..125 in F-port
topologies. Also keep track of things which *were* fabric devices
so that when you rescan the fabric you can notify the outer layers
when fabric devices go away.

Only force a LOGOUT for fabric devices if they're still logged in
(i.e., you cat their Port Database entry. Clean up the Get All Next
scanning.

Finally, use a new tag in the softc to store the opcode for the
last mailbox command used so we can report which opcode timed
out.
2001-01-15 18:33:08 +00:00
Matt Jacob
3fc3cadde6 ISPASYNC_PDB_CHANGED -> ISPASYNC_LOGGED_INOUT. 2001-01-09 02:49:02 +00:00
Matt Jacob
0ecded8a13 Add some SNS "Register FC4 type" subcommand defines. Add some defines
that are pertinetnt for state flags on Qlogic 2X00 status completion
entries.
2001-01-09 02:48:44 +00:00
Matt Jacob
27d1caa3cd Up tsleep && poll time for mailbox commands from 2 to 10 seconds. Print
out the mailbox command opcode if the command times out.
2001-01-09 02:47:56 +00:00
Matt Jacob
4b9d588e2c Follow the ISPASYNC_PDB_CHANGED -> ISPASYNC_LOGGED_INOUT change. Also,
ISPASYNC_NOTIFY_CHANGE now is for both local loop && fabric changes.
2001-01-09 02:47:15 +00:00
Matt Jacob
0433833d0d Add a isp_register_fc4_type function so that we work with McData switches
that require us to register our FC4 types of interest. Allow ourselves, in
F-port topologies, to start logging in fabric devices in the target 0..125
range. Change ISPASYNC_PDB_CHANGED (misnamed) to ISPASYNC_LOGGED_INOUT.
Fix (*SMACK*) again some default WWN stuff. This is *really* hard to get
right across all the range of platforms.
2001-01-09 02:46:23 +00:00
Matt Jacob
3486bfe084 add missing length argument 2001-01-09 02:12:42 +00:00
Matt Jacob
91f1caa2d8 Fix problems with incomplete conversions from printf to isp_prt. 2000-12-31 20:50:56 +00:00
Matt Jacob
56c6d0d775 Change the modification of what could be a const string. Apparently the
construct:

	char *foo;
	...
	foo = "XXX";
	...
	foo[1] = 'Y';

is wrong. IT blew up on NetBSD-sparc64 because that platform write-protects
constant strings.
2000-12-30 20:09:26 +00:00
Matt Jacob
e9423e211e Add in Bill Sommerfeld's -Wformat stuff. Add a ISP_CFG_NOINIT option
to keep from completing initialization when isp_init is called.
2000-12-29 19:17:18 +00:00
Matt Jacob
8ead30564e Add in Bill Sommerfelds -Wformat changes. Set up default node && port
WWNs correctly (Again!) - this time for the case that we're not going
to fully init the adapter if isp_init is called (with ISP_CFG_NOINIT
set in options). The pupose for this is to bring the adapter up to
almost ready to go, get info out of NVRAM, but to not start it up- leaving
it until later to actually start things up if wanted (and possibly with
different roles selected).
2000-12-29 19:12:44 +00:00
Matt Jacob
f09b192280 Set up to do a local interrupt fielding before calling common code-
allows us to grab lock as we should.
2000-12-29 19:10:16 +00:00
Matt Jacob
c40e096ed6 Make sure we do locking if we call isp_intr.
Make sure we enter Giant for now if we call into cam for completion.
2000-12-29 19:06:32 +00:00