In r360131, acpi_ec probe was changed to not clobber an error status prior to
several error cases that did not explicitly set the error variable before
goto'ing the exit path. However, I did not notice that the error variable was
not set to success in the success path. That caused all successful probes to
fail, which is obviously undesirable.
PR: 245778
Reported by: Neel Chauhan <neel AT neelc.org>, Evilham <contact AT evilham.com>
Tested by: Evilham
X-MFC-With: r360131
The segfault fix was originally developed by our upstream, sqlite.org,
to address S/390 and Sparc segfaults, both of which are big endian.
Our PowerPC is also big endian, which this patch also fixes.
Reported by: Mark Millard <marklmi at yahoo.com>
Tested by: Mark Millard <marklmi at yahoo.com>
Obtained from: https://www.sqlite.org/src/vinfo/04885763c4cd00cb?diff=1https://sqlite.org/forum/forumpost/672291a5b2
MFC after: 1 month
X-MFC with: r360221, 360221
recommit r357201: MFV r357163, which was reverted by r357522
due to segfault under PowerPc.
Update sqlite3-3.30.1 (3300100) --> sqlite3-3.31.0 (3310000)
MFC after: 1 month
One of the goals of the new routing KPI defined in r359823 is to entirely
hide`struct rtentry` from the consumers. It will allow to improve routing
subsystem internals and deliver more features much faster.
This commit is mostly mechanical change to eliminate direct struct rtentry
field accesses.
The only notable difference is AF_LINK gateway encoding.
AF_LINK gw is used in routing stack for operations with interface routes
and host loopback routes.
In the former case it indicates _some_ non-NULL gateway, as the interface
is the same as in rt_ifp in kernel and rtm_ifindex in rtsock reporting.
In the latter case the interface index inside gateway was used by the IPv6
datapath to verify address scope for link-local interfaces.
Kernel uses struct sockaddr_dl for this type of gateway. This structure
allows for specifying rich interface data, such as mac address and interface
name. However, this results in relatively large structure size - 52 bytes.
Routing stack fils in only 2 fields - sdl_index and sdl_type, which reside
in the first 8 bytes of the structure.
In the new KPI, struct nhop_object tries to be cache-efficient, hence
embodies gateway address inside the structure. In the AF_LINK case it
stores stortened version of the structure - struct sockaddr_dl_short,
which occupies 16 bytes. After D24340 changes, the data inside AF_LINK
gateway will not be used in the kernel at all, leaving rtsock as the only
potential concern.
The difference in rtsock reporting:
(old)
got message of size 240 on Thu Apr 16 03:12:13 2020
RTM_ADD: Add Route: len 240, pid: 0, seq 0, errno 0, flags:<UP,DONE,PINNED>
locks: inits:
sockaddrs: <DST,GATEWAY,NETMASK>
10.0.0.0 link#5 255.255.255.0
(new)
got message of size 200 on Sun Apr 19 09:46:32 2020
RTM_ADD: Add Route: len 200, pid: 0, seq 0, errno 0, flags:<UP,DONE,PINNED>
locks: inits:
sockaddrs: <DST,GATEWAY,NETMASK>
10.0.0.0 link#5 255.255.255.0
Note 40 bytes different (52-16 + alignment).
However, gateway is still a valid AF_LINK gateway with proper data filled in.
It is worth noting that these particular messages (interface routes) are mostly
ignored by routing daemons:
* bird/quagga/frr uses RTM_NEWADDR and ignores prefix route addition messages.
* quagga/frr ignores routes without gateway
More detailed overview on how rtsock messages are used by the
routing daemons to reconstruct the kernel view, can be found in D22974.
Differential Revision: https://reviews.freebsd.org/D24519
as the dma_device during RDMA registration.
cxgbe's struct device cannot be used as-is because it's a native FreeBSD
driver and ibcore is LinuxKPI based.
MFC after: 1 week
MFC after: r360196
r360139 made compiling with NO_HISTORY work. This #define does not remove
the fc and bind builtins completely but makes them always write an error
message.
However, there was also some code in builtins.def and mkbuiltins to remove
the fc builtin entirely (but not the bind builtin). The additional build
system complication to make this work seems not worth it, so remove that
code.
Thanks to Natalie Silvanovich from Google for finding and reporting the
issue found by her in the SCTP userland stack.
MFC after: 3 days
X-MFC with: https://svnweb.freebsd.org/changeset/base/360193
RFC5661 specifies that a client's recovery upon receipt of NFSERR_BADSESSION
should first consist of a CreateSession operation using the extant ClientID.
If that fails, then a full recovery beginning with the ExchangeID operation
is to be done.
Without this patch, the FreeBSD client did not attempt the CreateSession
operation with the extant ClientID and went directly to a full recovery
beginning with ExchangeID. I have had this patch several years, but since
no extant NFSv4.n server required the CreateSession with extant ClientID,
I have never committed it.
I an committing it now, since I suspect some future NFSv4.n server will
require this and it should not negatively impact recovery for extant NFSv4.n
servers, since they should all return NFSERR_STATECLIENTID for this first
CreateSession.
The patched client has been tested for recovery against both the FreeBSD
and Linux NFSv4.n servers and no problems have been observed.
MFC after: 1 month
- Lookup device drivers to test by name instead of assuming that the
software / hardware flags will select specific drivers.
- Set the sysctl to permit software /dev/crypto requests when testing
the accelerated software blake2 driver.
PR: 245825
Reported by: lwhsu
Reviewed by: cem, lwhsu
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24540
RFC 8221 does not outright ban 3des as the algorithms deprecated for
13 in r348205, but it is listed as a SHOULD NOT and will likely be a
MUST NOT by the time 13 ships.
Discussed with: bjk
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24341
For PIE binaries, ldd(1) performs dlopen(RTLD_TRACE) on the binary.
It is legal for binary to use initial exec TLS mode, but when such
binary (actually dso) is dlopened, we might not have enough free space
in the finalized static TLS segment. Make ldd operational by skipping
TLS space allocation, we are not going to execute any code from the
dso anyway.
Reported by: tobik
PR: 245677
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Make menu customizations easier by naming the entries and using the
names to build the table entries.
Reviewed by: kevans
Approved by: mav (mentor)
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D24527
This patch is about sorting the arguments and using proper mdoc(7) macros
to stylize arguments and command modifiers for much better readability.
Further style fixes in other sections within the bhyve manual page are
going to be worked on in upcoming patches.
Reviewed by: rgrimes
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24526
In the below-referenced PR, a case is attached of a simple reproducer that
exhibits suboptimal behavior: EVFILT_READ and EVFILT_WRITE being set in the
same kevent(2) call will only honor the first one. This is, in-fact, how
it's supposed to work.
A read of the manpage leads me to believe we could be more clear about this;
right now there's a logical leap to make in the relevant statement: "When
passed as input, it forces EV_ERROR to always be returned." -- the logical
leap being that this indicates the caller should have allocated space for
the change to be returned with EV_ERROR indicated in the events, or
subsequent filters will get dropped on the floor.
Another possible workaround that accomplishes similar effect without needing
space for all events is just setting EV_RECEIPT on the final change being
passed in; if any errored before it, the kqueue would not be drained. If we
made it to the final change with EV_RECEIPT set, then we would return that
one with EV_ERROR and still not drain the kqueue. This would seem to not be
all that advisable.
PR: 229741
MFC after: 1 week
Add driver for Broadcom "GENET" version 5, as found in BCM-2711 on
Raspberry Pi 4B. The driver is derived in part from the bcmgenet.c
driver in NetBSD, along with bcmgenetreg.h.
Reviewed by: manu
Obtained from: in part from NetBSD
Relnotes: yes, note addition
Differential Revision: https://reviews.freebsd.org/D24436
Allocate a temporary buffer in the kernel to serve as the CCB data
pointer for a pass-through transaction and use copyin/copyout to
shuffle the data to/from the user buffer.
Reviewed by: scottl, brooks
Obtained from: CheriBSD
MFC after: 2 weeks
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24489
The handle_string callback for the ENCIOC_SETSTRING ioctl was passing
a user pointer to memcpy(). Fix by using copyin() instead.
For ENCIOC_GETSTRING ioctls, the handler was storing the user pointer
in a CCB's data_ptr field where it was indirected by other code. Fix
this by allocating a temporary buffer (which ENCIOC_SETSTRING already
did) and copying the result out to the user buffer after the CCB has
been processed.
Reviewed by: kib
Obtained from: CheriBSD
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24487
These two sysctls were added to support UFS softupdates journalling
with snapshots. However, the changes to fsck to use them were never
committed and there have never been any in-tree uses of these sysctls.
More details from Kirk:
When journalling got added to soft updates, its journal rollback freed
blocks that it thought were no longer in use. But it does not take
snapshots into account (i.e., if a snapshot is still using it, then it
cannot be freed). So I added the needed logic to fsck by having the
free go through the kernel's blkfree code so it could grab blocks that
were still needed by snapshots. That is done using the setbufoutput
hack. I never got that code working reliably, so it is still sitting
in my work directory. Which also explains why you still cannot take
snapshots on filesystems running with journalling...
In looking over my use of this feature, and in particular the troubles
I was having with it, I conclude that it may be better to extract the
code from the kernel that handles freeing blocks claimed by snapshots
and putting it into fsck directly. My original intent was that it is
complex and at the time changing, so only having to maintain it in one
place was appealing. But at this point it has not changed in years and
the hacks like setinode and setbufoutput to be able to use the kernel
code is sufficiently ugly, that I am leaning towards just extracting
it.
Reviewed by: mckusick
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24484
This avoids passing garbage to sigprocmask() if the jump buffer is
invalid.
Reviewed by: mhorne
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24483
If DTRACE is enabled at compile time, all kernel breakpoint traps are
first given to dtrace to see if they are triggered by a FBT probe.
Previously if dtrace didn't recognize the trap, it was silently
ignored breaking the handling of other kernel breakpoint traps such as
the debug.kdb.enter sysctl. This only returns early from the trap
handler if dtrace recognizes the trap and handles it.
Submitted by: Nicolò Mazzucato <nicomazz97@gmail.com>
Reviewed by: markj
Obtained from: CheriBSD
Differential Revision: https://reviews.freebsd.org/D24478
While here, replace the array of mapping structures with an array of
string pointers where the index is the capability value.
Submitted by: Rob Fairbanks <rob.fx907@gmail.com>
Reviewed by: rgrimes
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24289
blockcount_wait() still unconditionally waits for the count to reach
zero before returning.
Tested by: pho (a larger patch)
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24513
The sysctl output looks like this:
dev.hwpstate_intel.0.epp: 50
dev.hwpstate_intel.0.%parent: cpu0
dev.hwpstate_intel.0.%pnpinfo:
dev.hwpstate_intel.0.%location:
dev.hwpstate_intel.0.%driver: hwpstate_intel
dev.hwpstate_intel.0.%desc: Intel Speed Shift
but all the '%' got escaped in the manual page, un-escape them.
While here:
- Move the example of dev.hwpstate_intel.%d.%parent after the description to
align with others.
- Capitalize "CPU" (*)
Submitted by: danfe (*)
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D24520
The current situation results in intermittent breakage if data gets split up
with the sign bit set on the data1 half of it, as PAIR32TO64 will then:
data1 | (data2 << 32) -> resulting in data1 getting sign-extended when it's
implicitly widened and clobbering the result. AFAICT, there's no compelling
reason for these to be signed.
This was most exposed by flakiness in the kqueue timer tests under compat32
after the ABSTIME test got switched over to using a better clock and
microseconds.
Reviewed by: kib
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D24518
kmem_alloc_attr_domain() and kmem_alloc_contig_domain() duplicated each
other's page allocation and reclamation logic. Place it in a single
function to make it easier to add additional consumers. No functional
change intended.
Reviewed by: jeff, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24475
This simplifies some planned changes. No functional change intended.
Reviewed by: kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24474
