This used to work by accident with ld.bfd even though always_keepalive
was marked as static. LLD honors static more correctly, so export this
variable properly (including moving it into the tcp_* namespace).
Reviewed by: bz, emaste
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D14129
If a zfs pool contains a replacing vdev (either created manually by "zpool
replace" or by zfsd(8) via autoreplace by physical path) and then new spares
get added to the pool, zfsd shouldn't use one to replace the drive that is
already being replaced. That's a waste of resources that just slows down
the rebuild.
PR: 225547
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Some ABIs have large gaps in syscall numbers. Allow gaps to be filled
as ranges of UNIMPL, with an entry like:
248-1023 AUE_NULL UNIMPL unimplemented
Reviewed by: jhb, gnn
Sponsored by: Turing Robotic Industries Inc.
Differential Revision: https://reviews.freebsd.org/D14122
checks to recognize own network devices when using mlx5ib. This patch fixes
an issues where mlx5ib fails to recognize mceX network devices for use with
RoCE.
MFC after: 1 week
Sponsored by: Mellanox Technologies
host to reprobe the bus by switching the USB pull up resistors off and
back on. In other words - when FreeBSD is configured as a USB device,
changing the sysctl will be immediately noticed by the machine it's
connected to.
Reviewed by: hselasky@
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Add libxo output support
Merge exp41_intpr and exp_intpr function. The only difference is to print
NFSV4.1 operations in exp41, add a third arguement to control that.
printtitle was set to 1 and don't have a switch, add a -q options to control it.
Reviewed by: bapt
Sponsored by: Gandi.net
Differential Revision: https://reviews.freebsd.org/D14012
NetBSD's libedit has been been cleaned-up considerably so the
non--widecharacter version is no longer an option. Re -sorting the
Makefile should make it easier for some brave soul trying to update it.
No functional change intended.
MFC after: 5 days
The test was marked as an expected failure in r320414 after r319971's import
of a newer jemalloc removed an essential feature (opt.redzone) for
reproducing the behavior it was testing. Since then, no way has been found
or demonstrated to reliably test the behavior, so remove the test.
PR: 220309
net80211/ieee80211_ageq.c was present twice in sys/conf/files so leave the
correctly sorted one. dev/wpi/if_wpi.c was present in sys/conf/files as well
as sys/conf/files.amd64 and sys/conf/files.i386 so prefer the sys/conf/files
entry.
Reviewed by: allanjude, rstone
Restore state 6. Many of the UNH tests end up exercising this
state, where we have a new neighbor cache entry and a new link-layer
entry is being created for it. The link-layer address is currently
unknown so the initial state of the "llentry" should remain initialized
to ND6_LLINFO_NOSTATE so that the ND code will send a solicitation.
Setting this to ND6_LLINFO_STALE implies that the link-level entry
is valid and can be used (but needs to be refreshed via the Neighbor
Unreachability state machine).
https://forums.freebsd.org/threads/64287/
Submitted by: Farrell Woods <Farrell_Woods@Dell.com>
Reviewed by: mjoras, dab, ae
MFC after: 1 week
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D14059
This may lead to unpredicatable behaviour on different platforms or C
library implementations. Use an intermediate variable.
Obtained from: DragonFlyBSD (git a861a526)
Tests were disconnected so that running `make check` in usr.bin/awk did not
have any effect, but CI runs use installed tests. Fully disconnect tests/
from the build for the time being as a short term solutio
Reported by: lwhsu
The test was added prematurely as a goal to reach with the GNU extension
functionality, but the functionality has not yet been introduced. Mark it as
an expected fail until that point.
The root problem is that we were creating a PT_LOAD just for the header.
That was technically valid, but inconvenient: we should not be making
the ELF discontinuous.
The solution is to allow a section with LMAExpr to be added to a PT_LOAD
if that PT_LOAD doesn't already have a LMAExpr.
LLVM PR: 36017
Obtained from: LLVM r323625 by Rafael Espindola
If two sections are in the same PT_LOAD, their relatives offsets,
virtual address and physical addresses are all the same.
[Rafael] initially wanted to have a single global LMAOffset, on the
assumption that every ELF file was in practiced loaded contiguously in
both physical and virtual memory.
Unfortunately that is not the case. The linux kernel has:
LOAD 0x200000 0xffffffff81000000 0x0000000001000000 0xced000 0xced000 R E 0x200000
LOAD 0x1000000 0xffffffff81e00000 0x0000000001e00000 0x15f000 0x15f000 RW 0x200000
LOAD 0x1200000 0x0000000000000000 0x0000000001f5f000 0x01b198 0x01b198 RW 0x200000
LOAD 0x137b000 0xffffffff81f7b000 0x0000000001f7b000 0x116000 0x1ec000 RWE 0x200000
The delta for all but the third PT_LOAD is the same:
0xffffffff80000000. [Rafael] thinks the 3rd one is a hack for implementing
per cpu data, but we can't break that.
Obtained from: LLVM r323456 by Rafael Espindola
This fixes the crash reported at [LLVM] PR36083.
The issue is that we were trying to put all the sections in the same
PT_LOAD and crashing trying to write past the end of the file.
This also adds accounting for used space in LMARegion, without it all
3 PT_LOADs would have the same physical address.
Obtained from: LLVM r323449 by Rafael Espindola
When mbuf has M_FASTFWD_OURS flag, this means that a destination address
is our local, but we still need to pass scope zone violation check,
because protocol level expects that IPv6 link-local addresses have
embedded scope zone indexes. This should fix the problem, when ipfw is
used to forward packets to local address and source address of a packet
is IPv6 LLA.
Reported by: sbruno
MFC after: 3 weeks
When an interface has IFF_LOOPBACK flag in6_ifattach() tries to assing
IPv6 loopback address to this interface. It uses in6ifa_ifpwithaddr()
to check, that interface doesn't already have given address and then
uses in6_ifattach_loopback(). If in6_ifattach_loopback() fails, it just
exits and thus skips assignment of IPv6 LLA.
Fix this using in6ifa_ifwithaddr() function. If IPv6 loopback address is
already assigned in the system, do not call in6_ifattach_loopback().
PR: 138678
MFC after: 3 weeks
It turns out that under some circumstances we can get DSI or DSE before we set
LPCR and LPID so we should set it as early as possible.
Authored by: Patryk Duda <pdk@semihalf.com>
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: IBM, QCM Technologies
On POWER8 with current petitpoot, the loader.kboot might be
run as little-endian application. The FreeBSD kernel is
always big-endian, so the load_elf_* routines must be aware
of proper endianness of all fields.
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: IBM, QCM Technologies
Differential revision: https://reviews.freebsd.org/D12422
On CHRP and PowerNV, use the interrupt server number in the cpuref and pcpu
hwref field instead of the device-tree phandle and make the CPU IDs reported
to the scheduler dense and with the BSP at 0.
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: IBM, QCM Technologies
Differential revision: https://reviews.freebsd.org/D14011
Cleaning up AP startup routines. This is a mix of changes
required to make PowerNV running and to modify the code
to be more robust. Previously, some races were seen if more
than 90CPUs were online.
Authored by: Patryk Duda <pdk@semihalf.com>
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: IBM, QCM Technologies
Differential revision: https://reviews.freebsd.org/D14026
used with hashed page tables on AIM and place it into a new, modular pmap
function called pmap_decode_kernel_ptr(). This function is the inverse
of pmap_map_user_ptr(). With POWER9 radix tables, which mapping to use
becomes more complex than just AIM/BOOKE and it is best to have it in
the same place as pmap_map_user_ptr().
Reviewed by: jhibbits
