DTS node can have this property which configure the burst length
for both TX and RX if it's the same.
This unbreak if_dwc on Allwinner A20 and possibly other boards that
uses this prop.
Reported by: qroxana <qroxana@mail.ru>
It is common for freelists to be starving when a netmap application
stops. Mailbox commands to free queues can hang in such a situation.
Avoid that by not freeing the queues when netmap is switched off.
Instead, use an alternate method to stop the queues without releasing
the context ids. If netmap is enabled again later then the same queue
is reinitialized for use. Move alloc_nm_rxq and txq to t4_netmap.c
while here.
MFC after: 1 week
Sponsored by: Chelsio Communications
hw.physmem tunable allows to limit number of physical memory available to the
system. It's handled in machdep files for x86 and PowerPC. This patch adds
required logic to the consolidated physmem management interface that is used by
ARM, ARM64, and RISC-V.
Submitted by: Klara, Inc.
Reviewed by: mhorne
Sponsored by: Ampere Computing
Differential Revision: https://reviews.freebsd.org/D27152
In the PCB struct, we need to match the VSX register file layout
correctly, as the VSRs shadow the FPRs.
In LE, we need to have a dword of padding before the fprs so they end up
on the correct side, as the struct may be manipulated by either the FP
routines or the VSX routines.
Additionally, when saving and restoring fprs, we need to explicitly target
the fpr union member so it gets offset correctly on LE.
Fixes weirdness with FP registers in VSX-using programs (A FPR that was
saved by the FP routines but restored by the VSX routines was becoming 0
due to being loaded to the wrong side of the VSR.)
Original patch by jhibbits.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D27431
Allow fdt devices to be used as debug ports for gdb(4).
A debug console can be specified with the "freebsd,debug-path" property
in the device tree's /chosen node, or using the environment variable
hw.fdt.dbgport.
The device should be specified by its name in the device tree, for
example hw.fdt.dbgport="serial2".
PR: 251053
Submitted by: Dmitry Salychev <dsl@mcusim.org>
Submitted by: stevek (original patch, D5986)
Reviewed by: andrew, mhorne
Differential Revision: https://reviews.freebsd.org/D27422
r367917 fixed the backpressure on the netmap rxq being stopped but that
doesn't help if some other netmap rxq is starved (because it is stopping
too although the driver doesn't know this yet) and blocks the pipeline.
An alternate fix that works in all cases will be checked in instead.
Sponsored by: Chelsio Communications
A failure in iflib_device_register() can result in
em_free_pci_resources() being called after receive queues have already
been freed. In particular, a failure to allocate IRQ resources will goto
fail_queues, where IFDI_QUEUES_FREE() will be called via
iflib_tx_structures_free(), preceding the call to IFDI_DETACH().
Cope with this by checking adapter->rx_queues before dereferencing it.
A similar check is present in ixgbe(4) and ixl(4).
MFC after: 1 week
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D27260
- in nvme_qpair_process_completions() do dma sync before completion buffer
is used.
- in nvme_qpair_submit_tracker(), don't do explicit wmb() also for arm
and arm64. Bus_dmamap_sync() on these architectures is sufficient to ensure
that all CPU stores are visible to external (including DMA) observers.
- Allocate completion buffer as BUS_DMA_COHERENT. On not-DMA coherent systems,
buffers continuously owned (and accessed) by DMA must be allocated with this
flag. Note that BUS_DMA_COHERENT flag is no-op on DMA coherent systems
(or coherent buses in mixed systems).
MFC after: 4 weeks
Reviewed by: mav, imp
Differential Revision: https://reviews.freebsd.org/D27446
When updating a table, pf will keep existing table entry structures
corresponding to addresses that are in both of the old and new tables.
However, the update may also enable or disable per-entry counters which
are allocated separately. Thus when toggling PFR_TFLAG_COUNTERS, the
entries may be missing counters or may have unused counters allocated.
Fix the problem by modifying pfr_ina_commit() to transfer counters
from or to entries in the shadow table.
PR: 251414
Reported by: sigsys@gmail.com
Reviewed by: kp
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27440
Prior to the patch returning selfdfree could still be racing against doselwakeup
which set sf_si = NULL and now locks stp to wake up the other thread.
A sufficiently unlucky pair can end up going all the way down to freeing
select-related structures before the lock/wakeup/unlock finishes.
This started manifesting itself as crashes since select data started getting
freed in r367714.
Right now, if lio registered zero jobs, syscall frees lio job
structure, cleaning up queued ksi. As result, the realtime signal is
dequeued and never delivered.
Fix it by allowing sendsig() to copy ksi when job count is zero.
PR: 220398
Reported and reviewed by: asomers
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D27421
On some of the server-grade ARM64 machines the number of NUMA domains is higher
than 2. When booting GENERIC kernel on such machines the SRAT parser fails
leaving the system with a single domain. To make GENERIC kernel usable on those
server, match the parameter value with the one for amd64 arch.
Reviewed by: allanjude
Differential Revision: https://reviews.freebsd.org/D27368
Sponsored by: Ampere Computing
Submitted by: Klara, Inc.
Some USB WLAN devices have "on-board" storage showing up as umass
and making the root mount wait for a very long time.
The WLAN drivers know how to deal with that an issue an eject
command later when attaching themselves.
Introduce a quirk to not probe these devices as umass and avoid
hangs and confusion altogether.
Reviewed by: hselasky, imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27434
This catches up to the changes made to struct unwind_state in r364180.
Reviewed by: mhorne
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27360
- Validate any stack addresses read from against td_kstack before
reading. If an unwind operation would attempt to read outside the
bounds of td_kstack, abort the unwind instead.
- For stack_save_td(), don't use the PC and SP from the current
thread, instead read the PC and SP from pcb_context[].
- For stack_save(), use the current PC and SP of the current thread,
not the values from pcb_regs (the horribly named td_frame of the
outermost trapframe). The result was that stack_trace() never
logged _any_ kernel frames but only the frame from the saved
userspace registers on entry from the kernel.
- Inline the one use of stack_register_fetch().
- Add a VALID_PC() helper macro and simplify types to remove
excessive casts in stack_capture().
- Fix stack_capture() to work on compilers written in this century.
Don't treat function epilogues as function prologues by skipping
additions to SP when searching for a function start.
- Add some comments to stack_capture() and fix some style bugs.
Reviewed by: arichardson
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27358
This is useful for stack unwinders which need to avoid out-of-bounds
reads of a kernel stack which can trigger kernel faults.
Reviewed by: kib, markj
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27356
Revert the mitigation code for the vnet/epair cleanup race (done in r365457).
r368237 introduced a more reliable fix.
MFC after: 2 weeks
Sponsored by: Modirum MDPay
When destroying a vnet and an epair (with one end in the vnet) we often
panicked. This was the result of the destruction of the epair, which destroys
both ends simultaneously, happening while vnet_if_return() was moving the
struct ifnet to its home vnet. This can result in a freed ifnet being re-added
to the home vnet V_ifnet list. That in turn panics the next time the ifnet is
used.
Prevent this race by ensuring that vnet_if_return() cannot run at the same time
as if_detach() or epair_clone_destroy().
PR: 238870, 234985, 244703, 250870
MFC after: 2 weeks
Sponsored by: Modirum MDPay
Differential Revision: https://reviews.freebsd.org/D27378
A pair of bugs are believed to have caused the hangs described in the
commit log message for r364744:
1. uma_reclaim() could trigger reclamation of the reserve of boundary
tags used to avoid deadlock. This was fixed by r366840.
2. The loop in vmem_xalloc() would in some cases try to allocate more
boundary tags than the expected upper bound of BT_MAXALLOC. The
reserve is sized based on the value BT_MAXMALLOC, so this behaviour
could deplete the reserve without guaranteeing a successful
allocation, resulting in a hang. This was fixed by r366838.
PR: 248008
Tested by: rmacklem
Refactor sysctl_sysctl_next_ls():
* Move huge inner loop out of sysctl_sysctl_next_ls() into a separate
non-recursive function, returning the next step to be taken.
* Update resulting node oid parts only on successful lookup
* Make sysctl_sysctl_next_ls() return boolean success/failure instead of errno,
slightly simplifying logic
Reviewed by: freqlabs
Differential Revision: https://reviews.freebsd.org/D27029
Otherwise qat_detach() may attempt to deregister an unrelated crypto
driver if an error occurs in qat_attach() before crypto_get_driverid()
is called, since 0 is a valid driver ID.
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC (Netgate)
If firmware_get() fails to find a loaded firmware image, it searches for
candidate KLDs to load. It will search for a KLD containing a module
with the same name as the requested image, and failing that, will load a
KLD with the same basename as the requested image.
The module name given by fw_stub.awk is simply "<mangled KLD name>_fw".
QAT firmware modules contain two images, neither of which match either
of the names used during lookup, so automatic loading of firmware images
after mountroot does not work. Work around this by using the same
string for the first image name and for the KLD basename.
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC (Netgate)
BA_CLRBUF specifies that existing context of the block will be
completely overwritten by caller, so there is no reason to spend io
fetching existing data. We do the same for indirect blocks.
Reported by: tmunro
Reviewed by: mckusick, tmunro
Tested by: pho, tmunro
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D27353
Allocation of a bucket can trigger a cross-domain free in the bucket
zone, e.g., if the per-CPU alloc bucket is empty, we free it and get
migrated to a remote domain. This can lead to deadlocks since a bucket
zone may allocate buckets from itself or a pair of bucket zones could be
allocating from each other.
Fix the problem by dropping the cross-domain lock before allocating a
new bucket and handling refill races. Use a list of empty buckets to
ensure that we can make forward progress.
Reported by: imp, mjg (witness(9) warnings)
Discussed with: jeff
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27341
Add a new hw.aw_mmc.debug sysctl to help debugging the driver.
Bit 0 will debug card changes (removal, insertion, power up/down)
Bit 1 will debug ios changes
Bit 2 will debug interrupts received
Bit 3 will debug commands sent
Implement vt_vbefb to support Vesa Bios Extensions (VBE) framebuffer with VT.
vt_vbefb is built based on vt_efifb and is assuming similar data for
initialization, use MODINFOMD_VBE_FB to identify the structure vbe_fb
in kernel metadata.
struct vbe_fb, is populated by boot loader, and is passed to kernel via
metadata payload.
Differential Revision: https://reviews.freebsd.org/D27373
These swapping functions violate BUSDMA contract - we cannot write
to armed (by bus_dmamap_sync(PRE_..)) buffers. Remove them at least
from little endian machines until a better solution will be developed.
Reviewed by: imp
MFC after: 3 weeks
ROUTE_MPATH is the new config option controlling new multipath routing
implementation. Remove the last pieces of RADIX_MPATH-related code and
the config option.
Reviewed by: glebius
Differential Revision: https://reviews.freebsd.org/D27244
Some of them have limited KVA, like arm, which prevents startup from
allocating needed number of large pbufs. Other, for instance i386,
are dis-balanced enough after 4/4 that blind bump is probably harmful
because it allows for much more in-flight io than other tunables are
ready for.
Requested by: mmel
Reviewed by: emaste, mmel
Sponsored by: The FreeBSD Foundation
MPIDR represents physical locality of given core and it should be used as
the only viable/robust connection between cpuid (which have zero relation to
cores topology) and external description (for example in FDT). It can be
used for determining which interrupt is associated to given per-CPU PMU
or by scheduler for determining big/little core or cluster topology.
MFC after: 3 weeks
