pv entries per 1GB of user virtual memory. (eg: if we had 1GB file was
mmaped into 30 processes, that would theoretically reduce the KVA demand by
30MB for pv entries. In reality though, we limit pv entries so we don't
have that many at once.)
We used to store the vm_page_t for the page table page. But we recently
had the pa of the ptp, or can calculate it fairly quickly. If we wanted
to avoid the shift/mask operation in pmap_pde(), we could recover the
pa but that means we have to store it for a while.
This does not measurably change performance.
Suggested by: alc
Tested by: alc
This should fix problems with older SMP systems that only have ISA/EISA
IRQs when routing virgin PCI interrupts as well as on other boxes whose
MADT does not have any interrupt override entries for ISA IRQs that are
used to route PCI interrupts even in APIC mode.
- Allow ioapic_set_{nmi,smi,extint}() to be called multiple times on the
same pin so long as the pin's mode is the same as the mode being
requested.
- Add a notion of bus type for the interrupt associated with interrupt pin.
This is needed so that we can force all EISA interrupts to be active high
in the forthcoming ioapic_config_intr().
- Fix a bug for EISA systems that didn't remap IRQs. This would have broken
EISA systems that tried to disable mixed mode for IRQ 0.
in npxsetregs() too. npxsetregs() must overwrite the previous state, and
it is never paired with an npxgetregs() that would defuse the previous
state (since npxgetregs() would have fninit'ed the state, leaving nothing
to do).
PR: 68058 (this should complete the fix)
Tested by: Simon Barner <barner@in.tum.de>
unnecessary because cpu_setregs() and/or npxinit() always sets CR0_TS
during system initialization, and CR0_TS is set in the next statement
(fpstate_drop()) if necessary after system initialization. Setting
it unnecessarily was less than a pessimization since it broke the
invariant that the npx can be used without an npxdna() trap if
fpucurthread is non-null. The broken invariant became harmful when I
added an fnclex to npxdrop().
Removed setting of CR0_MP in exec_setregs(). This was similarly
unnecessary but was harmless.
Updated comments (mainly by removing them). Things are simpler now
that we have cpu_setregs() and don't support a math emulator or pretend
to support not having either a math emulator or an npx.
Removed the ifdef for avoiding setting CR0_NE in the !SMP case in
cpu_setregs(). npx_probe() should reverse the setting if it wants to
force IRQ13 exception handling for testing.
frstor can trap despite it being a control instruction, since it bogusly
checks for pending exceptions in the state that it is overwriting.
This used to be a non-problem because frstor was always paired with a
previous fnsave, and fnsave does an implicit fninit so any pending
exceptions only remain live in the saved state. Now frstor is sometimes
paired with npxdrop() and we must do a little more than just forget
that the npx was used in npxdrop() to avoid a trap later. This is a
non-problem in the FXSR case because fxrstor doesn't do the bogus check.
FXSR is part of SSE, and npxdrop() is only in FreeBSD-5.x, so this bug
only affected old machines running FreeBSD-5.x.
PR: 68058
devclass will be present even if the driver was disabled by a hint. Using
device_get_softc() provides the right info even if it's overkill.
Explained by: jhb
placates gcc which seems to like to complain about -1 being assigned to
an unsigned value. It is well defined and intended, but since signess bugs
are being hunted just change to 0xffffffff.
o Mask the lower 8 bits, not the lower 4 bits for the ai_capabilities word.
All 8 bits are defined and the 0xf was almost certainly a typo.
o Define APM_UNKNOWN to 0xff for emulation layer.
Otherwise, the setting of the PG_M bit by one processor could be lost if
another processor is simultaneously changing the PG_W bit.
Reviewed by: tegge@
present and thus that the PnPBIOS probe should be skipped instead of
having ACPI zero out the PnPBIOStable pointer.
- Make the PnPBIOStable pointer static to i386/i386/bios.c now that that is
the only place it is used.
Dividing by 0 in order to check for irq13/exception16 delivery apparently
always causes an irq13 even if we have configured for exception16 (by
setting CR0_NE). This was expected, but the timing of the irq13 was
unexpected. Without CR0_NE, the irq13 is delivered synchronously at
least on my test machine, but with CR0_NE it is delivered a little
later (about 250 nsec) in PIC mode and much later (5000-10000 nsec)
in APIC mode. So especially in APIC mode, the irq13 may arrive after
it is supposed to be shut down. It should then be masked, but the
shutdown is incomplete, so the irq goes to a null handler that just
reports it as stray. The fix is to wait a bit after dividing by 0 to
give a good chance of the irq13 being handled by its proper handler.
Removed the hack that was supposed to recover from the incomplete shutdown
of irq13. The shutdown is now even more incomplete, or perhaps just
incomplete in a different way, but the hack now has no effect because
irq13 is edge triggered and handling of edge triggered interrupts is
now optimized by skipping their masking. The hack only worked due
to it accidentally not losing races.
The incomplete shutdown of irq13 still allows unprivileged users to
generate a stray irq13 (except on systems where irq13 is actually used)
by unmasking an npx exception and causing one. The exception gets
handled properly by the exception 16 handler. A spurious irq13 is
delivered asynchronously but is harmless (as in the probe) because it
is almost perfectly not handled by the null interrupt handler.
Perfectly not handling it involves mainly not resetting the npx busy
latch. This prevents further irq13's despite them not being masked in
the [A]PIC.
size_t and size_t *, respectively. Update callers for the new interface.
This is a better fix for overflows that occurred when dumping segments
larger than 2GB to core files.
