LoopRotate: When reconstructing loop simplify form don't split edges
from indirectbrs.
Yet another chapter in the endless story. While this looks like we
leave the loop in a non-canonical state this replicates the logic in
LoopSimplify so it doesn't diverge from the canonical form in any way.
http://llvm.org/PR21968
This fixes a "Cannot split critical edge from IndirectBrInst" assertion
failure when building the devel/radare2 port.
PR: 195480, 196987
MFC after: 3 days
FreeBSD core files have no section table and thus LLDB's OS and vendor
detection logic does not work. If we encounter such an ELF file, update
an unknown OS to match the host.
This is not really the correct way to handle this, but more extensive
rework of ObjectFileELF will be needed and this change restores cross-
arch core debugging until that can be completed.
[FastIsel][X86] Fix invalid register replacement for bool args
Summary:
Consider the following IR:
%3 = load i8* undef
%4 = trunc i8 %3 to i1
%5 = call %jl_value_t.0* @foo(..., i1 %4, ...)
ret %jl_value_t.0* %5
Bools (that are the result of direct truncs) are lowered as whatever
the argument to the trunc was and a "and 1", causing the part of the
MBB responsible for this argument to look something like this:
%vreg8<def,tied1> = AND8ri %vreg7<kill,tied0>, 1, %EFLAGS<imp-def>; GR8:%vreg8,%vreg7
Later, when the load is lowered, it will insert
%vreg15<def> = MOV8rm %vreg14, 1, %noreg, 0, %noreg; mem:LD1[undef] GR8:%vreg15 GR64:%vreg14
but remember to (at the end of isel) replace vreg7 by vreg15. Now for
the bug. In fast isel lowering, we mistakenly mark vreg8 as the result
of the load instead of the trunc. This adds a fixup to have
vreg8 replaced by whatever the result of the load is as well, so
we end up with
%vreg15<def,tied1> = AND8ri %vreg15<kill,tied0>, 1, %EFLAGS<imp-def>; GR8:%vreg15
which is an SSA violation and causes problems later down the road.
This fixes PR21557.
Test Plan: Test test case from PR21557 is added to the test suite.
Reviewers: ributzka
Reviewed By: ributzka
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6245
This fixes a possible assertion failure when compiling toolbox.cxx from
LibreOffice 4.3.5.
Reported by: kwm
Allows Clang to use LLVM's fixes-x18 option
This patch allows clang to have llvm reserve the x18
platform register on AArch64. FreeBSD will use this in the kernel for
per-cpu data but has no need to reserve this register in userland so
will need this flag to reserve it.
This uses llvm r226664 to allow this register to be reserved.
Patch by Andrew Turner.
Requested by: andrew
AArch64: add backend option to reserve x18 (platform register)
AAPCS64 says that it's up to the platform to specify whether x18 is
reserved, and a first step on that way is to add a flag controlling
it.
From: Andrew Turner <andrew@fubar.geek.nz>
Requested by: andrew
triple ids
This only allows testing and does not change the defaults for mips/mips64.
They still build/use gcc by default.
Differential Revision: https://reviews.freebsd.org/D1190
Reviewed by: dim
[Aarch64] Customer lowering of CTPOP to SIMD should check for NEON
availability
This ensures llvm's AArch64 backend does not emit floating point
instructions if they are disabled.
Fix transformation of add with pc argument to adr for non-immediate
arguments.
This fixes an "Unimplemented" error when assembling certain ARM add
instructions with pc-relative arguments.
Reported by: sbruno
PR: 196412, 196423
PR20228: don't retain a pointer to a vector element after the
container has been resized.
This fixes a possible crash when compiling certain parts of libc++'s
type_traits header.
PowerPC: CTR shouldn't fire if a TLS call is in the loop
Determining the address of a TLS variable results in a function call in
certain TLS models. This means that a simple ICmpInst might actually
result in invalidating the CTR register.
In such cases, do not attempt to rely on the CTR register for loop
optimization purposes.
This fixes PR22034.
Differential Revision: http://reviews.llvm.org/D6786
This fixes a "Invalid PPC CTR loop" error when compiling parts of libc
for PowerPC-32.
[PowerPC] Replace foul hackery with real calls to __tls_get_addr
My original support for the general dynamic and local dynamic TLS
models contained some fairly obtuse hacks to generate calls to
__tls_get_addr when lowering a TargetGlobalAddress. Rather than
generating real calls, special GET_TLS_ADDR nodes were used to wrap
the calls and only reveal them at assembly time. I attempted to
provide correct parameter and return values by chaining CopyToReg and
CopyFromReg nodes onto the GET_TLS_ADDR nodes, but this was also not
fully correct. Problems were seen with two back-to-back stores to TLS
variables, where the call sequences ended up overlapping with unhappy
results. Additionally, since these weren't real calls, the proper
register side effects of a call were not recorded, so clobbered values
were kept live across the calls.
The proper thing to do is to lower these into calls in the first
place. This is relatively straightforward; see the changes to
PPCTargetLowering::LowerGlobalTLSAddress() in PPCISelLowering.cpp.
The changes here are standard call lowering, except that we need to
track the fact that these calls will require a relocation. This is
done by adding a machine operand flag of MO_TLSLD or MO_TLSGD to the
TargetGlobalAddress operand that appears earlier in the sequence.
The calls to LowerCallTo() eventually find their way to
LowerCall_64SVR4() or LowerCall_32SVR4(), which call FinishCall(),
which calls PrepareCall(). In PrepareCall(), we detect the calls to
__tls_get_addr and immediately snag the TargetGlobalTLSAddress with
the annotated relocation information. This becomes an extra operand
on the call following the callee, which is expected for nodes of type
tlscall. We change the call opcode to CALL_TLS for this case. Back
in FinishCall(), we change it again to CALL_NOP_TLS for 64-bit only,
since we require a TOC-restore nop following the call for the 64-bit
ABIs.
During selection, patterns in PPCInstrInfo.td and PPCInstr64Bit.td
convert the CALL_TLS nodes into BL_TLS nodes, and convert the
CALL_NOP_TLS nodes into BL8_NOP_TLS nodes. This replaces the code
removed from PPCAsmPrinter.cpp, as the BL_TLS or BL8_NOP_TLS
nodes can now be emitted normally using their patterns and the
associated printTLSCall print method.
Finally, as a result of these changes, all references to get-tls-addr
in its various guises are no longer used, so they have been removed.
There are existing TLS tests to verify the changes haven't messed
anything up). I've added one new test that verifies that the problem
with the original code has been fixed.
This fixes a fatal "Bad machine code" error when compiling parts of
libgomp for 32-bit PowerPC.
Add parsing of 'foo@local".
Summary:
Currently, it supports generating, but not parsing, this expression.
Test added as well.
Test Plan: New test added, no regressions due to this.
Reviewers: hfinkel
Reviewed By: hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6672
Pull in r224494 from upstream llvm trunk (by Justin Hibbits):
Add a corresponding '@LOCAL' parse to match r224415.
Pointed out by Jim Grosbach.
[PowerPC] Add JMP_SLOT relocation definitions
This will be required by upcoming patches for LLDB support.
Patch by Justin Hibbits!
Pull in r221510 from upstream llvm trunk (by Justin Hibbits):
Add Position-independent Code model Module API.
Summary:
This makes PIC levels a Module flag attribute, which can be queried by the
backend. The flag is named `PIC Level`, and can have a value of:
0 - Backend-default
1 - Small-model (-fpic)
2 - Large-model (-fPIC)
These match the `-pic-level' command line argument for clang, and the value of the
preprocessor macro `__PIC__'.
Test Plan:
New flags tests specific for the 'PIC Level' module flag.
Tests to be added as part of a future commit for PowerPC, which will use this new API.
Reviewers: rafael, echristo
Reviewed By: rafael, echristo
Subscribers: rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D5882
Pull in r221791 from upstream llvm trunk (by Justin Hibbits):
Add support for small-model PIC for PowerPC.
Summary:
Large-model was added first. With the addition of support for multiple PIC
models in LLVM, now add small-model PIC for 32-bit PowerPC, SysV4 ABI. This
generates more optimal code, for shared libraries with less than about 16380
data objects.
Test Plan: Test cases added or updated
Reviewers: joerg, hfinkel
Reviewed By: hfinkel
Subscribers: jholewinski, mcrosier, emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D5399
Together, these changes implement small-model PIC support for PowerPC.
Thanks to Justin Hibbits and Roman Divacky for their assistance in
getting this working.
Implement vaarg lowering for ppc32. Lowering of scalars and
aggregates is supported. Complex numbers are not.
This adds va_args support for PowerPC (32 bit) to clang.
Implement vaarg lowering for ppc32. Lowering of scalars and
aggregates is supported. Complex numbers are not.
This adds va_args support for PowerPC (32 bit) to clang.
Reviewed by: jhibbits
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D1308
Divacky):
Introduce CPUStringIsValid() into MCSubtargetInfo and use it for ARM
.cpu parsing.
Previously .cpu directive in ARM assembler didnt switch to the new
CPU and therefore acted as a nop. This implemented real action for
.cpu and eg. allows to assembler FreeBSD kernel with -integrated-as.
Change the name to be in style.
Add a FIXME as requested by Renato Golin.
arm asm: Let .fpu enable instructions, PR20447.
I'm not very happy with duplicating the fpu->feature mapping in ARMAsmParser.cpp
and in clang's driver. See the bug for a patch that doesn't do that, and the
review thread [1] for why this duplication exists.
1: http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20140811/231052.html
This makes the .fpu directive work properly, so we can successfully
assemble several .S files using the directive, under lib/libc/arm.
Allow CP10/CP11 operations on ARMv5/v6
Those registers are VFP/NEON and vector instructions should be used instead,
but old cores rely on those co-processors to enable VFP unwinding. This change
was prompted by the libc++abi's unwinding routine and is also present in many
legacy low-level bare-metal code that we ought to compile/assemble.
Fixing bug PR20025 and allowing PR20529 to proceed with a fix in libc++abi.
This enables assembling certain ARM instructions used in libgcc.
Revert "Added inst combine transforms for single bit tests from Chris's note"
This reverts commit r210006, it miscompiled libapr which is used in who
knows how many projects.
A test has been added to ensure that we don't regress again.
This fixes a miscompilation in libapr, which caused problems in svnlite.
