Commit Graph

41867 Commits

Author SHA1 Message Date
bp
40a263bd52 Isolate old constant NCP_VOLNAME_LEN. 1999-10-14 08:57:54 +00:00
bp
511cb27e6c Make libncp actually compiled.
Reviewed by:	mdodd
1999-10-14 06:40:46 +00:00
green
b5080e1313 Fix a race condition with shared fd tables and writev(). It's
still not safe to consider file table sharing secure.
Submitted by:	Ville-Pertti Keinonen <will@iki.fi>
1999-10-14 05:37:52 +00:00
green
e8104eadd5 Add a missing spl lowering.
Submitted by:	Ville-Pertti Keinonen <will@iki.fi>
1999-10-14 05:16:16 +00:00
msmith
23b1a2234e Add support for the version 4 firmware interface and the DAC960 PG and
PJ cards.  This will probably also support the AcceleRAID and
eXtremeRAID cards, but nobody has volunteered one for testing, so I
haven't enabled their PCI device IDs.

Slightly clean up communication between the disk devices and the
controller device as per new practice, and move some more register-
related items int mlxreg.h from mlxvar.h.

Remove some unnecessary read-modify-write operations to the card
control registers; they don't behave like that.

Increase the status polling interval to 10 seconds.  It's still possible
to load the card up to the point where a status poll will find the
previous poll still running, but this will reduce the incidence of
complaints.
1999-10-14 02:54:06 +00:00
jdp
3274954f70 In longjmp, call sigreturn instead of osigreturn. The latter isn't
visible from userland any more.

Reviewed by:	luoqi
1999-10-14 01:16:51 +00:00
imp
54845d7d91 Allow in/out to work in DOS programs.
Submitted by: Parag Patel
PR: bin/8486
1999-10-13 23:48:35 +00:00
imp
83dbf59942 Default to no backspace/delete swapping.
Add a title "DOS" to the X window.

Submitted by: Parag Patel <parag@cgt.com>
PR: bin/8486

Note: The pr was closed a long time ago when the original patch was
applied, rather than the amended one.
1999-10-13 23:40:49 +00:00
grog
6817b4ff2c Remove reference to obsolete initsd function.
This should have been committed yesterday.

Broke-world-for:	USW2 Root <root@usw2.freebsd.org>
1999-10-13 23:00:30 +00:00
charnier
6fd9345dfd Do not dot or \n terminate syslog string. 1999-10-13 20:22:13 +00:00
gallatin
035c9340ad Divide the Alpha's hz of 1024 by 8 to obain a stathz of 128. This
fixes "nice" on the alpha.

obtained from: NetBSD
reviewed by: dfr
1999-10-13 19:18:29 +00:00
dfr
0cef1b8f88 Don't match non-IDE devices in probe.
Reviewed by: sos
1999-10-13 18:56:49 +00:00
obrien
2f32fb0a0e Return these files back to their stock versions.
These files aren't used in either building GCC or with a GCC installation
in the "FreeBSD native" case.
1999-10-13 15:55:31 +00:00
ru
29127d3b8e Cast tp[-2] to unsigned char before comparing.
PR:		14011
Ignored by:	maintainer
Obtained from:	GNU grep 2.3
1999-10-13 12:06:35 +00:00
kato
91e46e056d Sync with sys/i386/isa/pcaudio.c revision 1.55. 1999-10-13 11:07:16 +00:00
kato
01c797eb22 Sync with sys/i386/isa/mse.c revision 1.48. 1999-10-13 11:06:14 +00:00
kato
a165d9295b Sync with sys/i386/i386/machdep.c revision 1.370. 1999-10-13 11:03:41 +00:00
kato
f788cfce4b Sync with sys/i386/conf/majors.i386 revision 1.87. 1999-10-13 11:01:15 +00:00
kato
a64386cbbf Sync with sys/i386/conf/files.i386 revision 1.277. 1999-10-13 11:00:27 +00:00
kato
1c220fd9d8 Sync with sys/i386/conf/Makefile.i386 revision 1.160. 1999-10-13 10:59:23 +00:00
kato
eef5cc208d Sync with sys/boot/i386/btx/btx/Makefile and btx.s revisions 1.7 and
1.12, respectively.
1999-10-13 10:55:56 +00:00
alfred
c92072a8ed change identical and "programming error" panic("mcopy*")'s into
more verbose messages using KASSERT.

Reviewed by: eivind, des
1999-10-13 09:55:42 +00:00
ru
173a5920a1 ioctl -> sysctl for interface address changes.
PR:		14169
Reviewed by:	Ari Suutari <ari@suutari.iki.fi>
1999-10-13 09:00:16 +00:00
marcel
e33752fed2 Fix a security bug. eflags was copied verbatim from userland.
Submitted by: bde
1999-10-13 08:45:12 +00:00
brian
c1de2e69b9 When uncompressing VJ-compressed frames, fix the ip_sum directly
in struct cstate rather than copying the stored header slot into a
potentially mis-aligned buffer then trying to update the ip_sum
without causing an exception on non-i386 hardware.

I've never been able to reproduce this problem, but it has been
reported by many people... besides, the code is now a bit cleaner.

Testing & patience by: Anthony Solovjoff <asolovjoff@hotmail.com>
1999-10-13 07:49:13 +00:00
grog
1e09a99ada Describe the new options of start and init commands. 1999-10-13 03:30:29 +00:00
grog
00578e9ef1 Change default init sizes from 64 kB to 60 kB, since the block device
interface limits it to this anyway.

Change the name of the v flag variable from 'verbose' to 'vflag',
indicating the multiple use (verbose or verify).

Add -S flag to specify the size of some operations.
1999-10-13 03:29:13 +00:00
grog
61c0c72ac5 Change the name of the v flag variable from 'verbose' to 'vflag',
indicating the multiple use (verbose or verify).

Add -S flag to specify the size of some operations.
1999-10-13 03:28:40 +00:00
grog
6615755ffc Change the name of the v flag variable from 'verbose' to 'vflag',
indicating the multiple use (verbose or verify).

vinum_ldi:
  Show active requests for the drive if -v is specified.
  White space cleanup.

vinum_lsi:
  Show the progress of an init command if -v is specified.

vinum_info:
  Print the number of active requests.

  Print out loginfo_sdio and loginfo_sdiodone log entries.
1999-10-13 03:27:55 +00:00
grog
dc37e533a4 Change the name of the v flag variable from 'verbose' to 'vflag',
indicating the multiple use (verbose or verify).

initsd: rewrite:
  Initialization is now done in the kernel.

  Verify (again!) if -v is specified.

  Allow specification of a blocksize, the length to be transferred in
  one transfer.

vinum_revive:
  Allow specification of a blocksize, the length to be transferred in
  one transfer.
1999-10-13 03:27:06 +00:00
grog
7e03845566 Change default revive block size to 60 kB (was 64 kB), and set a
maximum of 64 kB.

vinum_conf, struct drive: add fields for the current number of active
requests and the maximum ever active.

struct sd: Add fields for initialize progress.

struct mc: set the size of saved file names to MCFILENAMELEN instead
of the previous explicit constant.
1999-10-13 03:21:54 +00:00
grog
27e8167b0f Add glue for passing revive block size, and also for initializing a
subdisk.
1999-10-13 03:21:04 +00:00
grog
14c5b40d4b revive_block: Add a check for a too high revive block size. This is
possible now that vinum(8) can specify this size.

Add function initsd, which initializes a subdisk and optionally checks
that it really happened.
1999-10-13 03:20:11 +00:00
grog
1ded084e46 launch_requests:
limit the number of outstanding requests on a specific drive and
  overall.

  Change the way we set the active request count.  This enables us to
  start the requests without being in splbio for the duration, which
  could be very long for IDE drives in PIO mode.
1999-10-13 03:19:31 +00:00
grog
1f8a712f29 MMalloc: don't supply M_WAITOK when mallocing from an interrupt
context.  Be prepared to fail instead.

MMalloc, FFree: ensure that saved file names are properly terminated.
Use MCFILENAMELEN instead of the previous explicit constant.
1999-10-13 03:18:53 +00:00
grog
38685c9f83 struct vinum_ioctl_msg: Add fields verify (for initsd) and blocksize
(for revive and init).
1999-10-13 03:18:29 +00:00
grog
e312ef0ee4 Fix another instance of vinum_scandisk giving a request to the daemon
and then doing it itself, resulting in a panic downed drives.

Sleuth-work-by:	  Christopher Masto <chris@netmonger.net>

Remove dummy function initsd, which is now (implemented) in
vinumrevive.c

vinum_scandisk: Check that a drive is up before reading from it.  This
is probably excessive paranoia.
1999-10-13 03:17:59 +00:00
grog
7e55881dd6 Limit the number of outstanding requests on a specific drive and
overall.
1999-10-13 03:17:21 +00:00
grog
d00c77c723 Modify definition of Malloc: only M_WAITOK if we're not in an
interrupt context.
1999-10-13 03:16:56 +00:00
grog
886293e5aa Change the declaration of initsd. 1999-10-13 03:16:35 +00:00
grog
022ac88e0f Add some private storage so that we can queue requests in an interrupt
environment even if malloc fails.
1999-10-13 03:16:05 +00:00
grog
4b15b7d646 Format documentations in the form that gdb appears to want.
Change the name of rrqi to rqinfo (the equivalent of vinum(8)'s info
-V command).

rqinfo: Cosmetic changes.
	Add printout of the new loginfo types.
1999-10-13 03:15:30 +00:00
grog
78a3376393 Add macro 'msgbuf' for printing out msgbuf. 1999-10-13 03:14:54 +00:00
green
5f17823e6d Enable MTRR support for K7 (Athlon) processors, which happens to have the
same interface as Intel's P6 family has.  Incidentally, I had disabled
it in the first place since I knew the K7s were coming out soon but
did not want to assume they'd have the same MTRR interface as Intel's
chips.

Submitted by:	Ville-Pertti Keinonen <will@iki.fi>
1999-10-12 22:53:05 +00:00
imp
7ec76e0019 Fix one (of the many) buffer overflows in doscmd. 1999-10-12 22:20:18 +00:00
gallatin
aaf5afc559 allow pci_ioctl to work with multi-hose alphas.
Rather than teaching pci_ioctl about hoses, we just pass down a magic number
& let the platform code figure out what the hose is based on what the bus
number is.

concept approved by dfr
1999-10-12 22:10:53 +00:00
dfr
229cdb9144 * Add struct resource_list* argument to resource_list_alloc and
resource_list_release. This removes the dependancy on the
  layout of ivars.

* Move set_resource, get_resource and delete_resource from
  isa_if.m to bus_if.m.

* Simplify driver code by providing wrappers to those methods:

     bus_set_resource(dev, type, rid, start, count);
     bus_get_resource(dev, type, rid, startp, countp);
     bus_get_resource_start(dev, type, rid);
     bus_get_resource_count(dev, type, rid);
     bus_delete_resource(dev, type, rid);

* Delete isa_get_rsrc and use bus_get_resource_start instead.

* Fix a stupid typo in isa_alloc_resource reported by Takahashi
  Yoshihiro <nyan@FreeBSD.org>.

* Print a diagnostic message if we can't assign resources to a PnP
  device.

* Change device_print_prettyname() so that it doesn't print
  "(no driver assigned)-1" for anonymous devices.
1999-10-12 21:35:51 +00:00
jhb
b203e98b2b aThis patch updates the BTX to emulate the BIOS function "Copy Extended
Memory" called as function 0x87 of interrupt 0x15.  Since the Mylex RAID
adapter's BIOS used this function to access memory (actually PCI bus
space) beyond 16 MB, this patch also allows BTX to address all 4 Gig of
possible address space on i386+.  Since the loader does not have room for
4 MB of page tables, this was done by turning off paging.

Paging was turned off via a compile time setting which defaults to off.
To enable paging, simply define the make variable PAGING.

rnordier might want to clean this up later.

Submitted by:	W. Gerald Hicks <wghicks@bellsouth.net>,
		Bosko Milekic <bmilekic@ares.dsuper.net>
Reviewed by:	msmith
Required by:	Mylex RAID adapter's BIOS
1999-10-12 21:33:49 +00:00
obrien
3d4895684d Add a comment explaing the linking and segrated the old and new cases a little. 1999-10-12 20:27:53 +00:00
obrien
bf70525792 Change the name of the file generaged from gxx.gperf from "hash.h" to
"gxx-hash.h" with hopes of getting Cygnus to do the same.  We create a link
to the old name for now.
1999-10-12 20:25:11 +00:00