is then used as an argument to the amd program. This outpu may contain
newlines, but the script did not take care to strip those newlines before
apending it to rc_flags. Revision 1.72 of rc.subr(8) introduced changes that
exposed this problem (specifically putting the final eval'ed command in
quotes).[1]
Also, for correctness' sake, shell directives appended to the command-line
by the script should go into command_args, and not appended directly
to rc_flags.
Reported by: John E Hein <jhein@timing.com> [1]
Tested by: John E Hein <jhein@timing.com>
MFC after: 1 week
codecs. Codec at address 0 seems purely digital, or perhaps an HDMI
interface. Let the driver skip it and continue scanning the codecs
starting with address 2 (Realtek ALC885).
* Due to possibilities of future similar cases, put enough logic
in hdac_scan_codecs() to force codec scanning starting from
XX address via tunable "hint.pcm.%d.codec_index".
Reported / Tested by: Toomas Pelberg <toomasp@gmx.net>
- Trivial headphone / speaker automute fixup for Fujitsu-Siemens
AMILO Si 1848 laptop.
Reported / Tested by: Ed <ed@bsd.it>
- Trivial headphone / speaker automute fixup for Fujitsu-Siemens
Lifebook S7020D laptop.
Reported / Tested by: Jaromir Dvoracek <jarek@ataxo.com>
- Some smart vendor trying to create interplanetary wormhole by
screwing pci config space during their BIOS update. The side effects
of their failure attempt includes mutilated hardware id, broken
speaker automuting and loosing the entire analog CD connectivity,
thus causing enough collateral damages to collapse the entire
universe. Move along with it.
Please exercise extra cautious when applying BIOS updates.
Reported / Tested by: Pietro Cerutti <gahr@gahr.ch>
- assembled laptop, based on the MSI-1034
(662) which is now becoming MSI-034A.
- Fix no sound issues (on headphones) for Lenovo ThinkCentre A55 due
to global automute table entry which is not applicable for
non-laptops.
Reported / Tested by: Piotr Smyrak <piotr.smyrak@heron.pl>
- Speaker mute control for HP DC7700 since the front headphone jack
does not generate any interesting unsolicited signal/response.
Reported / Tested by: tyop @ irc.freenode.net
Approved by: re (kensmith)
MFC after: 3 days
When item forwarded refence counter is incremented, when item
processed, counter decremented. When counter reaches zero,
apply handler is getting called.
Now it allows to report right connect() call status from user-level
at the right time.
This is much simpler than for ffs since there are many fewer places
where we need to choose between a delayed write and a sync write --
just 5 in msdosfs and more than 30 in ffs.
This is more complete and correct than in ffs. Several places in ffs
are are still missing the choice. ffs_update() has a layering violation
that breaks callers which want to force a sync update (mainly fsync(2)
and O_SYNC write(2)).
However, fsync(2) and O_SYNC write(2) are still more broken than in
ffs, since they are broken for default (non-sync non-async) mounts
too. Both fail to sync the FAT in all cases, and both fail to sync
the directory entry in some cases after losing a race. Async everything
is probably safer than the half-baked sync of metadata given by default
mounts.
us to scale up to sb_max, aka kern.ipc.maxsockbuf.
We do this because there are broken firewalls that will corrupt the window
scale option, leading to the other endpoint believing that our advertised
window is unscaled. At scale factors larger than 5 the unscaled window will
drop below 1500 bytes, leading to serious problems when traversing these
broken firewalls.
With the default maxsockbuf of 256K, a scale factor of 3 will be chosen by
this algorithm. Those who choose a larger maxsockbuf should watch out
for the compatiblity problems mentioned above.
Reviewed by: andre
queue so the output network card must support the same tagging mechanism as
how the frame was input (prepended Ethernet header tag or stripped HW mflag).
Now the vlan Ethernet header is _always_ stripped in ether_input and the mbuf
flagged, only only network cards with VLAN_HWTAGGING enabled would properly
re-tag any outgoing vlan frames.
If the outgoing interface does not support hardware tagging then readd the vlan
header to the front of the frame. Move the common vlan encapsulation in to
ether_vlanencap().
Reported by: Erik Osterholm, Jon Otterholm
MFC after: 1 week
From the OpenSSL advisory:
Andy Polyakov discovered a flaw in OpenSSL's DTLS
implementation which could lead to the compromise of clients
and servers with DTLS enabled.
DTLS is a datagram variant of TLS specified in RFC 4347 first
supported in OpenSSL version 0.9.8. Note that the
vulnerabilities do not affect SSL and TLS so only clients and
servers explicitly using DTLS are affected.
We believe this flaw will permit remote code execution.
Security: CVE-2007-4995
Security: http://www.openssl.org/news/secadv_20071012.txt
leaving space for adding missing options. Negative options are sorted
after removing their "no" prefix, and generic options are sorted before
msdosfs-specific ones.
At least one port (net-mgmt/net-snmp) creates man-pages which are
in the format:
.SH NAME
The Net-SNMP agent \- The snmp agent responds to SNMP queries from management stations.
.PP
.SS "Modules"
At this moment, makewhatis determines the end of the .SH NAME section
as where it finds .SH again, but there is none here, is it "terminated"
by the .SS.
PR: bin/116706
Submitted by: edwin@
Approved by: re (Ken Smith), grog (mentor)
MFC after: 1 week
