error response after clipping the first map entry in the region to be
reserved. This creates a pair of matching entries that should have
been "simplified" back into one, or never created. This change defers
the clipping of that entry until those two vm_map_protect failure
cases have been ruled out.
Reviewed by: alc
Approved by: markj (mentor)
Differential Revision: https://reviews.freebsd.org/D20711
Use the cam_ed copy of ata_params rather than malloc and freeing
memory for it. This reaches into internal bits of xpt a little, and
I'll clean that up later.
Create ata_param_fixup
Create a common fixup routine to do the canonical fixup of the
ata_param fixup. Call it from both the ATA and the ATA over SCSI
paths.
Go ahead and completely fix the ata_params before calling the veto
function. This breaks nothing that uses it in the tree since
ata_params is ignored in storvsc_ada_probe_veto which is the only
in-tree consumer.
Remove a lingering use of splbio().
The buffer must be locked by the caller. No functional change
intended.
Reviewed by: kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
NANDFS has been broken for years. Remove it. The NAND drivers that
remain are for ancient parts that are no longer relevant. They are
polled, have terrible performance and just for ancient arm
hardware. NAND parts have evolved significantly from this early work
and little to none of it would be relevant should someone need to
update to support raw nand. This code has been off by default for
years and has violated the vnode protocol leading to panics since it
was committed.
Numerous posts to arch@ and other locations have found no actual users
for this software.
Relnotes: Yes
No Objection From: arch@
Differential Revision: https://reviews.freebsd.org/D20745
Summary:
PowerPC has two PLT models: BSS-PLT and Secure-PLT. BSS-PLT uses runtime
code generation to generate the PLT stubs. Secure-PLT was introduced with
GCC 4.1 and Binutils 2.17 (base has GCC 4.2.1 and Binutils 2.17), and is a
more secure PLT format, using a read-only linkage table, with the dynamic
linker populating a non-executable index table.
This is the libc, rtld, and kernel support only. The toolchain and build
parts will be updated separately.
Reviewed By: nwhitehorn, bdragon, pfg
Differential Revision: https://reviews.freebsd.org/D20598
MFC after: 1 month
Print warnings for some bad kernel configurations (like NUMA disabled
with multiple domains). Check and report some firmware errors (like
incorrect proximity domain entries).
Differential Revision: https://reviews.freebsd.org/D20416
We now support multiple ITS blocks raising interrupts to a CPU.
Add all available CPUs to the ITS when no NUMA information is
available.
This reverts the check added in r340602, at that tim we did not
suppport multiple ITS blocks for a CPU.
Differential Revision: https://reviews.freebsd.org/D20417
Now that GICV3_IVAR_REDIST is available, GICV3_IVAR_REDIST_VADDR
is unused and can be removed. Drop the define and add a comment.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D20454
had been done years ago. I did. All this time we've only compiled a LINT
kernel for TARGET_ARCH=arm. Now separate LINT-V5 and LINT-V7 configs are
generated and built.
There are two new files in arm/conf, NOTES.armv5 and NOTES.armv7, containing
some of what used to be in the arm NOTES file. That file now contains only
the bits that are common to v5 and v7.
The makeLINT.mk file now creates the LINT-V5 and LINT-V7 files by concatening
sys/conf/NOTES, arm/conf/NOTES, and arm/conf/NOTES.armv{5,7} in that order.
Port the code to block on turnstile instead of yielding, to lock-less
delayed invalidation. The yield might cause tight loop due to priority
inversion.
Since it is impossible to avoid race between block and wake-up, arm
1-tick callout to wakeup when thread blocks itself.
Reported and tested by: mjg
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
MFC after: 2 months
Differential revision: https://reviews.freebsd.org/D20636
into existing files for sugid processes.
Despite using real user id pronounces the intent, it actually breaks
suid coredumps, while not making any difference for non-sugid
processes. The reason for the breakage is that non-existent core file
is created with the effective uid (unless weird hacks like SUIDDIR are
configured).
Then, if user enabled kern.sugid_coredump, core dumping should not
overwrite core files owned by effective uid, but we cannot pretend to
use real uid for dumping.
PR: 68905
admbugs: 358
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
perform a TLB invalidation. A barrier suffices. (See r343876.)
Add a comment to pmap_enter_quick_locked() in order to highlight the
fact that it does not replace valid mappings.
Correct a typo in one of pmap_enter()'s comments.
MFC after: 1 week
Since SES specs do not define mechanism to map enclosure slots to SATA
disks, AHCI EM code I written many years ago appeared quite useless,
that always bugged me. I was thinking whether it was a good idea, but
if LSI HBAs do that, why I shouldn't?
This change introduces simple non-standard mechanism for the mapping
into both AHCI EM and SES code, that makes AHCI EM on capable controllers
(most of Intel's) a first-class SES citizen, allowing it to report disk
physical path to GEOM, show devices inserted into each enclosure slot in
`sesutil map` and `getencstat`, control locate and fault LEDs for specific
devices with `sesutil locate adaX on` and `sesutil fault adaX on`, etc.
I've successfully tested this on Supermicro X10DRH-i motherboard connected
with sideband cable of its S-SATA Mini-SAS connector to SAS815TQ backplane.
It can indicate with LEDs Locate, Fault and Rebuild/Remap SES statuses for
each disk identical to real SES of Supermicro SAS2 backplanes.
MFC after: 2 weeks
(1) pmap_remove(), where it eliminates redundant TLB invalidations by
pmap_remove() and pmap_remove_l3(), and (2) pmap_enter_l2(), where it may
optimize the TLB invalidations by batching them.
Reviewed by: markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D12725
Until r349278, bhyve presented a seg_max to the guest that was too large.
Detect this case and clamp it to the virtqueue size. Otherwise, we would
fail the "too many segments to enqueue" assertion in virtqueue_enqueue().
I hit this by running a guest with a MAXPHYS of 256 KB.
Reviewed by: bryanv cem
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D20703
SES specifications tell: "The Additional Element Status descriptors shall
be in the same order as the status elements in the Enclosure Status
diagnostic page". It allows us to question ELEMENT INDEX that is lower
then values we already processed. There are many SAS2 enclosures with
this kind of problem.
While there, add more specific error messages for cases when ELEMENT INDEX
is obviously wrong. Also skip elements with INVALID bit set.
MFC after: 2 weeks
When some type has 0 elements, saved_individual_element_index was set
to -1 on second type bump, since individual_element_index was not
restored after the first. To me it looks easier just to increment
saved_individual_element_index separately than think when to save it.
MFC after: 2 weeks
Define __daddr_t in _types.h and use it in filio.h
Reported by: ian, bde
Reviewed by: ian, imp, cem
MFC after: 2 weeks
MFC-With: 349233
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20715
- Add rcu list functions.
- Make rcu hlist's foreach macro use rcu calls instead of the non-rcu macro.
- Bump FreeBSD version so we have a checkpoint for the vboxvideo drm driver.
Reviewed by: hps
Approved by: imp (mentor), hps
MFC after: 1 week
Differential Revision: D20719
pwm(9), but also maintains the historical sysctl config interface for
compatiblity with existing apps. The two config systems are not compatible
with each other; if you use both interfaces to change configurations you're
likely to end up with incorrect output or none at all.
upcoming functional changes.
Add an ofw_compat_data table for probing compat strings, and use it to add
PNP data. Remove some stray semicolons at the end of macro definitions,
and add a PWM_LOCK_ASSERT macro to round out the usual suite. Move the
device_t and driver_methods structs to the end of the file. Tweak comments.
Previously nandsim_chip_status returned EINVAL iff both of user-provided
chip->ctrl_num and chip->num were out of bounds. If only one failed the
bounds check arbitrary memory would be read and returned.
The NAND framework is not built by default, nandsim is not intended for
production use (it is a simulator), and the nandsim device has root-only
permissions.
admbugs: 827
Reported by: Daniel Hodson of elttam
MFC after: 3 days
Security: kernel information leak or DoS
Sponsored by: The FreeBSD Foundation
With this opcode it is possible to match TCP packets with specified
MSS option, whose value corresponds to configured in opcode value.
It is allowed to specify single value, range of values, or array of
specific values or ranges. E.g.
# ipfw add deny log tcp from any to any tcpmss 0-500
Reviewed by: melifaro,bcr
Obtained from: Yandex LLC
MFC after: 1 week
Sponsored by: Yandex LLC
If we take the slow path for forwarding we should still tell our
firewalls (hooked through pfil(9)) that we're forwarding. Pass the
ip_output() flags to ip_output_pfil() so it can set the PFIL_FWD flag
when we're forwarding.
MFC after: 1 week
Sponsored by: Axiado
