about the chip including the erase block size at attach time.
Also add myself to the copyrights since at this point svn blame would point
to me as the culprit for much of this.
all over the place. Also pass the softc as the arg to all the internal
functions instead of passing a device_t and calling device_get_softc() in
each function.
before starting them.
Using the wait-before logic would make sense if there was useful time-
consuming work that could be done between the end of one write and the
beginning of the next, but it also requires doing the wait-for-ready before
reading, because a prior write or erase could still be in progress. Reading
is the far more common case, so adding a whole extra bus transaction to
check for ready before each read would soak up any small gains that might be
had from doing async writes.
Such pages are re-enqueued at the end of the fault handler, preserving
LRU. Rather than performing two separate operations per fault, simply
requeue the page at the end of the fault (or bump its activation count
if it resides in PQ_ACTIVE, avoiding the page queue lock entirely).
This elides some page lock and page queue lock operations in common
cases, e.g., CoW faults.
Note that we must still dequeue the source page for "optimized" CoW
faults since the page may not remain enqueued while it is moved to
another object.
Reviewed by: alc, kib
Tested by: pho
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D14625
In many cases the page is not enqueued so the change will have no
effect. However, the change is needed to support an optimization in
the fault handler and in some cases (sendfile, the buffer cache) it
was being emulated by the caller anyway.
Reviewed by: alc
Tested by: pho
MFC after: 2 weeks
X-Differential Revision: https://reviews.freebsd.org/D14625
The new page does not belong to a VM object, but the page daemon does
not expect to encounter such pages.
Reviewed by: alc, kib
Tested by: pho
MFC after: 1 week
X-Differential Revision: https://reviews.freebsd.org/D14625
for the same condition that the preceeding lines checked for and would have
returned EIO, so the assert could never possibly trigger (sc_sectorsize must
inherently be an integer multiple of FLASH_PAGE_SIZE).
transfers data in both directions at once. When writing to the device,
use a dummy buffer for the incoming data, not the same buffer as the
outgoing data. Writes are done in FLASH_PAGE_SIZE chunks, which is only
256 bytes, so just put the dummy buffer into the softc.
no longer relevant (read: most of what was there) and adds some
quick links to point newcomers in the right direction.
Reviewed by: imp@
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D14680
Remove obsolete example. All services has they own example.
This example also show old type of limiting method which is
not recommended to use.
Reviewed by: bcr@
Differential Revision: https://reviews.freebsd.org/D14607
Link __bswap[ds]i2() intrinsics in to libzstd for riscv, where the C runtime
apparently lacks such intrinsics.
Broken in r330894.
Reported by: asomers
Sponsored by: Dell EMC Isilon
The slow path is always taken when lockstat is enabled. This induces
rdtsc (or other) calls to get the cycle count even when there was no
contention.
Still go to the slow path to not mess with the fast path, but avoid
the heavy lifting unless necessary.
This reduces sys and real time during -j 80 buildkernel:
before: 3651.84s user 1105.59s system 5394% cpu 1:28.18 total
after: 3685.99s user 975.74s system 5450% cpu 1:25.53 total
disabled: 3697.96s user 411.13s system 5261% cpu 1:18.10 total
So note this is still a significant hit.
LOCK_PROFILING results are not affected.
where we had not hit global dirty limits but a single queue was starved
for space by dirty buffers. A single buf_daemon is maintained for now.
Add a bd_speedup() when we are low on bufspace. This can happen due to SUJ
keeping many bufs locked until a cg block is written. Document this with
a comment.
Fix sysctls to work with per-domain variables. Add more ddb debugging.
Reported by: pho
Reviewed by: kib
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14705
Some parts of MI modules will soon depend on whether EFI is available
or not. Add EFI to the list of kernel options so we can use it in
the modules build.
Current arp/nd code relies on the feedback from the datapath indicating
that the entry is still used. This mechanism is incorporated into the
arpresolve()/nd6_resolve() routines. After the inpcb route cache
introduction, the packet path for the locally-originated packets changed,
passing cached lle pointer to the ether_output() directly. This resulted
in the arp/ndp entry expire each time exactly after the configured max_age
interval. During the small window between the ARP/NDP request and reply
from the router, most of the packets got lost.
Fix this behaviour by plugging datapath notification code to the packet
path used by route cache. Unify the notification code by using single
inlined function with the per-AF callbacks.
Reported by: sthaug at nethelp.no
Reviewed by: ae
MFC after: 2 weeks
softc for an async unit attention. CAM locks, sometimes, the periph
lock and other times does not. We were taking the lock always and
running into lock recursion issues on a non-recursive lock. Now we
take it selectively. It's not clear why xpt takes the lock selectively
before calling us, though, and that's still under investigation.
Reported by: avg
PR: 226510 (same panic, differnt circumstances)
Sponsored by: Netflix
Followup to r313780. Also prefix ext2's and nandfs's versions with
EXT2_ and NANDFS_.
Reported by: kib
Reviewed by: kib, mckusick
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D9623
In out of memory scenarios (where one of these allocations failed but
other(s) did not), nm(1) could reference the uninitialized value of these
allocations (undefined behavior).
Always initialize any successful allocations as the most expedient
resolution of the issue. However, I would encourage upstream elftoolchain
contributors to clean up the error path to just abort immediately, rather
than proceeding sloppily when one allocation fails.
Reported by: Coverity
Sponsored by: Dell EMC Isilon
These macros take an existing ioctl(2) command and replace the length
with the specified length or length of the specified type respectively.
These can be used to define commands for 32-bit compatibility with fewer
opportunities for cut-and-paste errors then a whole new definition.
Reviewed by: cem, kib
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14706
Like r331073, eliminate a UB by fully initializing the struct with a designated
initializer. Note that the similar src_dtt is not fully used, so a similar
treatment was not absolutely required. I chose to leave it alone. It
wouldn't hurt to do the same thing, though.
Reported by: Coverity
Sponsored by: Dell EMC Isilon
Occasionally poll for signals during large reads of the /dev/u?random
devices. This allows cancellation via SIGINT of accidental invocations of
very large reads. (A 2GB /dev/random read, which takes about 10 seconds on
my 2017 AMD Zen processor, can be aborted.)
I believe this behavior was intended since 2014 (r273997), just not fully
implemented.
This is motivated by a potential getrandom(2) interface that may not
explicitly forbid extremely large reads on 64-bit platforms -- even larger
than the 2GB limit imposed on devfs I/O by default. Such reads, if they are
to be allowed, should be cancellable by the user or administrator.
Reviewed by: delphij
Approved by: secteam (delphij)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14684
