These mappings are never visible to userspace as they get replaced when
the amd64 pmap is bootstrapped, but there is no need to set PG_U in the
first place.
Reviewed by: alc, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24547
we have crc32(const void *, size_t) in libsa. Unfortunately zlib has
crc32(long, const unigned char *, unsigned) and we have conflict.
Since we do build libsa with zlib, we can use zlib version instead.
Reviewed by: allanjude
Differential Revision: https://reviews.freebsd.org/D24068
The SCR, scratch register was not present on the 8250 and 8250B UART, so we
can use to test if we actually do have serial port.
We need this test because some systems will get long delays while attempting
to write to non-existing port and this will slow down the console IO
to extreme.
MFC after: 1 week
The vectx API, computes the hash for verifying a file as it is read.
This avoids the overhead of reading files twice - once to verify, then
again to load.
For doing an install via loader, avoiding the need to rewind
large files is critical.
This API is only used for modules, kernel and mdimage as these are the
biggest files read by the loader.
The reduction in boot time depends on how expensive the I/O is
on any given platform. On a fast VM we see 6% improvement.
For install via loader the first file to be verified is likely to be the
kernel, so some of the prep work (finding manifest etc) done by
verify_file() needs to be factored so it can be reused for
vectx_open().
For missing or unrecognized fingerprint entries, we fail
in vectx_open() unless verifying is disabled.
Otherwise fingerprint check happens in vectx_close() and
since this API is only used for files which must be verified
(VE_MUST) we panic if we get an incorrect hash.
Reviewed by: imp,tsoome
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org//D23827
The vectx API, computes the hash for verifying a file as it is read.
This avoids the overhead of reading files twice - once to verify, then
again to load.
For doing an install via loader, avoiding the need to rewind
large files is critical.
This API is only used for modules, kernel and mdimage as these are the
biggest files read by the loader.
The reduction in boot time depends on how expensive the I/O is
on any given platform. On a fast VM we see 6% improvement.
For install via loader the first file to be verified is likely to be the
kernel, so some of the prep work (finding manifest etc) done by
verify_file() needs to be factored so it can be reused for
vectx_open().
For missing or unrecognized fingerprint entries, we fail
in vectx_open() unless verifying is disabled.
Otherwise fingerprint check happens in vectx_close() and
since this API is only used for files which must be verified
(VE_MUST) we panic if we get an incorrect hash.
Reviewed by: imp,tsoome
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org//D23827
LLD 10.0.0 changed the behavior of the -Ttext option, so that using
-Ttext=0x0 now causes linking of the loaders to fail with:
ld: error: output file too large: 18446744073707016908 bytes
I reported this in https://bugs.llvm.org/show_bug.cgi?id=44715, and
initially reverted the upstream change in r357259 to work around it.
However, after some discussion with Fangrui Song in the upstream ticket,
I think we can classify this as an unfortunate interaction between using
-Ttext=0 in combination with --no-rosegment. (We added the latter
in r332090, because btxld does not correctly handle input with more
than 2 PT_LOAD segments.)
Fangrui suggested to use a linker script instead, and Warner was already
attempting this in r305353, but had to revert it due to "crypto-using
boot problems" (not sure what those were :).
This review updates the stand/i386/boot.ldscript to handle more
sections, inserts some symbols like _edata and such that we use in
libsa, and also discards any .interp section.
It uses ORG which is defined on the linker command line using
--defsym ORG=value to set the start of all the sections.
Reviewed by: imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D23952
smbios used to be an i386 only kinda weird quirk to the x86
architecture. But UEFI picked it up, dusted it off and now it's many
other locations. Make it base technology by moving it to libsa and
fixing up the compliation. The code has issues with unaligned access
still, but that will be addressed in a followup commit.
Differential Revision: https://reviews.freebsd.org/D23660
Create a ptov() function. It's basically the same as the btx PTOV
macro, but works everywhere. smbios needs this to translate addresses,
but the translation differs between BIOS booting and EFI booting. Make
it a function so one smbios.o can be used everywhere. Provide
definitions for it in the two loaders affected.
Differential Revision: https://reviews.freebsd.org/D23660
vdev_read_pad2() does read VDEV_PAD_SIZE of data, and will copy size bytes
of it, hence, we need buffer of VDEV_PAD_SIZE bytes.
Issue introduced in r357497.
Reported by: se
CD boot is broken for some systems since bioscd and biosdisk merge. The issue is that we can not use anything else than int 13 ah=0x4b to query cd information.
The patch does restore the same probe as was originally used in bioscd.c. Additionally extra buffer padding is used to avoid memory corruption caused by some systems.
PR: 234031
Reported by: ultramage and others
MFC after: 1 day
stand/i386/gptboot/gptldr.S:141:3: error: value of 36878 is too large for field of 2 bytes.
jmp MEM_JMP # Start BTX
^
Use the same construct as in stand/i386/boot2/boot1.S, which ensures the
jump distance does not become too large.
MFC after: 3 days
As a new x86 CPU vendor, Chengdu Haiguang IC Design Co., Ltd (Hygon)
is a joint venture between AMD and Haiguang Information Technology Co.,
Ltd., aims at providing x86 processors for China server market.
The first generation Hygon processor(Dhyana) shares most architecture
with AMD's family 17h, but with different CPU vendor ID("HygonGenuine")
and PCI vendor ID(0x1d94) and family series number 18h(Hygon negotiated
with AMD to confirm that only Hygon use family 18h).
To enable Hygon Dhyana support in FreeBSD, add new definitions
HYGON_VENDOR_ID("HygonGenuine") and X86_VENDOR_HYGON(0x1d94) to identify
Hygon Dhyana CPU.
Initialize the CPU features(topology, local APIC ext, MSI, TSC, hwpstate,
MCA, DEBUG_CTL, etc) for amd64 and i386 mode by sharing the code path of
AMD family 17h.
The changes have been applied on FreeBSD 13.0-CURRENT and tested
successfully on Hygon Dhyana processor.
References:
[1] Linux kernel patches for Hygon Dhyana, merged in 4.20:
https://git.kernel.org/tip/c9661c1e80b609cd038db7c908e061f0535804ef
[2] MSR and CPUID definition:
https://www.amd.com/system/files/TechDocs/54945_PPR_Family_17h_Models_00h-0Fh.pdf
Submitted by: Pu Wen <puwen@hygon.cn>
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D23163
partitions can have 128 partitions, so parse contiguous digits and then
validate that the number is between 1-128 inclusive.
I'm not sure 128 is a hard limit in the GPT standard, but it's the common
number in use, and it's a better upper limit than 9.
This uses the new layout of the upstream repository, which was recently
migrated to GitHub, and converted into a "monorepo". That is, most of
the earlier separate sub-projects with their own branches and tags were
consolidated into one top-level directory, and are now branched and
tagged together.
Updating the vendor area to match this layout is next.
For all the INT13 calls, use symbolic names instead of magic numbers. This makes
it easier to understand what the code is doing w/o a trip to google to find what
these numbers mean.
Update a bunch of Makefile.depend files as
a result of adding Makefile.depend.options files
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22494
Port illumos change: https://www.illumos.org/issues/11667
Move lz4.c out of zfs tree to opensolaris/common/lz4, adjust it to be
usable from kernel/stand/userland builds, so we can use just one single
source. Add lz4.h to declare lz4_compress() and lz4_decompress().
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D22037
Add ficl words for isvirtualized
and move ficl inb and outb words to ficl/x86/sysdep.c
so can be shared by i386 and amd64
Reviewed by: imp bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22069
Add settable variables to control teken default color attributes.
The supported colors are 0-7 or basic color names:
black, red, green, brown, blue, magenta, cyan, white.
The current implementation does add some duplication which will be addressed
later.
--gc-sections is not really useful unless we generate sections with
-ffunction-sections -fdata-sections
While there, i386/loader would win from --gc-sections too.
Replace mini cons25 emulator with teken, this does enable us proper console
terminal for loader and will make it possible to implement different
back end callbacks to draw to screen.
At this time we still only "draw" in text mode.
ufsread.c grows a dependency on __ashldi3 with llvm90. Grab ashldi3.c out of
compiler-rt rather than trying to link against libsa (for now).
-Wno-missing-prototypes is necessary to compile ashldi3.c standalone.
Reviewed by: imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21291
Many components under stand/ had CLANG_NO_IAS added when Clang's
Integrated Assembler did not handle .codeNN directives. Clang gained
support quite some time ago, so we can build stand/ with IAS.
In some cases there were small differences in generated object output.
In the case of gptzfsboot however using GNU as or Clang IAS to assemble
gptldr.S resulted in identical final gptzfsboot binary output.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D11115
Many components under stand/ had CLANG_NO_IAS added when Clang's
Integrated Assembler (IAS) did not handle .codeNN directives. Clang
gained support quite some time ago, and we can now build stand/ with
IAS. In most cases IAS- and GNU as-assembled boot components were
identical, and CLANG_NO_IAS was already removed from other components.
Clang IAS produces different output for some components, including
pxeldr, so CLANG_NO_IAS was not previously removed for those.
In the case of pxeldr the difference is that IAS adds a size override
prefix (67h) to three instructions to specify a 32-bit address, even
though the two high bytes are zero and the address fits in 16 bits.
this wastes three bytes per instruction and causes some additional nop
npadding to be required elsewhere in the object, but pxeboot is not
size-constrained so it doesn't matter.
Sponsored by: The FreeBSD Foundation
Many components under stand/ had CLANG_NO_IAS added when Clang's
Integrated Assembler (IAS) did not handle .codeNN directives. Clang
gained support quite some time ago, and we can now build stand/ with
IAS. In most cases IAS- and GNU as-assembled boot components were
identical, and CLANG_NO_IAS was already removed from other components.
Clang IAS produces different output for some components, including
cdboot, so CLANG_NO_IAS was not previously removed for those.
In the case of cdboot the difference is that IAS adds a size override
prefix (67h) to many instructions to specify a 32-bit address, even
though the two high bytes are zero. This wastes three bytes per
instance, but as cdboot is not size-constrained it doesn't matter.
Padding is also different in one case; Clang used two one-byte nops
while GNU as used a single two-byte xchg %eax, %eax. In any case, there
is no functional change.
Sponsored by: The FreeBSD Foundation
Many components under stand/ had CLANG_NO_IAS added when Clang's
Integrated Assembler (IAS) did not handle .codeNN directives. Clang
gained support quite some time ago, and we can now build stand/ with
IAS. In most cases IAS- and GNU as-assembled boot components were
identical, and CLANG_NO_IAS was already removed from other components.
Clang IAS produces different output for some components, including
boot2, so CLANG_NO_IAS was not previously removed for those.
In the case of boot2 the difference is that IAS produces a larger
encoding for one instruction (the testb at the beginning of read).
GNU as produces:
2e f6 06 b0 08 80
while IAS includes an address size override prefix (67) and produces:
2e 67 f6 05 b3 08 00 00 80
This results in three fewer NOPs elsewhere in boot2 but no functional
change, so switch to IAS for boot2.
(We can separately pursue improved 16-bit IAS support with the LLVM
developers.)
Sponsored by: The FreeBSD Foundation
We should support removing vdev from boot pool. Update loader zfs reader
to support com.delphix:removing.
Reviewed by: allanjude
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D18901
The chain command can be used to chain load another binary.
If veriexec is enabled we should verify it first.
Note that on EFI systems the verification was already done
through firmware, assuming that Secure Boot was enabled there.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: sjg
MFC after: 1 week
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D20952
NANDFS has been broken for years. Remove it. The NAND drivers that
remain are for ancient parts that are no longer relevant. They are
polled, have terrible performance and just for ancient arm
hardware. NAND parts have evolved significantly from this early work
and little to none of it would be relevant should someone need to
update to support raw nand. This code has been off by default for
years and has violated the vnode protocol leading to panics since it
was committed.
Numerous posts to arch@ and other locations have found no actual users
for this software.
Relnotes: Yes
No Objection From: arch@
Differential Revision: https://reviews.freebsd.org/D20745
* Fix boot env back compat
zfsboot must try zfsloader before loader in order to remain compatible
with boot environments created prior to zfs functionality being rolled
into loader proper.
* Improve comments in zfsboot
Explain the significance of the load path order, and put the comment
about looping through the paths in the appropriate scope.
Obtained From: TrueNAS commit 4c60c62fcf0b6b6eac98ee8d46e7bbea64bc86f5
Submitted by: Ryan Moeller <ryan@freqlabs.com>
If we do have GPT on disk, read the disk size from it and do not
call int13.
Since int13 does report bogus informatiopn too often, rather trust the
partition table. We are using the same strategy with loader.
MFC after: 1 month
illumos update: https://www.illumos.org/issues/10598
Add map-vdisk and unmap-vdisk commands to create virtual disk interface on top of file. This will allow to use disk image from file system to load and start the kernel.
By mapping file, we create vdiskX device, the device will be listed by lsdev [-v] and can be accessed directly as ls vdisk0p1:/path or can be used as value for currdev variable.
vdisk strategy function does not use bcache as we have bcache used with backing file. vdisk can be unmapped when all consumers have closed the open files.
In first iteration we do not support the zfs images because zfs pools do keep the device open (there is no "zpool export" mechanism). Adding zfs support is relatively simple, we just need to run zfs disk probe after mapping is done.
Differential Revision: https://reviews.freebsd.org/D19733
